Disrupting FKF1 homodimerization increases FT transcript levels in the evening by enhancing CO stabilization.

KEY MESSAGE: FKF1 dimerization is crucial for proper FT levels to fine-tune flowering time. Attenuating FKF1 homodimerization increased CO abundance by enhancing its COP1 binding, thereby accelerating flowering under long days. In Arabidopsis (Arabidopsis thaliana), the blue-light photoreceptor FKF1 (FLAVIN-BINDING, KELCH REPEAT, F-BOX 1) plays a key role in inducing the expression of FLOWERING LOCUS T (FT), encoding the main florigenic signal in plants, in the late afternoon under long-day conditions (LDs) by forming dimers with FT regulators. Although structural studies have unveiled a variant of FKF1 (FKF1 I160R) that disrupts homodimer formation in vitro, the mechanism by which disrupted FKF1 homodimer formation regulates flowering time remains elusive. In this study, we determined that the attenuation of FKF1 homodimer formation enhances FT expression in the evening by promoting the increased stability of CONSTANS (CO), a primary activator of FT, in the afternoon, thereby contributing to early flowering. In contrast to wild-type FKF1, introducing the FKF1 I160R variant into the fkf1 mutant led to increased FT expression under LDs. In addition, the FKF1 I160R variant exhibited diminished dimerization with FKF1, while its interaction with GIGANTEA (GI), a modulator of FKF1 function, was enhanced under LDs. Furthermore, the FKF1 I160R variant increased the level of CO in the afternoon under LDs by enhancing its binding to COP1, an E3 ubiquitin ligase responsible for CO degradation. These findings suggest that the regulation of FKF1 homodimerization and heterodimerization allows plants to finely adjust FT expression levels around dusk by modulating its interactions with GI and COP1.

Classifications of Prominent Mandibular Angle and Surgical Considerations for Mandibuloplasty.

Contouring surgery is an operation that makes a smooth, oval-shaped face by removing protruding parts of the face. In particular, mandibuloplasty is a procedure that softens the shape of the mandible and is a popular procedure among Asians with a dominant mesocephalic profile. In this study, we tried to discuss the considerations before surgery by dividing the mandibular shape into morphologic aspects in the lateral and frontal views and anatomic considerations. In the lateral view, it is essential to consider the posterior ramal height and mandibular body length of each patient. These factors are closely related to the postoperative outcomes. Consideration of the mandibular plane angle is also essential. In the frontal view, the position of the gonial angle relative to the ramal body should be considered because the position of the gonial angle can affect the difficulty of operation. Anatomic considerations include antero-posterior ramal width, bucco-lingual width of mandibular body, amount of mouth opening, and location of inferior alveolar nerve. These are important factors that determine the difficulty of the operation. In this study, classification according to the shape and shape of the mandible was presented, and considerations for each classification were discussed. Cosmetic surgery is a socio-psychologically meaningful procedure that not only improves the esthetics but also improves the mental well-being of the patients. Therefore, it will be possible to provide better medical services to patients if clinicians are fully aware of the factors that can increase the difficulty of the operation and the factors that affect the surgical outcome.

Polymorphism of garnet solid electrolytes and its implications for grain-level chemo-mechanics.

Understanding and mitigating filament formation, short-circuit and solid electrolyte fracture is necessary for advanced all-solid-state batteries. Here, we employ a coupled far-field high-energy diffraction microscopy and tomography approach for assessing the chemo-mechanical behaviour for dense, polycrystalline garnet (Li7La3Zr2O12) solid electrolytes with grain-level resolution. In situ monitoring of grain-level stress responses reveals that the failure mechanism is stochastic and affected by local microstructural heterogeneity. Coupling high-energy X-ray diffraction and far-field high-energy diffraction microscopy measurements reveals the presence of phase heterogeneity that can alter local chemo-mechanics within the bulk solid electrolyte. These local regions are proposed to be regions with the presence of a cubic polymorph of LLZO, potentially arising from local dopant concentration variation. The coupled tomography and FF-HEDM experiments are combined with transport and mechanics modelling to illustrate the degradation of polycrystalline garnet solid electrolytes. The results showcase the pathways for processing high-performing solid-state batteries.

Structural changes across thermodynamic maxima in supercooled liquid tellurium: A water-like scenario.

Liquid polymorphism is an intriguing phenomenon that has been found in a few single-component systems, the most famous being water. By supercooling liquid Te to more than 130 K below its melting point and performing simultaneous small-angle and wide-angle X-ray scattering measurements, we observe clear maxima in its thermodynamic response functions around 615 K, suggesting the possible existence of liquid polymorphism. A close look at the underlying structural evolution shows the development of intermediate-range order upon cooling, most strongly around the thermodynamic maxima, which we attribute to bond-orientational ordering. The striking similarities between our results and those of water, despite the lack of hydrogen-bonding and tetrahedrality in Te, indicate that water-like anomalies may be a general phenomenon among liquid systems with competing bond- and density-ordering.

Utilizing Previously Grafted Sinus as Intraoral Donor Site for Successful Augmentation in Peri-Implant Osseous Defect: A Case Report.

The purpose of this case report is to introduce a novel guided bone regeneration (GBR) technique that utilized bone harvested from previously grafted maxillary sinus with deproteinized bovine bone mineral (DBBM) 16 years ago. The patient is a 63-year-old male with hopeless maxillary right molars due to severe bone loss. Two months after the extraction, two bone blocks were harvested with a trephine drill from the lateral wall. One was used for histologic analysis and the other was crushed into particulate forms, which was used for a GBR procedure around an implant at the time of implant placement. The grafted site was then covered with a resorbable collagen membrane. The histological specimen showed newly-formed bone containing residual DBBM particles. The DBBM in the harvested bone was mostly resorbed; DBBM particles comprised only 3.6% of the total bone volume. The final prosthesis was delivered six months post-operatively. No change in crestal bone around the implant was observed throughout the 2 year follow-up period. Within the limitation of the present case report, previously grafted sinus can be a good donor site for further harvesting for a successful GBR procedure.

Microstructure and energy dispersive diffraction reconstruction of 3D patterns of crystallographic texture in a shark centrum.

Purpose: Tomography using diffracted x-rays produces reconstructions mapping quantities such as crystal lattice parameter(s), crystallite size, and crystallographic texture, information quite different from that obtained with absorption or phase contrast. Diffraction tomography is used to map an entire blue shark centrum with its double cone structure (corpora calcerea) and intermedialia (four wedges). Approach: Energy dispersive diffraction (EDD) and polychromatic synchrotron x-radiation at 6-BM-B, the Advanced Photon Source, were used. Different, properly oriented Bragg planes diffract different x-ray energies; these intensities are measured by one of ten energy-sensitive detectors. A pencil beam defines the irradiated volume, and a collimator before each energy-sensitive detector selects which portion of the irradiated column is sampled at any one time. Translating the specimen along X , Y , and Z axes produces a 3D map. Results: We report 3D maps of the integrated intensity of several bioapatite reflections from the mineralized cartilage centrum of a blue shark. The c axis reflection's integrated intensities and those of a reflection with no c axis component reveal that the cone wall's bioapatite is oriented with its c axes lateral, i.e., perpendicular to the backbone's axis, and that the wedges' bioapatite is oriented with its c axes axial. Absorption microcomputed tomography (laboratory and synchrotron) and x-ray excited x-ray fluorescence maps provide higher resolution views. Conclusion: The bioapatite in the cone walls and wedges is oriented to resist lateral and axial deflections, respectively. Mineralized tissue samples can be mapped in 3D with EDD tomography and subsequently studied by destructive methods.

BraggNN: fast X-ray Bragg peak analysis using deep learning.

X-ray diffraction based microscopy techniques such as high-energy diffraction microscopy (HEDM) rely on knowledge of the position of diffraction peaks with high precision. These positions are typically computed by fitting the observed intensities in detector data to a theoretical peak shape such as pseudo-Voigt. As experiments become more complex and detector technologies evolve, the computational cost of such peak-shape fitting becomes the biggest hurdle to the rapid analysis required for real-time feedback in experiments. To this end, we propose BraggNN, a deep-learning based method that can determine peak positions much more rapidly than conventional pseudo-Voigt peak fitting. When applied to a test dataset, peak center-of-mass positions obtained from BraggNN deviate less than 0.29 and 0.57 pixels for 75 and 95% of the peaks, respectively, from positions obtained using conventional pseudo-Voigt fitting (Euclidean distance). When applied to a real experimental dataset and using grain positions from near-field HEDM reconstruction as ground-truth, grain positions using BraggNN result in 15% smaller errors compared with those calculated using pseudo-Voigt. Recent advances in deep-learning method implementations and special-purpose model inference accelerators allow BraggNN to deliver enormous performance improvements relative to the conventional method, running, for example, more than 200 times faster on a consumer-class GPU card with out-of-the-box software.

A phase I study to evaluate the safety, tolerability, pharmacodynamic and pharmacokinetic profiles of ocular GLH8NDE in healthy male adults.

GLH8NDE, a derivative of eupatilin, is currently under development to treat dry eye disease. We conducted a randomized, double-masked, placebo-controlled, single- and multiple-day study to evaluate safety, tolerability, pharmacodynamics, and pharmacokinetics of ocular GLH8NDE in healthy male adults. Subjects randomly received topical ocular dosing of GLH8NDE or its matching placebo for a day, then for 7 consecutive days with a 62-h washout at one of the following daily doses: 9, 18, 36 (Koreans), and 36 mg (Whites). The study drug was administered in divided doses over 10 h with 2- or 5-h intervals. Thirty-nine (97.5%) out of 40 subjects completed the study. A total of 17 subjects experienced 31 treatment-emergent adverse events, all of which were mild in severity and recovered without sequelae. Neither pathological changes in eye compartments nor clinically significant systemic effects were observed. GLH8NDE was rapidly absorbed reaching the peak concentration within 0.25-0.75 h postdose. The systemic exposure as measured by area under the concentration-time curve from time of administration up to the time of the last quantifiable concentration (AUClast ) after single-day administration of the same dose was 109% higher in Koreans than in Whites. In conclusion, GLH8NDE was safe and well-tolerated in healthy Korean and White male adults at 9-36 mg/day after single- and multiple-day administrations.

Repeatability and sensitivity characterization of the far-field high-energy diffraction microscopy instrument at the Advanced Photon Source.

In the last two decades, far-field high-energy diffraction microscopy (FF-HEDM) and similar non-destructive techniques have been actively developed at synchrotron light sources around the world. As these techniques (and associated analysis tools) are becoming more available for the general users of these light sources, it is important and timely to characterize their performance and capabilities. In this work, the FF-HEDM instrument implemented at the 1-ID-E endstation of the Advanced Photon Source (APS) is summarized. The set of measurements conducted to characterize the instrument's repeatability and sensitivity to changes in grain orientation and position are also described. When an appropriate grain matching method is used, the FF-HEDM instrument's repeatability is approximately 5 µm in translation, 0.02° in rotation, and 2 × 10-4 in strain; the instrument sensitivity is approximately 5 µm in translation and 0.05° in rotation.

Montelukast microsuspension with hypromellose for improved stability and oral absorption.

Oral montelukast (MTK) is prescribed to treat asthma or rhinitis, and is clinically investigated as new medication in the treatment of Alzheimer's dementia. Herein, in order to better patient's compliance, microsuspensions (MSs)-based oral liquid preparations of montelukast (MTK) were formulated with polymeric suspending agents including hypromellose (HPMC), and those drug-polymer interaction, physicochemical stability, dissolution, and in vivo pharmacokinetic profile was evaluated. When amorphous MTK particle was suspended in aqueous vehicle, it was readily converted into crystalline form and grown into aggregates, drastically lowering dissolution rate. However, the addition of HPMC polymer markedly suppressed the crystal growth, providing both improved drug stability and profound dissolution profile. Raman spectrometry denoted the inter-molecular hydrogen boding between MTK particle and HPMC polymer. The crystal growth or dissolution profile of MSs was markedly affected by pharmaceutical additives (sucrose or simethicone) in the preparations or storage temperature. The optimized HPMC-based MS exhibited over 80% higher bioavailability, compared to marketed granule (Singulair®) in rats. Therefore, novel MTK-loaded MS can be a promising liquid preparation, bettering oral absorption and patient's compliance.

Effect of evaporation-induced osmotic changes in culture media in a dry-type incubator on clinical outcomes in in vitro fertilization-embryo transfer cycles.

OBJECTIVE: This study investigated whether adding outer-well medium to inhibit osmotic changes in culture media in a dry-type incubator improved the clinical outcomes of in vitro fertilization-embryo transfer (IVF-ET) cycles. METHODS: In culture dishes, the osmotic changes in media (20 µL)-covered oil with or without outer-well medium (humid or dry culture conditions, respectively) were compared after 3 days of incubation in a dry-type incubator. One-step (Origio) and G1/G2 (Vitrolife) media were used. RESULTS: The osmotic changes in the dry culture condition (308 mOsm) were higher than in the humid culture conditions (285-290 mOsm) after 3 days of incubation. In day 3 IVF-ET cycles, although the pregnancy rate did not significantly differ between the dry (46.2%) and humid culture (52.2%) groups, the rates of abortion and ongoing pregnancy were significantly better in the humid culture group (2.3% and 50.2%, respectively) than in the dry culture group (8.3% and 37.8%, respectively, p<0.05). In day 5 IVF-ET cycles, the abortion rate was significantly lower in the humid culture group (2.2%) than in the dry culture group (25.0%, p<0.01), but no statistically significant difference was observed in the rates of clinical and ongoing pregnancy between the dry (50.0% and 25.0%, respectively) and humid culture groups (59.5% and 57.3%, respectively) because of the small number of cycles. CONCLUSION: Hyperosmotic changes in media occurred in a dry-type incubator by evaporation, although the medium was covered with oil. These osmotic changes were efficiently inhibited by supplementation of outer-well medium, which resulted in improved pregnancy outcomes.

Treatment of life-threatening acute osteomyelitis of the jaw during chemotherapy: a case report.

Oral and maxillofacial infection is a common complication in patients undergoing chemotherapy. The treatment of oral diseases in such patients differs from that administered to healthy patients. This paper reports a case of acute osteomyelitis of odontogenic origin following a recent chemotherapy session. The patient's condition was life-threatening because of neutropenic fever and sepsis that developed during the inpatient supportive care. However, the patient showed prompt recovery within 40 days following the use of appropriate antibiotics and routine dressing, without the requirement for surgical treatment, except tooth extraction. As seen in this case, patients undergoing chemotherapy are more susceptible to rapid progression of infections in the oral and maxillofacial areas. Therefore, accurate diagnosis through prompt clinical and radiological examination, identification of the extent of infection, and assessment of the patient's immune system are crucial for favorable outcomes. It is also necessary to eliminate the source of infection through appropriate administration of antibiotics. In particular, a broad-spectrum antibiotic with anti-pneumococcal activity is essential. Proper antibiotic administration and wound dressing are essential for infection control. Furthermore, close consultation with a hemato-oncologist is necessary for effective infection management based on the professional evaluation of patients' immune mechanisms.

Comparing the visual outcome, visual quality, and satisfaction among three types of multi-focal intraocular lenses.

This study compared the visual outcome, visual quality, and satisfaction following implantation of the Mix-and-Match bifocal IOLs (+ 2.75 D and + 3.25 D add power Tecnis Multifocal Model), EDOF IOL (Tecnis Symfony IOL), and Trifocal IOL (FineVision PodFT, PhysIOL). All outcomes were compared among the three groups. The manifest refraction indicated that the EDOF group had significantly higher myopic spherical equivalent values than did the others. In the terms of visual acuity, there were no significant differences in far or intermediate visual acuity among the three groups. Only in near (33 cm), the EDOF group had significantly worse binocular visual acuity than did the Trifocal group (p = 0.002). Regarding to defocus curve, the Trifocal group had better defocus curves at near distances (- 2.0 to - 3.5 D; p = 0.001 vs. EDOF) than did the other two groups. In contrast sensitivity test, the EDOF group had relatively lower value than did the other two groups. In reading speed, only at 0.3 logMAR (6.5-point font), Mix-and-Match group had a significantly higher reading speed than did the other two groups (p = < 0.001 vs. EDOF, p = 0.007 vs. Trifocal). also Mix-and-Match group showed significantly fewer visual artifacts. There were no differences between the three groups in terms of patient satisfaction.ClinicalTrials.gov number: NCT04019691.

Comparisons Between Successful Versus Unsuccessful Switches From Benzodiazepines or Zolpidem (Z-Drug) to Controlled-Release Melatonin in Patients With Major Depressive Disorder and Insomnia.

OBJECTIVES: Chronic use of benzodiazepines and zolpidem (BDZ/Z-drugs) leads to dependency, cognitive impairment, and falls. Although controlled-release melatonin (Melatonin CR) may be an alternative, a switch in clinical settings has proven difficult. We investigated the factors associated with successful switch to Melatonin CR in patients with major depressive disorder (MDD) and insomnia. METHODS: This retrospective observational study involved 170 patients diagnosed with MDD and insomnia, and aged older than 55 years, who were treated with BDZ/Z-drug for at least the past 90 days and never before exposed to Melatonin CR. All patients were treated with a standard antidepressant therapy and Melatonin CR for their insomnia. A successful switch was defined as three or more consecutive prescriptions of Melatonin CR separated by at least one-month interval, after discontinuation of the BDZ/Z-drug. RESULTS: Seventy-nine patients (46.5%) who switched successfully showed no significant differences in sex, age, education, and occupational status compared with the unsuccessful group. The types of antidepressants used or BDZ/Z-drug treatment did not differ significantly between the two groups. Fewer somatic symptoms were observed in the successful group. In the multivariate analysis, the successful group showed significantly less somatic anxiety, shorter duration from first BDZ/Z-drug use to the first antidepressant use, and shorter total duration of BDZ/Z-drug therapy. CONCLUSIONS: A successful switch from BDZ/Z-drug to Melatonin CR was associated with less baseline somatic anxiety, earlier use of antidepressants, and shorter total duration of BDZ/Z-drug use, but was less strongly associated with the type of antidepressants in MDD patients with insomnia.

Development of a Novel Controlled-Release Tablet of Pregabalin: Formulation Variation and Pharmacokinetics in Dogs and Humans.

BACKGROUND: Novel three-layered (TL) tablet systems were compared with both monolithic matrix (MM) formulations and a commercial immediate-release (IR) capsule to develop once-a-day (OAD) pregabalin tablets. METHODS: The physical properties of the TL tablets, including dissolution and swelling rates, were compared with those of the MM tablets and the pharmacokinetic parameters of the TL tablet were compared with those of an IR capsule in beagles and humans. RESULTS: Our results indicated that the same amount of a hydrophilic polymer in the formulations had similar dissolution profiles at 12 h, regardless of the tablet geometry. However, the degree of tablet swelling differed, with larger amounts of polymer in the tablets showing a greater degree of swelling. In addition, TL tablets swelled more rapidly compared with MM tablets. For the pharmacokinetic study of the TL tablet, the beagles demonstrated absorption results similar to those of an IR capsule, whereas the humans demonstrated low total absorption compared with an IR capsule. The time of the peak plasma concentration at 6 h in the fed state of humans coincided with the results of the study on beagles. CONCLUSION: The novel TL tablet system of pregabalin may prove to be helpful in developing improved formulations with better continuous drug absorption for OAD administration.

Data management and processing workflow for the Materials Physics and Engineering group beamlines at the Advanced Photon Source.

The ability to store, organize, process and distribute experimental data effectively, efficiently and securely is particularly important for large user facilities like the Advanced Photon Source. In this article, the deployment of the APS Data Management System (DM) at the 1-ID and 6-BM beamlines of the APS is described. These two beamlines support a wide range of experimental techniques and generate data at relatively high rates, making them ideal candidates to illustrate the deployment and customization of the DM system and its tools. Using several usage examples at these beamlines, various capabilities of the DM system are described.

Demonstration of a chamber for strain mapping of steel specimens under mechanical load in a hydrogen environment by synchrotron radiation.

We demonstrate a hydrogen gas chamber suitable for lattice strain measurements and capturing radiographs of a steel specimen under a mechanical load using high energy synchrotron x-rays. The chamber is suitable for static and cyclic mechanical loading. Experiments were conducted at the 1-ID-E end station of the Advanced Photon Source, Argonne National Laboratory. Diffraction patterns show a high signal-to-noise ratio suitable for lattice strain measurements for the specimen and with minimal scattering and overlap from the gas chamber manufactured from aluminum. In situ radiographs of a specimen in the hydrogen chamber show the ability to track a growing crack and to map the lattice strain around the crack with high spatial and strain resolution.

Risk Factor Analysis for Poor Outcomes in Supraorbital Keyhole Aneurysm Clipping for Ruptured Anterior Circulation Aneurysms.

BACKGROUND: The transciliary keyhole approach has been actively employed for unruptured intracranial aneurysms in many institutions, although applying this technique to ruptured aneurysms remains controversial. We investigated risk factors related to poor surgical outcomes in ruptured aneurysms and attempted to clarify the differences between conventional craniotomy and keyhole surgery. METHODS: A retrospective review was performed at a single institution of medical records and images from surgeries of 188 patients who underwent keyhole surgery for ruptured anterior circulation aneurysms between July 2007 and February 2015. RESULTS: The study included 116 (62%) female and 72 (38%) male patients; age range was 23-86 years. Preoperative clinical grades were good in almost all patients except for a few patients with poor clinical grades. Mean aneurysm size was 5.5 mm, and the most common aneurysm location was the anterior communicating artery (n = 82). Most patients (n = 158; 91.5%) showed good clinical outcomes. Univariate analysis of risk factors associated with poor-grade outcomes after 3 months was performed. Hunt and Hess grade (odds ratio [OR] 13.50, P < 0.0001), World Federation of Neurosurgical Societies scale (OR 7.69, P < 0.0001), aneurysm size (OR 1.21, P = 0.019), and vasospasm (OR 6.43, P = 0.0003) were statistically significant, whereas Fisher grade, skin-to-skin time (operation time), rebleeding, and ventricle puncture were not statistically significant. CONCLUSIONS: Because incidence of poor surgical outcome of keyhole surgery is not different from known conventional craniotomy, this approach is an acceptable treatment option in a good-grade ruptured anterior circulation aneurysm.

Dynamic localization of HmpF regulates type IV pilus activity and directional motility in the filamentous cyanobacterium Nostoc punctiforme.

Many cyanobacteria exhibit surface motility powered by type 4 pili (T4P). In the model filamentous cyanobacterium Nostoc punctiforme, the T4P systems are arrayed in static, bipolar rings in each cell. The chemotaxis-like Hmp system is essential for motility and the coordinated polar accumulation of PilA on cells in motile filaments, while the Ptx system controls positive phototaxis. Using transposon mutagenesis, a gene, designated hmpF, was identified as involved in motility. Synteny among filamentous cyanobacteria and the similar expression patterns for hmpF and hmpD imply that HmpF is part of the Hmp system. Deletion of hmpF produced a phenotype distinct from other hmp genes, but indistinguishable from pilB or pilQ. Both an HmpF-GFPuv fusion protein, and PilA, as assessed by in situ immunofluorescence, displayed coordinated, unipolar localization at the leading pole of each cell. Reversals were modulated by changes in light intensity and preceded by the migration of HmpF-GFPuv to the lagging cell poles. These results are consistent with a model where direct interaction between HmpF and the T4P system activates pilus extension, the Hmp system facilitates coordinated polarity of HmpF to establish motility, and the Ptx system modulates HmpF localization to initiate reversals in response to changes in light intensity.