Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 446
Filter
2.
Mikrochim Acta ; 191(7): 400, 2024 06 15.
Article in English | MEDLINE | ID: mdl-38879615

ABSTRACT

Ultrathin molecularly imprinted polymer (MIP) films were deposited on the surfaces of ZnO nanorods (ZNRs) and nanosheets (ZNSs) by electropolymerization to afford extended-gate field-effect transistor sensors for detecting phenytoin (PHT) in plasma. Molecular imprinting efficiency was optimized by controlling the contents of functional monomers and the template in the precursor solution. PHT sensing was performed in plasma solutions with various concentrations by monitoring the drain current as a function of drain voltage under an applied gate voltage of 1.5 V. The reliability and reproducibility of the fabricated sensors were evaluated through a solution treatment process for complete PHT removal and PHT adsorption-removal cycling, while selectivity was examined by analyzing responses to chemicals with structures analogous to that of PHT. Compared with the ZNS/extracted-MIP sensor and sensors with non-imprinted polymer (NIP) films, the ZNR/extracted-MIP sensor showed superior responses to PHT-containing plasma due to selective PHT adsorption, achieving an imprinting factor of 4.23, detection limit of 12.9 ng/mL, quantitation limit of 53.0 ng/mL, and selectivity coefficients of 3-4 (against tramadol) and ~ 5 (against diphenhydramine). Therefore, we believe that the MIP-based ZNR sensing platform is promising for the practical detection of PHT and other drugs and evaluation of their proper dosages.


Subject(s)
Anticonvulsants , Limit of Detection , Molecularly Imprinted Polymers , Phenytoin , Transistors, Electronic , Zinc Oxide , Anticonvulsants/blood , Anticonvulsants/analysis , Molecularly Imprinted Polymers/chemistry , Zinc Oxide/chemistry , Phenytoin/blood , Phenytoin/analysis , Phenytoin/chemistry , Humans , Molecular Imprinting , Nanotubes/chemistry , Adsorption , Reproducibility of Results , Polymers/chemistry
3.
Int J Periodontics Restorative Dent ; 44(3): 299-307, 2024 05 24.
Article in English | MEDLINE | ID: mdl-38787708

ABSTRACT

This study aimed to investigate the dimensional stability and quality of the alveolar ridge augmented using a synthetic bone block (SBB) at damaged extraction sockets. Four participants were included, and socket augmentation was performed using SBB and a collagen membrane. Intraoral and CBCT scans were performed before extraction (baseline), immediately postoperative (IP), and at 6 months postoperative (6M). At 6M, a trephine biopsy sample was obtained during implant placement, and the sample was observed using synchrotron. Soft tissue profile changes were assessed using profilometric analysis of the intraoral scan data, while dimensional changes in hard tissue were evaluated based on CBCT measurements. Bone quality was analyzed using synchrotron imaging. There were minimal changes in the soft tissue profile between baseline and IP, baseline and 6M, and IP and 6M (0.11 ± 1.08 mm3, 0.02 ± 0.8 mm3, and -0.65 ± 0.82 mm3, respectively). Horizontal bone width was measured at 1-mm increments from the augmented bone crest to 5 mm apically and revealed only a slight reduction (< 1 mm) at all levels between IP and 6M. The augmented bone height was well maintained from IP until 6M (-0.21 ± 0.53 mm). Synchrotron analysis revealed low to moderate bone quality after 6M (percentage of new bone: 16.49% ± 4.91%). Socket augmentation using SBB appears to be a viable technique for regenerating damaged extraction sockets, with the augmented ridge dimensions maintained up to 6M. Further long-term randomized clinical trials are needed.


Subject(s)
Alveolar Ridge Augmentation , Cone-Beam Computed Tomography , Synchrotrons , Tooth Socket , Humans , Tooth Socket/surgery , Tooth Socket/diagnostic imaging , Pilot Projects , Alveolar Ridge Augmentation/methods , Middle Aged , Male , Female , Tooth Extraction , Dental Implantation, Endosseous/methods , Adult , Bone Substitutes/therapeutic use , Aged , Collagen/therapeutic use
4.
J Prosthet Dent ; 2024 May 25.
Article in English | MEDLINE | ID: mdl-38797573

ABSTRACT

STATEMENT OF PROBLEM: Interest is growing in immediately loading definitive implant-supported prostheses. However, it appears that implant protocols are evolving faster than their scientific validation. PURPOSE: The purpose of this scoping review was to identify the current trends, feasibility, and clinical outcomes of a specific clinical loading scenario (type A), where a single definitive implant-retained restoration is delivered within 3 days. The focus question was "In partially edentulous patients requiring an implant-retained prosthesis (population), is immediate loading with a definitive restoration (concept) a viable treatment option (context)?" MATERIAL AND METHODS: An electronic search was conducted in the PubMed, CENTRAL, Scopus, Embase, and Web of Science databases. Two authors independently reviewed the studies, screened titles and abstracts, and performed full-text analysis. Cross-reference checks within the bibliography of included studies, relevant reviews, and guideline were conducted. Bibliometric information and study details were extracted. RESULTS: The search identified 2568 titles after removing duplicates. Four studies involving 91 participant and 100 implant-retained restorations were included in this scoping review. The selected articles were a randomized controlled trial (RCT), a prospective clinical study, and the remaining 2 were case series. The follow-up periods investigated ranged from 6 to 26 months. All studies evaluated marginal bone loss as a primary outcome, and only 1 implant failure was reported. Patient-reported outcome measures were favorable, and no major biological or technical complications were reported in any study. CONCLUSIONS: Immediate loading with a definitive restoration within 3 days appears to be a suitable approach in specific clinical situations.

5.
ACS Omega ; 9(18): 20338-20349, 2024 May 07.
Article in English | MEDLINE | ID: mdl-38737046

ABSTRACT

Aldose reductase plays a central role in diabetes mellitus (DM) associated complications by converting glucose to sorbitol, resulting in a harmful increase of reactive oxygen species (ROS) in various tissues, such as the heart, vasculature, neurons, eyes, and kidneys. We employed a comprehensive approach, integrating both ligand- and structure-based virtual screening followed by experimental validation. Initially, candidate compounds were extracted from extensive drug and chemical libraries using the DeepChem's GraphConvMol algorithm, leveraging its capacity for robust molecular feature representation. Subsequent refinement employed molecular docking and molecular dynamics (MD) simulations, which are crucial for understanding compound-receptor interactions and dynamic behavior in a simulated physiological environment. Finally, the candidate compounds were subjected to experimental validation of their biological activity using an aldose reductase inhibitor screening kit. The comprehensive approach led to the identification of a promising compound, demonstrating significant potential as an aldose reductase inhibitor. This comprehensive approach not only yields a potential therapeutic intervention for DM-related complications but also establishes an integrated protocol for drug development, setting a new benchmark in the field.

6.
Article in English | MEDLINE | ID: mdl-38750786

ABSTRACT

BACKGROUND: Bone marrow stimulation (BMS), a procedure involving the creation of multiple channels in the greater tuberosity, is often performed alongside arthroscopic rotator cuff repair (ARCR). This study evaluated the effect of BMS on clinical and structural outcomes following ARCR. METHOD: This study involved 204 patients with small, medium, and large full-thickness rotator cuff tears. In all, 103 patients who underwent BMS and ARCR made up the BMS group, while the 101 patients who only had ARCR made up the control group with randomization. Clinical and functional outcomes were assessed before and at 3 months, 6 months, 1 year, and 2 years after surgery, using parameters such as range of motion, functional scores (ASES and constant score), and clinical scores (VAS). Tendon integrity was also examined postoperatively via ultrasound at 6 months and 2 years. RESULTS: There were no significant differences between the two groups concerning range of motion, functional scores (ASES score and constant score), and clinical score (VAS) during the 2-year post-surgery period (all p>0.05). Similarly, the rotator cuff retear rate, as assessed using ultrasonographic tendon integrity checks over 2 years post-surgery, did not significantly vary between the groups (all p>0.05). CONCLUSION: There were no significant disparities in functional scores and clinical outcomes between the BMS and control groups. Further, no significant differences were observed in tendon integrity post-surgery. Therefore, the inclusion or exclusion of BMS is not anticipated to influence the postoperative outcome in ARCR for patients with small, medium, or large rotator cuff tears.

7.
Medicine (Baltimore) ; 103(17): e37978, 2024 Apr 26.
Article in English | MEDLINE | ID: mdl-38669393

ABSTRACT

RATIONALE: Visceral artery aneurysm is a rare and potentially fatal vascular condition that typically affects the superior mesenteric or inferior mesenteric arteries, the splenic, hepatic, and celiac arteries, as well as their branches. Visceral artery aneurysms can usually be treated using endovascular intervention, open surgery, or percutaneous thrombin injection. PATIENT CONCERNS: A 9-year-old girl was admitted to our trauma center with abdominal and bilateral leg pain after a car accident involving a head-on collision. DIAGNOSIS: Abdominal computed tomography (CT) showed bowel herniation through a muscle defect in the left lateral abdominal wall. There was a small amount of fluid around the liver and spleen, mild thickening of the small bowel wall, and infiltration in the small bowel mesentery, indicating the possibility of small bowel injury. INTERVENTIONS: Emergent exploratory laparotomy was performed. After resection of the ischemic parts of the terminal ileum and sigmoid colon, intestinal continuity was reestablished. Primary repair was performed on a traumatic left lateral abdominal wall hernia. She recovered well postoperatively without any complications. A follow-up abdominal CT scan after 2 months showed a pseudoaneurysm of the ileal branch of the superior mesenteric artery. Despite the absence of any gastrointestinal symptoms, the pseudoaneurysm was treated by endovascular intervention using numerous coils because of the significant risk of delayed rupture or massive bleeding. OUTCOMES: Follow-up abdominal CT scan after 6 months showed complete occlusion and resorption of the pseudoaneurysm. LESSONS: Although it is technically challenging, endovascular coil embolization may be a feasible technique in children with traumatic visceral artery pseudoaneurysms without complications.


Subject(s)
Aneurysm, False , Endovascular Procedures , Mesenteric Artery, Superior , Humans , Female , Child , Aneurysm, False/etiology , Aneurysm, False/therapy , Aneurysm, False/surgery , Mesenteric Artery, Superior/injuries , Mesenteric Artery, Superior/diagnostic imaging , Mesenteric Artery, Superior/surgery , Endovascular Procedures/methods , Ileum/blood supply , Accidents, Traffic , Tomography, X-Ray Computed , Abdominal Injuries/complications , Embolization, Therapeutic/methods
8.
Food Chem ; 450: 139199, 2024 Aug 30.
Article in English | MEDLINE | ID: mdl-38640539

ABSTRACT

Peppers (Piper nigrum L.) are distinguished by their pungent flavor and aroma. Piperine is a major acid-amide alkaloid with a piperidine ring that gives pepper its flavor and scent. In plant metabolomics research, the accessibility of the chemical standards is critical for scientific credibility. We isolated and identified 10 novel dimers of acid amide alkaloids (9-15 and 20-22), along with 12 known monomers (1-6) and dimers (7, 8, 16-19) from black pepper. Subsequently, we found the distribution of monomers and dimers of acid amide alkaloids in black and white peppers by twenty-two acid amide alkaloids which we obtained using the molecular networking technique and multivariate analysis to reveal the molecular relationships between the acid amide alkaloids in black and white peppers. Our research delved into the chemical diversity of acid amide alkaloids in black and white peppers, which could help inform future culinary and potential medicinal utilization of pepper.


Subject(s)
Alkaloids , Amides , Piper nigrum , Plant Extracts , Piper nigrum/chemistry , Alkaloids/chemistry , Alkaloids/analysis , Plant Extracts/chemistry , Amides/chemistry , Dimerization , Molecular Structure
9.
J Esthet Restor Dent ; 2024 Apr 09.
Article in English | MEDLINE | ID: mdl-38591169

ABSTRACT

OBJECTIVES: To evaluate clinical, clinician- and patient-reported outcomes (PROs) of two adjacent single posterior implants immediately loaded with definitive single crowns up to 1 year. Ten patients in need of two adjacent posterior single implants were included. All implants were placed applying a fully digital workflow. Definitive screw-retained single zirconia crowns were delivered within 72 h after implant placement. Clinical parameters, patient- and clinician-reported outcomes were assessed up to 1 year of follow-up. CLINICAL CONSIDERATIONS: Clinical outcomes remained stable, with no implant failures or technical and biological complications throughout the observation period. Patient satisfaction was very high at baseline (crown delivery) and remained consistently high at 6 and 12 months of follow-up. Crown insertion 3 days after implant placement was rated as an easy procedure by clinicians. CONCLUSIONS: Two adjacent single implants with immediate definitive restorations (<72 h) in the posterior region appear to be a viable and easy treatment option to shorten the overall treatment time and potentially enhancing patient satisfaction. However, randomized controlled trials are needed to confirm the advantages of this treatment protocol over a delayed loading approach. CLINICAL SIGNIFICANCE: In selected cases, immediate implant loading with definitive restorations in the posterior region appears a valuable and straightforward option to shorten the overall treatment time.

10.
Sci Rep ; 14(1): 7787, 2024 04 02.
Article in English | MEDLINE | ID: mdl-38565933

ABSTRACT

This retrospective study aimed to determine risk factors associated with post-operative bleeding after dentoalveolar surgery in patients taking anticoagulants. Patients taking anticoagulants who were planned to undergo periodontal flap operation, tooth extraction or implant surgery were included. Patients were divided into two subgroups according to the maintenance of anticoagulants following medical consultation: (1) maintenance group and (2) discontinuation group. The analysed patient-related factors included systemic diseases, maintenance of anticoagulants and types of anticoagulant. Intra- and post-operative treatment-related factors, haemostatic methods and post-operative bleeding were collected for statistical analyses. There were 35 post-operative bleeding complications (6.5%) in the 537 included patients: 21 (8.6%) in maintenance group and 14 (4.8%) in discontinuation group. The type of anticoagulant (p = 0.037), tooth extraction combined with bone grafting (p = 0.016) and type of implant surgery (p = 0.032) were significantly related to the post-operative bleeding rate. In the maintenance group, atrial fibrillation [odds ratio (OR) = 6.051] and vitamin K inhibitors (OR = 3.679) were associated with a significantly higher bleeding risk. From this result, it can be inferred that the decision to continue anticoagulants should be made carefully based on the types of anticoagulant and the characteristics of dentoalveolar surgeries performed: extraction with bone grafting, multiple implantations and involvement of maxillary arch.


Subject(s)
Anticoagulants , Atrial Fibrillation , Humans , Anticoagulants/adverse effects , Cohort Studies , Retrospective Studies , Postoperative Hemorrhage/etiology , Postoperative Hemorrhage/chemically induced , Tooth Extraction/adverse effects , Atrial Fibrillation/complications , Administration, Oral
11.
Biosens Bioelectron ; 255: 116269, 2024 Jul 01.
Article in English | MEDLINE | ID: mdl-38579624

ABSTRACT

Saxitoxin (STX), which is produced by certain dinoflagellate species, is a type of paralytic shellfish poisoning toxin that poses a serious threat to human health and the environment. Therefore, developing a technology for the convenient and cost-effective detection of STX is imperative. In this study, we developed an affinity peptide-imprinted polymer-based indirect competitive ELISA (ic-ELISA) without using enzyme-toxin conjugates. AuNP/Co3O4@Mg/Al cLDH was synthesized by calcining AuNP/ZIF-67@Mg/Al LDH, which was obtained by combining AuNPs, ZIF-67, and flower-like Mg/Al LDH. This synthesized nanozyme exhibited high catalytic activity (Km = 0.24 mM for TMB and 132.5 mM for H2O2). The affinity peptide-imprinted polymer (MIP) was imprinted with an STX-specific template peptide (STX MIP) on a multi-well microplate and then reacted with an STX-specific signal peptide (STX SP). The interaction between the STX SP and MIP was detected using a streptavidin-coated nanozyme (SA-AuNP/Co3O4@Mg/Al cLDH). The developed MIP-based ic-ELISA exhibited excellent selectivity and sensitivity, with a limit of detection of 3.17 ng/mL (equivalent: 0.317 µg/g). Furthermore, the system was validated using a commercial ELISA kit and mussel tissue samples, and it demonstrated a high STX recovery with a low coefficient of variation. These results imply that the developed ic-ELISA can be used to detect STX in real samples.


Subject(s)
Biosensing Techniques , Cobalt , Metal Nanoparticles , Oxides , Humans , Marine Toxins/analysis , Molecularly Imprinted Polymers , Gold , Hydrogen Peroxide , Shellfish/analysis , Saxitoxin , Enzyme-Linked Immunosorbent Assay/methods , Peptides , Polymers
12.
Bioengineering (Basel) ; 11(3)2024 Feb 24.
Article in English | MEDLINE | ID: mdl-38534489

ABSTRACT

This animal study was aimed to evaluate the efficacy of new bone formation and volume maintenance according to the particle type and the collagen membrane function for grafted octacalcium phosphate (OCP) in rabbit calvarial defects. The synthetic bone substitutes were prepared in powder form with 90% OCP and granular form with 76% OCP, respectively. The calvarial defects were divided into four groups according to the particle type and the membrane application. All specimens were acquired 2 weeks (n = 5) and 8 weeks (n = 5) after surgery. According to the micro-CT results, the new bone volume increased at 2 weeks in the 76% OCP groups compared to the 90% OCP groups, and the bone volume ratio was significantly lower in the 90% OCP group after 2 weeks. The histomorphometric analysis results indicated that the new bone area and its ratio in all experimental groups were increased at 8 weeks except for the group with 90% OCP without a membrane. Furthermore, the residual bone graft area and its ratio in the 90% OCP groups were decreased at 8 weeks. In conclusion, all types of OCP could be applied as biocompatible bone graft materials regardless of its density and membrane application. Neither the OCP concentration nor the membrane application had a significant effect on new bone formation in the defect area, but the higher the OCP concentration, the less graft volume maintenance was needed.

13.
Molecules ; 29(6)2024 Mar 19.
Article in English | MEDLINE | ID: mdl-38542998

ABSTRACT

The increasing utilization of artificial intelligence algorithms in drug development has proven to be highly efficient and effective. One area where deep learning-based approaches have made significant contributions is in drug repositioning, enabling the identification of new therapeutic applications for existing drugs. In the present study, a trained deep-learning model was employed to screen a library of FDA-approved drugs to discover novel inhibitors targeting JAK2. To accomplish this, reference datasets containing active and decoy compounds specific to JAK2 were obtained from the DUD-E database. RDKit, a cheminformatic toolkit, was utilized to extract molecular features from the compounds. The DeepChem framework's GraphConvMol, based on graph convolutional network models, was applied to build a predictive model using the DUD-E datasets. Subsequently, the trained deep-learning model was used to predict the JAK2 inhibitory potential of FDA-approved drugs. Based on these predictions, ribociclib, topiroxostat, amodiaquine, and gefitinib were identified as potential JAK2 inhibitors. Notably, several known JAK2 inhibitors demonstrated high potential according to the prediction results, validating the reliability of our prediction model. To further validate these findings and confirm their JAK2 inhibitory activity, molecular docking experiments were conducted using tofacitinib-an FDA-approved drug for JAK2 inhibition. Experimental validation successfully confirmed our computational analysis results by demonstrating that these novel drugs exhibited comparable inhibitory activity against JAK2 compared to tofacitinib. In conclusion, our study highlights how deep learning models can significantly enhance virtual screening efforts in drug discovery by efficiently identifying potential candidates for specific targets such as JAK2. These newly discovered drugs hold promises as novel JAK2 inhibitors deserving further exploration and investigation.


Subject(s)
Artificial Intelligence , Drug Repositioning , Molecular Docking Simulation , Reproducibility of Results , Neural Networks, Computer
14.
J Clin Periodontol ; 51(6): 766-773, 2024 Jun.
Article in English | MEDLINE | ID: mdl-38356227

ABSTRACT

AIM: To test whether early implant placement into the extraction socket containing an uncalcified provisional matrix leads to successful osseointegration and stable marginal bone levels. MATERIALS AND METHODS: In six mongrel dogs, the mandibular molars were extracted. Three weeks later, early implant placement was performed according to three experimental protocols: (i) flapless implant placement with preservation of the provisional matrix; (ii) flap elevation, socket debridement and implant placement; and (iii) flap elevation, socket debridement, implant placement and guided bone regeneration (GBR). One untreated extraction socket served as a control group. Data analyses were based on histologic slides 3 months after implant placement. RESULTS: There were no differences in bone-to-implant contact between the three experimental groups (66.97%, 58.89% and 60.89%, respectively) (inter-group comparison p = .42). Marginal bone levels, first bone-to-implant contact as well as the thickness of the connective tissue did not reveal any significant differences between the groups (p = .85, .60 and .65, respectively). CONCLUSIONS: Flapless early implant placement into posterior extraction sockets was as effective as an open flap approach in conjunction with GBR. Mineralization of the socket seems to occur irrespective of the presence of dental implants or biomaterials.


Subject(s)
Osseointegration , Tooth Socket , Animals , Dogs , Osseointegration/physiology , Tooth Socket/surgery , Tooth Extraction , Surgical Flaps/surgery , Guided Tissue Regeneration, Periodontal/methods , Dental Implantation, Endosseous/methods , Dental Implants , Mandible/surgery , Debridement , Connective Tissue , Molar , Immediate Dental Implant Loading/methods
16.
Nano Lett ; 24(8): 2574-2580, 2024 Feb 28.
Article in English | MEDLINE | ID: mdl-38349338

ABSTRACT

The highly programmable and responsive molecular recognition properties of DNA provide unparalleled opportunities for fabricating dynamic nanostructures capable of structural transformation in response to various external stimuli. However, they typically operate in tightly controlled environments because certain conditions (ionic strength, pH, temperature, etc.) must be met for DNA duplex formation. In this study, we adopted site-specific enzymatic ligation and DNA-based layer-by-layer thin film fabrication to build shape-morphing DNA-linked nanoparticle films operational in a broad range of environments. The ligated films remained intact in unusual conditions such as pure water and high temperature causing dissociation of DNA duplexes and showed predictable and reversible shape morphing in response to various environmental changes and DNA exchange reactions. Furthermore, domain-selective ligation combined with photoinduced interlayer mixing allowed for the fabrication of unusual edge-sealed double-layered films through midlayer etching, which is difficult to realize by other methods.


Subject(s)
Nanoparticles , Nanostructures , DNA/chemistry , Water , Temperature
17.
Nanomaterials (Basel) ; 14(4)2024 Feb 12.
Article in English | MEDLINE | ID: mdl-38392722

ABSTRACT

This study developed an advanced 850 nm centered distributed Bragg reflector (DBR) (broadband DBR) composed of nanomaterial-based multiple structures to improve the optical efficiency of an 850 nm near-infrared light-emitting diode (NIR-LED). A combined 850 nm centered broadband DBR was fabricated by growing an 800 nm centered ten-pair DBR on a 900 nm centered ten-pair DBR (denoted as a combined DBR). The combined DBR exhibited a slightly wider peak band than conventional DBRs. Furthermore, the peak band width of the combined DBR significantly increased upon using a reflective AlAs buffer layer that reduced the overlapped reflection. The output power (20.5 mW) of NIR-LED chips using the combined DBR with an AlAs buffer layer exceeded that of a conventional 850 nm centered DBR (14.5 mW) by more than 40%. Results indicated that combining the optical conditions of wavelengths and the AlAs buffer layer effectively strengthened the broadband effect of the DBR and increased the optical efficiency of the 850 nm NIR-LED.

18.
J Korean Soc Radiol ; 85(1): 197-203, 2024 Jan.
Article in English | MEDLINE | ID: mdl-38362399

ABSTRACT

Tuberculous pericarditis is an extrapulmonary manifestation of tuberculosis that is most commonly associated with pericardial thickening, effusion, and calcification. We present a case of tuberculous pericarditis mimicking a malignant pericardial tumor in a 77-year-old male. CT revealed an irregular and nodular pericardial thickening. MRI revealed high signal intensity on T1-weighted fat-suppressed images and peripheral rim enhancement after gadolinium administration. MRI can be helpful in determining the differential diagnoses in cases of tuberculous pericarditis with nonspecific imaging findings.

19.
PLoS One ; 19(2): e0299579, 2024.
Article in English | MEDLINE | ID: mdl-38412168

ABSTRACT

Piezoelectric biomaterials can generate piezoelectrical charges in response to mechanical activation. These generated charges can directly stimulate bone regeneration by triggering signaling pathway that is important for regulating osteogenesis of cells seeded on the materials. On the other hand, mechanical forces applied to the biomaterials play an important role in bone regeneration through the process called mechanotransduction. While mechanical force and electrical charges are both important contributing factors to bone tissue regeneration, they operate through different underlying mechanisms. The utilizations of piezoelectric biomaterials have been explored to serve as self-charged scaffolds which can promote stem cell differentiation and the formation of functional bone tissues. However, it is still not clear how mechanical activation and electrical charge act together on such a scaffold and which factors play more important role in the piezoelectric stimulation to induce osteogenesis. In our study, we found Poly(l-lactic acid) (PLLA)-based piezoelectric scaffolds with higher piezoelectric charges had a more pronounced osteoinductive effect than those with lower charges. This provided a new mechanistic insight that the observed osteoinductive effect of the piezoelectric PLLA scaffolds is likely due to the piezoelectric stimulation they provide, rather than mechanical stimulation alone. Our findings provide a crucial guide for the optimization of piezoelectric material design and usage.


Subject(s)
Mechanotransduction, Cellular , Tissue Scaffolds , Osteogenesis , Biocompatible Materials/pharmacology , Polyesters/pharmacology , Lactic Acid/pharmacology , Tissue Engineering
20.
Bioorg Chem ; 145: 107222, 2024 Apr.
Article in English | MEDLINE | ID: mdl-38401359

ABSTRACT

Ubiquitination is a representative post-translational modification that tags target proteins with ubiquitin to induce protein degradation or modify their functions. Deubiquitinating enzymes (DUBs) play a crucial role in reversing this process by removing ubiquitin from target proteins. Among them, USP2a has emerged as a promising target for cancer therapy due to its oncogenic properties in various cancer types, but its inhibitors have been limited. In this study, our aim was to optimize the structure of ML364, a USP2a inhibitor, and synthesize a series of its derivatives to develop potent USP2a inhibitors. Compound 8v emerged as a potential USP2a inhibitor with lower cytotoxicity compared to ML364. Cellular assays demonstrated that compound 8v effectively reduced the levels of USP2a substrates and attenuated cancer cell growth. We confirmed its direct interaction with the catalytic domain of USP2a and its selective inhibitory activity against USP2a over other USP subfamily proteins (USP7, 8, or 15). In conclusion, compound 8v has been identified as a potent USP2a inhibitor with substantial potential for cancer therapy.


Subject(s)
Endopeptidases , Ubiquitin , Endopeptidases/chemistry , Proteolysis , Ubiquitin/metabolism , Ubiquitination
SELECTION OF CITATIONS
SEARCH DETAIL
...