Computational simulation-assisted template selection of magnetic MOFs molecularly imprinted materials applying the adsorption and detection of multiple fluoroquinolones.

This study utilized computational simulation and surface molecular imprinting technology to develop a magnetic metal-organic framework molecularly imprinted polymer (Fe3O4@ZIF-8@SMIP) capable of selectively recognizing and detecting multiple fluoroquinolones (FQs). The Fe3O4@ZIF-8@SMIP material was synthesized using the "common" template-ofloxacin, identified by computational simulation, demonstrating notable adsorption capacity (88.61-212.93 mg g-1) and rapid mass-transfer features (equilibration time: 2-3 min) for all tested FQs, consistent with Langmuir adsorption model. Subsequently, this material was employed as a magnetic solid-phase-extraction adsorbent for adsorption and detection of multiple FQs by combining with high performance liquid chromatography. The developed method exhibited good linearity for various FQs within the concentration range of 0.1-500 µg L-1, with low limit of detection (0.0605-0.1529 µg L-1) and limit of quantitation (0.2017-0.5097 µg L-1). Satisfactory recoveries (88.38-103.44%) were obtained when applied to spiked food samples, demonstrating the substantial potential of this Fe3O4@ZIF-8@SMIP material for rapid enrichment and identification for multiple FQs residues.

Highly Stretchable, Transparent, Self-Healing Ion-Conducting Elastomers for Long-Term Reliable Human Motion Detection.

The flexible electronic sensor is a critical component of wearable devices, generally requiring high stretchability, excellent transmittance, conductivity, self-healing capability, and strong adhesion. However, designing ion-conducting elastomers meeting all these requirements simultaneously remains a challenge. In this study, a novel approach is presented to fabricate highly stretchable, transparent, and self-healing ion-conducting elastomers, which are synthesized via photo-polymerization of two polymerizable deep eutectic solvents (PDESs) monomers, i.e., methacrylic acid (MAA)/choline chloride (ChCl) and itaconic acid (IA)/ChCl. The as-prepared ion-conducting elastomers possess outstanding properties, including high transparency, conductivity, and the capability to adhere to various substrates. The elastomers also demonstrate ultra-stretchability (up to 3900%) owing to a combination of covalent cross-linking and noncovalent cross-linking. In addition, the elastomers can recover up to 3250% strain and over 94.5% of their original conductivity after self-healing at room temperature for 5 min, indicating remarkable mechanical and conductive self-healing abilities. When utilized as strain sensors to monitor real-time motion of human fingers, wrist, elbow, and knee joints, the elastomers exhibit stable and strong repetitive electrical signals, demonstrating excellent sensing performance for large-scale movements of the human body. It is anticipated that these ion-conducting elastomers will find promising applications in flexible and wearable electronics.

Electrochemical sensor for effective detection of methyl parathion applying multidimensional MXene/CNHs/PPy nanocomposite to synergistically immobilize acetylcholinesterase.

In this study, a novel acetylcholinesterase (AChE)-based electrochemical sensor was successfully constructed using two-dimensional MXene, carbon nanohorns (CNHs) and polypyrrole (PPy) as the substrate material for the detection of methyl parathion (MP) residue. The multidimensional MXene/CNHs composite, formed through electrostatic self-assembly, provided a high specific surface area and excellent conductivity. With an active surface area of 0.1062 cm2, the composite provided numerous electroactive sites for AChE immobilization and facilitated electron diffusion at the sensing interface, amplifying the electrochemical signals. Additionally, polypyrrole (PPy) improved AChE adhesion on the electrode surface, further enhancing the stability of the sensor. The proposed sensor exhibited a wide linear range (0.002-346 ng mL-1) and low detection limit (0.00021 ng mL-1) for MP. This study offers an innovative strategy to detect MP, showcasing the potential of two-dimensional materials in electrochemical sensing.

Molecular Interaction Mechanisms Between Lubricant-Infused Slippery Surfaces and Mussel-Inspired Polydopamine Adhesive and DOPA Moiety.

Lubricant-infused slippery surfaces have recently emerged as promising antifouling coatings, showing potential against proteins, cells, and marine mussels. However, a comprehensive understanding of the molecular binding behaviors and interaction strength of foulants to these surfaces is lacking. In this work, mussel-inspired chemistry based on catechol-containing chemicals including 3,4-dihydroxyphenylalanine (DOPA) and polydopamine (PDA) is employed to investigate the antifouling performance and repellence mechanisms of fluorinated-based slippery surface, and the correlated interaction mechanisms are probed using atomic force microscopy (AFM). Intermolecular force measurements and deposition experiments between PDA and the surface reveal the ability of lubricant film to inhibit the contact of PDA particles with the substrate. Moreover, the binding mechanisms and bond dissociation energy between a single DOPA moiety and the lubricant-infused slippery surface are quantitatively investigated employing single-molecule force spectroscopy based on AFM (SM-AFM), which reveal that the infused lubricant layer can remarkably influence the dissociation forces and weaken the binding strength between DOPA and underneath per-fluorinated monolayer surface. This work provides new nanomechanical insights into the fundamental antifouling mechanisms of the lubricant-infused slippery surfaces against mussel-derived adhesive chemicals, with important implications for the design of lubricant-infused materials and other novel antifouling platforms for various bioengineering and engineering applications.

Dual biomass-derived porous carbon heterogeneous functionalized mesoporous CuCo2O4 nanocomposite combined with molecularly imprinted polymers as an electrochemical sensing platform for hypersensitive and selective determination of dimetridazole contaminants.

In this study, an original molecularly imprinted electrochemical sensor (MIECS) is prepared using layer-by-layer modification of sensitization nanomaterials (CuCo2O4/BPC-E) coupled with molecularly imprinted polymers (MIPs) for the ultrasensitive and rapid determination of dimetridazole (DMZ) contaminants. The biomass waste of eggshell (ES) powders subtly introduced in situ in the carbonization process of psyllium husk (PSH) substantially promotes the physicochemical properties of the resulting biomass-derived porous carbon (BPC-E). The large specific surface area and abundant pores provide a favourable surface for loading mesoporous CuCo2O4 with a spinel structure. The assembly of CuCo2O4/BPC-E on the gold electrode (GE) surface enhances the electrochemical sensing signal. The MIPs constructed using DMZ and o-phenylenediamine (oPD) as templates and functional monomers boost the targeted recognition performance of the analyte. The combined DMZ targets then undergo an electrochemical reduction reaction in situ with the transfer of four electrons and four protons. Under optimum conditions, the current response of differential pulse voltammetry (DPV) exhibits two linear ranges for DMZ detection, 0.01-10 µM and 10-200 µM. The limit of detection (LOD) is 1.8 nM (S/N = 3) with a sensitivity of 5.724 µA µM-1 cm-2. The obtained MIECS exhibits excellent selectivity, reproducibility, repeatability and stability. This electrochemical sensing system is applied to the detection of real samples (tap water, coarse fodder and swine urine), yielding satisfactory recoveries (90.6%-98.1 %), which are consistent with those obtained via HPLC. This finding verifies that the utility of MIECS for monitoring pharmaceutical and environmental contaminants and ensuring food safety.

Plasmon AgNPs/MoS2/ZnO nanorods array ternary heterojunctions enabling high-efficiency solar-light energy utilization for photocatalysis and recyclable SERS detection.

BACKGROUND: Surface-enhanced Raman scattering (SERS) has gained widespread use in molecule-level detection benefiting from its high sensitivity, nondestructive data acquisition, and capacity for providing molecular fingerprint information. However, the strong adhesion of target molecules to the substrate (known as the "memory effect") inherently hinders the reusability of SERS substrates. Research has shown that self-cleaning SERS substrates based on versatile semiconductor materials with SERS enhancement capabilities and solar photocatalytic properties offer an effective platform for the sensitive detection and degradation of harmful molecules. RESULTS: In this research, a resuable SERS-active substrate was facilely fabricated by anchoring silver nanoparticles (AgNPs) to the edges of MoS2 nanosheet decorated on ZnO nanorod arrays (NRAs). This innovative design exhibited a remarkable SERS enhancement factor (EF) of 4.6 × 107 and demonstrated significant solar photocatalytic efficiency. Such superior characteristics of ternary plasma heterojunction were ascribable to the synergistic effect of the "Schottky barrier" and "hot spots" between MoS2 and AgNPs, the inherent chemical enhancement proficiency of the MoS2/ZnO NRAs heterojunction, as well as the ultrafast electron transfer within the ternary heterojunction. SIGNIFICANCE: The developed ternary heterojunction substrate enabled highly sensitive SERS detection of trace amounts of organic molecules. Moreover, this SERS substrate exhibited self-cleaning and recyclability via solar-light-driven photocatalysis. This bifunctional recyclable SERS substrate proved capable of meeting various requirements for routine monitoring of environmental organic pollutants and provided a robust avenue for advancing energy utilization materials that serve as high-performance SERS sensors and catalysts.

Fluorescent solid-state strips based on SiO2 shell-stabilized perovskite nanocrystals applying for magnetic aptasensing detection of aflatoxin B1 toxin in food.

In this work, the perovskite fluorescent nanocrystals (CsPbBr3) were successfully synthesized and wrapped with SiO2 shell, utilized for the assembly of solid-state detection strip capable of conveniently and specifically detection of aflatoxin B1 (AFB1). The SiO2 coating aimed to enhance the stability of CsPbBr3 nanocrystals. The resulting CsPbBr3@SiO2 material exhibited remarkable fluorescence properties, and further self-assembled onto solid-state plate, generating AFB1-specific quenched fluorescence at a specific wavelength of 515 nm. When combined with the capture of AFB1 by magnetic nanoparticles conjugated with aptamers (MNPs-Apt), it was achieved the good separation and specific detection of AFB1 toxin in food matrices. The constructed fluorescent solid-state detection strip based on CsPbBr3@SiO2 exhibited good response to AFB1 toxin within a linear range of 0.1-100 ng mL-1 and an impressive detection limit as low as 0.053 ng mL-1. This presents a new strategy for the rapid screening and convenient detection of highly toxic AFB1.

Interfacial Hydrogen Bond-Reinforced Adhesion and Cohesion Enabling an Ultrastretchable and Wet Adhesive Hydrogel Strain Sensor.

Historically, research on silicotungstic-acid-based hydrogels has primarily focused on their adhesive properties, often at the expense of mechanical strength (cohesion). In this study, we present a novel approach to fabricate a polysaccharide hydrogel that harmoniously balances both adhesion and cohesion via interfacial hydrogen bonds. This hydrogel, composed of carboxymethyl cellulose (CMC), polyacrylamide (PAM), silicotungstic acid (SiW), and lithium chloride (LiCl), showcases a unique combination of properties: strain-responsive ionic conductivity, superior transparency, remarkable stretchability, and robust adhesion. Contrary to conventional PAM hydrogels, our PAM-SiW networked hydrogel addresses the common challenge of achieving good adhesion without compromising on cohesion. Specifically, our hydrogel demonstrates a maximum toughness of 20.3 MJ/m3 and a strain of 4079%, an accomplishment rarely observed in other adhesive hydrogel. Furthermore, the hydrogel's adhesion is both reversible and versatile, adhering effectively to a variety of wet and dry substrates. This makes it a promising candidate for advanced healthcare applications, particularly as a mechanically reinforced underwater adhesive with unparalleled stability. We also provide insights into the role of LiCl in the hydrogel matrix, emphasizing its influence on electrostatic interactions without affecting the hydrogen bonds. This study serves as a testament to the potential of harmonizing adhesive and cohesive properties in hydrogels, paving the way for future innovations in the field.

Microfluidic paper-based analysis device applying black phosphorus nanosheets@MWCNTs-COOH: A portable and efficient strategy for detection of ß-Lactoglobulin in dairy products.

This study prepared a novel, portable and cost-effective microfluidic paper-based electrochemical analysis device (µ-PAD) using black phosphorus nanosheets@carboxylated multi-walled carbon nanotubes (BPNSs@MWCNTs-COOH) nanocomposites for ß-lactoglobulin (ß-LG) detection. At the appreciate ratio, the synthesized BPNSs@MWCNTs-COOH was demonstrated to not only serve as a high-quality substrate for the specific aptamer immobilization, but also improve the electron transfer capability of the sensing interface. The µ-PADs, utilizing BPNSs@MWCNTs-COOH and aptamer recognition, exhibited a wider detection range (10-1000 ng mL-1) and lower detection limit (LOD: 0.12 ng mL-1) for ß-LG, and demonstrated enhanced specificity, satisfactory anti-interference ability and stability. When applied to the ß-LG determination in dairy samples, the µ-PAD yielded ß-LG concentrations highly correlated with those obtained using the HPLC method (R2: 0.9982). These results emphasized the reliable performance of the developed µ-PADs in ß-LG allergen quantification, highlighting their potential as an efficient platform for the rapid screening of ß-LG allergens.

Bimetallic Ag/Au nanoclusters encapsulated in ZIF-8 framework: A novel strategy for ratiometric fluorescence detection of doxycycline in food.

This study successfully encapsulated the Ag+-doped Au nanoclusters (Ag/AuNCs) within the ZIF-8 framework to construct a novel Ag/AuNCs@ZIF-8 ratiometric fluorescent probe for the antibiotic doxycycline (DOX) detection. The incorporation of Ag+ contributed to the fluorescence enhancement of the nanoclusters through the "silver effect", consequently improving the stability of the developed bimetallic Ag/AuNCs. Furthermore, the encapsulation of bimetallic Ag/AuNCs within the ZIF-8 framework restricted their intramolecular vibrations, resulting in further amplification of fluorescence intensity at 595 nm. The ZIF-8 also sensitized the restoration of DOX green fluorescence at 515 nm. Within the concentration range of 0.001-20 µg mL-1, the ratio of fluorescence intensity (F515/F595) exhibited a favorable linearity for DOX concentration, with a detection limit of 36.8 ng mL-1. This ratiometric fluorescence approach had the promising potential for accurate and efficient quantitative detection of DOX residue in food and served as a valuable reference for rapid monitoring of food contaminants.

Nanomaterial-Based Optical Detection of Food Contaminants.

The presence of food contaminants remains a significant aspect contributing to global food safety issues, drawing widespread attention from ordinary consumers, governments, and researchers [...].

A Self-Homing and Traceable Cardiac Patch Leveraging Ferumoxytol for Spatiotemporal Therapeutic Delivery.

Mesenchymal stem cell (MSC)-based cardiac patches are envisioned to be a promising treatment option for patients with myocardial infarction. However, their therapeutic efficacy and duration are hampered due to their limited retention on the epicardium. We engineered a scaffold-free MSC sheet with an inherent ability to migrate into the infarcted myocardium, a strategy enabled by actively establishing a sustained intracellular hypoxic environment through the endocytosis of our FDA-approved ferumoxytol. This iron oxide nanoparticle stabilized hypoxia-induced factor-1α, triggering upregulation of the CXC chemokine receptor and subsequent MSC chemotaxis. Thus, MSCs integrated into 2/3 depth of the left ventricular anterior wall in a rat model of acute myocardial infarction and persisted for at least 28 days. This led to spatiotemporal delivery of paracrine factors by MSCs, enhancing cardiac regeneration and function. Ferumoxytol also facilitated the noninvasive MRI tracking of implanted MSCs. Our approach introduces a strategy for mobilizing MSC migration, holding promise for rapid clinical translation in myocardial infarction treatment.

Carbon-dots encapsulated luminescent metal-organic frameworks@surface molecularly imprinted polymer: A facile fluorescent probe for the determination of chloramphenicol.

In this study, carbon dots (CDs)-encapsulated luminescent metal-organic frameworks@surface molecularly imprinted polymer (CDs@MOF@SMIP) was facilely prepared and applied as fluorescent probe for specific identification and sensitive detection of chloramphenicol (CAP) in food. Fluorescent CDs, serving as signal tags, were encapsulated within metal-organic backbones (ZIF-8), yielding luminescent MOF materials (CDs@ZIF-8). The synthesized CDs, CDs@ZIF-8 and CDs@ZIF-8@SMIP were investigated by morphological and structural characterizations (UV-Vis, XRD, FT-IR, BET, TEM). The CDs@ZIF-8@SMIP probe was demonstrated to have remarkable selectivity and sensitivity towards CAP. Its fluorescence decreased linearly with CAP concentration from 0.323 µg L-1 (0.001 µM) to 8075.0 µg L-1 (25.0 µM), featuring a low detection limit of 0.08 µg L-1. The CDs@ZIF-8@SMIP-based fluorescence strategy achieved satisfactory recoveries (95.5 % - 101.0 %) in CAP-spiked commercial foods with RSD < 4.4 % (n = 3). These results indicate that this method can effectively detect trace CAP in food matrices and has broad application prospects.

Computational simulation-assisted design and experimental verification of molecularly imprinted polymers for selective extraction of chlorogenic acid.

Chlorogenic acid (CGA) is an active ingredient in honeysuckle with a broad-spectrum of antibacterial activity, suppressing tumor growth and other pharmacological effects. However, it is susceptible to damage during traditional extraction and separation processes. Therefore, developing selective and efficient extraction methods of CGA is essential. Based on computational molecular simulations, a reliable and efficient molecularly imprinted polymers (MIPs) were successfully developed for selective extraction of CGA. MIPs and non-molecularly imprinted polymers (NIPs) were synthesized using a precipitation polymerization method, employing three different functional monomers: [methacrylic acid (MAA), 4-vinylpyridine (4-VP), and methyl methacrylate (MMA)], with CGA serving as the template molecule. To simulate the polymers and predict the optimal ratio between the template and functional monomer, the computational studies and adsorption performance experiments were carried out. The adsorption characteristics and thermal stability of polymers were evaluated by isothermal adsorption, adsorption kinetics, selective adsorption and thermogravimetric analysis, aiming to obtain the MIPs with specific recognition and selectivity for CGA. When the molar ratio of template CGA to functional monomer 4-VP was 1:8, the prepared MIPs was found to have the maximum adsorption capacity (14.85 mg g-1) and the highest imprinting factor (1.74) at the CGA concentration of 100 mg L-1. These results were consistent with those obtained by computational molecular simulation. This study not only provides good guidance for developing separation materials for extracting CGA from natural plants but also inspires the application of computer simulation and molecular docking techniques in the preparation of specific MIPs materials.

Nanoscale Materials Applying for the Detection of Mycotoxins in Foods.

Trace amounts of mycotoxins in food matrices have caused a very serious problem of food safety and have attracted widespread attention. Developing accurate, sensitive, rapid mycotoxin detection and control strategies adapted to the complex matrices of food is crucial for in safeguarding public health. With the continuous development of nanotechnology and materials science, various nanoscale materials have been developed for the purification of complex food matrices or for providing response signals to achieve the accurate and rapid detection of various mycotoxins in food products. This article reviews and summarizes recent research (from 2018 to 2023) on new strategies and methods for the accurate or rapid detection of mold toxins in food samples using nanoscale materials. It places particular emphasis on outlining the characteristics of various nanoscale or nanostructural materials and their roles in the process of detecting mycotoxins. The aim of this paper is to promote the in-depth research and application of various nanoscale or structured materials and to provide guidance and reference for the development of strategies for the detection and control of mycotoxin contamination in complex matrices of food.

Bioinspired engineered proteins enable universal anchoring strategy for surface functionalization.

HYPOTHESIS: Conventional coating strategies and materials for bio-applications with protective, diagnostic, and therapeutic functions are commonly limited by their arduous preparation processes and lack of on-demand functionalities. Herein, inspired by the 'root-leaf' structure of grass, a series of novel polyacrylate-conjugated proteins can be engineered with sticky bovine serum albumin (BSA) protein as a 'root' anchoring layer and a multifunctional polyacrylate as a 'leaf' functional layer for the facile coating procedure and versatile surface functionalities. EXPERIMENTS: The engineered proteins were synthesized based on click chemistry, where the 'root' layer can universally anchor onto both organic and inorganic substrates through a facile dip/spraying method with excellent stability in harsh solution conditions, thanks to its multiple adaptive molecular interactions with substrates that further elucidated by molecular force measurements between the 'root' BSA protein and substrates. The 'leaf' conjugated-polyacrylates imparted coatings with versatile on-demand functionalities, such as resistance to over 99% biofouling in complex biofluids, pH-responsive performance, and robust adhesion with various nanomaterials. FINDINGS: By synergistically leveraging the universal anchoring capabilities of BSA with the versatile physicochemical properties of polyacrylates, this study introduces a promising and facile strategy for imparting novel functionalities to a myriad of surfaces through engineering natural proteins and biomaterials for biotechnical and nanotechnical applications.

Nanomaterial-based magnetic surface molecularly imprinted polymers for specific extraction and efficient recognition of dibutyl phthalate.

A rapid and selective sorbent for the enrichment of dibutyl phthalate (DBP) from water and Chinese Baijiu samples was established using magnetic surface molecularly imprinted polymers (MSMIPs) combined with gas chromatography-mass spectrometer (GC-MS). The MSMIPs were synthesized using a magnetic nanosphere material with silica layer, increasing the polymer surface area as a carrier. Compared with the traditional methods, the addition of magnetic microspheres simplified the process of food substrate purification and significantly shortened the pre-concentration time. The MSMIPs adsorption conforms to the Freundlich isotherm model as multilayer adsorption on an inhomogeneous surface and the pseudo-second-order model. The developed MSMIPs combined with GC-MS method showed good linearity in DBP concentration range of 0.02-1.0 mg L-1 with low LOD (0.0054 mg L-1) and LOQ (0.018 mg L-1), and obtained good recoveries in real samples (95.2-97.2%) with RSD < 5.0% (n = 9), which were consistent with those from Chinese national standard method.

Review: Synthesis of metal organic framework-based composites for application as immunosensors in food safety.

Ensuring food safety continues to be one of the major global challenges. For effective food safety monitoring, fast, sensitive, portable, and efficient food safety detection strategies must be devised. Metal organic frameworks (MOFs) are porous crystalline materials that have attracted attention for use in high-performance sensors for food safety detection owing to their advantages such as high porosity, large specific surface area, adjustable structure, and easy surface functional modification. Immunoassay strategies based on antigen-antibody specific binding are one of the important means for accurate and rapid detection of trace contaminants in food. Emerging MOFs and their composites with excellent properties are being synthesized, providing new ideas for immunoassays. This article summarizes the synthesis strategies of MOFs and MOF-based composites and their applications in the immunoassays of food contaminants. The challenges and prospects of the preparation and immunoassay applications of MOF-based composites are also presented. The findings of this study will contribute to the development and application of novel MOF-based composites with excellent properties and provide insights into advanced and efficient strategies for developing immunoassays.

Fluorescent and Colorimetric Dual-Mode Strategy Based on Rhodamine 6G Hydrazide for Qualitative and Quantitative Detection of Hg2+ in Seafoods.

In this study, a rapid fluorescent and colorimetric dual-mode detection strategy for Hg2+ in seafoods was developed based on the cyclic binding of the organic fluorescent dye rhodamine 6G hydrazide (R6GH) to Hg2+. The luminescence properties of the fluorescent R6GH probe in different systems were investigated in detail. Based on the UV and fluorescence spectra, it was determined that the R6GH has good fluorescence intensity in acetonitrile and good selective recognition of Hg2+. Under optimal conditions, the R6GH fluorescent probe showed a good linear response to Hg2+ (R2 = 0.9888) in the range of 0-5 µM with a low detection limit of 2.5 × 10-2 µM (S/N = 3). A paper-based sensing strategy based on fluorescence and colorimetric analysis was developed for the visualization and semiquantitative analysis of Hg2+ in seafoods. The LAB values of the paper-based sensor impregnated with the R6GH probe solution showed good linearity (R2 = 0.9875) with Hg2+ concentration in the range of 0-50 µM, which means that the sensing paper can be combined with smart devices to provide reliable and efficient Hg2+ detection.

Bionic Engineered Protein Coating Boosting Anti-Biofouling in Complex Biological Fluids.

Implantable medical devices have been widely applied in diagnostics, therapeutics, organ restoration, and other biomedical areas, but often suffer from dysfunction and infections due to irreversible biofouling. Inspired by the self-defensive "vine-thorn" structure of climbing thorny plants, a zwitterion-conjugated protein is engineered via grafting sulfobetaine methacrylate (SBMA) segments on native bovine serum albumin (BSA) protein molecules for surface coating and antifouling applications in complex biological fluids. Unlike traditional synthetic polymers of which the coating operation requires arduous surface pretreatments, the engineered protein BSA@PSBMA (PolySBMA conjugated BSA) can achieve facile and surface-independent coating on various substrates through a simple dipping/spraying method. Interfacial molecular force measurements and adsorption tests demonstrate that the substrate-foulant attraction is significantly suppressed due to strong interfacial hydration and steric repulsion of the bionic structure of BSA@PSBMA, enabling coating surfaces to exhibit superior resistance to biofouling for a broad spectrum of species including proteins, metabolites, cells, and biofluids under various biological conditions. This work provides an innovative paradigm of using native proteins to generate engineered proteins with extraordinary antifouling capability and desired surface properties for bioengineering applications.