Efficacy and safety of biosimilar trastuzumab (CT-P6) in routine clinical practice in the Republic of Korea: a real-world post-marketing surveillance study.

BACKGROUND: The trastuzumab biosimilar CT-P6 is approved for human epidermal growth factor receptor 2 (HER2)-positive early breast cancer (EBC), metastatic breast cancer (MBC), and metastatic gastric cancer (MGC). The objective of this post-marketing surveillance (PMS) study was to evaluate the real-world safety and effectiveness of CT-P6 in patients with HER2-positive cancers. RESEARCH DESIGN AND METHODS: This open-label, observational, prospective, PMS study collected data via investigator surveys from 35 centers in the Republic of Korea (5 October 2018-4 October 2022). Eligible patients with HER2-positive EBC, MBC, or MGC started CT-P6 treatment during routine clinical practice, followed by 1-year observation. Evaluations included adverse events (AEs), adverse drug reactions (ADRs), and effectiveness. RESULTS: Safety was analyzed in 642 patients (494 EBC, 94 MBC, 54 MGC). Overall, 325 (50.6%) patients experienced 1316 AEs, and 550 ADRs occurred in 199 (31.0%) patients. Unexpected ADRs occurred in 62 (9.7%) patients. Unexpected ADRs and ADRs of special interest did not raise any new safety signals. Among trastuzumab-naïve patients, 34/106 (32.1%) with EBC achieved pathological complete response; 30/74 (40.5%) MBC and 24/49 (49.0%) MGC patients achieved complete or partial response. CONCLUSIONS: In a real-world setting, CT-P6 demonstrated safety and efficacy findings consistent with previous CT-P6 studies.

Selective removal of radioactive iodine from water using reusable Fe@Pt adsorbents.

Environmental damage from serious nuclear accidents should be urgently restored, which needs the removal of radioactive species. Radioactive iodine isotopes are particularly problematic for human health because they are released in large amounts and retain radioactivity for a substantial time. Herein, we prepare platinum-coated iron nanoparticles (Fe@Pt) as a highly selective and reusable adsorbent for iodine species, i.e., iodide (I-), iodine (I2), and methyl iodide (CH3I). Fe@Pt selectively separates iodine species from seawater and groundwater with a removal efficiency ≥ 99.8%. The maximum adsorption capacity for the iodine atom of all three iodine species was determined to be 25 mg/g. The magnetic properties of Fe@Pt allow for the facile recovery and reuse of Fe@Pt, which remains stable with high efficiency (97.5%) over 100 uses without structural and functional degradation in liquid media. Practical application to the removal of radioactive 129I and feasibility for scale-up using a 20 L system demonstrate that Fe@Pt can function as a reusable adsorbent for the selective removal of iodine species. This systematic procedure is a standard protocol for designing highly active adsorbents for the clean separation and removal of various chemical species dissolved in wastewater.

Electrochemical Formation of Divalent Samarium Cation and Its Characteristics in LiCl-KCl Melt.

The electrochemical reduction of trivalent samarium in a LiCl-KCl eutectic melt produced highly stable divalent samarium, whose electrochemical properties and electronic structure in the molten salt were investigated using cyclic voltammetry, UV-vis absorption spectroscopy, laser-induced emission spectroscopy, and density functional theory (DFT) calculations. Diffusion coefficients of Sm2+ and Sm3+ were electrochemically measured to be 0.92 × 10-5 and 1.10 × 10-5 cm2/s, respectively, and the standard apparent potential of the Sm2+/3+ couple was estimated to be -0.82 V vs Ag|Ag+ at 450 °C. The spectroelectrochemical study demonstrated that the redox behavior of the samarium cations obeys the Nernst equation ( E°' = -0.83 V, n = 1) and the trivalent samarium cation was successfully converted to the divalent cation having characteristic absorption bands at 380 and 530 nm with molar absorptivity values of 1470 and 810 M-1 cm-1, respectively. Density function theory calculations for the divalent samarium complex revealed that the absorption signals originated from the 4f6 to 4f55d1 transitions. Additionally, laser-induced emission measurements for the Sm cations in the LiCl-KCl matrix showed that the Sm3+ ion in the LiCl-KCl melt at 450 °C emitted an orange color of fluorescence, whereas a red colored emission was observed from the Sm2+ ion in the solidified LCl-KCl salt at room temperature.

Enhancing Intervention for Residual Rhotic Errors Via App-Delivered Biofeedback: A Case Study.

Purpose: Recent research suggests that visual-acoustic biofeedback can be an effective treatment for residual speech errors, but adoption remains limited due to barriers including high cost and lack of familiarity with the technology. This case study reports results from the first participant to complete a course of visual-acoustic biofeedback using a not-for-profit iOS app, Speech Therapist's App for /r/ Treatment. Method: App-based biofeedback treatment for rhotic misarticulation was provided in weekly 30-min sessions for 20 weeks. Within-treatment progress was documented using clinician perceptual ratings and acoustic measures. Generalization gains were assessed using acoustic measures of word probes elicited during baseline, treatment, and maintenance sessions. Results: Both clinician ratings and acoustic measures indicated that the participant significantly improved her rhotic production accuracy in trials elicited during treatment sessions. However, these gains did not transfer to generalization probes. Conclusions: This study provides a proof-of-concept demonstration that app-based biofeedback is a viable alternative to costlier dedicated systems. Generalization of gains to contexts without biofeedback remains a challenge that requires further study. App-delivered biofeedback could enable clinician-research partnerships that would strengthen the evidence base while providing enhanced treatment for children with residual rhotic errors. Supplemental Material: https://doi.org/10.23641/asha.5116318.

Validation of the Korean Version of the Manchester-Oxford Foot Questionnaire in Patients With Hallux Valgus.

The Manchester-Oxford Foot Questionnaire (MOXFQ) is a practical, reliable, and valid questionnaire for hallux valgus surgery and has been translated into several languages. However, the MOXFQ has not been translated into Korean. In the present study, we aimed to translate and evaluate the validity and reliability of the Korean version of the MOXFQ for patients affected by hallux valgus. In accordance with the guidelines of cross-cultural adaptation, we translated the English version of MOXFQ into Korean and then backward translated it into English. We sent out letters that included the Korean version of the MOXFQ, a visual analog scale measure of pain, and a validated Korean version of the short-form 36-item Health Survey to 135 patients with hallux valgus. A retest was administered after 2 weeks. Of the 135 patients, 104 responded to the first questionnaire, and 82 of the first-time responders returned their second questionnaires. We evaluated the test-retest reliability, internal consistency, concurrent validity, and construct validity of the Korean version of the MOXFQ. The intraclass correlation coefficient for test-retest reliability was 0.82 for the total MOXFQ and ranged from 0.81 to 0.82 for the 3 subscales. Cronbach's alpha for the total MOXFQ was 0.85 and ranged from 0.8 to 0.92 for the 3 subscales. Concurrent and construct validity was supported by significant correlation with the visual analog scale and short-form 36-item Health Survey subscale scores. The Korean version of the MOXFQ was tested, and it was found to be a valid and reliable instrument for patients with hallux valgus.

Reliability and Validity of the Korean Version of the Foot Function Index.

Although translated versions of the Foot Function Index (FFI) in several languages are available, the absence of a Korean version has precluded comparing the data from Korea with the data from other countries using the FFI. We, therefore, evaluated the reliability and validity of the adapted Korean version of the FFI. We translated the English version of the FFI into Korean and back into English. We mailed the Korean version of the visual analog scale, FFI, and the previously validated Medical Outcomes Study Short-Form 36-item questionnaire (SF-36) to 121 patients with treated foot complaints. To evaluate the test-retest reliability and internal consistency, we used the intraclass correlation coefficient and Cronbach's α, respectively. We also evaluated the concurrent and construct validity of Korean version of the FFI by comparing the visual analog scale and SF-36. Cronbach's α was 0.91 and 0.95 for the pain and disability subscales, respectively. The reproducibility was good, and a strong correlation between the FFI and the SF-36 and visual analog scale with related content was observed, indicating good construct validity.The Korean version of the FFI is a reliable and valid questionnaire for the self-assessment of pain and disability in Korean patients with foot complaints.

Snail-like Particles from Compartmentalized Microfibers.

Electrohydrodynamic cojetting has been employed to synthesize compartmentalized microfibers from thermally responsive hydrogels. The synthesis of the hydrogels as well as their transformation into compartmentalized microcylinders is discussed. After programmable shape-shifting, snail-like particles are obtained that undergo functional and structural reconfiguration in response to a change in temperature.

Hapticity-dependent charge transport through carbodithioate-terminated [5,15-bis(phenylethynyl)porphinato]zinc(II) complexes in metal-molecule-metal junctions.

Single molecule break junction experiments and nonequilibrium Green's function calculations using density functional theory (NEGF-DFT) of carbodithioate- and thiol-terminated [5,15-bis(phenylethynyl)-10,20-diarylporphinato]zinc(II) complexes reveal the impact of the electrode-linker coordination mode on charge transport at the single-molecule level. Replacement of thiolate (-S(-)) by the carbodithioate (-CS2(-)) anchoring motif leads to an order of magnitude increase of single molecule conductance. In contrast to thiolate-terminated structures, metal-molecule-metal junctions that exploit the carbodithioate linker manifest three distinct conductance values. We hypothesize that the magnitudes of these conductances depend upon carbodithoate linker hapticity with measured conductances across Au-[5,15-bis(4'-(dithiocarboxylate)phenylethynyl)-10,20-diarylporphinato]zinc(II)-Au junctions the greatest when both anchoring groups attach to the metal surface in a bidentate fashion. We support this hypothesis with NEGF-DFT calculations, which consider the electron transport properties for specific binding geometries. These results provide new insights into the origin of molecule-to-molecule conductance heterogeneity in molecular charge transport measurements and the factors that optimize electrode-molecule-electrode electronic coupling and maximize the conductance for charge transport.

Spatioselective growth of metal-organic framework nanocrystals on compositionally anisotropic polymer particles.

Selective growth of metal organic framework materials on the surface of compartmentalized polymer microparticles is achieved by electro-hydrodynamic co-jetting, selective surface modification, and anisotropic crystal growth.

Multimodal delivery of irinotecan from microparticles with two distinct compartments.

In the last several decades, research in the field of drug delivery has been challenged with the fabrication of carrier systems engineered to deliver therapeutics to the target site with sustained and controlled release kinetics. Herein, we report the fabrication of microparticles composed of two distinct compartments: i) one compartment containing a pH responsive polymer, acetal-modified dextran, and PLGA (polylactide-co-glycolide), and ii) one compartment composed entirely of PLGA. We demonstrate the complete release of dextran from the microparticles during a 10-hour period in an acidic pH environment and the complete degradation of one compartment in less than 24h. This is in congruence with the stability of the same microparticles in neutral pH over the 24-hour period. Such microparticles can be used as pH responsive carrier systems for drug delivery applications where their cargo will only be released when the optimum pH window is reached. The feasibility of the microparticle system for such an application was confirmed by encapsulating a cancer therapeutic, irinotecan, in the compartment containing the acetal-modified dextran polymer and the pH dependent release over a 5-day period was studied. It was found that upon pH change to an acidic environment, over 50% of the drug was first released at a rapid rate for 10h, similar to that observed for the dextran release, before continuing at a more controlled rate for 4 days. As such, these microparticles can play an important role in the fabrication of novel drug delivery systems due to the selective, controlled, and pH responsive release of their encapsulated therapeutics.

Janus-core and shell microfibers.

Janus microcylinders composed of different polymers were prepared through coaxial co-jetting with dual-core flows, followed by cross-linking, microsectioning, and shell removal. Uniquely shaped building blocks can be fabricated by photo-patterning of one hemisphere of the microcylinders.

Exploiting plasmon-induced hot electrons in molecular electronic devices.

Plasmonic nanostructures can induce a number of interesting responses in devices. Here we show that hot electrons can be extracted from plasmonic particles and directed into a molecular electronic device, which represents a new mechanism of transfer from light to electronic transport. To isolate this phenomenon from alternative and sometimes simultaneous mechanisms of plasmon-exciton interactions, we designed a family of hybrid nanostructure devices consisting of Au nanoparticles and optoelectronically functional porphyin molecules that enable precise control of electronic and optical properties. Temperature- and wavelength-dependent transport measurements are analyzed in the context of optical absorption spectra of the molecules, the Au particle arrays, and the devices. Enhanced photocurrent associated with exciton generation in the molecule is distinguished from enhancements due to plasmon interactions. Mechanisms of plasmon-induced current are examined, and it is found that hot electron generation can be distinguished from other possibilities.

Photoswitchable particles for on-demand degradation and triggered release.

On-demand degradable polymer particles are fabricated via electrospraying of a solution of acetal-protected dextran that further includes 2-(4-methoxystyryl)-4,6-bis(trichloromethyl)-1,3,5-triazine as a photoacid generator. The illumination of UV light gives rise to photoacid and activates the catalytic deprotection of hydroxyl groups of dextran, leading to controlled dissolution of the microparticles in water.

Electronic transport in porphyrin supermolecule-gold nanoparticle assemblies.

Temperature-dependent transport of hybrid structures consisting of gold nanoparticle arrays functionalized by conjugated organic molecules [(4'-thiophenyl)ethynyl-terminated meso-to-meso ethyne-bridged (porphinato)zinc(II) complexes] that possess exceptional optical and electronic properties was characterized. Differential conductance analysis distinguished the functional forms of the temperature and voltage dependences for a range of sample particles and molecular attachments. Thermally assisted tunneling describes transport for all cases and the associated mechanistic parameters can be used to determine the relative roles of activation energy, work function, and so forth. These results provide the basis on which to examine plasmon-influenced conduction in hybrid systems.

Quasi-ohmic single molecule charge transport through highly conjugated meso-to-meso ethyne-bridged porphyrin wires.

Understanding and controlling electron transport through functional molecules are of primary importance to the development of molecular scale devices. In this work, the single molecule resistances of meso-to-meso ethyne-bridged (porphinato)zinc(II) structures (PZn(n) compounds), connected to gold electrodes via (4'-thiophenyl)ethynyl termini, are determined using scanning tunneling microscopy-based break junction methods. These experiments show that each α,ω-di[(4'-thiophenyl)ethynyl]-terminated PZn(n) compound (dithiol-PZn(n)) manifests a dual molecular conductance. In both the high and low conductance regimes, the measured resistance across these metal-dithiol-PZn(n)-metal junctions increases in a near linear fashion with molecule length. These results signal that meso-to-meso ethyne-bridged porphyrin wires afford the lowest ß value (ß = 0.034 Å(-1)) yet determined for thiol-terminated single molecules that manifest a quasi-ohmic resistance dependence across metal-dithiol-PZn(n)-metal junctions.

Highly dispersed palladium(II) in a defective metal-organic framework: application to C-H activation and functionalization.

High reversibility during crystallization leads to relatively defect-free crystals through repair of nonperiodic inclusions, including those derived from impurities. Microporous coordination polymers (MCPs) can achieve a high level of crystallinity through a related mechanism whereby coordination defects are repaired, leading to single crystals. In this work, we discovered and exploited the fact that this process is far from perfect for MCPs and that a minority ligand that is coordinatively identical to but distinct in shape from the majority linker can be inserted into the framework, resulting in defects. The reaction of Zn(II) with 1,4-benzenedicarboxylic acid (H(2)BDC) in the presence of small amounts of 1,3,5-tris(4-carboxyphenyl)benzene (H(3)BTB) leads to a new crystalline material, MOF-5(O(h)), that is nearly identical to MOF-5 but has an octahedral morphology and a number of defect sites that are uniquely functionalized with dangling carboxylates. The reaction with Pd(OAc)(2) impregnates the metal ions, creating a heterogeneous catalyst with ultrahigh surface area. The Pd(II)-catalyzed phenylation of naphthalene within Pd-impregnated MOF-5(O(h)) demonstrates the potential utility of an MCP framework for modulating the reactivity and selectivity of such transformations. Furthermore, this novel synthetic approach can be applied to different MCPs and will provide scaffolds functionalized with catalytically active metal species.

Compartmentalized photoreactions within compositionally anisotropic Janus microstructures.

We demonstrate spatially controlled photoreactions within bicompartmental microparticles and microfibers. Selective photoreactions are achieved by anisotropic incorporation of photocrosslinkable poly(vinyl cinnamate) in one compartment of either colloids or microfibers. Prior to photoreaction, bicompartmental particles, and fibers were prepared by EHD co-jetting of two compositionally distinct polymer solutions. Physical and chemical anisotropy was confirmed by confocal laser scanning microscopy, Fourier-transformed infrared spectroscopy, and scanning electron microscopy. The data indicate adjustment of polymer concentrations of the jetting solutions to be the determining factors for particle and fiber structures. Subsequent exposure of poly(vinyl cinnamate)-based particles and fibers to UV light at 254 nm resulted in spatially controlled crosslinking. Treatment of the crosslinked bicompartmental colloids with chloroform produced half-moon shaped objects. These hemishells exhibited a distinct porous morphology with pore sizes in the range of 70 nm. Based on this novel synthetic approach, Janus-type particles and fibers can be prepared by EHD co-jetting and can be selectively photocrosslinked without the need for masks or selective laser writing.

Gas and liquid phase adsorption in isostructural Cu3[biaryltricarboxylate]2 microporous coordination polymers.

N-Heteroarene substitution into biphenyl-based linkers enhances the uptake of electron-rich organosulfur molecules in a series of isostructural microporous coordination polymers.