ABSTRACT
Bovine mastitis (BM) represents a significant challenge in the dairy industry. Limitations of conventional treatments have prompted the exploration of alternative approaches, such as photodynamic inactivation (PDI). In this study, we developed a PDI protocol to eliminate BM-associated pathogens using porphyrin-doped conjugated polymer nanoparticles (CPN). The PDI-CPN protocol was evaluated in four mastitis isolates of Staphylococcus and in a hyper-biofilm-forming reference strain. The results in planktonic cultures demonstrated that PDI-CPN exhibited a bactericidal profile upon relatively low light doses (â¼9.6 J/cm2). Furthermore, following a seven-hour incubation period, no evidence of cellular reactivation was observed, indicating a highly efficient post-photodynamic inactivation effect. The successful elimination of bacterial suspensions encouraged us to test the PDI-CPN protocol on mature biofilms. Treatment using moderate light dose (â¼64.8 J/cm2) reduced biofilm biomass and metabolic activity by up to 74% and 88%, respectively. The impact of PDI-CPN therapy on biofilms was investigated using scanning electron microscopy (SEM), which revealed nearly complete removal of the extracellular matrix and cocci. Moreover, ex vivo studies conducted on bovine udder skin demonstrated the efficacy of the therapy in eliminating bacteria from these scaffolds and its potential as a prophylactic method. Notably, the histological analysis of skin revealed no signs of cellular degeneration, suggesting that the protocol is safe and effective for BM treatment. Overall, this study demonstrates the potential of PDI-CPN in treating and preventing BM pathogens. It also provides insights into the effects of PDI-CPN on bacterial growth, metabolism, and survival over extended periods, aiding the development of effective control strategies and the optimization of future treatments.
Subject(s)
Biofilms , Light , Mastitis, Bovine , Nanoparticles , Polymers , Animals , Cattle , Nanoparticles/chemistry , Mastitis, Bovine/microbiology , Mastitis, Bovine/drug therapy , Biofilms/drug effects , Biofilms/radiation effects , Female , Polymers/chemistry , Polymers/pharmacology , Photosensitizing Agents/pharmacology , Photosensitizing Agents/chemistry , Porphyrins/chemistry , Porphyrins/pharmacology , Staphylococcus/drug effects , Staphylococcus/radiation effects , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Microscopy, Electron, Scanning , PhotochemotherapyABSTRACT
In recent years significant efforts have been made to develop new materials for wound dressing with improved healing properties. However, the synthesis methods usually employed to this end are often complex or require several steps. We describe here the synthesis and characterization of antimicrobial reusable dermatological wound dressings based on N-isopropylacrylamide co-polymerized with [2-(Methacryloyloxy) ethyl] trimethylammonium chloride hydrogels (NIPAM-co-METAC). The dressings were obtained with a very efficient single-step synthesis procedure based on visible light (455 nm) by photopolymerization. To this end, F8BT nanoparticles of the conjugated polymer (poly(9,9-dioctylfluorene-alt-benzothiadiazole) - F8BT) were used as macro-photoinitiators, and a modified silsesquioxane was employed as crosslinker. Dressings obtained by this simple and gentle method show antimicrobial and wound healing properties, without the incorporation of antibiotics or any other additives. The physical and mechanical properties of these hydrogel-based dressings were evaluated, as well as their microbiological properties, through in vitro experiments. Results show that dressings with a molar ratio of METAC of 0.5 or higher exhibit high swelling capacity, appropriate water vapor transmission rate values, stability and thermal response, high ductility and adhesiveness. In addition, biological tests showed that the dressings have significant antimicrobial capacity. The best inactivation performance was found for hydrogels synthesized with the highest METAC content. The dressings were tested several times with fresh bacterial cultures, showing a bacterial kill efficiency of 99.99 % even after three repetitions in a row, employing the same dressing, demonstrating the intrinsic bactericidal property of the materials and their reusability. In addition, the gels show low hemolytic effect, high dermal biocompatibility and noticeable wound healing effects. Overall results demonstrate that some specific hydrogel formulations have potential application as dermatological dressings for wound healing and disinfection.
Subject(s)
Anti-Bacterial Agents , Anti-Infective Agents , Anti-Bacterial Agents/pharmacology , Anti-Infective Agents/pharmacology , Wound Healing , Bandages , Hydrogels/pharmacologyABSTRACT
Each year a rising number of infections can not be successfully treated owing to the increasing pandemic of antibiotic resistant pathogens. The global shortage of innovative antibiotics fuels the emergence and spread of drug resistant microbes. Basic research, development, and applications of alternative therapies are urgently needed. Since the 90´s, light-mediated therapies have promised to be the next frontier combating multidrug-resistance microbes. These platforms have demonstrated to be a reliable, rapid, and efficient alternative to eliminate tenacious pathogens while avoiding the emergence of resistance mechanisms. Among the materials showing antimicrobial activity triggered by light, conjugated polymers (CPs) have risen as the most promising option to tackle this complex situation. These materials present outstanding characteristics such as high absorption coefficients, great photostability, easy processability, low cytotoxicity, among others, turning them into a powerful class of photosensitizer (PS)/photothermal agent (PTA) materials. Herein, we summarize and discuss the advances in the field of CPs with applications in photodynamic inactivation and photothermal therapy towards bacteria elimination. Additionally, a section of current challenges and needs in terms of well-defined benchmark experiments and conditions to evaluate the efficiency of phototherapies is presented.
Subject(s)
Photochemotherapy , Polymers , Anti-Bacterial Agents , Bacteria , Photosensitizing Agents/pharmacology , Phototherapy , Polymers/pharmacologyABSTRACT
Glioblastoma is the most severe form of brain cancer. Despite multimodal therapy combining surgery, radiotherapy and chemotherapy, prognosis of patients is dismal. It has been observed that the surgical resection guided by photosensitizer fluorescence followed by photodynamic therapy (PDT) prolongs the average survival in patients with glioblastoma. The main problem with all oncological treatments, including PDT, is the presence of resistant cells. The objective of this study was to isolate and perform an initial characterization of human glioblastoma cells resistant to PDT employing methyl-5-aminolevulinic acid. We obtained resistant cells from the T98 G cell line. Resistant populations accumulated less photosensitizer, formed spheroids of higher number of cells, had higher tumorigenic capacity, and expressed higher mRNA levels of fibroblastic growth factor receptor (FGFR), epidermal growth factor receptor (EGFR) and ß-platelet-derived growth factor receptor (ßPDGFR) than parental cells. The studies of glioblastoma resistance to PDT would help to better understand the causes of tumor recurrence after PDT and to develop new therapeutic proposals in this field of oncology.
Subject(s)
Glioblastoma , Photochemotherapy , Aminolevulinic Acid/pharmacology , Aminolevulinic Acid/therapeutic use , Cell Line, Tumor , Glioblastoma/drug therapy , Humans , Neoplasm Recurrence, Local , Photochemotherapy/methods , Photosensitizing Agents/pharmacology , Photosensitizing Agents/therapeutic useABSTRACT
Aim: To assess monocyte-based delivery of conjugated polymer nanoparticles (CPNs) for improved photodynamic therapy (PDT) in glioblastoma (GBM). Materials & methods: Human monocyte cells (THP-1) and murine monocytes isolated from bone marrow (mBMDMs) were employed as stealth CPN carriers to penetrate into GBM spheroids and an orthotopic model of the tumor. The success of PDT, using this cell-mediated targeting strategy, was determined by its effect on the spheroids. Results: CPNs did not affect monocyte viability in the absence of light and did not show nonspecific release after cell loading. Activated monocytes incorporated CPNs in a higher proportion than monocytes in their naive state, without a loss of cellular functionality. In vitro PDT efficacy using cell-mediated delivery was superior to that using non vehiculized CPNs. Conclusion: CPN-loaded monocytes could efficiently deliver CPNs into GBM spheroids and the orthotopic model. Improved PDT in spheroids was confirmed using this delivery strategy.
Subject(s)
Glioblastoma , Monocytes , Nanoparticles , Photochemotherapy , Animals , Cell Line, Tumor , Drug Delivery Systems , Glioblastoma/drug therapy , Mice , Polymers/therapeutic useABSTRACT
Photodynamic inactivation (PDI) protocols using photoactive metallated porphyrin-doped conjugated polymer nanoparticles (CPNs) and blue light were developed to eliminate multidrug-resistant pathogens. CPNs-PDI protocols using varying particle concentrations and irradiation doses were tested against nine pathogenic bacterial strains including antibiotic-resistant bacteria of the ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) pathogens group. The bactericidal effect was achieved in methicillin-resistant Staphylococus aureus (S. aureus) strains using low light doses (9.6-14.4 J/cm2), while Gram-negative bacteria required a higher light dose (28.8 J/cm2). The bacteria-CPN interaction was studied through flow cytometry, taking advantage of the intrinsic CPN fluorescence, demonstrating that CPNs efficiently bind to the bacterial envelope. Finally, the performance of CPNs-PDI was explored in biofilms; good antibiofilm ability and almost complete eradication were observed for S. aureus and Escherichia coli biofilms, respectively, using confocal microscopy. Overall, we demonstrated that CPNs-PDI is an efficient tool not only to kill superbugs as sessile cells but also to disrupt and eradicate biofilms of highly relevant pathogenic bacterial species.
Subject(s)
Nanoparticles , Porphyrins , Bacteria , Biofilms , Plankton , Polymers , Porphyrins/pharmacology , Staphylococcus aureusABSTRACT
The use of conjugated polymer nanoparticles (CP NPs) of poly(9,9-dioctylfluorene-alt-benzothiadiazole) and poly(9,9-di-n-octylfluorenyl-2,7-diyl) as efficient photoinitiator systems (PIS) of vinyl polymerization in water is reported herein. CP NPs are biocompatible, excitable with blue commercial LEDs and, unlike visible light Type II PIS, do not need co-initiators to trigger a monomer chain reaction. CP NPs photoinitiate polymerization of a variety of acrylic monomers with initiation rates comparable to those observed for well-known Type II PIS. Given the extraordinarily large molar absorption coefficients of CP NPs (≈108 m-1 cm-1 ) very low particle concentration is required for effective polymerization. Additionally, CP NPs behave as conventional macrophotoinitiators significantly reducing contamination risks due to leaching of low molecular weight byproducts. These combined features make CP NPs PIS suitable to synthesize polymeric materials for many healthcare and biomedical applications including drug delivery, tissue engineering, prosthetic implants, and food/medicine packaging. These CP NPs PIS are also used to synthesize nano-hydrogels with a relatively narrow and controlled size distribution in the absence of surfactants. It is proposed that polymerization is initiated at the CP NPs surface by photogenerated free polarons, in close analogy to the mechanism previously described for PIS based on inorganic semiconductor NPs.
Subject(s)
Light , Nanoparticles/chemistry , Polymers/chemistry , Vinyl Compounds/chemical synthesis , Particle Size , Polymerization , Solubility , Surface Properties , Vinyl Compounds/chemistry , Water/chemistryABSTRACT
The development of convenient synthetic methods and improved materials for the production of high load-capacity and biocompatible drug delivery systems is a challenging task with important implications in health sciences. In this work, acrylamide/2-hydroxyethylmethacrylate and N-isopropylacrylamide/2-hydroxyethylmethacrylate hydrogels were synthesized by photopolymerization using energy-efficient green-LEDs. A functionalized silsesquioxane was used as both crosslinker and co-initiator for the photopolymerization. The hybrid organic-inorganic nature of the silsesquioxane improved the resulting hydrogels' properties increasing their swelling capacity and biocompatibility. Additionally, the mild conditions used during the photopolymerization allowed the synthesis of hydrogels in the presence of antibiotics yielding high load-capacity materials in which the drug preserves its molecular structure and antimicrobial activity (as confirmed by HPLC and microbiological assays). The materials were characterized by FTIR, DSC and SEM. Additionally, the kinetics of gels´ swelling and drug release were studied under physiological conditions (pHâ¯7.4 and 37⯰C). The results demonstrate how hydrogel composition affects the antibiotics-release kinetics. The final drug release percentage increased with increasing molar fraction of acrylamide or N-isopropylacrylamide and in most cases exceeded 85%. Finally, the antibacterial effect of loaded gels was characterized using a number of assays against Gram negative and Gram positive bacteria. The observed antibacterial effect correlated well with swelling and drug release results. Furthermore, gels are not toxic for isolated erythrocytes as demonstrated by haemolytic tests. Overall, our results indicate that the produced hydrogels are promising materials to develop controlled drug-delivery devices such as capsules, dermatological patches and others.
Subject(s)
Anti-Bacterial Agents/pharmacology , Hydrogels/chemistry , Polymerization , Acrylamides/chemistry , Ampicillin/pharmacology , Delayed-Action Preparations/pharmacology , Drug Liberation , Escherichia coli/drug effects , Escherichia coli/growth & development , Gentamicins/pharmacology , Hemolysis/drug effects , Humans , Hydrogels/chemical synthesis , Kinetics , Methacrylates/chemistry , Microbial Sensitivity Tests , Spectroscopy, Fourier Transform Infrared , Staphylococcus aureus/drug effects , WaterABSTRACT
In this study, the phytoplankton structure of a freshwater reservoir located in central Argentina (Embalse Río Tercero) was analyzed using Beutler's method (Photosynthesis Research 72: 39-53, 2002), aiming to provide water quality control agencies with a reliable tool for early detection of algae blooms, particularly cyanobacteria. The method estimated the concentration of chlorophyll a (Chl a) contributed by individual algal groups in a real sample by fitting its fluorescence excitation spectrum to a linear combination of norm spectra of relevant algae groups. To this purpose, norm spectra for five algae genera usually found in Embalse Río Tercero, Microcystis, Chlorella, Cyclotella, Ceratium and Porphyridium, were constructed and posteriorly used to analyze samples collected in the reservoir in years 2014-2016. Results showed that the method worked well for the quick identification of the algae present in the samples, but it tended to overestimate its Chl a contents. This error was attributed to the large heterogeneity of the algal populations due to the aging of cells grown in environmental conditions.
ABSTRACT
Conjugated polymer nanoparticles are widely used in fluorescent labeling and sensing, as they have mean radii between 5 and 100 nm, narrow size dispersion, high brightness, and are photochemically stable, allowing single particle detection with high spatial and temporal resolution. Highly crosslinked polymers formed by linking individual chains through covalent bonds yield high-strength rigid materials capable of withstanding dissolution by organic solvents. Hence, the combination of crosslinked polymers and conjugated polymers in a nanoparticulated material presents the possibility of interesting applications that require the combined properties of constituent polymers and nanosized dimension. In the present work, F8BT@pEGDMA nanoparticles composed of poly(ethylene glycol dimethacrylate) (pEGDMA; a crosslinked polymer) and containing the commercial conjugated polymer poly(9,9-dioctylfluorene-alt-benzothiadiazole) (F8BT) were synthesized and characterized. Microemulsion polymerization was applied to produce F8BT@pEDGMA particles with nanosized dimensions in a â¼25% yield. Photophysical and size distribution properties of F8BT@pEDGMA nanoparticles were evaluated by various methods, in particular single particle fluorescence microscopy techniques. The results demonstrate that the crosslinking/polymerization process imparts structural rigidity to the F8BT@pEDGMA particles by providing resistance against dissolution/disintegration in organic solvents. The synthesized fluorescent crosslinked nanoparticles contain (for the most part) single F8BT chains and can be detected at the single particle level, using fluorescence microscopy, which bodes well for their potential application as molecularly imprinted polymer fluorescent nanosensors with high spatial and temporal resolution.
ABSTRACT
Lithium diphenylphosphide unexpectedly provokes the ring-opening of tetrahydrofuran (THF) and by reaction with 3,6-dichloropyridazine leads to the formation of the ligand 3-chloro-6-(4-diphenylphosphinyl)butoxypyridazine (Pâ¯N), which was isolated. The reaction of this ligand with the (Re(CO)3(THF)Br)2 dimer yields the novel complex [Br(CO)3Re(µ-3-chloro-6-(4-diphenylphosphinyl)butoxypyridazine)2Re(CO)3Br] (BrRe(Pâ¯N)(Nâ¯P)ReBr), which was crystallized in the form of a chloroform solvate, (C46H40Br2Cl2N4O8P2Re2)·(CHCl3). The monoclinic crystal (P21/n) displays a bimetallic cage structure with a symmetry inversion centre in the middle of the rhenium to rhenium line. The molecule shows two oxidation signals occurring at +1.50 V and +1.76 V which were assigned to the ReI/ReII and ReII/ReIII metal-centered couples, respectively, while signals observed at -1.38 V and -1.68 V were assigned to ligand centered reductions. Experimental and DFT/TDDFT results indicate that the UV-Vis absorption maximum of BrRe(Pâ¯N)(Nâ¯P)ReBr occurring near 380 nm displays a metal to ligand charge transfer (MLCT) character, which is consistent with CV results. Upon excitation at this wavelength, a weak emission (Φem < 1 × 10-3) is observed around 580 nm (in dichloromethane) which decays with two distinct lifetimes τ1 and τ2 of 24 and 4.7 ns, respectively. The prevalence of non-radiative deactivation pathways is consistent with efficient internal conversion induced by the high conformational flexibility of the Pâ¯N ligand's long carbon chain. Measurements in a frozen solvent at 77 K, where vibrational deactivation is hindered, show intense emission associated with the 3MLCT state. These results demonstrate that BrRe(Pâ¯N)(Nâ¯P)ReBr preserves the dual emitting nature previously reported for the mononuclear complex RePNBr, with emission associated with and states.
ABSTRACT
The development of dye-sensitized solar cells requires an in-depth understanding of the interfacial charge-transfer dynamics that take place between dye sensitizers and semiconductors. Here, we describe a prototype system to probe these dynamics by monitoring in real time the fluorescence of two organic sensitizers, a perylene and a squaraine, bound to a SnO2 semiconductor thin film as a function of potentiostatic control of the Fermi level. The two different sensitizer fluorophores characterized by vastly different redox potentials undergo similar fluorescence modulation with applied bias, an indication that the density of states of the semiconductor largely influences the charge-transfer dynamics while energetics play a minimal role. We further show that the rate of photodegradation of the perylene sensitizer with applied bias provides a suitable marker to study the rate of charge injection and charge recombination. Taken together, our results demonstrate a suitable platform to visualize and study charge-transfer dynamics on films and constitute a step toward achieving single-molecule resolution in our quest to decipher the static and dynamic heterogeneity of charge-transfer dynamics in dye-sensitized photoanodes.
ABSTRACT
The photosensitization effect of three perylene dye derivatives on titanium dioxide nanoparticles (TiO2 NPs) has been investigated. The dyes used, 1,7-dibromoperylene-3,4,9,10-tetracarboxy dianhydride (1), 1,7-dipyrrolidinylperylene-3,4,9,10-tetracarboxy dianhydride (2) and 1,7-bis(4-tert-butylphenyloxy)perylene-3,4,9,10-tetracarboxy dianhydride (3) have in common bisanhydride groups that convert into TiO2 binding groups upon hydrolysis. The different substituents on the bay position of the dyes enable tuning of their redox properties to yield significantly different driving forces for photoinduced electron transfer (PeT). Recently developed TiO2 NPs having a small average size and a narrow distribution (4 ± 1 nm) are used in this work to prepare the dye-TiO2 systems under study. Whereas successful sensitization was obtained with 1 and 2 as evidenced by steady-state spectral shifts and transient absorption results, no evidence for the attachment of 3 to TiO2 was observed. The comparison of the rates of PeT (kPeT ) for 1- and 2-TiO2 systems studied in this work with those obtained for previously reported analogous systems, having TiO2 NPs covered by a surfactant layer (Hernandez et al. [2012] J. Phys. Chem. B., 117, 4568-4581), indicates that kPeT for the former systems is slower than that for the later. These results are interpreted in terms of the different energy values of the conduction band edge in each system.
Subject(s)
Electron Transport , Nanostructures , Perylene/chemistry , Photochemistry , Titanium/chemistry , Spectrometry, FluorescenceABSTRACT
We report on the photosensitization of titanium dioxide nanoparticles (TiO2 NPs) synthesized inside AOT (bis(2-ethylhexyl) sulfosuccinate sodium salt) reverse micelles following photoexcitation of perylene derivatives with dicarboxylate anchoring groups. The dyes, 1,7-dibromoperylene-3,4,9,10-tetracarboxy dianhydride (1), 1,7-dipyrrolidinylperylene-3,4,9,10-tetracarboxy dianhydride (2), and 1,7-bis(4-tert-butylphenyloxy)perylene-3,4,9,10-tetracarboxy dianhydride (3), have considerably different driving forces for photoinduced electron injection into the TiO2 conduction band, as estimated by electrochemical measurements and quantum mechanical calculations. Fluorescence anisotropy measurements indicate that dyes 1 and 2 are preferentially solubilized in the micellar structure, creating a relatively large local concentration that favors the attachment of the dye to the TiO2 surface. The binding process was followed by monitoring the hypsochromic shift of the dye absorption spectra over time for 1 and 2. Photoinduced electron transfer from the singlet excited state of 1 and 2 to the TiO2 conduction band (CB) is indicated by emission quenching of the TiO2-bound form of the dyes and confirmed by transient absorption measurements of the radical cation of the dyes and free carriers (injected electrons) in the TiO2 semiconductor. Steady state and transient spectroscopy indicate that dye 3 does not bind to the TiO2 NPs and does not photosensitize the semiconductor. This observation was rationalized as a consequence of the bulky t-butylphenyloxy groups which create a strong steric impediment for deep access of the dye within the micelle structure to reach the semiconductor oxide surface.
Subject(s)
Metal Nanoparticles/chemistry , Micelles , Perylene/analogs & derivatives , Perylene/chemistry , Pyrrolidines/chemistry , Titanium/chemistry , Electron Transport , Fluorescence Polarization , Light , Quantum Theory , Scattering, Radiation , ThermodynamicsABSTRACT
Single-particle fluorescence spectroelectrochemistry was used to investigate the electrochemical oxidation of isolated, immobilized particles of the conjugated polymers BEH-PPV and MEH-PPV at an indium tin oxide (ITO) electrode immersed in an electrolyte solution. Two types of particles were investigated: (i) polymer single molecules (SM) and (ii) nanoparticle (NP) aggregates of multiple polymer single molecules. For the BEH-PPV polymer, the observation of nearly identical lowest oxidation potentials for different SM in the ensemble is evidence for effective electrostatic screening by the surrounding electrolyte solution. A combination of Monte Carlo simulations and application of Poisson-Boltzmann solvers were used to model the charging of polymer single molecules and nanoparticles in the electrochemical environment. The results indicate that the penetration of electrolyte anions into the polymer nanoparticles is necessary to produce the observed narrow fluorescence quenching vs oxidation potential curves. Finally, fluorescence-lifetime single-molecule spectroelectrochemical (SMS-EC) data revealed that at low potential an excited state reduction process (i.e., electron transfer from ITO to the polymer) is probably the dominant fluorescence quenching process.
ABSTRACT
We report the discovery of soliton-like electrogenerated chemiluminescence (ECL) waves in the electrochemical oxidation of thin films (15-250 nm) of the semiconducting conjugated polymer poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8BT). The ECL "wave fronts" were visualized and imaged in space and time by optical emission microscopy and observed to freely propagate parallel to the plane of the electrode. The data reveal that the EC solitons are triggered by the flux of electrolytes into the polymer film at nanoscale "leaks" (or defects) and propagate by a highly nonlinear, positive-feedback kinetic mechanism involving EC oxidation, mass transport of electrolyte anions, and oxidation-induced swelling, all taking place within the conjugated polymer film. Several model systems with spatially distributed reaction "triggers" were studied to elucidate the mechanistic details of this complex oxidation process in polymer films.
ABSTRACT
New insights on the molecular level details of the recently reported light-assisted injection of positive charge into single conjugated polymer chains are reported. Extensive new fluorescence-voltage single molecule spectroscopy (FV-SMS) measurements were performed on single chains of the archetypical conjugated polymer MEH-PPV embedded in a capacitor device to complement previous studies of the influence of the bias scan rate and optical excitation intensity. The use of a vacuum microscope allowed for the precise control of the device atmosphere, demonstrating the influence of triplet states in the MEH-PPV on the FV-SMS modulation. For identical device conditions, little variation was observed in the rate and yield of charging from molecule to molecule. Through the use of thicker supporting matrices and insulating polymer "blocking layers", it was determined that good electrical contact between the hole transport layers and the single molecules was necessary for charge injection. The results demonstrate the complexity of charge transfer processes at the interface of organic semiconductors and highlight the ability of single molecule methods to advance the understanding of such processes at the nanoscale.
ABSTRACT
The injection of positive charge carriers (holes) into a single conjugated polymer chain was observed to be light-assisted. This effect may underlie critical, poorly understood organic electronic device phenomena such as the build-up of functional deeply trapped charge layers in polymer light emitting diodes. The charging/discharging dynamics were investigated indirectly by a variety of single molecule electro-optical spectroscopic techniques, including an "image-capture" approach.
ABSTRACT
We demonstrate a novel and powerful method to study electrogenerated chemiluminescence (ECL) of single nanoparticles (NPs) (r = 25 +/- 15 nm) of a conjugated polymer, F8BT, on an ITO electrode in the presence of a co-reactant, such as tri-n-propylamine (TPrAH) in acetonitrile solution. The results reveal that the maximum formation rate of ECL of individual NPs is achieved after a long "build-up" time (10-40 s after pulse application). The high number of detected ECL photons from individual NPs (1500 photons during 100 s) highlights the potential of this technique as a very sensitive analytical method. Additionally, TPrAH acts as a very efficient protecting agent against irreversible electrochemical processes occurring in F8BT, as found in photoluminescence studies. This protection mechanism probably involves the neutralization of holes at the particle surface via electron transfer by both TPrAH and TPrA radical (TPrA*).
ABSTRACT
Laser-induced optoacoustic spectroscopy (LIOAS) measurements with carotene-porphyrin-acceptor "supermolecular" triads (C-P-A, with A = C60, a naphthoquinone NQ, and a naphthoquinone derivative, Q) were carried out with the purpose of analyzing the thermodynamic parameters for the formation and decay of the respective long-lived charge separated state C*+-P-A*-. The novel procedure of inclusion of the benzonitrile solutions of the triads in Triton X-100 micelle nanoreactors suspended in water permitted the separation of the enthalpic and structural volume change contributions to the LIOAS signals, by performing the measurements in the range 4-20 degrees C. Contractions of 4.2, 5.7, and 4.2 mL mol-1 are concomitant with the formation of C*+-P-A*- for A = C60, Q and NQ, respectively. These contractions are mostly attributed to solvent movements and possible conformational changes upon photoinduced electron transfer, due to the attraction of the oppositely charged ends, as a consequence of the giant dipole moment developed in these compounds upon charge separation ( approximately 110 D). The estimations combining the calculated free energies and the LIOAS-derived enthalpy changes indicate that entropy changes, attributed to solvent movements, control the process of electron transfer for the three triads, especially for C-P-C60 and C-P-Q. The heat released during the decay of 1 mol of charge separated state (CS) is much smaller than the respective enthalpy content obtained from the LIOAS measurements for the CS formation. This is attributed to the production of long-lived energy storing species upon CS decay.