Design and synthesis of bio-based UV curable PU acrylate resin from itaconic acid for coating applications.

UV curable PUA resin was successfully synthesized from polyol based on sustainable resource originated from itaconic acid (IA), isophorone diisocyanate (IPDI) and 2-hydroxyethyl methacrylate (HEMA). A polyol was synthesized by condensation reaction of IA with 16-hexanediol in the presence of p-Toluenesulfonic acid (pTSA). The synthesized PUA resin was characterized for its structural elucidation by using Fourier Transform Infrared Spectrophotometer (FTIR), 1H and 13C NMR spectroscopy. The synthesized UV curable PUA resin was incorporated in varying concentrations in conventional PUA coating system. The effects of varying concentration of synthesized UV curable PUA resin on rheology, crystallinity, thermal and coating properties were evaluated. The rheological behavior of the resins were evaluated at variable stress and result showed decrease in viscosity of resin as concentration of synthesized UV curable PUA resin increases in conventional PUA resin. The cured coatings have been evaluated for glass transition temperature (Tg) and thermal behavior by differential scanning calorimeter and thermogravimetric analysis respectively. The degree of crystallinity of the coatings was determined from X-ray diffraction patterns using the PFM program. It was found that increase in the mass proportion of IA based PUA in coatings, the coating becomes more rigid and crystalline. The synthesized UV curable PUA coatings showed interesting mechanical, chemical, solvent and thermal properties as compared to the conventional PUA. Further, cured coatings were also evaluated for gel content and water absorption.

Studies on characterization of bioflocculant exopolysaccharide of Azotobacter indicus and its potential for wastewater treatment.

Partially characterized bioflocculant exopolysaccharide (EPS) produced from an Azotobacter indicus ATCC 9540 strain reported in our previous study was further characterized, and its flocculant potential was investigated at different pH, temperature, and cations concentrations. Flocculant activity at different concentrations of EPS in the absence of cations was reanalyzed by slight modified flocculant assay. It revealed that flocculant activity increased in a concentration-dependent manner up to a certain limit, with the maximum flocculation of 72% at 500 mg L⁻¹ EPS concentration, even in the absence of cations. At the concentration of 10 mg L⁻¹, CaCl2 showed more significant activity (92%) than AlCl3 and MnSO4. Differential scanning calorimetry study and flocculant assay revealed high temperature stability of EPS up to 97 °C. Molecular weight of the EPS determined by size exclusion chromatography was found to be approximately 2 x 106 kDa. Investigation on flocculation efficacy of the characterized EPS for wastewater treatment of dairy, woolen, starch, and sugar industry suggested it to be effective and stable at wide pH range of 5-10. Wastewater treatment with biopolymer at 500 mg L⁻¹ showed reduction in biochemical oxygen demand (38-80%), chemical oxygen demand (37-79%), and suspended solids (41-68%). This study suggests that Azotobacter polymer has high potential in wastewater treatment as bioflocculant and can be used as a potential alternative to chemical flocculants.

Bioflocculant exopolysaccharide production by Azotobacter indicus using flower extract of Madhuca latifolia L.

Efficacy of Azotobacter indicus ATCC 9540 strain for production exopolysaccharide (EPS) bioflocculant was investigated. Mahua flower extract (Madhuca latifolia L), a natural substrate at the concentration of 20 g L(-1), gave maximum recovery of EPS followed by sucrose and mannitol as compared to other carbon sources after 172 h. Yeast extract was found to be the most effective nitrogen source as compared to beef extract, sodium nitrate, ammonium sulfate, casein hydrolysate, and urea for the production of EPS. EPS production was increased in presence of nitrogen (5.51 g L(-1)) as compared to nitrogen-free medium (3.51 g L(-1)), and fermentation time was also reduced by 28 h. Maximum EPS production (6.10 g L(-1)) was found in the presence of 20 g L(-1) flower extract and 0.5 g L(-1) yeast extract containing Ashby's media with 180 rpm at 30 degrees C at 144 h, under controlled conditions in 2.5 L fermenter using optimized medium. The isolated EPS showed cation-dependent flocculating activity. Concentration of EPS played an important role in bioflocculating activity which increased in a concentration-dependent manner up to a certain limit, with the maximum flocculation of 72% at 500 mg L(-1) concentration but remained almost static after this concentration. Extracted polymer was characterized by different chemical tests, FT-IR spectroscopy, and TLC which showed presence of uronic acids, O-acetyl groups, and Orcinol with suggestive indication of alginate like polymer. This study suggests that use of M. latifolia L. flowers can be a potential alternative bioresource for production of exopolysaccharide.