Ultra-short photoacoustic pulse generation through hot electron pressure in two-dimensional electron gas.

Launching ultrashort femtosecond photoacoustic pulses with multi-terahertz bandwidth will find broad applications from fundamental acoustics in 2D materials and THz-acoustic and phonon spectroscopy to nondestructive detection in opaque materials with a sub-nanometer resolution. Here we report the generation of ultra-short 344 fs photoacoustic pulses with a 2.1 THz bandwidth from interfacial two-dimensional electron gas using optical femtosecond excitation. A comparison with simulation supports the dominant contribution of hot electron pressure and the ultrafast electron relaxation to produce pulsewidth shorter than the acoustic transit time across the electron wavefunction. Our simulation further indicates the possibility to generate <200 fs photoacoustic pulse.

Multiwavelength generation from multi-nonlinear optical process in a 2D PPLT.

We have demonstrated multi-wavelength generation in a nonlinear photonic crystals of lithium tantalate. The optical parametric generation leads to second harmonic generation, sum-frequency generation and other frequency conversion in a cascade process. These conversions are assisted by all the optical nonlinear process involving χ(2) and achieved by satisfying the quasi-phase matching conditions.

Fiber-based 1150-nm femtosecond laser source for the minimally invasive harmonic generation microscopy.

Harmonic generation microscopy (HGM) has become one unique tool of optical virtual biopsy for the diagnosis of cancer and the in vivo cytometry of leukocytes. Without labeling, HGM can reveal the submicron features of tissues and cells in vivo. For deep imaging depth and minimal invasiveness, people commonly adopt 1100- to 1300-nm femtosecond laser sources. However, those lasers are typically based on bulky oscillators whose performances are sensitive to environmental conditions. We demonstrate a fiber-based 1150-nm femtosecond laser source, with 6.5-nJ pulse energy, 86-fs pulse width, and 11.25-MHz pulse repetition rate. It was obtained by a bismuth borate or magnesium-doped periodically poled lithium niobate (MgO:PPLN) mediated frequency doubling of the 2300-nm solitons, generated from an excitation of 1550-nm femtosecond pulses on a large mode area photonic crystal fiber. Combined with a home-built laser scanned microscope and a tailor-made frame grabber, we achieve a pulse-per-pixel HGM imaging in vivo at a 30-Hz frame rate. This integrated solution has the potential to be developed as a stable HGM system for routine clinical use.

Multi-resonant optical parametric oscillator based on 2D-PPLT nonlinear photonic crystal.

The aim of this work is to achieve an optical parametric oscillator based on two-dimensional periodically poled lithium tantalate (2D-PPLT) crystals that are designed to allow multiple reciprocal lattice-vector contribution to the quasi-phase matching scheme. We are particularly interested in the effect of the multi-wavelength parametric generation performed by the 2D nonlinear photonic crystal to achieve a multi-resonant optical parametric oscillator. The performances are studied in terms of generation efficiency and multi-wavelength generation.

Speckle noise reduction on a laser projection display via a broadband green light source.

A broadband green light source was demonstrated using a tandem-poled lithium niobate (TPLN) crystal. The measured wavelength and temperature bandwidth were 6.5 nm and 100 °C, respectively, spectral bandwidth was 36 times broader than the periodically poled case. Although the conversion efficiency was smaller than in the periodic case, the TPLN device had a good figure of merit owing to the extremely large bandwidth for wavelength and temperature. The developed broadband green light source exhibited speckle noise approximately one-seventh of that in the conventional approach for a laser projection display.

Self-organized nanoparticle photolithography for two-dimensional patterning of organic light emitting diodes.

We report a new simple and inexpensive sub-micrometer two dimensional patterning technique. This technique combines a use of a photomask featured with self-organized particles in the micro- to nano-meter size range and a photoresist-covered substrate. The photomask was prepared by depositing monodispersed silicon dioxide (SiO(2))- or polystyrene- spheres on a quartz substrate to form a close-packed pattern. The patterning technique can be realized in two configurations: a hard-contact mode or a soft-contact mode. In the first configuration, each sphere acts as a micro ball-lens that focuses light and exposes the photoresist underneath the sphere. The developed pattern therefore reproduces exactly the same spatial arrangement as the close-packed spheres but with a feature size of developed hole smaller than the diameter of the sphere. In the soft-contact mode, an air gap of few micrometers thick is introduced between the 2D array of self-organized spheres and the photoresist-covered substrate. In this case, a phase mask behavior is obtained which results in an exposure area with a lattice period being half of the sphere diameter. A 2D lattice structure with period and feature size of a developed hole as small as 750 nm and 420 nm, respectively, was realized in this configuration. We further applied this technique to host the deposition of organic films into the 2D nanostructure and demonstrated the realization of green and red nano-structured OLEDs.

Experimental study of multiwavelength parametric generation in a two-dimensional periodically poled lithium tantalate crystal.

In this Letter, we experimentally investigate multiwavelength parametric generation in two-dimensional second-order nonlinear photonic crystals. For this purpose, a 2D periodically poled lithium tantalate crystal with rectangular lattice was fabricated and characterized. We demonstrate multiple and simultaneous wavelength generation due to the contribution of different lattice vectors. Numerical simulations emphasize the agreement of our phase matching scheme with the experimental results and made it possible to assign the observed wavelengths to the reciprocal lattice vectors involved in the parametric generation process. Moreover, our results indicate that some signals are the result of the joint contribution of more than one lattice vector.

Compact optical function generator.

We demonstrate the use of a nonlinear photonic crystal to generate a harmonic comb and an ultrabroad-band acousto-optic modulator for the field amplitudes and phases of the comb to succeed in synthesizing femtosecond and subfemtosecond optical field waveforms. Nonsinusoidal fields of various shapes are synthesized and verified using shaper-assisted linear cross-correlation. The compact all-solid-state system could lead to the realization of a portable arbitrary optical waveform synthesizer that is analogous in many aspects to an RF function generator.

Gallium nitride nanowire based nanogenerators and light-emitting diodes.

Single-crystal n-type GaN nanowires have been grown epitaxially on a Mg-doped p-type GaN substrate. Piezoelectric nanognerators based on GaN nanowires are investigated by conductive AFM, and the results showed an output power density of nearly 12.5 mW/m(2). Luminous LED modules based on n-GaN nanowires/p-GaN substrate have been fabricated. CCD images of the lighted LED and the corresponding electroluminescence spectra are recorded at a forward bias. Moreover, the GaN nanowire LED can be lighted up by the power provided by a ZnO nanowire based nanogenerator, demonstrating a self-powered LED using wurtzite-structured nanomaterials.

Synthesis and measurement of ultrafast waveforms from five discrete optical harmonics.

Achieving the control of light fields in a manner similar in sophistication to the control of electromagnetic fields in the microwave and radiofrequency regimes has been a major challenge in optical physics research. We manipulated the phase and amplitude of five discrete harmonics spanning the blue to mid-infrared frequencies to produce instantaneous optical fields in the shape of square, sawtooth, and subcycle sine and cosine pulses at a repetition rate of 125 terahertz. Furthermore, we developed an all-optical shaper-assisted linear cross-correlation technique to retrieve these fields and thereby verified their shapes and confirmed the critical role of carrier-envelope phase in Fourier synthesis of optical waveforms.

Generation of multi-octave-spanning laser harmonics by cascaded quasi-phase matching in a monolithic ferroelectric crystal.

We report the generation of the second to the sixth harmonics of a fundamental frequency covering two and a half octaves in a multiply-periodically poled lithium tantalate crystal by cascaded quasi-phase-matched frequency mixing. A frequency comb that is composed of these harmonics will permit the synthesis of a train of periodic subcycle subfemtosecond pulses in a compact setting.

Enhanced light collection of GaN light emitting devices by redirecting the lateral emission using nanorod reflectors.

We demonstrate a method of utilizing self-assembled nanorod array reflectors to collect the laterally propagating guided modes from a light emitting diode (LED). We measure an enhancement factor of 12.2% and 18.4%, respectively, from the sidewall emission of GaN-based LEDs encompassed with 10 and 20 microm thick nanorod array reflectors. Such enhancement is found to be omnidirectional due to a broken symmetry from a randomized distribution of the nanorod array placed along the periphery of the LED's mesa. These observations indicate that the use of nanorod reflectors can efficiently redirect the propagation of the laterally guided modes to the surface normal direction.

GaN nanorod light emitting diode arrays with a nearly constant electroluminescent peak wavelength.

A practical process to fabricate InGaN/GaN multiple quantum well light emitting diodes (LEDs) with a self-organized nanorod structure is demonstrated. The nanorod array is realized by using nature lithography of surface patterned silica spheres followed by dry etching. A layer of spin-on-glass (SOG), which intervening the rod spacing, serves the purpose of electric isolation to each of the parallel nanorod LED units. The electroluminescence peak wavelengths of the nanorod LEDs nearly remain as constant for an injection current level between 25mA and 100mA, which indicates that the quantum confined stark effect is suppressed in the nanorod devices. Furthermore, from the Raman light scattering analysis we identify a strain relaxation mechanism for lattice mismatch layers in the nanostructure.