Copper-Loaded Layered Bismuth Subcarbonate-Efficient Multifunctional Heterogeneous Catalyst for Concerted C-S/C-N Heterocyclization.

An efficient self-supported Cu(II)Bi(III) bimetallic catalyst with a layered structure was designed and developed. By careful characterization of the as-prepared material, the host structure was identified to exhibit a Sillen-type bismutite framework, with copper(II) ions being loaded as guests. The heterogeneous catalyst enabled C-N and C-S arylations under mild reaction conditions and with high chemoselectivities, thus furnishing valuable phenothiazines via heterocyclization with wide substrate tolerance. As corroborated by detailed catalytic studies, the cooperative, bifunctional catalyst, bearing Lewis acid sites along with copper(II) catalytic sites, facilitated an intriguing concerted C-N/C-S heterocyclization mechanism. The heterogeneous nature of the catalytic reactions was verified experimentally. Importantly, the catalyst was successfully recycled and reused multiple times, persevering its original structural order as well as its initial activity.

Oxidation of Cysteinate Anions Immobilized in the Interlamellar Space of CaAl-Layered Double Hydroxide.

L-Cysteinate-intercalated CaAl-layered double hydroxide (LDH) was prepared by the co-precipitation method producing highly crystalline hydrocalumite phase with a well-pillared interlayer gallery. The obtained materials were characterized by X-ray diffractometry, IR as well as Raman spectroscopies. By performing interlamellar oxidation reactions with peracetic acid as oxidant, oxidation of cysteinate to cystinate in aqueous and cysteinate sulfenic acid in acetonic suspensions occurred. The oxidations could be performed under mild conditions, at room temperature, under neutral pH and in air. It has been shown that the transformation pathways are due to the presence of the layered structure, that is, the confined space of the LDH behaved as molecular reactor.

Catalytic antioxidant nanocomposites based on sequential adsorption of redox active metal complexes and polyelectrolytes on nanoclay particles.

An antioxidant nanocomposite was prepared by successive adsorption of redox active metal complexes (copper(ii)-bipyridyl and iron(iii)-citrate) and polyelectrolytes (poly(styrene sulfonate) and poly(diallyldimethyl ammonium)) on layered double hydroxide nanoclay. The experimental conditions were optimized in each preparation step and thus, the final composite formed highly stable colloids, i.e., excellent resistance against salt-induced aggregation was achieved. Due to the synergistic effect of the metal complexes, the developed composite showed remarkable activity in the dismutation of superoxide radicals, close to the one determined for the native superoxide dismutase enzyme. The obtained composite is highly selective for superoxide radical dismutation, while its activity in other antioxidant tests was close to negligible. Structural characterization of the composite revealed that the excellent superoxide radical scavenging ability originated from the advantageous coordination geometry around the copper(ii) center formed upon immobilization. The structure formed around the metal centers led to optimal redox features and consequently, to an improved superoxide dismutase-like activity. The catalytic antioxidant composite is a promising candidate to reduce oxidative stress in industrial manufacturing processes, where natural enzymes quickly lose their activity due to the harsh environmental conditions.

A colloid chemistry route for the preparation of hierarchically ordered mesoporous layered double hydroxides using surfactants as sacrificial templates.

An efficient synthetic route was developed to prepare hierarchically ordered mesoporous layered double hydroxide (LDH) materials. Sodium dodecyl sulfate (SDS) was used as a sacrificial template to tune the interfacial properties of the LDH materials during the synthetic process. The SDS dose was optimized to obtain stable dispersions of the SDS-LDH composites, which were calcined, then rehydrated to prepare the desired LDH structures. Results of various characterization studies revealed a clear relationship between the colloidal stability of the SDS-LDH precursors and the structural features of the final materials, which was entirely SDS-free. A comparison to the reference LDH prepared by the traditional co-precipitation-calcination-rehydration method in the absence of SDS shed light on a remarkable increase in the specific surface area (one of the highest within the previously reported LDH materials) and pore volume as well as on the formation of a beneficial pore size distribution. As a proof of concept, the mesoporous LDH was applied as adsorbent for removal of nitrate and dichromate anions from aqueous samples, and excellent efficiency was observed in both sorption capacity and recyclability. These results make the obtained LDH a promising candidate as adsorbent in various industrial and environmental processes, wherever the use of mesoporous and organic content-free materials is required.

Differential Precipitation of Mg(OH)2 from CaSO4·2H2O Using Citrate as Inhibitor-A Promising Concept for Reagent Recovery from MgSO4 Waste Streams.

In hydrometallurgical processing and acidic wastewater treatment, one of the neutralizing agents employed is MgO or Mg(OH)2. At the end of this process, the resulting solution, which is rich in SO42- and Mg2+ is treated with lime to remove (or minimize the amount) of these ions via the precipitation of Mg(OH)2 and CaSO4·2H2O (gypsum). In our work, an attempt was made to separate the two solids by increasing the induction time of the gypsum precipitation, thus regenerating relatively pure Mg(OH)2 which could be reused in wastewater treatments or hydrometallurgical processing circuits, and in this way, significantly enhancing the economic viability of the process. During our experiments, the reaction of an MgSO4 solution with milk of lime prepared from quicklime was studied. The effects of a range of organic additives, which can slow down the precipitation of gypsum have been assessed. The process was optimized for the most promising inhibiting agent-that is, the citrate ion. The reactions were continuously monitored in situ by conductometric measurements with parallel monitoring of solution pH and temperature. ICP-OES measurements were also carried out on samples taken from the reaction slurry. The composition of the precipitating solids at different reaction times was established by powder XRD and their morphology by SEM. Finally, experiments were carried out to locate the additive after the completion of the precipitation reaction to get information about its potential reuse.

Equilibria and Dynamics of Sodium Citrate Aqueous Solutions: The Hydration of Citrate and Formation of the Na3Cit0 Ion Aggregate.

Sodium citrate (Na3Cit) has a crucial role in many biological and industrial processes. Yet, quantitative information on its hydration and the ion association between Na+ and Cit3- ions in a broad range of salt concentrations is still lacking. In this work, we study both ion association equilibria and relaxation dynamics of sodium citrate solutions by combining potentiometry, spectrophotometry, and dielectric spectroscopy. From photometric and potentiometric measurements, we detect the formation of the NaCit2- ion-pair and the neutral Na3Cit0 ion aggregate in a wide range of ionic strengths (0.5-4 M). Due to its remarkable stability, the latter becomes the prevailing species at higher salt concentrations. In the dielectric spectra, we observe the dipolar relaxation of Cit3- and NaCit2- and two solvent-related processes, associated with the collective rearrangement of the H-bond network (cooperative water mode) and the H-bond flip of water molecules (fast water mode). Unlike numerous other salt solutions, the relaxation time of the cooperative mode scales with the viscosity indicating that the strongly hydrated anion fits well into the water network. That is, the stabilizing effect of anion-solvent interactions on the H-bond network outweighs the destructive impact of the cations as the latter are only present at low concentration, due to strong ion association. In conclusion, the affinity of citrate toward Na+ binding not only governs solution equilibria but also has a strong impact on water dynamics.

The Structure and Thermal Properties of Solid Ternary Compounds Forming with Ca2+, Al3+ and Heptagluconate Ions.

In the present work, the structure and thermal stability of Ca-Al mixed-metal compounds, relevant in the Bayer process as intermediates, have been investigated. X-ray diffraction (XRD) measurements revealed the amorphous morphology of the compounds, which was corroborated by SEM-EDX measurements. The results of ICP-OES and UV-Vis experiments suggested the formation of three possible ternary calcium aluminum heptagluconate (Ca-Al-Hpgl) compounds, with the formulae of CaAlHpgl(OH)40, Ca2AlHpgl2(OH)50 and Ca3Al2Hpgl3(OH)90. Additional IR and Raman experiments revealed the centrally symmetric arrangement of heptagluconate around the metal ion. The increased thermal stability was demonstrated by thermal analysis of the solids and confirmed our findings.

Ultrasound-Assisted Hydrazine Reduction Method for the Preparation of Nickel Nanoparticles, Physicochemical Characterization and Catalytic Application in Suzuki-Miyaura Cross-Coupling Reaction.

In the experimental work leading to this contribution, the parameters of the ultrasound treatment (temperature, output power, emission periodicity) were varied to learn about the effects of the sonication on the crystallization of Ni nanoparticles during the hydrazine reduction technique. The solids were studied in detail by X-ray diffractometry, dynamic light scattering, thermogravimetry, specific surface area, pore size analysis, temperature-programmed CO2/NH3 desorption and scanning electron microscopy. It was found that the thermal behaviour, specific surface area, total pore volume and the acid-base character of the solids were mainly determined by the amount of the nickel hydroxide residues. The highest total acidity was recorded over the solid under low-power (30 W) continuous ultrasonic treatment. The catalytic behaviour of the nanoparticles was tested in a Suzuki-Miyaura cross-coupling reaction over five samples prepared in the conventional as well as the ultrasonic ways. The ultrasonically prepared catalysts usually performed better, and the highest catalytic activity was measured over the nanoparticles prepared under low-power (30 W) continuous sonication.

Magnesium(II) d-Gluconate Complexes Relevant to Radioactive Waste Disposals: Metal-Ion-Induced Ligand Deprotonation or Ligand-Promoted Metal-Ion Hydrolysis?

The complexation equilibria between Mg2+ and d-gluconate (Gluc-) ions are of particular importance in modeling the chemical speciation in low- and intermediate-level radioactive waste repositories. NMR measurements and potentiometric titrations conducted at 25 °C and 4 M ionic strength revealed the formation of the MgGluc+, MgGlucOH0, MgGluc(OH)2-, and Mg3Gluc2(OH)40 complexes. The trinuclear species provides indirect evidence for the existence of multinuclear magnesium(II) hydroxido complexes, whose formation was proposed earlier but has not been confirmed yet. Additionally, speciation calculations demonstrated that MgCl2 can markedly decrease the solubility of thorium(IV) at low ligand concentrations. Regarding the structure of MgGluc+, both IR spectra and density functional theory (DFT) calculations indicate the monodentate coordination of Gluc-. By the potentiometric data, the acidity of the water molecules is higher in the MgGluc+ and MgGlucOH0 species than in the Mg(H2O)62+ aqua ion. On the basis of DFT calculations, this ligand-promoted hydrolysis is caused by strong hydrogen bonds forming between Gluc- and Mg(H2O)62+. Conversely, metal-ion-induced ligand deprotonation takes place in the case of calcium(II) complexes, giving rise to salient variations on the NMR spectra in a strongly alkaline medium.

Effects of ultrasonic irradiation on the synthesis, crystallization, thermal and dissolution behaviour of chloride-intercalated, co-precipitated CaFe-layered double hydroxide.

The output power (30-150 W) and the periodicity (20-100%) of ultrasound emission were varied in a wide range to regulate and improve the crystallization process in the commonly used co-precipitation technique of chloride-intercalated CaFe-layered double hydroxides. The influence of ultrasound irradiation on the as-prepared materials was studied by X-ray diffractometry, dynamic light scattering, UV-Vis-NIR diffuse reflectance spectroscopy, specific surface area measurement, pore size analysis, ion-selective electrode potentiometric investigations and thermogravimetry. Additionally, structural alterations due to heat treatment at various temperatures were followed in detail by Fourier-transform infrared and X-ray absorption spectroscopies as well as scanning electron microscopy. The ultrasonic treatment was capable of controlling the sizes of primarily formed (from 19 nm to 30 nm) as well as the aggregated (secondary) particles (between 450 nm and 700 nm), and thus modifying their textural parameters and enhancing the incorporation of chloride anions into the interlamellar space. For the first time, the optical energy gap of CaFe-LDH was reported here depending on the nature of applied stirring (4.18-4.34 eV). The heat-treatment investigations revealed that the layered structure was stabile until 200 °C, even at the atomic level.

Ball Milling of Copper Powder Under Dry and Surfactant-Assisted Conditions-On the Way Towards Cu/Cu2O Nanocatalyst.

Samples of copper powder was milled with varied grinding frequencies in the presence of various organic agents (oleylamine, ethylene glycol or dimethyl sulfoxide) or without additives. The effects of experimental conditions were investigated by X-ray diffractometry, scanning electron microscopy and dynamic light scattering measurements. The aggregation of particles were supressed by added organics. The catalytic activities of the variously treated samples were measured in the Ullmanntype reaction of iodobenzene and 1H-pyrazole.

The Synthesis and Use of Nano Nickel Catalysts.

The hydrazine reduction method was applied for the synthesis of nickel nanoparticles without using inert atmosphere and added surface active agents. The effect of the preparation temperature and the chemical quality of the metal sources as well as the solvents were studied. The generation of nanoparticles were studied primarily by X-ray diffractometry, but scanning and transmission electron microscopies as well as dynamic light scattering measurements were also used for the better understanding of the nanoparticles behaviour. The elevation of temperature was the key point in transforming Ni(OH)2 into metallic nickel. By selecting the metal source, the obtained crystallite sizes could be tailored between 7 nm and 15 nm; however, the SEM and DLS measurements revealed significant agglomeration resulting in aggregates with spherical or Ni(OH)2 resembling morphologies depending on the solvent used. The catalytic activities of the nanoparticles prepared were tested and compared in a Suzuki-Miyaura cross-coupling reaction.

Effect of Polyelectrolyte Mono- and Bilayer Formation on the Colloidal Stability of Layered Double Hydroxide Nanoparticles.

Sequential adsorption of polyelectrolytes on nanoparticles is a popular method to obtain thin films after deposition. However, the effect of polyelectrolyte multilayer formation on the colloidal stability of the nanoparticles has not been studied in detail. In the present work, layered double hydroxides (LDH) were synthesized and interaction with oppositely and like-charged polyelectrolytes was investigated. Electrophoretic and light scattering measurements revealed that colloidal stability of LDH can be tuned by adsorption of poly(styrene sulfonate) (PSS) on the oppositely charged LDH surface in appropriate doses and thus, unstable or stable dispersions can be designed. Negatively charged LDH of adsorbed PSS monolayer was obtained and a poly(diallyldimethyl ammonium chloride) (PDADMAC) second layer was systematically built on the particles. The obtained polyelectrolyte bilayer provided high colloidal stability for the LDH-PSS-PDADMAC dispersions due to the presence of repulsive interparticle forces of electrostatic and steric origin. The results provide crucial quantitative information on designing highly stable particle-polyelectrolyte systems for the preparation of thin films or immobilization of guest substances between the layers for delivery processes.

The acidity and self-catalyzed lactonization of l-gulonic acid: Thermodynamic, kinetic and computational study.

Lactonization and proton dissociation of sugar acids take place simultaneously in acidic aqueous solutions. The protonation-deprotonation processes are always fast, whilst the formation and hydrolysis of γ- and δ-lactones are usually slower. Thus, both thermodynamic and kinetic information are required for the complete understanding of these reactions. The protonation constant (Kp) of l-gulonate (Gul-) was determined from potentiometric and polarimetric measurements, while the individual lactonization constants (KL,γ and KL,δ) for l-gulonic acid (HGul) were obtained via13C NMR experiments. The applicability of this method was proven by measuring these well-known constants for d-gluconic acid (HGluc) and by comparing them to literature data. l-gulonic acid γ-lactone (γ-HGul) has remarkable stability in contrast with δ-HGul as well as γ- and δ-HGluc. The polarimetric measurement implies that the main factor responsible for the enhanced stability of γ-HGul is that its hydrolysis is much slower than that of δ-HGul. This higher stability of the γ-HGul ring over its δ-isomer was also confirmed by quantum chemical calculations. A new confirmed feature of the reaction is that in parallel to H3O+, HGul also catalyzes the formation and reverse hydrolytic processes of γ-HGul, similarly to other general acid catalysts.

Configuration-dependent complex formation between Ca(II) and sugar carboxylate ligands in alkaline medium: Comparison of L-gulonate with D-gluconate and D-heptaguconate.

The calcium sugar carboxylate interactions in hyperalkaline solutions are of relevance in radioactive waste repositories and in certain industrial processes. The complex formation between L-gulonate and Ca2+ ions was studied in strongly alkaline medium at 25 °C and 1 M ionic strength and was compared with previous results reported for D-gluconate and D-heptagluconate. The deprotonation of the ligand was confirmed by potentiometric and 13C NMR spectroscopic measurements. Pronounced pH effects were seen in the presence of Ca2+ indicating strong complex formation. By the evaluation of the experimental data, two highly stable trinuclear species, Ca3Gul2H-3+ and the Ca3Gul2H-40, are formed in alkaline aqueous solutions. Polarimetric as well as 1H NMR spectroscopic measurements attested that the increased complex stability was due to the formation of strong metal ion - alcoholate interactions. Moreover, the 1H NMR spectra of the three anions refer to the role of configuration in metal ion-binding. That is, the participation of the C3-OH or C4-OH group is governed by the relative position (i.e., threo or erythro) of the C2-OH and C3-OH groups.

Ultrasonically-enhanced preparation, characterization of CaFe-layered double hydroxides with various interlayer halide, azide and oxo anions (CO32-, NO3-, ClO4-).

An ultrasonically-enhanced mechanochemical method was developed to synthesize CaFe-layered double hydroxides (LDHs) with various interlayer anions (CO32-, NO3-, ClO4-, N3-, F-, Cl-, Br- and I-). The duration of pre-milling and ultrasonic irradiation and the variation of synthesis temperature in the wet chemical step were investigated to obtain the optimal parameters of preparation. The main method to characterize the products was X-ray diffractometry, but infrared and synchrotron-based X-ray absorption spectroscopies as well as thermogravimetric measurements were also used to learn about fine structural details. The synthesis method afforded successful intercalation of the anions, among others the azide anion, a rarely used counter ion providing a system, which enables safe handling the otherwise highly reactive anion. The X-ray absorption spectroscopic measurements revealed that the quality of the interlayered anions could modulate the spatial arrangement of the calcium ions around the iron(III) ions, but only in the second coordination sphere.

Formation of mono- and binuclear neodymium(iii)-gluconate complexes in aqueous solutions in the pH range of 2-8.

The complex formation between Nd(iii) and d-gluconate (Gluc-) is of relevance in modelling the chemical equilibria of radioactive waste repositories. In the present work, the formation of NdpGlucqH-r complexes at 25 °C and pH = 2-8 was studied via spectrophotometry, potentiometry, freezing point depression, conductometry and NMR spectroscopy. In addition to the four mononuclear complexes (pq-r = 110, 120, 130 and 11-2), the formation of two binuclear, so far unknown complexes (pq-r = 23-2 and 24-2) was revealed. Between pH = 5.5 and 7, with the increasing metal ion and ligand concentrations, the Nd2Gluc3H-2+ species becomes progressively predominant. Under the conditions characteristic of waste repositories, however, the formation of these complexes can be neglected. Regarding the binding sites of Gluc-, C2-OH and C3-OH groups, in addition to the carboxylate ion, were identified from 1H and 13C spectroscopic measurements. Above pH = 6, the metal-ligand interactions became stronger implying the formation of deprotonated complexes involving the C2-OH group, while the displacement of the second proton at the C3-OH is also possible. The metal ion induced deprotonation of the ligand was confirmed by DFT calculations.

ML and ML2 complex formation between Ca(ii) and d-glucose derivatives in aqueous solutions.

The complex formation equilibria between Ca2+ ions and six carbohydrate derivatives related to d-glucose was quantitatively characterized by potentiometry, freezing point depression and polarimetry. Complexation could not be observed for d-glucose, while weak association was deduced for d-sorbitol and d-mannitol. Stronger complexes are formed with d-gluconate and d-heptagluconate due to the presence of the carboxylate group. In addition to the plausible 1 : 1 species, the 1 : 2 species can also be detected at higher ligand to metal ratios. The ML type complex is also formed with d-glucuronate and d-glucarate. The strong association for d-gluconate and d-heptagluconate was attested by freezing point depression measurements. Polarimetric results show that for these two ligands the specific rotation of the complexed and free anions is only slightly different. The stability of the 1 : 1 complexes follows the order: mannitol < sorbitol < glucuronate < heptagluconate ≈ gluconate < glucarate. The formation of the ML2 type species has been established for polyhydroxy ligands having at least one carboxylate group in addition to the conformational flexibility.

Calcium complexation and acid-base properties of l-gulonate, a diastereomer of d-gluconate.

The Ca(ii)-complexation and acid-base properties of l-gulonic acid (HGul), a diastereomer of d-gluconic acid (HGluc) differing only in the configurations of C2 and C5 have been investigated via1H and 13C NMR spectroscopies, Ca-ISE- and pH-potentiometry, polarimetry and freezing point depression. Data obtained for Gul-/HGul have been compared with those of Gluc-/HGluc. It was found that some properties (acid dissociation constant, the stoichiometry and formation constants of the Ca(ii)-complexes) were insensitive to the difference in the configuration. In solutions with pH close to neutral, the presence of the complexes CaGul+ and CaGul20 was unambiguously proven, with formation constants of log K1,1 = 0.88 ± 0.02 and log ß1,2 = 1.51 ± 0.03 (I = 1 M, T = 25 °C). The formation of Ca(Gluc)20 was also observed by others, which implies that the formation of the charge neutral 1 : 2 Ca(ii)-complex of sugar carboxylates is more common than was previously believed. The stability of these species was found not to vary significantly in the ionic strength range of 1-4 M. Polarimetric measurements attested that the structure of Gul- did not change markedly upon complexation. NMR experiments suggest the coordination of C2-OH and C3-OH groups (beside COO-). DFT calculations support the existence of two coordination isomers, in which Ca2+ is attached to the COO-, C2-OH and C3-OH (in agreement with NMR), as well as to the COO-, C3-OH and C4-OH groups.

Calcium l-tartrate complex formation in neutral and in hyperalkaline aqueous solutions.

The complex formation reaction between the l-tartrate (Tar2-) and calcium ions taking place in neutral and in hyperalkaline (pH > 13) aqueous solutions has been investigated. It was demonstrated that upon NaOH addition the solubility of the CaTar(s) precipitate significantly increases. Conductometric and freezing point depression measurements further confirmed that in this process water soluble species are formed as a result of a reaction between the CaTar(s) and the hydroxide ion (or, conversely, between Ca(OH)2(s) and the Tar2- ion). 13C NMR spectroscopic measurements yielded the value of pK3 = 15.4 ± 0.2 for the proton dissociation of one of the alcoholic OH groups of Tar2- (at 25.0 °C and 4 M Na(Cl) ionic strength). Upon addition of calcium ions to an alkaline Tar2- solution, the 1H NMR signal gradually broadened and the 13C-satellite peaks split to two components, which also indicate complexation. From H2/Pt potentiometric titrations performed with solutions in the 13.6 ≤ pH ≤ 14.4 range, it was observed, that this complex formation is accompanied by a hydroxide ion consuming process. The titration curves can be best described via assuming the formation of the CaTarH-1-(aq) (lg ß11-1 = -11.2 ± 0.1) and CaTarH-22-(aq) (lg ß11-2 = -25.3 ± 0.1) complexes. In hyperalkaline solutions, these two species account for more than 90-99% of the calcium ions present and the contribution of the other reasonable and well-established calcium-containing solution species is rather small. The possible structures of the above complexes have been modeled via ab initio calculations. The stoichiometries are consistent both with species containing coordinated alcoholate group(s) and with mixed Ca(ii)-hydroxo-tartrato complexes. From the data available at present, both types of structures can be considered as chemically reasonable.