ABSTRACT
Honeybees are insects very sensitive to environmental pollution and at the same time very good indicators of the pollution levels for certain types of pollutants. The morphology and ethology of these insects make them perfect vectors for dust and substances, including heavy metals produced by anthropic activities or naturally generated and deposited on foraged flora. When bees are raised to produce foods such as honey and pollen, they can easily transfer pollutants collected from contaminated flower affecting the quality of these products. However, depending on geographical location of the apiaries and their distance from pollution sources, the risk to contaminate bee products can be higher or lower requiring deep investigations. In this study, two apiaries were built near ground transport infrastructures and used as monitoring stations for investigating heavy metal presence in beehive products such as bee wax, pollen, and honey. Another apiary was placed between these two locations at a distance of 500 m from each one and used as central node to asses possible diffusion trends. Parallel, air quality was monitored in the proximity of each apiary to verify the air pollution of the environments close to these sites. The results of the study suggest that the presence of the highway and the train station affected the levels of heavy metal presence in the apiary products. Air quality near apiaries was also negatively affected by ground transport, especially in proximity of the highway. Wax resulted significantly more polluted in the apiary close to train station with elements such as Al, Zn, and Ni, while honey and pollen were significantly more polluted in the proximity of the highway with elements such as Al, Fe, Cu, and Zn. Honey was the product suffering less the contamination by heavy metals while pollen was the worse. In conclusion, the presence of transportation nodes determined a higher accumulation of heavy metals in beehive products respect the apiary placed in between, suggesting to pay particular attention in the site selection for the placement of apiaries to protect both bees and human health.
Subject(s)
Environmental Monitoring , Honey , Metals, Heavy , Bees , Metals, Heavy/analysis , Animals , Honey/analysis , Pollen/chemistryABSTRACT
The growing global energy demand requires the continuous development and optimization of the production of alternative energy sources. According to the circular economy approach, waste conversion into biogas and biomethane represent an interesting energy source. The input into the distribution network and energy conversion systems of biomethane requires quality monitoring and the use of cleaning up systems. Therefore, there is a need to constantly invest in the development of sampling and analysis systems that save time, costs, and materials. The purpose of this study was to use activated porous carbon fiber (APCF), an extremely versatile material for sampling and analysis by thermal desorption, to show the advantages it has over the adsorbents traditionally used for siloxane monitoring. Siloxanes are among the contaminating compounds that are mainly present in biogas and biomethane, and if not removed sufficiently, they endanger the quality and use of the gas. These are highly harmful compounds since during combustion, they produce quartz particles that are abrasive to the surfaces of the materials involved in the energy production process. In addition, siloxanes directly hinder the energy properties of biomethane during combustion, due to their radical scavenger properties. In this work, the efficiency of APCF tube was evaluated by comparing it with common multilayer tube thought sampling and analyzing siloxanes in lab scale and in real scale (biogas plant). Thermal desorption analysis coupled with GC-MS for the determination of siloxanes showed that the use of APCF allows to obtain better performance. This allows to deduce that APCF is an innovative material for the establishment of a better sampling and analysis method than the current ones, enabling better results to be achieved in the process of monitoring fuel quality in biomethane production and storage facilities.
Subject(s)
Biofuels , Siloxanes , Biofuels/analysis , Carbon Fiber , Charcoal , Porosity , Siloxanes/analysisABSTRACT
The adverse effects of atmospheric particulate matter (PM) on health and ecosystems, as well as on meteorology and climate change, are well known to the scientific community. It is therefore undeniable that a good understanding of the sources of PM is crucial for effective control of emissions and to protect public health. One of the major contributions to atmospheric PM is biomass burning, a practice used both in agriculture and home heating, which can be traced and identified by analyzing sugars emitted from the combustion of cellulose and hemicellulose that make up biomass. In this review comparing almost 200 selected articles, we highlight the most recent studies that broaden such category of tracers, covering research publications on residential wood combustions, open-fire or combustion chamber burnings and ambient PM in different regions of Asia, America and Europe. The purpose of the present work is to collect data in the literature that indicate a direct correspondence between biomass burning and saccharides emitted into the atmosphere with regard to distinguishing common sugars attributed to biomass burning from those that have co-causes of issue. In this paper, we provide a list of 24 compounds, including those most commonly recognized as biomass burning tracers (i.e., levoglucosan, mannosan and galactosan), from which it emerges that monosaccharide anhydrides, sugar alcohols and primary sugars have been widely reported as organic tracers for biomass combustion, although it has also been shown that emissions of these compounds depend not only on combustion characteristics and equipment but also on fuel type, combustion quality and weather conditions. Although it appears that it is currently not possible to define a single compound as a universal indicator of biomass combustion, this review provides a valuable tool for the collection of information in the literature and identifies analytes that can lead to the determination of patterns for the distribution between PM generated by biomass combustion.
Subject(s)
Air Pollutants , Particulate Matter , Air Pollutants/analysis , Biomass , Ecosystem , Environmental Monitoring , Particulate Matter/analysis , Sugars/analysisABSTRACT
The combustion of biomass is a process that is increasingly used for the generation of heat and energy through different types of wood and agricultural waste. The emissions generated by the combustion of biomass include different kinds of macro- and micropollutants whose formation and concentration varies according to the physical and chemical characteristics of the biomass, the combustion conditions, the plants, and the operational parameters of the process. The aim of this work is to evaluate the effect of biomass moisture content on the formation of volatile organic compounds (VOCs) during the combustion process. Wet and dry poplar chips, with a moisture content of 43.30% and 15.00%, respectively, were used in a cogeneration plant based on a mobile grate furnace. Stack's emissions were sampled through adsorbent tubes and subsequently analyzed by thermal desorption coupled with the GC/MS. The data obtained showed that, depending on the moisture content of the starting matrix, which inevitably influences the quality of combustion, there is significant variation in the production of VOCs.
Subject(s)
Biomass , Environmental Monitoring/methods , Hot Temperature , Populus/chemistry , Volatile Organic Compounds/analysis , Wood/chemistry , Gas Chromatography-Mass SpectrometryABSTRACT
The effects of nitrogen (N) deposition, tropospheric ozone (O3) and their interaction were investigated in two Mediterranean tree species, Fraxinus ornus L. (deciduous) and Quercus ilex L. (evergreen), having different leaf habits and resource use strategies. An experiment was conducted under controlled condition to analyse how nitrogen deposition affects the ecophysiological and biochemical traits, and to explore how the nitrogen-induced changes influence the response to O3. For both factors we selected realistic exposures (20 kg N ha-1 yr-1 and 80 ppb h for nitrogen and O3, respectively), in order to elucidate the mechanisms implemented by the plants. Nitrogen addition resulted in higher nitrogen concentration at the leaf level in F. ornus, whereas a slight increase was detected in Q. ilex. Nitrogen enhanced the maximum rate of assimilation and ribulose 1,5-bisphosphate regeneration in both species, whereas it influenced the light harvesting complex only in the deciduous F. ornus that was also affected by O3 (reduced assimilation rate and accelerated senescence-related processes). Conversely, Q. ilex developed an avoidance mechanism to cope with O3, confirming a substantial O3 tolerance of this species. Nitrogen seemed to ameliorate the harmful effects of O3 in F. ornus: the hypothesized mechanism of action involved the production of nitrogen oxide as the first antioxidant barrier, followed by enzymatic antioxidant response. In Q. ilex, the interaction was not detected on gas exchange and photosystem functionality; however, in this species, nitrogen might stimulate an alternative antioxidant response such as the emission of volatile organic compounds. Antioxidant enzyme activity was lower in plants treated with both O3 and nitrogen even though reactive oxygen species production did not differ between the treatments.