ABSTRACT
In this study, thin films based on hyaluronic acid (HA) with tannic acid (TA) were investigated in three different weight ratios (80HA/20TA, 50HA/50TA, 20HA/80TA) for their application as materials for wound healing. Surface free energy, as well as their roughness, mechanical properties, water vapor permeability rate, and antioxidant activity were determined. Moreover, their compatibility with blood and osteoblast cells was investigated. The irritation effect caused by hyaluronic acid/tannic acid films was also considered with the use of are constructed human epidermis model. The irritation effect for hyaluronic acid/tannic acid films by the in vitro method was also studied. The low surface free energy, surface roughness, and antioxidant activity presented by the obtained films were examined. All the tested compositions of hyaluronic acid/tannic acid films were hemocompatible, but only films based on 50HA/50TA were fully cytocompatible. Regarding the potential implantation, all the films except 80HA/20TA showed appropriate mechanical properties. The specimens did not exert the irritation effect during the studies involving reconstructed human epidermis.
Subject(s)
Antioxidants , Hyaluronic Acid , Humans , Hyaluronic Acid/pharmacology , Wound Healing , PermeabilityABSTRACT
Tannic acid (TA) is a natural compound studied as the cross-linker for biopolymers due to its ability to form hydrogen bonds. There are different methods to improve its reactivity and effectiveness to be used as a modifier for biopolymeric materials. This work employed plasma to modify tannic acid TA, which was then used as a cross-linker for fabricating collagen/gelatin scaffolds. Plasma treatment did not cause any significant changes in the structure of TA, and the resulting oxidized TA showed a higher antioxidant activity than that without treatment. Adding TA to collagen/gelatin scaffolds improved their mechanical properties and stability. Moreover, the obtained plasma-treated TA-containing scaffolds showed antibacterial properties and were non-hemolytic, with improved cytocompatibility towards human dermal fibroblasts. These results suggest the suitability of plasma treatment as a green technology for the modification of TA towards the development of advanced TA-crosslinked hydrogels for various biomedical applications.
Subject(s)
Gelatin , Plasma Gases , Polyphenols , Humans , Gelatin/chemistry , Hydrogels/chemistry , Tannins/chemistry , Collagen/chemistry , TechnologyABSTRACT
Over the past decade, much attention has been paid to chitosan as a potential drug carrier because of its non-toxicity, biocompatibility, biodegradability and antibacterial properties. The effect of various chitosan characteristics on its ability to carry different antibiotics is discussed in the literature. In this work, we evaluated the influence of the different molecular weights of this polymer on its potential as an antibacterial membrane after adding gentamicin (1% w/w). Three types of chitosan membranes without and with antibiotic were prepared using a solvent casting process. Their microstructures were analyzed with a 4K digital microscope, and their chemical bonds were studied using FTIR spectroscopy. Furthermore, cytocompatibility on human osteoblasts and fibroblasts as well as antibacterial activity against Staphylococcus aureus (S. aureus.) and Escherichia coli (E. coli) were assessed. We observed that the membrane prepared from medium-molecular-weight chitosan exhibited the highest contact angle (≈85°) and roughness (10.96 ± 0.21 µm) values, and its antibacterial activity was unfavorable. The maximum tensile strength and Young's modulus of membranes improved and elongation decreased with an increase in the molecular weight of chitosan. Membranes prepared with high-molecular-weight chitosan possessed the best antibacterial activity, but mainly against S. aureus. For E. coli, is not advisable to add gentamicin to the chitosan membrane, or it is suggested to deplete its content. None of the fabricated membranes exhibited a full cytotoxic effect on osteoblastic and fibroblast cells. Based on our results, the most favorable membrane as a gentamicin carrier was obtained from high-molecular-weight chitosan.
ABSTRACT
The aim of the experiment was to study the morphology of collagen-based scaffolds modified by caffeic acid, ferulic acid, and gallic acid, their swelling, and degradation rate, as well as the biological properties of scaffolds, such as antioxidant activity, hemo- and cytocompatibility, histological observation, and antibacterial properties. Scaffolds based on collagen with phenolic acid showed higher swelling rate and enzymatic stability compared to scaffolds based on pure collagen, and the radical scavenging activity was in the range 85-91%. All scaffolds were non-hemolytic and compatible with surrounding tissues. Collagen modified by ferulic acid showed potentially negative effects on hFOB cells as a significantly increased LDH release was found, but all of the studied materials had antimicrobial activity against Staphylococcus aureus and Escherichia coli. It may be assumed that phenolic acids, such as caffeic, ferulic, and gallic acid, are modifiers and provide novel biological properties of collagen-based scaffolds. This paper provides the summarization and comparison of the biological properties of scaffolds based on collagen modified with three different phenolic acids.
Subject(s)
Collagen , Tissue Engineering , Collagen/pharmacology , Gallic Acid/pharmacologyABSTRACT
Staphylococcus aureus strains are particularly often isolated from patients with SARS-CoV-2 infection. The aim of the current research was to determine whether the SARS-CoV-2 virus infection affects the protein profile of S. aureus. Bacteria were isolated from the forty swabs collected from the patients in the hospitals of the Pomeranian region. MALDI-TOF MS spectra were obtained using a Microflex LT instrument. Twenty-nine peaks were identified. The peak (2,430) is described here for the first time and was unique for the isolates from patients infected with the SARS-CoV-2 virus. These results support the hypothesis of bacterial adaptation to the conditions caused by viral infection.
Subject(s)
COVID-19 , Staphylococcal Infections , Humans , Staphylococcus aureus , SARS-CoV-2 , Staphylococcus , Staphylococcal Infections/microbiology , Bacteria , Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization/methodsABSTRACT
This paper concerns the physicochemical properties of chitosan/phenolic acid thin films irradiated by ultraviolet radiation with wavelengths between 200 and 290 nm (UVC) light. We investigated the preparation and characterization of thin films based on chitosan (CTS) with tannic (TA), caffeic (CA) and ferulic acid (FA) addition as potential food-packaging materials. Such materials were then exposed to the UVC light (254 nm) for 1 and 2 h to perform the sterilization process. Different properties of thin films before and after irradiation were determined by various methods such as Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscopy (AFM), differential scanning calorimeter (DSC), mechanical properties and by the surface free energy determination. Moreover, the antimicrobial activity of the films and their potential to reduce the risk of contamination was assessed. The results showed that the phenolic acid improving properties of chitosan-based films, short UVC radiation may be used as sterilization method for those films, and also that the addition of ferulic acid obtains effective antimicrobial activity, which have great benefit for food packing applications.
Subject(s)
Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Chitosan/chemistry , Hydroxybenzoates/chemistry , Ultraviolet Rays , Bacterial Adhesion/drug effects , Calorimetry, Differential Scanning , Chemical Phenomena , Mechanical Phenomena , Microbial Sensitivity Tests , Microscopy, Atomic Force , Spectroscopy, Fourier Transform InfraredABSTRACT
The risk of an early inflammation after implantation surgery of titanium implants has caused the development of different antimicrobial measures. The present research is aimed at characterizing the effects of nanosilver and nanocopper dispersed in the nanohydroxyapatite coatings, deposited on the Ti13Zr13Nb alloy, and on the chemical and biological properties of the coatings. The one-stage deposition process was performed by the electrophoretic method at different contents of nanomaterials in suspension. The surface topography of the coatings was examined with scanning electron microscopy. The wettability was expressed as the water contact angle. The corrosion behavior was characterized by the potentiodynamic technique. The release rate of copper and silver into the simulated body fluid was investigated by atomic absorption spectrometry. The antibacterial efficiency was evaluated as the survivability and adhesion of the bacteria and the growth of the biofilm. The cytotoxicity was assessed for osteoblasts. The results demonstrate that silver and copper increase the corrosion resistance and hydrophilicity. Both elements together effectively kill bacteria and inhibit biofilm growth but appear to be toxic for osteoblasts. The obtained results show that the nanohydroxyapatite coatings doped with nanosilver and nanocopper in a one-stage electrophoretic process can be valuable for antibacterial coatings.
Subject(s)
Alloys/chemistry , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Coated Materials, Biocompatible/chemistry , Durapatite/chemistry , Metal Nanoparticles/chemistry , Titanium/chemistry , Biofilms/drug effects , Chemical Phenomena , Copper/chemistry , Corrosion , Electrophoresis , Metal Nanoparticles/ultrastructure , Microbial Sensitivity Tests , Silver/chemistry , Surface PropertiesABSTRACT
Fractures in the craniofacial region are a serious problem in terms of treatment. The most reasonable solution is the use of individual implants dedicated to a specific patient. The aim of this study was to develop the implant system specifically for treatment of the orbital floor defects of blowout fractures of maxillofacial region, using polypropylene yarn and bone cement. Three types of bone cement were used to fix the polypropylene yarn: unmodified, antibiotic-loaded, and modified with nanometals. The following research was carried out: selection of cement production parameters, assessment of the curing time, measurement of polymerization temperature, an analysis of microstructure and surface topography, evaluation of wettability, measurement of microhardness, and studies of bactericidal effectiveness. The research confirms the possibility of using bone cement and polypropylene yarn for an individual implant, dedicated to the fractures treatment in the maxillofacial region. Moreover, the bactericidal properties of the proposed modifications for bone cement have been verified; hence, bioactive cements are recommended for use in the case of infectious complications.
Subject(s)
Bone Cements , Orbit/injuries , Orbital Fractures/surgery , Plastic Surgery Procedures , Polypropylenes , Prostheses and Implants , HumansABSTRACT
Spacers, in terms of instruments used in revision surgery for the local treatment of postoperative infection, are usually made of metal rod covered by antibiotic-loaded bone cement. One of the main limitations of this temporary implant is the debonding effect of metal-bone cement interface, leading to aseptic loosening. Material selection, as well as surface treatment, should be evaluated in order to minimize the risk of fraction and improve the implant-cement fixation the appropriate manufacturing. In this study, Ti13Zr13Nb alloys that were prepared by Selective Laser Melting and surface treated were coated with bone cement loaded with either gentamicin or nanosilver, and the effects of such alloy modifications were investigated. The SLM-made specimens of Ti13Zr13Nb were surface treated by sandblasting, etching, or grounding. For each treatment, Scanning Electron Microscope (SEM), contact profilometer, optical tensiometer, and nano-test technique carried out microstructure characterization and surface analysis. The three types of bone cement i.e., pure, containing gentamicin and doped with nanosilver were applied to alloy surfaces and assessed for cement cohesion and its adhesion to the surface by nanoscratch test and pull-off. Next, the inhibition of bacterial growth and cytocompatibility of specimens were investigated by the Bauer-Kirby test and MTS assay respectively. The results of each test were compared to the two control groups, consisting of commercially available Ti13Zr13Nb and untreated SLM-made specimens. The highest adhesion bone cement to the titanium alloy was obtained for specimens with high nanohardness and roughness. However, no explicit relation of adhesion strength with wettability and surface energy of alloy was observed. Sandblasting or etching were the best alloys treatments in terms of the adhesion of either pure or modified bone cements. Antibacterial additives for bone cement affected its properties. Gentamicin and nanosilver allowed for adequate anti-bacterial protection while maintaining the overall biocompatibility of obtained spacers. However, they had different effects on the cement's adhesive capacity or its own cohesion. Furthermore, the addition of silver nanoparticles improved the nanomechanical properties of bone cements. Surface treatment and method of fabrication of titanium affected surface parameters that had a significant impact on cement-titanium fixation.
ABSTRACT
Bacterial infections due to bone replacement surgeries require modifications of bone cement with antibacterial components. This study aimed to investigate whether the incorporation of gentamicin or nanometals into bone cement may reduce and to what extent bacterial growth without the loss of overall cytocompatibility and adverse effects in vitro. The bone cement Cemex was used as the base material, modified either with gentamicin sulfate or nanometals: Silver or copper. The inhibition of bacterial adhesion and growth was examined against five different bacterial strains along with integrity of erythrocytes, viability of blood platelets, and dental pulp stem cells. Bone cement modified with nanoAg or nanoCu revealed greater bactericidal effects and prevented the biofilm formation better compared to antibiotic-loaded bone cement. The cement containing nanoAg displayed good cytocompatibility without noticeable hemolysis of erythrocytes or blood platelet disfunction and good viability of dental pulp stem cells (DPSC). On the contrary, the nanoCu cement enhanced hemolysis of erythrocytes, reduced the platelets aggregation, and decreased DPSC viability. Based on these studies, we suggest the modification of bone cement with nanoAg may be a good strategy to provide improved implant fixative for bone regeneration purposes.
ABSTRACT
Background and Objectives: Surgical site infection (SSI) is a significant complication of non-reconstructive and reconstructive breast surgery. This study aimed to assess SSI after breast surgery over five years in a single center in Poland. The microorganisms responsible for SSI and their antibiotic susceptibilities were determined. Materials and Methods: Data from 2129 patients acquired over five years postoperatively by the Department of Surgical Oncology, Medical University of Gdansk in Poland were analyzed. Results: SSI was diagnosed in 132 patients (6.2%) and was an early infection in most cases (65.2%). The incidence of SSI was highest in patients who underwent subcutaneous amputation with simultaneous reconstruction using an artificial prosthesis (14.6%), and breast reconstruction via the transverse rectus abdominis muscle (TRAM) flap method (14.3%). Gram-positive bacteria were responsible for SSI in most cases (72.1%), and these were mainly Staphylococcus strains (53.6%). These strains were 100% susceptible to all beta-lactam antibiotics (except penicillin) but were less susceptible to macrolides and lincosamides. Conclusions: SSI is a serious problem, and attention should be focused on its prevention. Reconstruction using an artificial prosthesis or via the TRAM flap method is connected to increased SSI incidence. Further studies are required to prevent SSI following breast surgery.
Subject(s)
Breast/surgery , Surgical Wound Infection/microbiology , Adult , Aged , Anti-Bacterial Agents/therapeutic use , Breast Implants/adverse effects , Female , Humans , Incidence , Mammaplasty/adverse effects , Mammaplasty/methods , Mastectomy/adverse effects , Mastectomy/methods , Middle Aged , Poland/epidemiology , Retrospective Studies , Surgical Wound Infection/drug therapy , Surgical Wound Infection/epidemiology , Time Factors , beta-Lactams/therapeutic useABSTRACT
It is widely known that Enterococcus faecalis virulence is related to its biofilm formation. Although Enterococci are common commensal organisms of the gastrointestinal tract, the difference between commensal and pathogen strains remain unclear. In this study, we compare the biochemical profile of the biofilms formed by two groups of medical and two groups of commensal strains. The medical strains were isolated as pathogens from infections of urinary tract and other infections (wounds, pus and bedsores), and the commensal strains were taken from faeces of healthy volunteers and faeces of wild mallards (Anas platyrhynchos) living in an urban environment. The properties of biofilms formed by medical and commensal strains differed significantly. Commensal strains showed lower metabolic activity and glucose uptake and higher biofilm biomass than the medical ones. Consistent with glucose uptake experiments, we found that the glucose dehydrogenase gene was more expressed in medical strains. These results indicate that higher metabolic activity and lower protein concentration of E. faecalis cells within biofilms are formed during infections.