Evaluation the stress distribution in root canals by 3D finite element analysis after the materials used in reattaching the vertically root fractured fragments.

The aim was to evaluate the effect of stress distribution on vertical, horizontal, and oblique forces on the tooth model after reattaching the fragments of the maxillary incisor with vertical root fracture (VRF) using different materials, by 3D finite element analysis (FEA). Tooth with a root canal, spongious, and cortical bone models were designed. VRF was modeled on a tooth with 4 different re-attachment models: Group 1: dual-cure cement (DC)+fiber reinforced composite (FRC), Group 2: DC+polyethylene fiber, Group 3: DC+glass fiber, and Group 4:DC. 100 N force was applied in 3 different directions. Maximum principal stresses (σmax) of dentin, and re-attachment materials were evaluated on colored images. The highest σmax values ​​were on the repair materials under vertical forces for Groups 1 and 4, respectively; Groups 2 and 3 showed similarity. The highest σmax values in repair materials under horizontal and oblique forces were observed in Group 3 however the lowest σmax values in repair materials under oblique and horizontal forces were observed in Group 1. The stress values ​​on repair materials gradually increased respectively starting from horizontal to vertical. As the elasticity modulus of the repair materials increased, the stress values ​​on root dentin increased. Through all force directions, except vertical forces, lower stress values were observed with FRC. The fracture resistance was bigger when using solely FRC or dual-cure resin cement in comparison to fiber-supported designs. Adding polyethylene fiber to re-restorations decreased stress values ​​compared to glass fiber addition. Therefore, when adding fibers, polyethylene fiber will be advantageous.

Evaluation the stress distribution in root canals by 3D finite element analysis after the materials used in reattaching the vertically root fractured fragments

Abstract The aim was to evaluate the effect of stress distribution on vertical, horizontal, and oblique forces on the tooth model after reattaching the fragments of the maxillary incisor with vertical root fracture (VRF) using different materials, by 3D finite element analysis (FEA). Tooth with a root canal, spongious, and cortical bone models were designed. VRF was modeled on a tooth with 4 different re-attachment models: Group 1: dual-cure cement (DC)+fiber reinforced composite (FRC), Group 2: DC+polyethylene fiber, Group 3: DC+glass fiber, and Group 4:DC. 100 N force was applied in 3 different directions. Maximum principal stresses (σmax) of dentin, and re-attachment materials were evaluated on colored images. The highest σmax values ​​were on the repair materials under vertical forces for Groups 1 and 4, respectively; Groups 2 and 3 showed similarity. The highest σmax values in repair materials under horizontal and oblique forces were observed in Group 3 however the lowest σmax values in repair materials under oblique and horizontal forces were observed in Group 1. The stress values ​​on repair materials gradually increased respectively starting from horizontal to vertical. As the elasticity modulus of the repair materials increased, the stress values ​​on root dentin increased. Through all force directions, except vertical forces, lower stress values were observed with FRC. The fracture resistance was bigger when using solely FRC or dual-cure resin cement in comparison to fiber-supported designs. Adding polyethylene fiber to re-restorations decreased stress values ​​compared to glass fiber addition. Therefore, when adding fibers, polyethylene fiber will be advantageous.

Resumo O objetivo foi avaliar o efeito da distribuição de estresse nas forças verticais, horizontais e oblíquas no modelo de dente após a recolocação dos fragmentos do incisivo superior com fratura radicular vertical (FRV) usando diferentes materiais, por meio da análise de elementos finitos (FEA) em 3D. Métodos: Foram projetados modelos de dentes com canal radicular, osso esponjoso e cortical. A FRV foi modelada em um dente com 4 modelos diferentes de reataque, como Grupo 1: cimento de cura dupla (DC) + compósito reforçado com fibra (FRC), Grupo 2: DC + fibra de polietileno, Grupo 3: DC + fibra de vidro e Grupo 4: DC. Foi aplicada uma força de 100 N em 3 direções diferentes. As tensões principais máximas (σmax) da dentina e os materiais de recolocação foram avaliados em imagens coloridas. Resultados: Os valores mais altos de σmax foram registrados nos materiais de reparo sob forças verticais para os Grupos 1 e 4, respectivamente; os Grupos 2 e 3 apresentaram semelhança. Os valores mais altos de σmax nos materiais de reparo sob forças horizontais e oblíquas foram observados no Grupo 3; no entanto, os valores mais baixos de σmax nos materiais de reparo sob forças oblíquas e horizontais foram observados no Grupo 1. Os valores de tensão nos materiais de reparo aumentaram gradualmente, respectivamente, começando da holizontal para a vertical. À medida que o módulo de elasticidade dos materiais de reparo aumentava, os valores de tensão na dentina da raiz aumentavam. Em todas as direções de força, exceto nas forças verticais, foram observados valores de tensão mais baixos com o FRC. Conclusões: a resistência à fratura foi maior quando se utilizou apenas FRC ou cimento resinoso de cura dupla em comparação com os designs com suporte de fibra. A adição de fibra de polietileno às restaurações diminuiu os valores de tensão em comparação com a adição de fibra de vidro. Portanto, ao adicionar fibras, a fibra de polietileno será vantajosa.

Evaluation of Different Root Canal Obturation Techniques in Internal Root Resorption of Three-Dimensional Printed Teeth Manufactured Using Computer Software.

The objective of this study was to evaluate and compare the filling ability of various root canal obturation techniques on the internal root resorption (IRR) cavities of replicated tooth samples manufactured using computer software and a three-dimensional (3D) printer. Orthographic images and root structures of a healthy upper maxilla central incisor in determined volumes and sizes were drawn as a prototype with the aid of computer software. Using the same software, an IRR defect was also modeled. These two images were then transferred to the AutoDesk Fusion 360 3D modeling program (AutoDesk, San Rafael, CA) for meshing. Afterward, the tooth model was transferred to a 3D modeling and prototyping program (RhinoCeros 3D; Robert McNells & Assoc., New York) and printed on a 3D printer. Eighty replicas with IRR were manufactured and divided into four groups (n = 20 per group) according to the obturating techniques as follows: Group 1: Cold lateral compaction (CLC), Group 2: Core Carrier System (GuttaCore), Group 3: Injectable Cold Filling (GuttaFlow® BioSeal), and Group 4: Continuous Wave Obturation System (Elements Free). After root canal filling, replicas were scanned with a high-resolution micro-computed tomography system (SkyScan 1172; Bruker-microCT, Kontich, Belgium), data regarding voids (unobturated areas) inside the IRR defects were statistically analyzed using nonparametric Kruskal-Wallis tests. A pairwise comparison between the tested groups showed that Groups 3 and 4 had significantly fewer voids compared with Groups 1 and 2 in IRR defects (p < 0.05). Group 1/Group 2 and Group 3/Group 4 had similar results in terms of voids and there were no statistically significant differences (p > 0.05). The injectable cold filling system (GuttaFlow BioSeal) and the injectable continuous wave obturation system (Elements Free) successfully obturated the pathological IRR irregularities when compared with CLC and core carrier (GuttaCore) systems.

Comparison of Walking-Bleaching and Photon-Initiated Photoacoustic Streaming Techniques in Tooth Color Change of Artificially Colored Teeth.

Background and objective: The aim of this study is to compare the bleaching effect of photon-induced photoacoustic streaming (PIPS) using carbamide peroxide or sodium perborate-20% hydrogen peroxide (H2O2) compared with walking-bleaching techniques using sodium perborate-20% H2O2 or carbamide peroxide without PIPS on artificially colored teeth. Materials and methods: Root canal treatments of 85 extracted human maxillary central incisors were completed and artificially stained using sheep's blood. Teeth were randomly grouped into five groups according to the bleaching techniques to be tested: Group 1: walking bleaching with carbamide peroxide; Group 2: walking bleaching with sodium perborate-20% H2O2; Group 3: PIPS+carbamide peroxide; Group 4: PIPS+sodium perborate-20% H2O2; and Group 5: control. Experimental specimens were bleached for 3 weeks. Buccal surfaces of the crowns were used for spectrophotometric measurements, limited with a 7-mm external diameter rounded strip, before bleaching and on days 7, 14, and 21. The total change in color (ΔE*) were analyzed with Welch's ANOVA at a significance level of p = 0.05 and Tamhane post-hoc test was used for multiple comparisons. Results: Starting from the second week, Group 4 showed significantly better bleaching effect compared with the other groups (p < 0.05). The other experimental groups also have bleaching effects, but there was no statistically significant difference between Group 1, Group 2, and Group 3 (p > 0.05). Conclusions: Sodium perborate-20% H2O2 activated with PIPS gave a bleaching effect superior to that of walking-bleaching techniques or PIPS using with carbamide peroxide.

Nematode-Associated Bacteria: Production of Antimicrobial Agent as a Presumptive Nominee for Curing Endodontic Infections Caused by Enterococcus faecalis.

Xenorhabdus and/or Photorhabdus bacteria produce antibacterial metabolites to protect insect cadavers against food competitors allowing them to survive in nature with their nematode host. The effects of culture supernatant produced by Xenorhabdus and Photorhabdus spp. were investigated against the multidrug-resistant dental root canal pathogen Enterococcus faecalis. The efficacy of seven different cell-free supernatants of Xenorhabdus and Photorhabdus species against E. faecalis was assessed with overlay bioassay and serial dilution techniques. Additionally, time-dependent inactivation of supernatant was evaluated. Among the seven different bacterial species, X. cabanillasii produced the strongest antibacterial effects. Loss of bioactivity in a phosphopantetheinyl transferase-deficient mutant of X. cabanillasii indicated that this activity is likely based on non-ribosomal peptide synthetases (NRPSs) or polyketide synthases (PKSs). Subsequent in silico analysis revealed multiple possible biosynthetic gene clusters (BGCs) in the genome of X. cabanillasii including a BGC homologous to that of zeamine/fabclavine biosynthesis. Fabclavines are NRPS-derived hexapeptides, which are connected by PKS-derived malonate units to an unusual polyamine, also PKS-derived. Due to the known broad-spectrum bioactivity of the fabclavines, we generated a promoter exchange mutant in front of the fabclavine-like BGC. This leads to over-expression by induction or a knock-out by non-induction which resulted in a bioactive and non-bioactive mutant. Furthermore, MS and MS2 experiments confirmed that X. cabanillasii produces the same derivatives as X. budapestensis. The medicament potential of 10-fold concentrated supernatant of induced fcl promoter exchanged X. cabanillasii was also assessed in dental root canals. Calcium hydroxide paste, or chlorhexidine gel, or fabclavine-rich supernatant was applied to root canals. Fabclavine-rich supernatant exhibited the highest inactivation efficacy of ≥3 log10 steps CFU reduction, followed by calcium hydroxide paste (≤2 log10 step). The mean percentage of E. faecalis-free dental root canals after treatment was 63.6, 45.5, and 18.2% for fabclavine, calcium hydroxide, and chlorhexidine, respectively. Fabclavine in liquid form or preferably as a paste or gel formulation is a promising alternative intracanal medicament.

Efficacy of Two Different Nickel-Titanium Rotary Systems in Retreatment Procedure With or Without Laser-Activated Irrigation: An In Vitro Study.

Objective: The aim of this study was to compare the efficacy of HyFlex EDM (Coltene/Whaledent, Altstätten, Switzerland) and ProTaper Universal Retreatment Nickel-Titanium (NiTi) Systems [The ProTaper Universal Retreatment (PTR), Dentsply Maillefer, Ballaigues, Switzerland] in the removal of the root canal filling materials with or without laser activated irrigation. Materials and methods: The root canals of 60 human mandibular premolars were instrumented with K files up to size 35 at a working length; the step-back procedure was performed in 1 mm increments up to size 50. Next, the teeth were obturated using the lateral compaction technique with gutta-percha and resin-based sealer, and they were randomly divided into two groups (n = 30) according to the retreatment systems: PTR and HyFlex EDM NiTi rotary files. Then, each group was divided into two subgroups (n = 15), laser [photon-induced photo-acoustic streaming (PIPS); Fotona, Ljubljana, Slovenia] activated irrigation and conventional needle irrigation group. Following these procedures, the specimens were evaluated using micro-computed tomography. Results: There was no significant difference between the instrumentation systems regarding the cleaning efficacy (χ2 = 0.754; p = 0.86). Additionally, PIPS method did not have a significant effect on the removal of the filling material compared to conventional needle irrigation. Conclusions: Both instrumentation systems were effective in removing the filling material, but neither was able to remove the filling material completely. PIPS method did not show a significant additional effect regarding the removal of filling material.

A Novel Protein Testing Model to Assay the Efficacy of Multiple Irrigation Activation Techniques for Removal of Ex Vivo Biomolecular Film.

OBJECTIVE: This study aimed to compare the debris removal efficacies of irrigation activation techniques using ex vivo biomolecular film. MATERIALS AND METHODS: Root canals of 50 human mandibular premolars were prepared, and freshly prepared collagen solutions were applied into the root canals using a peristaltic pump. Specimens were randomly divided into the five groups and irrigated with 3 mL of 5.25% sodium hypochlorite (NaOCl): G1 (needle irrigation and control group): a 27-gauge notched-tip irrigation needle (Endo-Eze; Ultradent, South Jordan, UT); G2, Vibringe sonic irrigation system (VSS) (Vibringe B.V. Corp., Amsterdam, Netherlands); G3, EndoActivator sonic irrigation system (EA) (Dentsply Tulsa Dental Specialties, Tulsa, OK); G4, passive ultrasonic irrigation (PUI) (EMS, Nyon, Sweden); and G5, photon-induced photoacoustic streaming (PIPS) (Fotona, Ljubljana, Slovenia). Postirrigation solution was collected in beakers containing 3% sodium thiosulfate by which NaOCl solution was neutralized. Residual protein levels in NaOCl solution were evaluated by the Bradford method. Data were analyzed using ANOVA with Duncan post hoc tests (α = 0.05). RESULTS: PIPS (laser-activated irrigation) method removed more artificial collagen than other experimental groups (EA, PUI, VSS) or the control group (p ≤ 0.05). There were no statistical differences among the EA, PUI, and VSS groups. The PIPS, PUI, and EA groups were superior compared with the conventional irrigation (p ≤ 0.05); however, there were no significant differences between VSS and the conventional irrigation groups. CONCLUSIONS: Although all the methods and techniques examined in this study were suitable in extruding the ex vivo biomolecular film, the PIPS method was found significantly more effective than all the other tested groups (p ≤ 0.05).

A comparative study of cone-beam computed tomography and periapical radiographs in decision-making after endodontic instrument fractures.

PURPOSE: This study aimed to compare the diagnostic efficacies of periapical radiographs (PRs) and cone-beam computed tomography (CBCT) scans on clinicians' decision-making in diagnosing and providing treatment of fractured instruments in root canals during glide path preparation. METHODS: 40 maxillary molar teeth were selected and randomly divided into 4 groups. In each experimental group (n = 10), Hedstroem stainless steel instruments were fractured in mesiobuccal (MB) or distobuccal (DB) root canals. In group 1 (#0.06), group 2 (#0.08), group 3 (#0.10), and group 4 (#0.15), instruments were forced to fracture. PRs and CBCT scans were evaluated and compared. Observers were asked to use the following scoring system to decide whether to: 1. remove the fragment; 2. leave the fragment in situ; 3. bypass the fragment; or 4. use a surgical approach for removing the fragment. RESULTS: CBCT observers mostly decided on removing and bypassing the fractured fragment, while radiograph observers mostly decided to leave fragments in situ. However, there was no significant difference between these parameters when CBCT scans were compared to PRs for decision-making of the fractured instruments (p≥0.05) regarding different sizes of root canal instruments. CONCLUSIONS: In decision-making regarding fractured instruments during glide path preparation, clinicians should strategize treatment options based on variables using high-resolution images that reflect accurate scenarios through PRs or CBCT scans that also take into account low radiation dosage in situ PRs have precedence for a diagnostic approach.

Evaluation of Temperature and Stress Distribution on 2 Different Post Systems Using 3-Dimensional Finite Element Analysis.

BACKGROUND The mouth is exposed to thermal irritation from hot and cold food and drinks. Thermal changes in the oral cavity produce expansions and contractions in tooth structures and restorative materials. The aim of this study was to investigate the effect of temperature and stress distribution on 2 different post systems using the 3-dimensional (3D) finite element method. MATERIAL AND METHODS The 3D finite element model shows a labio-lingual cross-sectional view of the endodontically treated upper right central incisor and supporting periodontal ligament with bone structures. Stainless steel and glass fiber post systems with different physical and thermal properties were modelled in the tooth restored with composite core and ceramic crown. We placed 100 N static vertical occlusal loading onto the center of the incisal surface of the tooth. Thermal loads of 0°C and 65°C were applied on the model for 5 s. Temperature and thermal stresses were determined on the labio-lingual section of the model at 6 different points. RESULTS The distribution of stress, including thermal stress values, was calculated using 3D finite element analysis. The stainless steel post system produced more temperature and thermal stresses on the restorative materials, tooth structures, and posts than did the glass fiber reinforced composite posts. CONCLUSIONS Thermal changes generated stresses in the restorative materials, tooth, and supporting structures.

Comparison of apical microleakage of dual-curing resin cements with fluid-filtration and dye extraction techniques.

BACKGROUND: Endodontically treated teeth with excessive loss of tooth structure are frequently restored using fiber posts. In this in vitro study, the apical leakage of self- and dual-activated curing modes for dual-curing resins cementing a translucent fiber post was evaluated using computerized fluid filtration meter and dye extraction method. MATERIAL AND METHODS: One hundred and four extracted human maxillary incisors with single root and canal were used. Experimental samples embedded in a closed system were divided into 4 groups (n=20) according to 2 dual-curing luting systems, with 2 different curing modes (either with self- or light-activation): (1) Panavia F 2.0 with self-cure, (2) Panavia F 2.0 with light-activation, (3) Clearfill SA with self-cure, and (4) Clearfill SA with light activation. Twenty-four teeth served as negative and positive controls. Translucent fiber posts were luted in the roots except in the control groups. RESULTS: Statistical analysis indicated no significant difference in leakage among groups (p>0.05) with 4.12 × 10(-4) (Panavia self-cure), 4.55 × 10(-4) (Clearfill SA self-cure), 5.17 × 10(-4) (Panavia dual-cure), and 5.59 × 10(-4) (Clearfill SA dual-cure) in fluid-filtration method. Absorbance values for dye-extraction method were 266 nanometer (nm) (Panavia self-cure), 268 nm (Clearfill SA self-cure), 270 nm (Panavia dual-cure), and 271 nm (Clearfill SA dual-cure), in which difference among the groups were not statistically significant (p>0.05). When comparing the leakage, assessment methods results showed no statistically significant difference between the tested evaluation techniques (p>0.05). CONCLUSIONS: Light- and self-activation curing modes of Panavia F 2.0 and Clearfill SA perform similar to each other in a closed system.

Evaluation of microleakage of root canal fillings irradiated with different output powers of erbium, chromium:yttrium-scandium-gallium-garnet laser.

This study evaluated the root canal seal achieved by irradiation with an erbium, chromium:yttrium-scandium-gallium-garnet laser, and the optimal output power to remove debris and the smear layer were determined. One hundred mandibular premolar teeth were prepared and divided into four groups. Group 1 was not lased but was irrigated with 5 mL of 5.25% NaOCl and 5 mL of 17% ethylenediaminetetraacetic acid. Group 2 was irradiated at a panel setting of 1 W, group 3 at 2 W and group 4 at 2.5 W, with a 50% water level and 48% air-cooling level. Root canals were obturated by cold lateral compaction, and apical microleakage was measured using a fluid filtration model. The remaining debris and smear layer were evaluated via scanning electron microscopy. Statistically significant differences were detected between groups. Irradiation at 1 and 2 W using an erbium, chromium:yttrium-scandium-gallium-garnet laser produced a seal superior to that of the other treatments.

Patient-specific factors in the proximity of the inferioralveolar nerve to the tooth apex

Objectives: To evaluate whether age and gender differences are predictive factors for inferior alveolar nerve position with respect to mandibular first molar roots. Study Design: Cone-beam computed tomography scans [0.2-mm3 voxel size; n = 200 (100 males, 100 females)] of patients aged 15-65 years showing mandibular first and second molars were included in this study. Patients with pathoses that might affect inferior alveolar nerve position, including second molar and/or first premolar extraction, were excluded. Fourteen measurements (mm) were taken from the inferior alveolar nerve to the mesial and distal root apices. Subjects were grouped by age and gender. Data were analysed using two-way analyses of variance with post hoc Bonferroni corrections.Results: The distance from the inferior alveolar nerve to the root apices was smaller in females than males, regardless of age (p < 0.01). Distal roots were closer to the nerve than mesial roots in both genders (p < 0.05). Total buccolingual mandibular length (at 3-mm apical level) was shorter in females than males (p < 0.01) but mean buccolingual mandibular width at the level of the inferior alveolar canal did not differ. Nerve-root apex distances were significantly shorter in males and females aged 16-25 and 56-65 years than in other age groups (p < 0.01).Conclusions: The distance between inferior alveolar nerve and mandibular first molar roots depends upon the age and gender: it is shorter in females than in males and in subjects aged 16-25 years and >55 years than in other age groups (AU)

No disponible

A comparative evaluation of pain and anxiety levels in 2 different anesthesia techniques: locoregional anesthesia using conventional syringe versus intraosseous anesthesia using a computer-controlled system (Quicksleeper).

OBJECTIVE: The aim of this study was to compare anxiety and pain levels during anesthesia and efficacy of Quicksleeper intraosseous (IO) injection system, which delivers computer-controlled IO anesthesia and conventional inferior alveolar nerve block (IANB) in impacted mandibular third molars. STUDY DESIGN: Forty subjects with bilateral impacted mandibular third molars randomly received IO injection or conventional IANB at 2 successive appointments. The subjects received 1.8 mL 2% articaine. RESULTS: IO injection has many advantages, such as enabling painless anesthesia with less soft tissue numbness and quick onset of anesthesia as well as lingual and palatal anesthesia with single needle penetration. CONCLUSIONS: Although IO injection is a useful technique commonly used during various treatments in dentistry, the duration of injection takes longer than conventional techniques, there is a possibility of obstruction at the needle tip, and, the duration of the anesthetic effect is inadequate for prolonged surgical procedures.

Self-adjusting files in retreatment: a high-resolution micro-computed tomography study.

INTRODUCTION: Rotary instruments that are used for retreatment are very effective, but most of them leave root filling residue in the canal. The aim of this study was to evaluate the efficacy of removing gutta-percha-based root fillings with ProTaper retreatment files (Dentsply Maillefer, Ballaigues, Switzerland) followed by F1 and F2 ProTaper instruments and to compare these results with those obtained with a #25 .06 ProFile instrument (Dentsply Maillefer) followed by the Self- Adjusting File (SAF; ReDent, Ra'anana, Israel) using high resolution micro-computed tomography (CT) scanning. METHODS: Twenty-eight mandibular molar teeth with oval distal root canals were divided into 2 equal groups of 14 teeth each. The distal root canals were instrumented with ProTaper files up to an F2 instrument, the roots were subsequently filled, and the root filling was allowed to set fully. Removal of the root canal filling was performed with D1-D3 ProTaper retreatment files followed by F1 and F2 ProTaper instruments or with a #25 .06 ProFile followed by SAFs. Chloroform was used in both groups to assist in the removal of the root filling material. High-resolution micro-CT scans were used to measure the residual quantities of the root filling material after completion of the procedures. Statistical analysis was performed using the Wilcoxon test and the Student t test. RESULTS: The median root filling residue in the ProTaper group was 5.39% (interquartile range [IQR] = 4.71) of the original volume of the root canal filling. In the ProFile and SAF group, the median residue was 0.41% (IQR = 1.64, P < .001). An arbitrarily selected threshold of less than 0.5% residue was defined as "effectively cleaned," and 57% of the teeth treated with the ProFile and the SAF met this threshold, whereas none of the cases in the ProTaper group did. The ProFile and SAF procedure required less time than the ProTaper protocol. CONCLUSIONS: None of the retreatment methods rendered all of the canals completely free of all root filling residue. Under the conditions of this study, the ProFile and SAF procedure was more effective than the ProTaper procedure and left significantly less root filling residue in the root canal.

Patient-specific factors in the proximity of the inferior alveolar nerve to the tooth apex.

OBJECTIVES: To evaluate whether age and gender differences are predictive factors for inferior alveolar nerve position with respect to mandibular first molar roots. STUDY DESIGN: Cone-beam computed tomography scans [0.2-mm3 voxel size; n = 200 (100 males, 100 females)] of patients aged 15-65 years showing mandibular first and second molars were included in this study. Patients with pathoses that might affect inferior alveolar nerve position, including second molar and/or first premolar extraction, were excluded. Fourteen measurements (mm) were taken from the inferior alveolar nerve to the mesial and distal root apices. Subjects were grouped by age and gender. Data were analysed using two-way analyses of variance with post hoc Bonferroni corrections. RESULTS: The distance from the inferior alveolar nerve to the root apices was smaller in females than males, regardless of age (p < 0.01). Distal roots were closer to the nerve than mesial roots in both genders (p < 0.05). Total buccolingual mandibular length (at 3-mm apical level) was shorter in females than males (p < 0.01) but mean buccolingual mandibular width at the level of the inferior alveolar canal did not differ. Nerve-root apex distances were significantly shorter in males and females aged 16-25 and 56-65 years than in other age groups (p < 0.01). CONCLUSIONS: The distance between inferior alveolar nerve and mandibular first molar roots depends upon the age and gender: it is shorter in females than in males and in subjects aged 16-25 years and >55 years than in other age groups.

Effectiveness of ethylenediaminetetraacetic acid (EDTA) and MTAD on debris and smear layer removal using a self-adjusting file.

OBJECTIVE: The aim of this study was to investigate the cleaning ability of a self-adjusting file (SAF) system regarding debris and smear layer removal using ethylenediaminetetraacetic acid (EDTA) or MTAD. STUDY DESIGN: In total, 45 maxillary incisor teeth were randomly divided into 2 different irrigation groups of 20 canals each and a negative control group of 5 canals. The canals in each of the irrigation groups were irrigated using sodium hypochlorite (1.3%) as an initial irrigant during the first 2 minutes of operation, followed by 2 minutes continuous irrigation with either 17% EDTA or MTAD in a closed system. The negative control group was irrigated using 1.3% sodium hypochlorite. The roots were split longitudinally and subjected to scanning electron microscopy (SEM). The presence of debris and smear layer in the coronal, middle, and apical thirds of the canal was evaluated using a 5-grade scoring system with ×200 and ×2,000 magnification, respectively. RESULTS: The SAF operation with 2-minute continuous irrigation using MTAD resulted in root canal walls that were free of smear layer in 85%, 70%, and 60% and of debris in 95%, 90%, and 95% of the coronal, middle, and apical thirds of the root canals, respectively. The SAF operation with continuous irrigation using EDTA resulted in root canal walls that were free of smear layer in 85%, 60%, and 50% and of debris in 95%, 90%, and 85% of the coronal, middle, and apical thirds of the root canals, respectively. Teeth in the negative control group were totally covered with debris. Evaluation by SEM showed no significant difference between the tested irrigants in removing the smear layer and debris among the different regions of the root canal. Both groups were significantly different from the negative control group. CONCLUSIONS: When using the SAF, the protocols used in this study were effective for debridement for all regions of the root canal even for the apical thirds.

Deformation of the self-adjusting file on simulated curved root canals: a time-dependent study.

OBJECTIVE: This study examined the surface changes of self-adjusting file after operating in different degrees of canal curvatures with a fixed radius of curvature in different operation intervals. STUDY DESIGN: Artificial canals were manufactured in a 5-mm radius of curvature with 45° and 60° angles of curvature. Forty self-adjusting files were divided into 2 groups and submitted to functional fatigue to failure. Twenty files were tested using the 45° angle and the remaining 20 were tested using the 60° angle at 4 minutes for 7 periods in a total of 28 minutes. The average time frame for each 4-minute inspection period was considered as the moment of failure at 2, 6, 10, 14, 18, 22, and 26 minutes, respectively. Instruments were evaluated using scanning electron microscopy to characterize the material under study. RESULTS: The lattice detachment began at the second period for both groups and continued to increase along with the ongoing testing time. The detachment that occurred in 60° canal curvature was higher at the third and fourth periods when compared with the 45° group (P < .05). For both groups, during the third period, detachment of the arch of the lattice was only one sided; however, this deformation was severe between the fourth and sixth periods with a 2-sided detachment, which was easier to separate. The rough surface became smooth after usage. No full separation of the file was evident for both groups. CONCLUSIONS: In multirooted teeth with severely curved root canals, using more than one self-adjusting file might be recommended to prevent lattice detachment.

Evaluation of radicular dentin erosion and smear layer removal capacity of Self-Adjusting File using different concentrations of sodium hypochlorite as an initial irrigant.

OBJECTIVE: The aim of this study was to evaluate Self-Adjusting File (SAF) in the removal of smear layer and impact on the dentin surface using sodium hypochlorite (NaOCl) as an initial irrigation solution at 3 different concentrations combined with 1% EDTA. In addition, the erosive effect of this dual irrigation regime was examined. STUDY DESIGN: Root canal preparations were performed in 30 teeth using the SAF with a continuous irrigation device (Vatea) in a closed system in which the apical foramen was sealed. The vibration mode was on for 5 minutes during the preparation. Three different concentrations of NaOCl (1.3%, 2.6%, and 5.25%) and 1% EDTA were used for continuous irrigation. The final flush was also performed using NaOCl with the vibration mode on. The roots were split longitudinally and subjected to scanning electron microscopy (SEM). The presence of the smear layer was scored using a 5-point scoring system, and the erosive capacity of the irrigants were scored using a 3-point scoring system. RESULTS: The results showed no significant difference in smear layer removal among different concentrations of NaOCl and among the regions. Clean dentin surfaces were observed in 80%, 70%, and 70% with a score of 1 or 2 of the apical thirds using 1.3%, 2.6%, and 5.25% NaOCl, respectively. The 1.3% and 2.6% NaOCl solutions showed similar erosion patterns on the root canal walls (P > .05); however, 5.25% NaOCl caused severe erosion (P < .05). CONCLUSIONS: When using the SAF with continuous irrigation and vibration, lower concentrations of NaOCl and EDTA can be recommended for efficient clinical removal of the smear layer even in the apical thirds and to avoid excessive erosion of root dentin.

Influence of fiber-reinforced composites on the resistance to fracture of vertically fractured and reattached fragments.

INTRODUCTION: The aim of this in vitro study was to evaluate the fracture type and test the effects of 2 different fibers on fracture strength of roots with reattached fragments. The null hypothesis was that adding suitable fibers to the content of dual-cure adhesive resin cement increases the fracture resistance of reattached fragments under vertical forces. METHODS: Root canals of 45 teeth were prepared, and the teeth were intentionally fractured into 2 separate fragments. Control groups (n = 7 each) consisted of unfractured teeth with instrumented and obturated or only instrumented root canals. The fractured teeth were divided into 3 groups (n = 15 each), and separated fragments were reattached by using (1) dual-cured resin cement (Clearfil SA), (2) dual-cured resin cement + polyethylene fiber (Construct), or (3) dual-cured resin cement + glass fiber (Stick-Net). Force was applied at a constant speed of 0.5 mm/min to the root until fracture. Mean load was recorded and analyzed statistically by using Kruskal-Wallis and Dunn tests (P = .05). Fracture types were analyzed by using χ(2) analysis with Yates correction. RESULTS: Stick-Net demonstrated the lowest fracture resistance (P < .05), whereas Construct and Clearfil SA had similar fracture strengths (P > .05). The roots in the control group showed the highest fracture resistance. However, there was no statistically significant difference between the Construct, Clearfil SA, and control groups (P > .05). CONCLUSIONS: Separated fragments of vertically fractured teeth can be reattached by using a dual-cured resin or by adding polyethylene fiber (Construct).

Comparison of root canal transportation induced by three rotary systems with noncutting tips using computed tomography.

OBJECTIVE: The purpose of this study was to compare the shaping ability (apical transportation and straightening) of 3 nickel-titanium rotary instruments (ProTaper Universal, Hero 642 Apical, FlexMaster) with noncutting tips in curved root canals of extracted human teeth using cone beam computed tomography (CBCT). STUDY DESIGN: Sixty mesiobuccal root canals of maxillary molars with curvatures of 25° to 47° were equally divided into 3 groups and embedded in silicone impression material. The root canals were scanned using CBCT (Next Generation i-CAT) and after scanning working length was determined with a hand file to preserve the original curvature. After preparation, teeth were placed into their original positions on the silicone impression material and postinstrumentation scans were performed using the same parameters (4-cm field of view at 0.125-mm voxel). Pre- and postinstrumentation images obtained from root cross-sections located 2, 3, and 4 mm above the apical foramen were compared using Adobe Photoshop software. Transportation was measured by superimposition of final and initial images. Any distance (mm) between prepared and anatomic canal centers was defined as apical transportation. Canal curvatures were measured before and after instrumentation using computed tomography and images were exported to ImageJ software. Differences in the degree and radius of curvature were regarded as straightening. Data were analyzed by ANOVA. RESULTS: Mean transportation values were 0.10 ± 0.03 mm for ProTaper Universal, 0.09 ± 0.03 mm for Hero 642 Apical, and 0.07 ± 0.02 mm for FlexMaster, and the differences were not significant. Mean values for straightening among the groups were not significantly different (P > .05). The performances of all instruments were similar. CONCLUSION: Apical transportation occurred with all the instruments despite their noncutting tips.