Reaction of a Molybdenum Bis(dinitrogen) Complex with Carbon Dioxide: A Combined Experimental and Computational Investigation.

Refluxing Mo(CO)6 in the presence of the phosphine-functionalized α-diimine ligand Ph2PPrDI allowed for substitution and formation of the dicarbonyl complex, (Ph2PPrDI)Mo(CO)2. Oxidation with I2 followed by heating resulted in further CO dissociation and isolation of the corresponding diiodide complex, (Ph2PPrDI)MoI2. Reduction of this complex under a N2 atmosphere afforded the corresponding bis(dinitrogen) complex, (Ph2PPrDI)Mo(N2)2. The solid-state structures of all three compounds were found to feature a tetradentate chelate and cis-monodentate ligands. Notably, the addition of CO2 to (Ph2PPrDI)Mo(N2)2 is proposed to result in head-to-tail CO2 coupling to generate the corresponding metallacycle and ultimately a mixture of (Ph2PPrDI)Mo(CO)2 and the bis(oxo) dimer, [(κ3-Ph2PPrDI)Mo(O)(µ-O)]2. Computational studies have been performed to gain insight into the reaction and evaluate the importance of cis-coordination sites for selective head-to-tail CO2 reductive coupling, CO deinsertion, disproportionation, and stepwise CO2 deinsertion.

Efficient Cobalt Catalyst for Ambient-Temperature Nitrile Dihydroboration, the Elucidation of a Chelate-Assisted Borylation Mechanism, and a New Synthetic Route to Amides.

N,N-Diborylamines have emerged as promising reagents in organic synthesis; however, their efficient preparation and full synthetic utility have yet to be realized. To address both shortcomings, an effective catalyst for nitrile dihydroboration was sought. Heating CoCl2 in the presence of PyEtPDI afforded the six-coordinate Co(II) salt, [(PyEtPDI)CoCl][Cl]. Upon adding 2 equiv of NaEt3BH, hydride transfer to one chelate imine functionality was observed, resulting in the formation of (κ4-N,N,N,N-PyEtIPCHMeNEtPy)Co. Single-crystal X-ray diffraction and density functional theory calculations revealed that this compound possesses a low-spin Co(II) ground state featuring antiferromagnetic coupling to a singly reduced imino(pyridine) moiety. Importantly, (κ4-N,N,N,N-PyEtIPCHMeNEtPy)Co was found to catalyze the dihydroboration of nitriles using HBPin with turnover frequencies of up to 380 h-1 at ambient temperature. Stoichiometric addition experiments revealed that HBPin adds across the Co-Namide bond to generate a hydride intermediate that can react with additional HBPin or nitriles. Computational evaluation of the reaction coordinate revealed that the B-H addition and nitrile insertion steps occur on the antiferromagnetically coupled triplet spin manifold. Interestingly, formation of the borylimine intermediate was found to occur following BPin transfer from the borylated chelate arm to regenerate (κ4-N,N,N,N-PyEtIPCHMeNEtPy)Co. Borylimine reduction is in turn facile and follows the same ligand-assisted borylation pathway. The independent hydroboration of alkyl and aryl imines was also demonstrated at 25 °C. With a series of N,N-diborylamines in hand, their addition to carboxylic acids allowed for the direct synthesis of amides at 120 °C, without the need for an exogenous coupling reagent.

Hydrogen production from water using a bis(imino)pyridine molybdenum electrocatalyst.

In 5.0 M H2O/acetonitrile, [((Ph2PPr)PDI)MoO][PF6]2 produces H2 with 96% Faradaic efficiency at -2.5 V vs. Fc(+/0) and a rate of 55 s(-1). Reactivity studies and isolation of a Mo(ii) oxo intermediate, ((Ph2PPr)PDI)MoO, shed light on the H2 evolution mechanism.

Isolation of a bis(imino)pyridine molybdenum(i) iodide complex through controlled reduction and interconversion of its reaction products.

Analysis of previously reported [((Ph2PPr)PDI)MoI][I] by cyclic voltammetry revealed a reversible wave at -1.20 V vs. Fc(+/0), corresponding to the Mo(ii)/Mo(i) redox couple. Reduction of [((Ph2PPr)PDI)MoI][I] using stoichiometric K/naphthalene resulted in ligand deprotonation rather than reduction to yield a Mo(ii) monoiodide complex featuring a Mo-C bond to the α-position of one imine substituent, (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoI. Successful isolation of the inner-sphere Mo(i) monoiodide complex, ((Ph2PPr)PDI)MoI, was achieved via reduction of [((Ph2PPr)PDI)MoI][I] with equimolar Na/naphthalene. This complex was found to have a near octahedral coordination geometry by single crystal X-ray diffraction and electron paramagnetic resonance (EPR) spectroscopy revealed an unpaired Mo-based electron which is highly delocalized onto the PDI chelate core. Attempts to prepare a Mo(i) monohydride complex upon adding NaEt3BH to ((Ph2PPr)PDI)MoI resulted in disproportionation to yield an equimolar quantity of (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH and newly identified ((Ph2PPr)PDI)MoH2. Independent preparation of ((Ph2PPr)PDI)MoH2 was achieved by adding 2 equiv. NaEt3BH to [((Ph2PPr)PDI)MoI][I] and a minimum hydride resonance T1 of 176 ms suggests that the Mo-bound H atoms are best described as classical hydrides. Interestingly, ((Ph2PPr)PDI)MoH2 can be converted to (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoI upon iodomethane addition, while ((Ph2PPr)PDI)MoH2 is prepared from (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoI in the presence of excess NaEt3BH. Similarly, (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoI can be converted to (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH with 1 equiv. of NaEt3BH, while the opposite transformation occurs following iodomethane addition to (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH. Facile interconversion between [((Ph2PPr)PDI)MoI][I], (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoI, (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH, and ((Ph2PPr)PDI)MoH2 is expected to guide future reactivity studies on this unique set of compounds.

Conversion of Carbon Dioxide to Methanol Using a C-H Activated Bis(imino)pyridine Molybdenum Hydroboration Catalyst.

Using a multistep synthetic pathway, a bis(imino)pyridine (or pyridine diimine, PDI) molybdenum catalyst for the selective conversion of carbon dioxide into methanol has been developed. Starting from ((Ph2PPr)PDI)Mo(CO), I2 addition afforded [((Ph2PPr)PDI)MoI(CO)][I], which features a seven-coordinate Mo(II) center. Heating this complex to 100 °C under vacuum resulted in CO loss and the formation of [((Ph2PPr)PDI)MoI][I]. Reduction of [((Ph2PPr)PDI)MoI][I] in the presence of excess K/Hg yielded (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH following methylene group C-H activation at the α-position of one PDI imine substituent. The addition of CO2 to (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH resulted in facile insertion to generate the respective η(1)-formate complex, (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)Mo(OCOH). When low pressures of CO2 were added to solutions of (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH containing pinacolborane, the selective formation of H3COBPin and O(BPin)2 was observed along with precatalyst regeneration. When HBPin was limited, H2C(OBPin)2 was observed as an intermediate and (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)Mo(OCOH) remained present throughout CO2 reduction. The hydroboration of CO2 to H3COBPin was optimized and 97% HBPin utilization by 0.1 mol % (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH was demonstrated over 8 h at 90 °C, resulting in a methoxide formation turnover frequency (TOF) of 40.4 h(-1) (B-H utilization TOF = 121.2 h(-1)). Hydrolysis of the products and distillation at 65 °C allowed for MeOH isolation. The mechanism of (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH mediated CO2 hydroboration is presented in the context of these experimental observations. Notably, (κ(6)-P,N,N,N,C,P-(Ph2PPr)PDI)MoH is the first Mo hydroboration catalyst capable of converting CO2 to MeOH, and the importance of this study as it relates to previously described catalysts is discussed.

Preparation and hydrosilylation activity of a molybdenum carbonyl complex that features a pentadentate bis(imino)pyridine ligand.

Attempts to prepare low-valent molybdenum complexes that feature a pentadentate 2,6-bis(imino)pyridine (or pyridine diimine, PDI) chelate allowed for the isolation of two different products. Refluxing Mo(CO)6 with the pyridine-substituted PDI ligand, (PyEt)PDI, resulted in carbonyl ligand substitution and formation of the respective bis(ligand) compound ((PyEt)PDI)2Mo (1). This complex was investigated by single-crystal X-ray diffraction, and density functional theory calculations indicated that 1 possesses a Mo(0) center that back-bonds into the π*-orbitals of the unreduced PDI ligands. Heating an equimolar solution of Mo(CO)6 and the phosphine-substituted PDI ligand, (Ph2PPr)PDI, to 120 °C allowed for the preparation of ((Ph2PPr)PDI)Mo(CO) (2), which is supported by a κ(5)-N,N,N,P,P-(Ph2PPr)PDI chelate. Notably, 1 and 2 have been found to catalyze the hydrosilylation of benzaldehyde at 90 °C, and the optimization of 2-catalyzed aldehyde hydrosilylation at this temperature afforded turnover frequencies of up to 330 h(-1). Considering additional experimental observations, the potential mechanism of 2-mediated carbonyl hydrosilylation is discussed.