ABSTRACT
Polysaccharide based copolymers have been the focus of several research, particularly for the development of drug delivery systems. This study reports on the preparation of nanoparticles from an amphiphilic copolymer obtained by the poly(ε-caprolactone) graft in the structure of cashew gum, via ring-opening polymerization. The synthesis of copolymers was confirmed by Fourier transform infrared spectroscopy and nuclear magnetic resonance. The copolymers exhibit self-organization capability in water, with critical association concentration of 42 and 50 µg mL-1. The nanoparticle hydrodynamic diameters (212 and 202 nm) revealed a decreasing trend with increasing poly(ε-caprolactone) graft percentage. Epirubicin was used as an anticancer drug model and incorporated into the nanoparticles. The encapsulation efficiency reached 50% and 5.0% drug load. Nanoparticles showed an epirubicin controlled release profile, with maximum release of 93.0 ± 4.0% in 72 h, as well as excellent biocompatibility, according to hemolysis and cytotoxicity assays.
Subject(s)
Antineoplastic Agents/pharmacology , Drug Carriers/chemistry , Epirubicin/pharmacology , Nanoparticles/chemistry , Plant Gums/chemistry , Polyesters/chemistry , Anacardium/chemistry , Animals , Humans , MCF-7 Cells , MiceABSTRACT
Aminated poly(N-isopropylacrylamide) (PNIPAm-NH2) was grafted onto oxidized galactomannan polysaccharide extracted from Delonix regia (OXGM) via Schiff base reaction by a simple, rapid synthetic route, deprived of the use of organic solvents. Grafting was confirmed by FTIR and 1H NMR and the self-organizing ability of the obtained nanoparticle copolymers was investigated by dynamic light scattering (DLS). The minimum concentration required for self-organization (CAC) at 25 °C was higher than at 50 °C. Lower critical solution temperature (LCST) was in the range 34-40 °C, depending on both inserted PNIPAm-NH2 molar mass and on the presence of reduced imine bond. Synthesized copolymers are promising candidates for drug delivery as they show good cell viability, particle size around 250 nm and transition temperature closer to that of human body. Reaction success points out to the possibility of use free aldehyde groups of oxidized polysaccharide, not used in the copolymerization, to form a pro-drug with substances that possess NH2 groups in their structure, such as doxorubicin.
Subject(s)
Acrylic Resins/chemistry , Biocompatible Materials/chemical synthesis , Fabaceae/chemistry , Mannans/chemistry , Galactose/analogs & derivatives , Polymerization , Schiff Bases/chemistry , Seeds/chemistry , Transition TemperatureABSTRACT
Chitosan (CH) was N-alkylated via Schiff base formation and further reduced via sodium borohydride. The reaction was carried out at room temperature, in a homogeneous aqueous medium, using as a source of alkyl group an essential oil (Eucalyptus staigeriana) containing an unsaturated aldehyde (3,7-dimethylocta-2,6-dienal). Derivatives were characterized by Infrared Spectroscopy, proton and carbon Nuclear Magnetic Resonance, XRD, particle size distribution and zeta potential. Chitosan hydrophobization evidence was given by FTIR as new bands at 2929 cm-1 due to methyl groups, along with the presence of strong band at 1580 cm-1 owing to N substitution. Moreover, carbon and proton NMR corroborated the insertion of methyl groups in chitosan backbone. The degree of substitution was found to be in the range 0.69-1.44. X-ray diffractograms revealed that the insertion of alkyl substituents in chitosan backbone led to a less crystalline material. Data from antibacterial activity revealed that chitosan and derivatives were effective against Gram-positive bacteria, whereby derivatives exhibited greater inhibitory effect than CH. Derivatives are likely candidates for use as carriers for active principles of interest of food, pharmacy and medicine.
Subject(s)
Chitosan/chemistry , Alkylation , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Borohydrides/chemistry , Gram-Positive Bacteria/drug effects , Magnetic Resonance Spectroscopy/methods , Microbial Sensitivity Tests/methods , Oils, Volatile/chemistry , Schiff Bases/chemistry , Spectroscopy, Fourier Transform Infrared/methods , X-Ray Diffraction/methodsABSTRACT
In order to synthesize nanoparticles of galactomannan-g-poly-N-isopropylacrylamide copolymers, galactomannan from fava d'anta was partially hydrolyzed using hydrochloric acid. Degradation reduced the molar mass and increase mannose/galactose molar ratio. This study shows that high molar mass of galatomannan lead to formation of copolymers with particle size in the order of micrometer, however reducing molar mass from 106 to 104 g mol-1, thermo-sensitive copolymer with low critical aggregation concentration, transition temperature close to body temperature (37 °C) and particle size in the range of 300-170 nm can be obtained. As a proof of concept, partially degraded galactomannan-g-NIPAm copolymer was used to incorporated indomethacin. Good encapsulation efficiency and a controlled release were observed indicating that this material has potential to be used as nanocarrier system.
Subject(s)
Acrylic Resins , Mannans/chemistry , Molecular Weight , Particle Size , Galactose/analogs & derivatives , Hydrolysis , Nanoparticles/chemistry , Polymers/chemistry , Spectrum AnalysisABSTRACT
Amphotericin B is an antibiotic used in the treatment of fungal disease and leishmania; however, it exhibits side effects to patients, hindering its wider application. Therefore, nanocarriers have been investigated as delivery systems for amphotericin B (AMB) in order to decrease its toxicity, besides increase bioavailability and solubility. Amphiphilic copolymers are interesting materials to encapsulate hydrophobic drugs such as AMB, hence copolymers of cashew gum (CG) and l-lactide (LA) were synthesized using two different CG:LA molar ratios (1:1 and 1:10). Data obtained revealed that copolymer nanoparticles present similar figures for particle sizes and zeta potentials; however, particle size of encapsulated AMB increases if compared to unloaded nanoparticles. The 1:10 nanoparticle sample has better stability although higher polydispersity index (PDI) if compared to 1:1 sample. High amphotericin (AMB) encapsulation efficiencies and low hemolysis were obtained. AMB loaded copolymers show lower aggregation pattern than commercial AMB solution. AMB loaded nanoparticles show antifungal activities against four C. albicans strains. It can be inferred that cashew gum/polylactide copolymers have potential as nanocarrier systems for AMB.
Subject(s)
Amphotericin B/chemistry , Drug Delivery Systems , Nanoparticles/chemistry , Polyesters/chemistry , Anacardium , Antifungal Agents/pharmacology , Candida albicans , Erythrocytes/drug effects , Hemolysis/drug effects , Humans , In Vitro Techniques , Magnetic Resonance Spectroscopy , Microbial Sensitivity Tests , Particle Size , Spectrophotometry, Infrared , Spectroscopy, Fourier Transform InfraredABSTRACT
This work was aimed at the production and characterization of a new nanocarrier based on a Sterculia striata polysaccharide (SSP) modified via acylation reaction with propionic anhydride. Nanocapsules of propionated SSP (PSSP) were produced via spontaneous nanoemulsification process and tested as a potential amphotericin B (AMB) nanocarrier. Stable nanoparticles with a very low polydispersity index (0.08-0.29) and high zeta potential (ζ -42.7 to -53.8 mV) were obtained. Particle size was dependent on the degree of substitution and ranged from 205 to 286 nm. A nanocapsule with a degree of substitution (DS) of 2.53 (NCP 2.53) was selected for encapsulation, biocompatibility, and antifungal evaluation against Candida albicans strains. A maximum of 98.3% AMB encapsulation was achieved. Encapsulated AMB was in its monomeric form and showed good biocompatibility and antifungal activity against four C. albicans strains. Data indicate that PSSP has potential as a nanocarrier system for AMB.
Subject(s)
Amphotericin B/pharmacology , Drug Carriers/chemistry , Nanoparticles/chemistry , Polysaccharides/chemistry , Propionates/chemistry , Sterculia/chemistry , Antifungal Agents/pharmacology , Biocompatible Materials/chemistry , Candida albicans/drug effects , Drug Liberation , Hemolysis/drug effects , Humans , Microbial Sensitivity Tests , Nanocapsules/chemistry , Particle Size , Spectrophotometry, Ultraviolet , Spectroscopy, Fourier Transform InfraredABSTRACT
Polysaccharide nanoparticles with potential to stabilize Pickering emulsions have been recently object of many research. Acetylated cashew gum with different degrees of substitution has been used in this work, in the pursuit of obtaining stable Pickering emulsions. Acetylated cashew gum was characterized by infrared and nuclear resonance spectroscopy. Effects of cashew gum derivative acetyl content, droplet size, ionic strength, zeta potential on emulsion properties were investigated. As a proof of concept, indomethacin was encapsulated in droplets and its release profile determined. Data obtained revealed droplet sizes in the range 269-312â¯nm, with unimodal size distribution and zeta potential values from -46 Mv to -48 Mv. Encapsulation efficiencies were in the range 26-52%, a steady release profile reached in 3â¯h, releasing maximal 75% IND.
Subject(s)
Anacardium/chemistry , Drug Carriers/chemistry , Indomethacin/chemistry , Nanoparticles/chemistry , Plant Gums/chemistry , Acetylation , Drug Liberation , Emulsions , Particle SizeABSTRACT
Cashew gum (GC) is a polysaccharide whose structural modification has the potential to extend its applications on varied fields such as to the formation of self-organized nanoparticulated systems. In this work, a 23 factorial design was carried out, aiming at evaluation of the influence of the reactional parameters of an acetylation reaction on the final properties of cashew gum. The effects of temperature, reaction time and amount of acetylating agent on the reaction yield and degree of GC acetylation were investigated. Data obtained revealed that the aforementioned parameters influenced both yield and degree of acetylation. Statistical analysis showed that the different derivatives had their variables influenced mainly by temperature and interaction effect between the factors time and quantity of acetylating agent. Acetylated derivatives were obtained with yield higher than 90% and degrees of acetylation above 2.42. Data on the formation of self-organized systems, revealed particle sizes in the range 190-300nm, where smaller particle sizes were obtained for derivatives with acetylation degrees lower than 1.5. Release profiles of Amphotericin-B incorporated in derivative nanoparticles, yielded 70% encapsulation efficiency and long release profiles, corroborating their potential application to delivery of hydrophobic active principles.
Subject(s)
Amphotericin B/chemistry , Chewing Gum/analysis , Acetylation , Amphotericin B/administration & dosage , Amphotericin B/pharmacokinetics , Drug Carriers , Drug Compounding , Drug Liberation , Hydrophobic and Hydrophilic Interactions , Particle Size , Proton Magnetic Resonance Spectroscopy , Spectroscopy, Fourier Transform InfraredABSTRACT
Sustainable control of gastrointestinal nematodes (GIN) in small ruminants has been based on the use of alternative methods, including targeted selective treatment, such as FAMACHA. Another GIN control alternative is the use of herbal medicines, although in many cases their use is based on empirical knowledge. Biopolymer nanoformulations has been investigated to maximize the essential oil effects against sheep gastrointestinal nematodes. The aim of the present study was to combine a Eucalyptus staigeriana essential oil nanoemulsion (EsNano) with FAMACHA as an alternative control for sheep haemonchosis. The study was performed over six months at a commercial sheep farm located in a semiarid region of Northeast Brazil. Initially, a fecal egg count reduction test (FECRT) in sheep with levamisole, ivermectin and oxfendazole in sheep was performed used to determine the most effective anthelmintic to use as the positive control. Levamisole has been selected because it showed efficacy superior to 95%. EsNano was obtained and then its physicochemical properties were characterized. The average (±SE) size of the particles in the nanoemulsion was 276.8 (±12.3) nm with bimodal distribution and polydispersity. Nine visits were performed, from April to September 2013, with an interval of 17 days. One hundred sixty-two male and female sheep were divided into three groups (n=54 each) and were treated when FAMACHA score was 3, 4, or 5: G-EsNano 250mg kg-1 EsNano; G-Lev 7.5mg kg-1 levamisole (positive control), and G-Neg was not treated (negative control). Feces from sheep were collected to quantify the number of eggs per gram of feces (epg) and to identify nematode genera. Sheep weight gain was monitored. The epg data for each group and the average sheep weight gains were analyzed by variance analysis and compared with the Tukey's test (P<0.05). Significant difference between the number of animals treated with EsNano and levamisole was not observed in any visit (P>0.05). The epg variation was similar in the G-EsNano and G-Lev groups on visits (P>0.05), except the second and fifth evaluation in the epg groups were significantly different (P<0.05). Haemonchus spp. was the most prevalent nematode. There was no significant weight gain in any of the treated groups (P<0.05). The combination of phytotherapy and FAMACHA can be an alternative to minimize the use of synthetic anthelmintics to control resistant GIN populations of small ruminants.(AU)
O controle sustentável de nematoides gastrintestinais (NGI) em pequenos ruminantes tem sido baseado na utilização de métodos alternativos, incluindo o tratamento alvo-seletivo, tal como o FAMACHA. Outra alternativa de controle de NGI é o uso de plantas medicinais, embora, em muitos casos, a sua utilização seja baseada no conhecimento empírico. Nanoformulações biopoliméricas tem sido investigadas para maximizar os efeitos de óleos essenciais sobre nematoides gastrointestinais em ovinos. O objetivo do presente estudo foi combinar a nanoemulsão do óleo essencial de Eucalyptus staigeriana (EsNano) com o método FAMACHA como uma alternativa para o controle da hemoncose em ovinos. Este estudo foi realizado ao longo de seis meses em uma fazenda comercial de ovinos localizada em uma região semiárida do Nordeste do Brasil. Inicialmente, um teste de redução da contagem de ovos nas fezes (FECRT) em ovinos com levamisol, ivermectina e oxfendazole foi realizado para determinar o anti-helmíntico mais eficaz, para posterior uso como controle positivo. Levamisol foi selecionado porque mostrou eficácia superior a 95%. EsNano foi obtido e, em seguida, as suas propriedades físico-químicas foram caracterizadas. O tamanho médio (±SE) das partículas na nanoemulsão foi 276,8 (±12,3) nm, com distribuição bimodal e polidispersividade. Foram realizadas nove visitas, de abril a setembro de 2013, com um intervalo de 17 dias. Cento e sessenta e dois ovinos machos e fêmeas foram divididos em três grupos (n=54 cada) e foram tratados quando o FAMACHA foi 3, 4 ou 5: G-EsNano 250 mg kg-1 EsNano; G-Lev 7,5mg kg-1 de levamisol (controlo positivo), e G-Neg não foi tratado (controle negativo). As fezes dos ovinos foram coletadas para quantificar o número de ovos por grama de fezes (opg) e identificar os gêneros de nematóides. O ganho de peso de ovinos foi monitorado. Os dados do opg de cada grupo e os ganhos de peso médio dos ovinos foram analisados por análise de variância e comparadas com o teste de Tukey (P<0,05). Diferença significativa entre o número de animais tratados com EsNano e levamisol não foi observada em nenhuma visita (P>0,05). A variação opg foi semelhante para os grupos G-EsNano e G-Lev nas vistas (P>0,05), excetuando a segunda e quinta avaliação em que os opg dos grupos foram significativamente diferentes (P>0,05). O nematoide Haemonchus spp. foi o mais prevalente. Não houve aumento significativo de peso em qualquer um dos grupos tratados (P>0,05). Assim, a combinação de fitoterapia e FAMACHA pode ser uma alternativa para minimizar o uso anti-helmínticos sintéticos para controlar populações resistentes NGI em pequenos ruminantes.(AU)
Subject(s)
Animals , Eucalyptus/chemistry , Haemonchiasis/drug therapy , Oils, Volatile/therapeutic use , Sheep/parasitology , Chitosan , Emulsions/therapeutic use , Haemonchus , Plants, Medicinal/chemistryABSTRACT
Essential oils have many applications in the pharmaceutical, chemical, and food fields, however, their use is limited to the fact that they are very labile, requiring their a priori encapsulation, aiming to preserve their properties.This work reports on the preparation of chitosan-gum nanoparticles loaded with thymol containing Lippia sidoides essential oil, using exudates of Anacardium Occidentale (cashew gum), Sterculia striata (chichá gum), and Anadenanthera macrocarpa trees (angico gum). Nanoparticles were produced by spray drying an emulsion of L. sidoides essential oil and aqueous solution of gums with different chitosanâ:âgum ratios. Samples were characterized by FTIR and UV/VIS spectroscopy, particle size, volume distribution, and zeta potential. The FTIR spectrum showed the main signals of chitosan and the gums. Data obtained revealed that the samples had sizes in the nano range, varying from 17 nm to 800 nm. The zeta potential varied from + 30 mV to - 40 mV. Nanoparticle loading values varied from 6.7â% to 15.6â%, with an average encapsulating efficiency of 62â%, where the samples with high ratios of cashew gum and chichá gum presented high oil loading values. The data revealed that both the chitosanâ:âgum ratio and polysaccharide characteristics play major roles in nanoencapsulation processes.
Subject(s)
Chitosan , Lippia/chemistry , Nanocapsules , Oils, Volatile , Plant Oils , Nanocapsules/chemistry , Oils, Volatile/chemistry , Plant Gums , Plant Oils/chemistryABSTRACT
Cashew gum (CG) was grafted with N-isopropylacrylamide (NIPA) by radical polymerization to originate a stimuli-sensitive copolymer for drug delivery purposes. NMR and IR spectroscopy confirmed the insertion of NIPA onto the cashew gum chains. The graft copolymer (CG:NIPA) demonstrated thermal responsiveness. The critical aggregation concentration of the copolymers at 25°C was higher than at 50°C. At temperatures lower than the LCST, the nanoparticle size ranged from 12 to 21nm, depending on the CG:NIPA ratio, but above the LCST the particles aggregated, increasing the particle size. Regarding the potential for future oral application, the nanoparticles showed no cytotoxic activity against the Caco-2 and HT29-MTX intestine cell lines. Epirubicin was encapsulated into nanoparticles of CG-NIPA (1:1), resulting in a 64% association efficiency and 22% loading capacity. Thus, the CG:NIPA graft copolymer demonstrates good potential for used in controlled drug delivery systems.
Subject(s)
Acrylic Resins/chemistry , Drug Delivery Systems/methods , Epirubicin/administration & dosage , Nanoparticles/chemistry , Plant Gums/chemistry , Anacardium/chemistry , Caco-2 Cells , Dynamic Light Scattering , HT29 Cells , Humans , Nanoparticles/administration & dosage , Spectroscopy, Fourier Transform Infrared , ThermogravimetryABSTRACT
Nanoparticles are produced by means of polyelectrolyte complexation (PEC) of oppositely charged polycationic chitosan (CH) with polyanionic polysaccharide extracted from Sterculia striata exudates (rhamnogalacturonoglycan (RG)-type polysaccharide). The nanoparticles formed with low-molar-mass CH are larger than those formed with high-molar-mass CH. This behavior is in contrast with that previously observed for other systems and may be attributed to different mechanisms related to the association of CH with RG of higher persistence length chain than that of CH. Nanoparticles harnessed with a charge ratio (n(+)/n(-)) of <1 are smaller than particles with an excess of polycations. Particles with hydrodynamic sizes smaller than 100nm are achieved using a polyelectrolyte concentration of 10(-4)gmL(-1) and charge ratio (n(+)/n(-)) of <1. The CH/RG nanoparticles are associated with chloroquine (CQ) with an efficiency of 28% and release it for up to â¼60% within â¼10h, whereas in the latter, only â¼40% of the CQ was released after 24h. The main factor that influenced drug release rate is the nanoparticle charge ratio.
Subject(s)
Chitosan/chemistry , Chloroquine/chemistry , Delayed-Action Preparations , Karaya Gum/chemistry , Nanoparticles/chemistry , Sterculia/chemistry , Drug Compounding , Drug Liberation , Hydrogen-Ion Concentration , Karaya Gum/isolation & purification , Molecular Weight , Nanoparticles/ultrastructure , Particle Size , Static ElectricityABSTRACT
Carvacrol is a compound isolated from some essential oils. It has been reported to possess anthelmintic activity. Acetylation of this monoterpene has been proposed as a potential way to reduce the toxicity and enhance the pharmacological effects of carvacrol. This study aimed to evaluate the effect of carvacryl acetate (CA) using in vitro and in vivo assays with gastrointestinal nematodes of small ruminants. The egg hatching test (EHT), larval development test (LDT) and adult worm motility (AWM) assessment were conducted to evaluate the effect of the acetylated product and pure carvacrol on Haemonchus contortus eggs, larvae and adults. The structural changes induced in adult H. contortus were assessed using scanning electron microscopy (SEM). CA and carvacrol acute toxicity was evaluated in mice. Finally, the efficacy of 250 mg/kg CA and 2.5mg/kg monepantel (positive control) were evaluated in 30 sheep naturally infected with gastrointestinal nematodes by the fecal egg count reduction test (FECRT). In vitro tests were analyzed by analysis of variance (ANOVA) followed by comparison with Tukey's test. The efficacy was calculated by the Boot Street program using the arithmetic average. The number of eggs in feces (epg) of the groups were transformed to log (x+1) and subjected to ANOVA to compare differences among the groups by Tukey's test. The level of significance was P<0.05. CA and carvacrol inhibited larval hatching by 89.3 and 97.7% at doses of 8.0 and 1.0mg/ml, respectively. At the concentration of 2mg/ml, CA and carvacrol inhibited 100% of larval development. At a concentration of 200 µg/ml, CA and carvacrol inhibited the motility of adult worms by 100% and 58.3% at 24h post-exposure, respectively. CA caused cuticle and vulvar flap wrinkling and bubbles to emerge from the tegument. Carvacrol caused more discreet effects on the cuticle and vulvar flap. The LD10 and LD50 of CA were 566.7 mg/kg and 1544.5mg/kg, respectively. The LD10 and LD50 of carvacrol were 546.8 mg/kg and 919 mg/kg, respectively. CA and monepantel reduced the epg of sheep by 65.9 and 96.4%, respectively, at 16 days post-treatment. CA showed in vitro and in vivo anthelmintic activity and was less toxic than carvacrol.
Subject(s)
Behavior, Animal/drug effects , Monoterpenes/pharmacology , Monoterpenes/toxicity , Nematoda/drug effects , Animals , Anthelmintics/pharmacology , Anthelmintics/therapeutic use , Anthelmintics/toxicity , Cymenes , Feces/parasitology , Female , Larva/drug effects , Lethal Dose 50 , Male , Mice , Microscopy, Electron, Scanning , Monoterpenes/therapeutic use , Motor Activity/drug effects , Nematoda/ultrastructure , Nematode Infections/drug therapy , Nematode Infections/veterinary , Ovum/drug effects , Parasite Egg Count , Random Allocation , Sheep , Sheep Diseases/drug therapyABSTRACT
Acetylated cashew gum (ACG) was synthesized and self-assembled nanoparticles were obtained through the dialysis of an organic solution (DMSO) against a non-solvent (water). The ACG was characterized by infrared spectroscopy. The degree of substitution was 2.8 as determined by NMR spectroscopy. The physicochemical properties of the self-assembled nanoparticles in aqueous media were characterized by DLS, SEM and fluorescence spectroscopy. The mean diameter of the self-assembled nanoparticles obtained was 179 nm and the critical aggregation concentration (CAC) in water was 2.1×10(-3) g/L. Indomethacin (IND) was used as a hydrophobic model drug and was incorporated into the hydrophobized polysaccharide. Both loaded and unloaded nanoparticles were found to be spherical with diameters in the ranges of 70-170 nm and 108-314 nm (determined by SEM), respectively. Controlled drug release was observed for up to 72 h.
Subject(s)
Anacardium/chemistry , Drug Carriers/chemical synthesis , Nanoparticles/chemistry , Plant Gums/chemical synthesis , Acetylation , Drug Carriers/chemistry , Plant Gums/chemistryABSTRACT
Alginate/cashew gum nanoparticles were prepared via spray-drying, aiming at the development of a biopolymer blend for encapsulation of an essential oil. Nanoparticles were characterized regarding to their hydrodynamic volume, surface charge, Lippia sidoides essential oil content and release profile, in addition to being analyzed by infrared spectroscopy (FT-IR), thermal analysis (TGA/DSC) and X-ray diffractometry. Nanoparticles in solution were found to have averaged sizes in the range 223-399 nm, and zeta potential values ranging from -30 to -36 mV. Encapsulated oil levels varied from 1.9 to 4.4% with an encapsulation efficiency of up to 55%. The in vitro release profile showed that between 45 and 95% of oil was released within 30-50h. Kinetic studies revealed that release pattern follow a Korsmeyer-Peppas mechanism.
Subject(s)
Alginates/chemistry , Anacardium/chemistry , Nanoparticles/chemistry , Oils, Volatile/chemistry , Glucuronic Acid/chemistry , Hexuronic Acids/chemistry , Polymers/chemistry , Spectroscopy, Fourier Transform InfraredABSTRACT
Nanogels based on chitosan and cashew gum were prepared and loaded with Lippia sidoides oil. Several parameters such as cashew gum concentration and relative oil content in the matrix had their influence on nanogel properties investigated. Nanogels were characterized regarding their morphologies, particle size distributions, zeta potential, Fourier transform infrared spectroscopy and essential oil contents. The release profile was investigated by UV/vis spectroscopy and its efficacy was determined through bioassays. Results showed that samples designed using relative ratios matrix:oil 10:2, gum:chitosan 1:1 and 5% gum concentration showed high loading (11.8%) and encapsulation efficiency (70%). Nanogels were found to exhibit average sizes in the range 335-558 nm. In vitro release profiles showed that nanoparticles presented slower and sustained release. Bioassays showed that larval mortality was related mainly to oil loading, with samples presenting more effective larvicide efficacies than the pure L. sidoides oil.
Subject(s)
Anacardium/chemistry , Chitosan/chemistry , Insecticides , Nanocapsules/chemistry , Oils, Volatile , Aedes , Animals , Insecticides/chemistry , Insecticides/pharmacology , Larva , Oils, Volatile/pharmacologyABSTRACT
A polymeric floating system composed of Alginate (ALG) and Cashew gum (CG), loaded with an essential oil (Lippia sidoides-Ls) was prepared by ionotropic gelation, characterized regarding its physical-chemistry properties and evaluated on its potential as a controlled release system. The influence of process parameters on the buoyancy, loading, swelling and in vitro and in vivo release kinetics, was investigated. Results showed that beads produced with carbonate and Ls at high level contents exhibit good floatability (up to 5 days) and loading capacity (15.2-23.8%). In vitro release data showed a Fickian diffusion profile and in vivo experiments showed that ALG-CG floating system presented a superior and prolonged larvicide effect, in comparison with non-floating ones, presenting larvae mortality values of 85% and 33%, respectively, after 48 h. These results indicate that ALG-CG floating beads loaded with Ls presented enhanced oil entrapment efficiency, excellent floating ability, and suitable larvicide release pattern.