ABSTRACT
The industrial catalysts utilized for propane dehydrogenation (PDH) to propylene, an important alternative to petroleum-based cracking processes, either use expensive metals or metal oxides that are environmentally unbenign. We report that a typically less-active oxide, titanium oxide (TiO2), can be combined with earth-abundant metallic nickel (Ni) to form an unconventional Ni@TiOx catalyst for efficient PDH. The catalyst demonstrates a 94% propylene selectivity at 40% propane conversion and superior stability under industrially relevant conditions. Complete encapsulation of Ni nanoparticles was allowed at elevated temperatures (>550°C). A mechanistic study suggested that the defective TiOx overlayer consisting of tetracoordinated Ti sites with oxygen vacancies is catalytically active. Subsurface metallic Ni acts as an electronic promoter to accelerate carbon-hydrogen bond activation and hydrogen (H2) desorption on the TiOx overlayer.
ABSTRACT
The catalytic partial oxidation of methane (POM) presents a promising technology for synthesizing syngas. However, it faces severe over-oxidation over catalyst surface. Attempts to modify metal surfaces by incorporating a secondary metal towards C-H bond activation of CH4 with moderate O* adsorption have remained the subject of intense research yet challenging. Herein, we report that high catalytic performance for POM can be achieved by the regulation of O* occupation in the atomically dispersed (AD) MoNi alloy, with over 95% CH4 conversion and 97% syngas selectivity at 800 °C. The combination of ex-situ/in-situ characterizations, kinetic analysis and DFT (density functional theory) calculations reveal that Mo-Ni dual sites in AD MoNi alloy afford the declined O2 poisoning on Ni sites with rarely weaken CH4 activation for partial oxidation pathway following the combustion reforming reaction (CRR) mechanism. These results underscore the effectiveness of CH4 turnovers by the design of atomically dispersed alloys with tunable O* adsorption.
ABSTRACT
The structure of catalysts determines the performance of catalytic processes. Intrinsically, the electronic and geometric structures influence the interaction between active species and the surface of the catalyst, which subsequently regulates the adsorption, reaction, and desorption behaviors. In recent decades, the development of catalysts with complex structures, including bulk, interfacial, encapsulated, and atomically dispersed structures, can potentially affect the electronic and geometric structures of catalysts and lead to further control of the transport and reaction of molecules. This review describes comprehensive understandings on the influence of electronic and geometric properties and complex catalyst structures on the performance of relevant heterogeneous catalytic processes, especially for the transport and reaction over structured catalysts for the conversions of light alkanes and small molecules. The recent research progress of the electronic and geometric properties over the active sites, specifically for theoretical descriptors developed in the recent decades, is discussed at the atomic level. The designs and properties of catalysts with specific structures are summarized. The transport phenomena and reactions over structured catalysts for the conversions of light alkanes and small molecules are analyzed. At the end of this review, we present our perspectives on the challenges for the further development of structured catalysts and heterogeneous catalytic processes.
ABSTRACT
The strong promotion effects of alkali/alkaline earth metals are frequently reported for heterogeneous catalytic processes such as propane dehydrogenation (PDH), but their functioning principles remain elusive. This paper describes the effect of the addition of calcium (Ca) on reducing the deactivation rate of platinum-tin (Pt-Sn) catalyzed PDH from 0.04 h-1 to 0.0098 h-1 at 873 K under a WHSV of 16.5 h-1 of propane. The Pt-Sn-Ca catalyst shows a high propylene selectivity of >96% with a propylene production rate of 41 molC3H6 (gPt h)-1 and â¼1% activity loss after regeneration. The combination of characterization and DFT simulations reveals that Ca acts as a structural promoter favoring the transition of Snn+ in the parent catalyst to Sn0 during reduction, and the latter is an electron donor that increases the electron density of Pt. This greatly suppresses coke formation from deep dehydrogenation. Moreover, it was found that Ca promotes the formation of a highly reactive and sintering-resistant sub-nano Pt-Sn alloy with a diameter of approximately 0.8 nm. These lead to high activity and selectivity for the Pt-Sn-Ca catalyst for PDH.
ABSTRACT
In heterogeneous catalysis, the catalytic dehydrogenation reactions of hydrocarbons often exhibit a negative pressure dependence on hydrogen due to the competitive chemisorption of hydrocarbons and hydrogen. However, some catalysts show a positive pressure dependence for propane dehydrogenation, an important reaction for propylene production. Here we show that the positive activity dependence on H2 partial pressure of gallium oxide-based catalysts arises from metastable hydride mediation. Through in situ spectroscopic, kinetic and computational analyses, we demonstrate that under reaction conditions with H2 co-feeding, the dissociative adsorption of H2 on a partially reduced gallium oxide surface produces H atoms chemically bonded to coordinatively unsaturated Ga atoms. These metastable gallium hydride species promote C-H bond activation while inhibiting deep dehydrogenation. We found that the surface coverage of gallium hydride determines the catalytic performance. Accordingly, benefiting from proper H2 co-feeding, the alumina-supported, trace additive-modified gallium oxide catalyst GaOx-Ir-K/Al2O3 exhibited high activity and selectivity at high propane concentrations.
ABSTRACT
Direct propane dehydrogenation (PDH) to propylene is a desirable commercial reaction but is highly endothermic and severely limited by thermodynamic equilibrium. Routes that oxidatively remove hydrogen as water have safety and cost challenges. We coupled chemical looping-selective hydrogen (H2) combustion and PDH with multifunctional ferric vanadate-vanadium oxide (FeVO4-VOx) redox catalysts. Well-dispersed VOx supported on aluminum oxide (Al2O3) provides dehydrogenation sites, and adjacent nanoscale FeVO4 acts as an oxygen carrier for subsequent H2 combustion. We achieved an integral performance of 81.3% propylene selectivity at 42.7% propane conversion at 550°C for 200 chemical looping cycles for the reoxidization of FeVO4. Based on catalytic experiments, spectroscopic characterization, and theory calculations, we propose a hydrogen spillover-mediated coupling mechanism. The hydrogen species generated at the VOx sites migrated to adjacent FeVO4 for combustion, which shifted PDH toward propylene. This mechanism is favored by the proximity between the dehydrogenation and combustion sites.
ABSTRACT
Acidic electrochemical CO2 reduction reaction (CO2RR) can minimize carbonate formation and eliminate CO2 crossover, thereby improving long-term stability and enhancing single-pass carbon efficiency (SPCE). However, the kinetically favored hydrogen evolution reaction (HER) is generally predominant under acidic conditions. This paper describes the confinement of a local alkaline environment for efficient CO2RR in a strongly acidic electrolyte through the manipulation of mass transfer processes in well-designed hollow-structured Ag@C electrocatalysts. A high faradaic efficiency of over 95% at a current density of 300 mA cm-2 and an SPCE of 46.2% at a CO2 flow rate of 2 standard cubic centimeters per minute are achieved in the acidic electrolyte, with enhanced stability compared to that under alkaline conditions. Computational modeling results reveal that the unique structure of Ag@C could regulate the diffusion process of OH- and H+, confining a high-pH local reaction environment for the promoted activity. This work presents a promising route to engineer the microenvironment through the regulation of mass transport that permits the CO2RR in acidic electrolytes with high performance.
ABSTRACT
The mechanism of how interfacial wettability impacts the CO2 electroreduction pathways to ethylene and ethanol remains unclear. This paper describes the design and realization of controllable equilibrium of kinetic-controlled *CO and *H via modifying alkanethiols with different alkyl chain lengths to reveal its contribution to ethylene and ethanol pathways. Characterization and simulation reveal that the mass transport of CO2 and H2O is related with interfacial wettability, which may result in the variation of kinetic-controlled *CO and *H ratio, which affects ethylene and ethanol pathways. Through modulating the hydrophilic interface to superhydrophobic interface, the reaction limitation shifts from insufficient supply of kinetic-controlled *CO to that of *H. The ethanol to ethylene ratio can be continuously tailored in a wide range from 0.9 to 1.92, with remarkable Faradaic efficiencies toward ethanol and multi-carbon (C2+) products up to 53.7% and 86.1%, respectively. A C2+ Faradaic efficiency of 80.3% can be achieved with a high C2+ partial current density of 321 mA cm-2, which is among the highest selectivity at such current densities.
Subject(s)
Carbon Dioxide , Ethylenes , Wettability , EthanolABSTRACT
Propane dehydrogenation (PDH) is an industrial technology for direct propylene production which has received extensive attention in recent years. Nevertheless, existing non-oxidative dehydrogenation technologies still suffer from the thermodynamic equilibrium limitations and severe coking. Here, we develop the intensified propane dehydrogenation to propylene by the chemical looping engineering on nanoscale core-shell redox catalysts. The core-shell redox catalyst combines dehydrogenation catalyst and solid oxygen carrier at one particle, preferably compose of two to three atomic layer-type vanadia coating ceria nanodomains. The highest 93.5% propylene selectivity is obtained, sustaining 43.6% propylene yield under 300 long-term dehydrogenation-oxidation cycles, which outperforms an analog of industrially relevant K-CrOx/Al2O3 catalysts and exhibits 45% energy savings in the scale-up of chemical looping scheme. Combining in situ spectroscopies, kinetics, and theoretical calculation, an intrinsically dynamic lattice oxygen "donator-acceptor" process is proposed that O2- generated from the ceria oxygen carrier is boosted to diffuse and transfer to vanadia dehydrogenation sites via a concerted hopping pathway at the interface, stabilizing surface vanadia with moderate oxygen coverage at pseudo steady state for selective dehydrogenation without significant overoxidation or cracking.
ABSTRACT
Redox catalysts play a vital role in chemical looping oxidative dehydrogenation processes, which have recently been considered to be a promising prospect for propylene production. This work describes the coupling of surface acid catalysis and selective oxidation from lattice oxygen over MoO3-Fe2O3 redox catalysts for promoted propylene production. Atomically dispersed Mo species over γ-Fe2O3 introduce effective acid sites for the promotion of propane conversion. In addition, Mo could also regulate the lattice oxygen activity, which makes the oxygen species from the reduction of γ-Fe2O3 to Fe3O4 contribute to selectively oxidative dehydrogenation instead of over-oxidation in pristine γ-Fe2O3. The enhanced surface acidity, coupled with proper lattice oxygen activity, leads to a higher surface reaction rate and moderate oxygen diffusion rate. Consequently, this coupling strategy achieves a robust performance with 49% of propane conversion and 90% of propylene selectivity for at least 300 redox cycles and ultimately demonstrates a potential design strategy for more advanced redox catalysts.
ABSTRACT
Geometrically isolated metal atoms in alloy catalysts can target efficient and selective catalysis. However, the geometric and electronic disturbance between the active atom and its neighbouring atoms, that is, diverse microenvironments, makes the active site ambiguous. Herein, we demonstrate a methodology to describe the microenvironment and determine the effectiveness of active sites in single-site alloys. A simple descriptor, degree-of-isolation, is proposed, considering both electronic regulation and geometric modulation within a PtM ensemble (M = transition metal). The catalytic performance of PtM single-site alloy is examined thoroughly using this descriptor for an industrially important reaction, propane dehydrogenation. The volcano-shaped isolation-selectivity plot reveals a Sabatier-type principle for designing selective single-site alloys. Specifically, for a single-site alloy with a high degree-of-isolation, alternation of the active centre has a great impact on tuning selectivity, validated by the outstanding consistency between experimental propylene selectivity and the computational descriptor.
Subject(s)
Alloys , Electronics , Catalysis , PropaneABSTRACT
Atomic layer deposition (ALD) is an established method to prepare protective layers for Si-based photoelectrodes for photoelectrochemical (PEC) water splitting. Although ALD has been widely used in microelectronics and photovoltaics, it remains a great challenge to design simple and effective ALD systems to deposit large and uniform protective films for Si-based photoelectrodes with industrial sizes. This paper describes the design and realization of a simple ALD chamber configuration for photoelectrodes with large sizes, in which the influence of a gas redistributor over the gas flow and heat transfer during film growth was revealed by computational fluid dynamics simulations and experimental investigations. A simple circular baffle-type redistributor was proposed to establish a uniform gas flow field throughout the ALD reactor, resulting in a uniform temperature profile. With this simple baffle redistributor, the large-area Al2O3 monitor film (46 nm thickness) reached a good nonuniformity (Nu %) of 0.88% over a large area of 256 cm2. This design enables the fabrication of large-scale photocathodes from standard industrial-grade 166 mm Si(100) wafers (276 cm2) by depositing 50 nm TiO2 protective films with Nu % less than 5%. The obtained photocathode achieves a saturation current of 6.45 A with a hydrogen production rate of 43.2 mL/min under outdoor illumination. This work elucidates how flow pattern and heat transfer may influence the deposition of protective layers over large photoelectrodes, providing guidance for future industrial applications of PEC water splitting.
ABSTRACT
PtCu single-atom alloys (SAAs) open an extensive prospect for heterogeneous catalysis. However, as the host of SAAs, Cu suffers from severe sintering at elevated temperature, resulting in poor stability of catalysts. This paper describes the suppression of the agglomeration of Cu nanoparticles under high temperature conditions using copper phyllosilicate (CuSiO3) as the support of PtCu SAAs. Based on quasi in situ XPS, in situ CO-DRIFTS, in situ Raman spectroscopy and in situ XRD, we demonstrated that the interfacial Cu+-O-Si formed upon reduction at 680 °C serves as the adhesive between Cu nanoparticles and the silicon dioxide matrix, strengthening the metal-support interaction. Consequently, the resistance to sintering of PtCu SAAs was improved, leading to high catalytic stability during propane dehydrogenation without sacrificing conversion and selectivity. The optimized PtCu SAA catalyst achieved more than 42% propane conversion and 93% propylene selectivity at 580 °C for at least 30 hours. It paves a way for the design and development of highly active supported single-atom alloy catalysts with excellent thermal stability.
ABSTRACT
Protective layers are essential for Si-based photocathodes to achieve long-term stability. The conventionally used inorganic protective layers, such as TiO2, need to be free of pinholes to isolate Si from corrosive solution, which demands extremely high-quality deposition techniques. On the other hand, organic hydrophobic protective layers suffer from the trade-off between current density and stability. This paper describes the design and fabrication of a discontinuous hybrid organic protective layer with controllable surface wettability. The underlying hydrophobic layer induces the formation of thin gas layers at the discontinuous pores to isolate the electrolyte from Si substrate, while allowing Pt co-catalyst to contact the electrolyte for water splitting. Meanwhile, the surface of this organic layer is modified with hydrophilic hydroxyl groups to facilitate bubble detachment. The optimized photocathode achieves a stable photocurrent of 35 mA/cm2 for over 110 h with no trend of decay.
ABSTRACT
The synergy between metals and metal oxides can effectively improve the heterogeneous catalytic process. This paper describes the intrinsic effect of Pt modification over GaOx (Pt-GaOx ) on propane dehydrogenation. The presence of Pt promotes H2 dissociation and surface coverage of hydrogen species, which is beneficial for the activation of C-H in propane. With excessive Pt, Gaδ+ can be further reduced to form Pt-Ga alloy with less surface hydrogen species. Consequently, the relative propylene formation rate between Pt-GaOx and the summed contribution of individual Pt and GaOx increases linearly with the content of hydrogen species. Optimally, the relative propylene formation rate of Pt-GaOx with 0.03â wt % Pt exceeds 25 % of the summed contribution of individual components.
ABSTRACT
The suppression of methane and coke formation over Ni-based catalysts for low temperature ethanol steam reforming remains challenging. This paper describes the structural evolution of Fe-modified Ni/MgAl2O4 catalysts and the influence of iron species on methane and coke suppression for low temperature ethanol steam reforming. Ni-Fe alloy catalysts are gradually oxidized by water to generate Ni-rich alloy and γ-Fe2O3 species at steam-to-carbon ratio of 4. The electron transfer from iron to nickel within Ni-Fe alloy weakens the CO adsorption and effectively alleviates the CO/CO2 methanation. The oxidation capacity of γ-Fe2O3 species promotes the transformation of ethoxy to acetate groups to avoid methane formation and the elimination of carbon deposits for anticoking. Ni10Fe10/MgAl2O4 shows a superior performance with a highest H2 yield of 4.6 mol/mol ethanol at 400 °C for 15 h. This research could potentially provide instructions for the design of Ni-based catalysts for low-temperature ethanol steam reforming.
ABSTRACT
Propylene is an important building block for enormous petrochemicals including polypropylene, propylene oxide, acrylonitrile and so forth. Propane dehydrogenation (PDH) is an industrial technology for direct propylene production which has received extensive attention in recent years. With the development of dehydrogenation technologies, the efficient adsorption/activation of propane and subsequential desorption of propylene on the surfaces of heterogeneous catalysts remain scientifically challenging. This review describes recent advances in the fundamental understandings of the PDH process in terms of emerging technologies, catalyst development and new chemistry in regulating the catalyst structures and inhibiting the catalyst deactivation. The active sites, reaction pathways and deactivation mechanisms of PDH over metals and metal oxides as well as their dependent factors are also analysed and discussed, which is expected to enable efficient catalyst design for minimizing the reaction barriers and controlling the selectivity towards propylene. The challenges and perspectives of PDH over heterogeneous catalysts are also proposed for further development.
ABSTRACT
Metal oxides are widely employed in heterogeneous catalysis, but it remains challenging to determine their exact structure and understand the reaction mechanisms at the molecular level due to their structural complexity, in particular for binary oxides. This paper describes the observation of the strong electronic interaction between In2O3 and monoclinic ZrO2 (m-ZrO2) by quasi-in-situ XPS experiments combined with theoretical studies, which leads to support-dependent methanol selectivity. In2O3/m-ZrO2 exhibits methanol selectivity up to 84.6% with a CO2 conversion of 12.1%. Moreover, at a wide range of temperatures, the methanol yield of In2O3/m-ZrO2 is much higher than that of In2O3/t-ZrO2 (t-: tetragonal), which is due to the high dispersion of the In-O-In structure over m-ZrO2 as determined by in situ Raman spectra. The electron transfer from m-ZrO2 to In2O3 is confirmed by XPS and DFT calculations and improves the electron density of In2O3, which promotes H2 dissociation and hydrogenation of formate intermediates to methanol. The concept of the electronic interaction between an oxide and a support provides guidelines to develop hydrogenation catalysts.
ABSTRACT
Chemical looping provides an energy- and cost-effective route for alkane utilization. However, there is considerable CO2 co-production caused by kinetically mismatched O2- bulk diffusion and surface reaction in current chemical looping oxidative dehydrogenation systems, rendering a decreased olefin productivity. Sub-monolayer or monolayer vanadia nanostructures are successfully constructed to suppress CO2 production in oxidative dehydrogenation of propane by evading the interference of O2- bulk diffusion (monolayer versus multi-layers). The highly dispersed vanadia nanostructures on titanium dioxide support showed over 90 % propylene selectivity at 500 °C, exhibiting turnover frequency of 1.9×10-2 â s-1 , which is over 20 times greater than that of conventional crystalline V2 O5 . Combining inâ situ spectroscopic characterizations and DFT calculations, we reveal the loading-reaction barrier relationship through the vanadia/titanium interfacial interaction.