Solvation and expansion of neutral and charged chains of a carbohydrate polyelectrolyte: Galacturonan in water. A critical revisiting.

Experimental and theoretical data have been revisited to shed light onto the aspects of hydration and chain expansion of pectic acid (galacturonan) upon charging. The prediction of the variation of the number of solvation water molecules between the two limit ionization states from theoretical calculations was confirmed to a very high accuracy by the corresponding number evaluated form dilatometric measurements. The relevance of hydration to the mechanism of bonding of calcium ions by sodium pectate is discussed. Characterization of polymer expansion has been obtained by calculating the values of the characteristic ratio and/or the persistence length on the respective populations and comparing the theoretical predictions with experimental data. The results show that a charged chain in typical conditions of ionic strength is more expanded than its neutral counterpart, whereas the ideal limit (31 and 21) helical conformations in the uncharged and totally charged conditions, respectively, share the same value of the linear advance of the helical repeat, when the ionic strength tends to infinite. Total divergence between theoretical predictions and experimental evidence rules out the possibility that carboxylate charge reduction by protonation and by methyl esterification are equivalent in determining the solution behavior of galacturonan.

Comparative Insights into the Fundamental Steps Underlying Gelation of Plant and Algal Ionic Polysaccharides: Pectate and Alginate.

Pectate and alginate are among the most important biopolymers able to give rise to ionotropic gelation upon the addition of di- or multivalent counterions. The two ionic polysaccharides exhibit several common aspects of the gelation mechanism with calcium ions, the physiologically and commercially most relevant counterion type. The first one pertains to the role that specific Ca2+/polyion interactions play in the establishment of the ion-mediated chain/chain cross-links. Such interactions include both a specific affinity of the territorially condensed Ca2+ counterions for the polyuronate(s) and the formation of long-lasting chemical bonding (inner ion-sphere complex) of specific interchain sites accompanied by high conformational ordering. As to the first mechanism, it is dominated by the strong desolvation of the interacting ionic species, with concomitant positive variations in both enthalpy and entropy, the contribution of the latter prevailing over the former due to the favorable liberation of a very large number of water molecules of hydration. Both dilatometric and microcalorimetric data point to the higher affinity of Ca2+ for pectate than for alginate. The selective accumulation of calcium ions close to the polyanion(s) favors the onset of the second-chemical bonding-mode, which is associated with charge neutralization at the bonding site. This mode coincides with the largely accepted "egg-box" model for the calcium-mediated interchain junction of pectate and alginate. A new approach was devised for the calculation of the fraction of chemically bound divalent ions; it was based on the available circular dichroism data (further supported by scattering and viscosity results) and successfully tested by comparison with an independently determined fraction in the case of pectate. In detail, the strong bonding mode manifests in two sequential bonding modes. The first one (at low concentrations of added Ca2+ ions) entails a cross-link in which only one calcium ions is bracketed in a "twisted" egg-box between two chains; upon further counterion addition, a series of nearest-neighboring "perfect" egg-box structures develops. Both dilatometric and microcalorimetric changes associated with the latter chemical bonding modes are quantitatively larger for pectate than for alginate; clearly the latter polyuronate suffers from the relevant presence of the weakly calcium-binding mannuronic acid repeating units. Light-scattering experiments provided a clear-cut demonstration of the intermolecular bonding of calcium ions from the very beginning of the linker addition.

On the Molecular Mechanism of the Calcium-Induced Gelation of Pectate. Different Steps in the Binding of Calcium Ions by Pectate.

Pectic acid/sodium pectate is one of the most widespread hydrocolloid used in the food industry. It is able to form strong ionotropic gels by the addition of ions, in particular, calcium ions. The initial steps of binding Ca2+ ions to a sample of sodium pectate with a composition close to 90% of ideal Na+-poly(galacturonate) were investigated by means of circular dichroism (CD), microcalorimetry, dilatometry, viscosity, and membrane osmometry, as a function of increasing Rj, Rj being the ratio of the molar concentrations of Ca2+ and pectate repeating units. Data were collected in aqueous NaClO4 at 25 °C. The key instrument of interpretation has been the counterion condensation theory (CCT) of linear polyelectrolytes, modified to include the presence of both specific affinity of the divalent counterion for the polysaccharide ("territorial binding"), and, very importantly, strong chemical bonding (not a covalent bonding, though) of Ca2+ on conformationally well-defined sites on the polymer, with local charge annihilation. Intrinsic viscosity and number-average molar mass data as a function of Rj showed that calcium bonding brings about chain association right from the beginning of addition to pectate. The analysis of the microcalorimetric curve using the modified CCT revealed two types of bonding. In the order of development as a function of Rj, the first mode (type 1) could be reconciled with the "tilted egg-box" type, recently proposed for Ca2+ binding to alginate and the second mode (type 2) with the "shifted egg-box" proposed for calcium pectate on the basis of conformational analysis investigation. Likewise, the two types of bonding turned out to be superimposable with similar bonding categories proposed for alginate and low-methoxyl pectin (LMP), on the one side, and for the association of semiflexible polyelectrolytes, on the other. The analysis allowed us to obtain standard Gibbs free energy, enthalpy, entropy, and volume molar values both for the affinity and the chemical bonding processes. Interestingly, the analysis of the dependence of the gelation temperatures, Tg, of LMP upon increasing additions of calcium ions provided the values of Tg and standard Gibbs free-energy of calcium-to-pectate association coinciding with those obtained from calorimetry for the type-2 bonding process. This finding corroborated previously reported evidence on the enthalpic nature of the elasticity of Ca2+-pectate gels. Finally, comparative analysis of different techniques, but of CD in particular, enabled proposing a "loose-21-helix" as the starting conformation of sodium pectate in aqueous solution.

pH-Assisted Gelation of Lactose-Modified Chitosan.

We report on a controlled process allowing for the gelation of a diol-rich chitosan-derivative named CTL (lactose-modified chitosan) in the presence of boric acid as the cross-linker. A two-step approach is described, namely (i) the mixing of CTL and boric acid at pH = 5, a condition where the inorganic component is mildly reactive; (ii) the addition of sodium bicarbonate (NaHCO3) as a trigger, allowing for the gradual and slow pH increase. The goal was to convert gradually the almost inert neutral boric acid into the much more reactive borate anion, the latter promoting the formation of borate esters with CTL diols. Gelling kinetics as well as mechanical behavior at small and large deformations was investigated by rheometry. CTL-boric acid gels behaved essentially as transient networks, hence continuously assembling and dissociating in a highly dynamic fashion. The present gelling mechanism preserves the strain-hardening behavior in the nonlinear region of stress-strain response, corroborating the already suggested potential applications of such gels as mimics of biological soft tissues.

Chitosan Acetylation Degree Influences the Physical Properties of Polysaccharide Nanoparticles: Implication for the Innate Immune Cells Response.

The aim of the present contribution is twofold as it reports (i) on the role played by chitosan acetylation degree for the stability of nanoparticles (NPs) formed with hyaluronan and (ii) on the effect of the interaction of such NPs with immune cells. Chitosans with similar viscosity-average molecular weight, [Formula: see text], (i.e., 200 000) and different fractions of acetylated units ( FA) together with low-molecular-weight hyaluronan were chosen for developing a select library of formulations via electrostatic complex coacervation. The resulting NPs were analyzed in terms of size, polydispersity, surface charge, and stability in physiological-mimicked media by dynamic light scattering. Only medium acetylated chitosan ( FA = 0.16) guaranteed the stability of NPs. To explore the effect of NPs interaction with immune cells, the release of proinflammatory cytokines and the reactive oxygen species production by human macrophages and neutrophils, respectively, were evaluated. Strikingly, a structure-function relationship emerged, showing that NPs made of chitosans with FA = 0.02, 0.25, 0.46, and 0.63 manifested a proinflammatory activity, linked to the instability of the system. Conversely, NPs made of chitosan with FA = 0.16 neither modified the functional response of macrophages nor that of neutrophils. Of note, such NPs were found to possess additional properties potentially advantageous in applications such as delivery of therapeutics to target inflamed sites: (i) they are devoid of cytotoxic effects, (ii) they avoid engulfment during the early stage of interaction with macrophages, and (iii) they are muco-adhesive, thereby providing for site-specificity and long-residence effects.

Nucleation, reorganization and disassembly of an active network from lactose-modified chitosan mimicking biological matrices.

Developing synthetic materials able to mimic micro- and macrorheological properties of natural networks opens up to novel applications and concepts in materials science. The present contribution describes an active network based on a semi-synthetic polymer, a lactitol-bearing chitosan derivative (Chitlac), and a transient inorganic cross-linker, boric acid. Due to the many and diverse anchoring points for boric acid on the flanking groups of Chitlac, the cross-links constantly break and reform in a highly dynamic fashion. The consequence is a network with unusual non-equilibrium and mechanical properties closely resembling the rheological behavior of natural three-dimensional arrangements and of cytoskeleton. Concepts like network nucleation, reorganization and disassembly are declined in terms of amount of the cross-linker, which acts as a putative motor for remodeling of the network upon application of energy. The out-of-equilibrium and non-linear behavior render the semi-synthetic system of great interest for tissue engineering and for developing in-vitro mimics of natural active matrices.

Biomimetic, Multiresponsive, and Self-Healing Lactose-Modified Chitosan (CTL)-Based Gels Formed via Competitor-Assisted Mechanism.

The present paper describes an original method to form under physiological conditions homogeneous lactose-modified chitosan (CTL) gels avoiding syneresis. Specifically, combination of boric acid-i.e., the cross-linker-and mannitol-i.e., a polyol competitor for boron binding-were exploited to reduce the very fast kinetics of CTL/boron self-assembly. Resulting gels were homogeneous as proved by scattering analyses. An in-depth rheological characterization was undertaken to identify the correct mannitol-to-boron ratio at which gels showed homogeneity without weakening. Stress sweep and frequency sweep tests were performed to investigate the viscoelastic properties of these dynamic networks, highlighting a marked strain-hardening behavior, which is pivotal in native tissues. Notably, herein we report for the first time that CTL-boric acid gels are multiresponsive systems, whose mechanics can be tailored by different stimuli such as the presence of small molecules like glucose. Moreover, we demonstrate that these networks spontaneously self-heal after breakage. The biocompatibility of such gels was studied under 2D and 3D conditions toward three different cell models, namely, pig primary chondrocytes, human Dental Pulp Stem Cells (hDPSCs), and mouse fibroblasts. Giving the peculiar mechanical performance of selected systems and considering the well-known bioactivity of the chitosan derivative, CTL-boric acid networks are promising candidates as multiresponsive gels to be used in the field of tissue engineering, especially for articular cartilage regeneration.

Complex Coacervates between a Lactose-Modified Chitosan and Hyaluronic Acid as Radical-Scavenging Drug Carriers.

Complex coacervation of two oppositely charged polysaccharides, namely a lactose-modified chitosan (CTL) and hyaluronan (HA), was investigated in this study. Coacervates of the two polysaccharides were prepared by drop-by-drop injection of HA into CTL. Transmittance and dynamic light scattering (DLS) measurements in combination with TEM analyses demonstrated the formation of spheroidal colloids in the nano-/microsize range showing good homogeneity. Strikingly, the presence of 150 mM supporting NaCl did not hamper the colloid formation. Stability studies on selected formulations demonstrated that HA/CTL coacervates were stable up to 3 weeks at 37 °C and behaved as pH-responsive colloids since transition from entangled to disentangled chains was attained for a proper pH range. The possibility of freeze-drying the coacervates for storage purposes and the ability of encapsulating selected payloads were investigated as well, for two values of the fraction of the lactitol side-chain substitution (FL). Finally, biological tests using human neutrophils were undertaken at acidic pH value (pH = 6.0): under such experimental conditions, akin to those frequently occurring in the inflammatory microenvironment, coacervates scavenged reactive oxygen species (ROS) generated by these cells in basal conditions. Given the well documented bioactivity of CTL with respect to chitosan toward cartilage regeneration, these findings point to a possible application of HA/CTL-based colloids as scavenging and bioactive carriers for the delivery of therapeutic molecules at confined inflamed sites such as knee joints.

The role played by the molecular weight and acetylation degree in modulating the stiffness and elasticity of chitosan gels.

A broad library of chitosans was produced varying the molecular weight and the fraction of acetylated units, FA. The produced chitosans were used for the formation of wall-to-wall cylindrical gels through a controlled external gelation using tripolyphosphate (TPP) as cross-linker. The resulting gels were analyzed by rheometry. Viscosity average degree of polymerization (DPv¯) > 152 was shown to be required for the formation of stable gels. Both gel stiffness and gel rupture strength were proportional to the molecular weight regardless of the applied deformation. Increasing acetylation produced a marked reduction of the shear modulus, but, in parallel, switched the networks from rigid and brittle to weak and elastic. Intriguingly, gels made of chitosan with FA = 0.37 displayed notable elasticity, i.e. up to 90% of applied strain falls into linear regime. These findings suggest that the frequency of glucosamine (D unit) and N-acetyl-glucosamine (A unit) contribute to a subtle structure-property relationship in chitosan-TPP gels.

Dissecting the conformational determinants of chitosan and chitlac oligomers.

Chitosan and its highly hydrophilic 1-deoxy-lactit-1-yl derivative (Chitlac) are polysaccharides with increasing biomedical applications. Aimed to unravel their conformational properties we have performed a series of molecular dynamics simulations of Chitosan/Chitlac decamers, exploring different degrees of substitution (DS) of lactitol side chains. At low DS, two conformational regions with different populations are visited, while for DS ≥ 20% the oligomers remain mostly linear and only one main region of the glycosidic angles is sampled. These conformers are (locally) characterized by extended helical "propensities". Helical conformations 32 and 21, by far the most abundant, only develop in the main region. The accessible conformational space is clearly enlarged at high ionic strength, evidencing also a new region accessible to the glycosidic angles, with short and frequent interchange between regions. Simulations of neutral decamers share these features, pointing to a central role of electrostatic repulsion between charged moieties. These interactions seem to determine the conformational behavior of the chitosan backbone, with no evident influence of H-bond interactions. Finally, it is also shown that increasing temperature only slightly enlarges the available conformational space, but certainly without signs of a temperature-induced conformational transition.

Exploiting natural polysaccharides to enhance in vitro bio-constructs of primary neurons and progenitor cells.

Current strategies in Central Nervous System (CNS) repair focus on the engineering of artificial scaffolds for guiding and promoting neuronal tissue regrowth. Ideally, one should combine such synthetic structures with stem cell therapies, encapsulating progenitor cells and instructing their differentiation and growth. We used developments in the design, synthesis, and characterization of polysaccharide-based bioactive polymeric materials for testing the ideal composite supporting neuronal network growth, synapse formation and stem cell differentiation into neurons and motor neurons. Moreover, we investigated the feasibility of combining these approaches with engineered mesenchymal stem cells able to release neurotrophic factors. We show here that composite bio-constructs made of Chitlac, a Chitosan derivative, favor hippocampal neuronal growth, synapse formation and the differentiation of progenitors into the proper neuronal lineage, that can be improved by local and continuous delivery of neurotrophins. STATEMENT OF SIGNIFICANCE: In our work, we characterized polysaccharide-based bioactive platforms as biocompatible materials for nerve tissue engineering. We show that Chitlac-thick substrates are able to promote neuronal growth, differentiation, maturation and formation of active synapses. These observations support this new material as a promising candidate for the development of complex bio-constructs promoting central nervous system regeneration. Our novel findings sustain the exploitation of polysaccharide-based scaffolds able to favour neuronal network reconstruction. Our study shows that Chitlac-thick may be an ideal candidate for the design of biomaterial scaffolds enriched with stem cell therapies as an innovative approach for central nervous system repair.

On the Correlation between the Microscopic Structure and Properties of Phosphate-Cross-Linked Chitosan Gels.

Ionic chitosan gels fabricated using multivalent anions, tripolyphosphate (TPP) or pyrophosphate (PPi), respectively, have been investigated as potential biomaterials to be used in tissue engineering. Starting from the hypothesis that the polymer mesh texture at the microscale affects the final performance of the resulting materials, an innovative image analysis approach is presented in the first part of the article, which is aimed at deriving quantitative information from transmission electron microscopy images. The image analysis of the (more extended) central area of the gel networks revealed differences between both the cross-linking densities and pore size distributions of the two systems, the TPP gels showing a higher connectivity. Chitosan-TPP gels showed a limited degradation in simulated physiological media up to 6 weeks, reasonably ascribed to the texture of the (more extended) central area of the gels, whereas PPi counterparts degraded almost immediately. The release profiles and the calculation of diffusion coefficients for bovine serum albumin and cytochrome c, herein used as model payloads, indicated a different release behavior depending on the polymer network homogeneity/inhomogeneity and molecular weight of loaded molecules. This finding was ascribed to the marked inhomogeneity of the PPi gels (at variance with the TPP ones), which had been demonstrated in our previous work. Finally, thorough in vitro studies demonstrated good biocompatibility of both chitosan gels, and because of this feature, they can be used as suitable scaffolds for cellular colonization and metabolic activity.

Alginate membranes loaded with hyaluronic acid and silver nanoparticles to foster tissue healing and to control bacterial contamination of non-healing wounds.

Chronic non-healing wounds are a clinically important problem in terms of number of patients and costs. Wound dressings such as hydrogels, hydrocolloids, polyurethane films and foams are commonly used to manage these wounds since they tend to maintain a moist environment which is shown to accelerate re-epithelialization. The use of antibacterial compounds is important in the management of wound infections. A novel wound-dressing material based on a blended matrix of the polysaccharides alginate, hyaluronic acid and Chitlac-silver nanoparticles is here proposed and its application for wound healing is examined. The manufacturing approach to obtain membranes is based on gelling, foaming and freeze-casting of alginate, hyaluronic acid and Chitlac-silver nanoparticles mixtures using calcium ions as the cross-linking agent. Comprehensive evaluations of the morphology, swelling kinetics, permeability, mechanical characteristics, cytotoxicity, capability to inhibit metalloproteinases and of antibacterial property were conducted. Biological in vitro studies demonstrated that hyaluronic acid released by the membrane is able to stimulate the wound healing meanwhile the metal silver exploits an efficient antibacterial activity against both planktonic bacteria and biofilms. Overall, the experimental data evidence that the studied material could be used as antibacterial wound dressing for wound healing promotion.

Mimicking mechanical response of natural tissues. Strain hardening induced by transient reticulation in lactose-modified chitosan (chitlac).

The effect of transient cross-links has been explored on a lactose-modified chitosan, which previously had shown interesting biological features. The presence of galactose side chains and of the polyol spacer resulted particularly appealing for the reticulation by borate ions. The interaction between chitlac and borax was investigated by means of 11B NMR while rheology pointed to a marked non-linear behavior depending on the amount of borax added to the system. The presence of limited amount of cross-linking ion led to dilatant behavior when the steady flow curve was measured. In addition, strain stiffening was noticed on elastic response upon exceeding a critical stress, indicating a transient nature in the formation of the cross-links. The non-linear response of chitlac in the presence of borax compared surprisingly well with the one showed by proteins composing the natural ECM pointing at a possible role of mechanotransduction in the biological significance of the modified chitosan.

Antibacterial-nanocomposite bone filler based on silver nanoparticles and polysaccharides.

Injectable bone fillers represent an attractive strategy for the treatment of bone defects. These injectable materials should be biocompatible, capable of supporting cell growth and possibly able to exert antibacterial effects. In this work, nanocomposite microbeads based on alginate, chitlac, hydroxyapatite and silver nanoparticles were prepared and characterized. The dried microbeads displayed a rapid swelling in contact with simulated body fluid and maintained their integrity for more than 30 days. The evaluation of silver leakage from the microbeads showed that the antibacterial metal is slowly released in saline solution, with less than 6% of silver released after 1 week. Antibacterial tests proved that the microbeads displayed bactericidal effects toward Staphylococcus aureus, Pseudomonas aeruginosa and Staphylococcus epidermidis, and were also able to damage pre-formed bacterial biofilms. On the other hand, the microbeads did not exert any cytotoxic effect towards osteoblast-like cells. After characterization of the microbeads bioactivity, a possible means to embed them in a fluid medium was explored in order to obtain an injectable paste. Upon suspension of the particles in alginate solution or alginate/hyaluronic acid mixtures, a homogenous and time-stable paste was obtained. Mechanical tests enabled to quantify the extrusion forces from surgical syringes, pointing out the proper injectability of the material. This novel antibacterial bone filler appears as a promising material for the treatment of bone defects, in particular when possible infections could compromise the bone-healing process. Copyright © 2016 John Wiley & Sons, Ltd.

Concepts for Developing Physical Gels of Chitosan and of Chitosan Derivatives.

Chitosan macro- and micro/nano-gels have gained increasing attention in recent years, especially in the biomedical field, given the well-documented low toxicity, degradability, and non-immunogenicity of this unique biopolymer. In this review we aim at recapitulating the recent gelling concepts for developing chitosan-based physical gels. Specifically, we describe how nowadays it is relatively simple to prepare networks endowed with different sizes and shapes simply by exploiting physical interactions, namely (i) hydrophobic effects and hydrogen bonds-mostly governed by chitosan chemical composition-and (ii) electrostatic interactions, mainly ensured by physical/chemical chitosan features, such as the degree of acetylation and molecular weight, and external parameters, such as pH and ionic strength. Particular emphasis is dedicated to potential applications of this set of materials, especially in tissue engineering and drug delivery sectors. Lastly, we report on chitosan derivatives and their ability to form gels. Additionally, we discuss the recent findings on a lactose-modified chitosan named Chitlac, which has proved to form attractive gels both at the macro- and at the nano-scale.

Boric Acid Induced Transient Cross-Links in Lactose-Modified Chitosan (Chitlac).

The present paper explores the effect of boric acid on Chitlac, a lactose-modified chitosan which had previously shown interesting biological and physical-chemical features. The herewith-reported experimental evidences demonstrated that boric acid binds to Chitlac, producing conformational and association effects on the chitosan derivative. The thermodynamics of boric acid binding to Chitlac was explored by means of 11B NMR, circular dichroism (CD), and UV-vis spectroscopy, while macromolecular effects were investigated by means of viscometry and dynamic light scattering (DLS). The experimental results revealed a chain-chain association when limited amounts of boric acid were added to Chitlac. However, upon exceeding a critical boric acid limit dependent on the polysaccharide concentration, the soluble aggregates disentangle. The rheological behavior of Chitlac upon treatment with boric acid was explored showing a dilatant behavior in conditions of steady flow. An uncommonly high dependence in the scaling law between the zero-shear viscosity and the concentration of Chitlac was found, i.e., η0 ∝ CCTL5.8, pointing to interesting potential implications of the present system in biomaterials development.

Butyrate-Loaded Chitosan/Hyaluronan Nanoparticles: A Suitable Tool for Sustained Inhibition of ROS Release by Activated Neutrophils.

Tissue damage caused by excessive amounts of neutrophil-derived reactive oxygen species (ROS) occurs in many inflammatory diseases. Butyrate is a short-chain fatty acid (SCFA) with known anti-inflammatory properties, able to modulate several neutrophil functions. Evidence is provided here that butyrate inhibits neutrophil ROS release in a dose and time-dependent fashion. Given the short half-life of butyrate, chitosan/hyaluronan nanoparticles are next designed and developed as controlled release carriers able to provide cells with a long-lasting supply of this SCFA. Notably, while the inhibition of neutrophil ROS production by free butyrate declines over time, that of butyrate-loaded chitosan/hyaluronan nanoparticles (B-NPs) is sustained. Additional valuable features of these nanoparticles are inherent ROS scavenger activity, resistance to cell internalization, and mucoadhesiveness. B-NPs appear as promising tools to limit ROS-dependent tissue injury during inflammation. Particularly, by virtue of their mucoadhesiveness, B-NPs administered by enema can be effective in the treatment of inflammatory bowel diseases.

Highly monodisperse colloidal coacervates based on a bioactive lactose-modified chitosan: From synthesis to characterization.

The present contribution aims at describing the fabrication of coacervates in the nano-size range starting from a 1-deoxylactit-1-yl chitosan (in this manuscript termed as CTL60) and the multivalent anion tripolyphosphate (TPP). Colloidal coacervates have been obtained for precise values of the molar ratio of TPP to CTL60 repeating unit. Coacervation is ensured only at pH 4.5 and not at 7.4, thus demonstrating the key role of electrostatic interactions in the stabilization of the coacervates. At a variance with chitosan, CTL60 favors the formation of highly homogeneous coacervates with very low values of the polydispersity index (PDI). Moreover, CTL60 coacervates can be freeze-dried without any cryoprotectant, they can host a model molecule and are stable up to three weeks at 4°C. Conversely, such coacervates dissolve upon increasing pH and ionic strength. By considering the bioactive polycation CTL60, the present system can be suggested as a first step in the development of innovative biologically-active nano-carriers to be used as drug delivery systems.

Hydroxyapatite and bioactive glass surfaces for fiber reinforced composite implants via surface ablation by Excimer laser.

In skeletal reconstructions, composites, such as bisphenol-A-glycidyldimethacrylate resin reinforced with glass fibers, are potentially useful alternatives to metallic implants. Recently, we reported a novel method to prepare bioactive surfaces for these composites. Surface etching by Excimer laser was used to expose bioactive glass granules embedded in the resin. The purpose of this study was to analyze two types of bioactive surfaces created by this technique. The surfaces contained bioactive glass and hydroxyapatite granules. The selected processing parameters were adequate for the creation of the surfaces. However, the use of porous hydroxyapatite prevented the complete exposure the granules. In cell culture, for bioactive glass coatings, the pattern of proliferation of MG63 cells was comparable to that in the positive control group (Ti6Al4V) while inferior cell proliferation was observed on the surfaces containing hydroxyapatite granules. Scanning electron microscopy revealed osteointegration of implants with both types of surfaces. The technique is suitable for the exposure of solid bioactive glass granules. However, the long-term performance of the surfaces needs further assessment.