ABSTRACT
Long-acting drug delivery systems are promising platforms to improve patient adherence to medication by delivering drugs over sustained periods and removing the need for patients to comply with oral regimens. This research paper provides a proof-of-concept for the development of a new optimized in situ forming injectable depot based on a tetrabenzylamine-tetraglycine-d-lysine-O-phospho-d-tyrosine peptoid-D-peptide formulation ((NPhe)4GGGGk(AZT)y(p)-OH). The chemical versatility of the peptoid-peptide motif allows low-molecular-weight drugs to be precisely and covalently conjugated. After subcutaneous injection, a hydrogel depot forms from the solubilized peptoid-peptide-drug formulation in response to phosphatase enzymes present within the skin space. This system is able to deliver clinically relevant concentrations of a model drug, the antiretroviral zidovudine (AZT), for 35 days in Sprague-Dawley rats. Oscillatory rheology demonstrated that hydrogel formation began within â¼30 s, an important characteristic of in situ systems for reducing initial drug bursts. Gel formation continued for up to â¼90 min. Small-angle neutron scattering data reveal narrow-radius fibers (â¼0.78-1.8 nm) that closely fit formation via a flexible cylinder elliptical model. The inclusion of non-native peptoid monomers and D-variant amino acids confers protease resistance, enabling enhanced biostability to be demonstrated in vitro. Drug release proceeds via hydrolysis of an ester linkage under physiological conditions, releasing the drug in an unmodified form and further reducing the initial drug burst. Subcutaneous administration of (NPhe)4GGGGk(AZT)y(p)-OH to Sprague-Dawley rats resulted in zidovudine blood plasma concentrations within the 90% maximal inhibitory concentration (IC90) range (30-130 ng mL-1) for 35 days.
Subject(s)
Hydrogels , Peptoids , Rats, Sprague-Dawley , Hydrogels/chemistry , Animals , Peptoids/chemistry , Rats , Drug Delivery Systems , Zidovudine/chemistry , Zidovudine/administration & dosage , Zidovudine/pharmacology , Peptides/chemistry , Injections, SubcutaneousABSTRACT
Eradicating HIV/AIDS by 2030 is a central goal of the World Health Organization. Patient adherence to complicated dosage regimens remains a key barrier. There is a need for convenient long-acting formulations that deliver drugs over sustained periods. This paper presents an alternative platform, an injectable in situ forming hydrogel implant to deliver a model antiretroviral drug (zidovudine [AZT]) over 28 days. The formulation is a self-assembling ultrashort d or l-α peptide hydrogelator, namely phosphorylated (naphthalene-2-ly)-acetyl-diphenylalanine-lysine-tyrosine-OH (NapFFKY[p]-OH), covalently conjugated to zidovudine via an ester linkage. Rheological analysis demonstrates phosphatase enzyme instructed self-assembly, with hydrogels forming within minutes. Small angle neutron scattering data suggest hydrogels form narrow radius (≈2 nm), large length fibers closely fitting the flexible cylinder elliptical model. d-Peptides are particularly promising for long-acting delivery, displaying protease resistance for 28 days. Drug release, via hydrolysis of the ester linkage, progress under physiological conditions (37 °C, pH 7.4, H2 O). Subcutaneous administration of Napffk(AZT)Y[p]G-OH in Sprague Dawley rats demonstrate zidovudine blood plasma concentrations within the half maximal inhibitory concentration (IC50 ) range (30-130 ng mL-1 ) for 35 days. This work is a proof-of-concept for the development of a long-acting combined injectable in situ forming peptide hydrogel implant. These products are imperative given their potential impact on society.
Subject(s)
Anti-HIV Agents , HIV Infections , Rats , Animals , Hydrogels/pharmacology , Anti-HIV Agents/pharmacology , Anti-HIV Agents/therapeutic use , Zidovudine/pharmacology , Zidovudine/therapeutic use , Rats, Sprague-Dawley , Peptides/pharmacology , Peptides/therapeutic use , HIV Infections/drug therapy , EstersABSTRACT
Purpose: Age-related macular degeneration is a vision-threatening disorder affecting the posterior segment of the eye. Drug delivery to the posterior segment is challenging owing to the complex anatomical and physiological structure, necessitating monthly injections of antivascular endothelial growth factors. Thermoresponsive hydrogels provide sustained drug delivery and ease of injection, due to their sol-gel transition. Poly (N-isopropyl acrylamide) (PNIPAAm) is a widely researched thermoresponsive hydrogel; however, insufficient wet strength and a wide mesh network make it inept for the entrapment of small molecules. Methods: A novel approach of grafting PNIPAAm with chitosan is exploited. A chitosan concentration altered in 10%, 30%, and 50% compared to PNIPAAm is investigated for entrapment of a small-molecular weight, hydrophilic drug, sunitinib (SUN), a multiple tyrosine kinase receptor inhibitor. Furthermore, these hydrogels were characterized using 1H-NMR, FTIR, differential scanning calorimetry (DSC), and thermogravimetric analysis for chemical characterization and viscosity, swellability, syringeability, degradation, and In-vitro permeation using Franz-diffusion cell. Results: In-vitro drug release kinetics suggested that the release of SUN could be controlled with the percentage of chitosan grafting; however, gel strength (3%-5% w/v) of 30% Cs-g-PNIPAAm did not significantly affect percentage drug release. Sustained release of SUN was observed for 1 month. In-vitro permeation studies on porcine sclera suggested that a thermoresponsive gel of chitosan grafted PNIPAAm (Cs-g-PNIPAAm) was able to sustain the drug release by 40%, compared to SUN solution. Conclusions: The study indicates that the synthesized Cs-g-NIPAAm hydrogel has the potential to serve as a tailorable injectable platform for intrascleral drug delivery applications.
Subject(s)
Chitosan , Hydrogels , Animals , Chitosan/chemistry , Drug Delivery Systems , Hydrogels/chemistry , Sunitinib , Swine , TemperatureABSTRACT
The use of hydrogels has garnered significant interest as biomaterial and drug delivery platforms for anti-infective applications. For decades antimicrobial peptides have been heralded as a much needed new class of antimicrobial drugs. Self-assembling peptide hydrogels with inherent antimicrobial ability have recently come to the fore. However, their fundamental antimicrobial properties, selectivity and mechanism of action are relatively undefined. This review attempts to establish a link between antimicrobial efficacy; the self-assembly process; peptide-membrane interactions and mechanical properties by studying several reported peptide systems: ß-hairpin/ß-loop peptides; multidomain peptides; amphiphilic surfactant-like peptides and ultrashort/low molecular weight peptides. We also explore their role in the formation of amyloid plaques and the potential for an infection etiology in diseases such as Alzheimer's. We look briefly at innovative methods of gel characterization. These may provide useful tools for future studies within this increasingly important field.
Subject(s)
Anti-Infective Agents , Hydrogels , Anti-Infective Agents/pharmacology , Biocompatible Materials , Peptides , Surface-Active AgentsABSTRACT
Glioblastoma multiforme (GBM) is an incurable aggressive brain cancer in which current treatment strategies have demonstrated limited survival benefit. In recent years, nitrogen-containing bisphosphonates (N-BPs) have demonstrated direct anticancer effects in a number of tumour types including GBM. In this study, a nano-formulation with the RALA peptide was used to complex the N-BP, alendronate (ALN) into nanoparticles (NPs) < 200 nm for optimal endocytic uptake. Fluorescently labelled AlexaFluor®647 Risedronate was used as a fluorescent analogue to visualise the intracellular delivery of N-BPs in both LN229 and T98G GBM cells. RALA NPs were effectively taken up by GBM where a dose-dependent response was evidenced with potentiation factors of 14.96 and 13.4 relative to ALN alone after 72 h in LN229 and T98G cells, respectively. Furthermore, RALA/ALN NPs at the IC50, significantly decreased colony formation, induced apoptosis and slowed spheroid growth in vitro. In addition, H-Ras membrane localisation was significantly reduced in the RALA/ALN groups compared to ALN or controls, indicative of prenylation inhibition. The RALA/ALN NPs were lyophilised to enhance stability without compromising the physiochemical properties necessary for functionality, highlighting the suitability of the NPs for scale-up and in vivo application. Collectively, these data show the significant potential of RALA/ALN NPs as novel therapeutics in the treatment of GBM.
Subject(s)
Antineoplastic Agents/pharmacology , Diphosphonates/pharmacology , Glioblastoma/drug therapy , Nanomedicine/methods , Nitrogen/pharmacology , Alendronate/chemistry , Alendronate/pharmacology , Alendronate/therapeutic use , Animals , Apoptosis/drug effects , Brain Neoplasms , Cell Line, Tumor , Cell Survival/drug effects , Diphosphonates/chemistry , Diphosphonates/therapeutic use , Humans , Nanoparticles/chemistry , Particle Size , PeptidesABSTRACT
Calcium phosphate-base materials (e.g., alpha tri-calcium phosphate (α-TCP)) have been shown to promote osteogenic differentiation of stem/progenitor cells, enhance osteoblast osteogenic activity and mediate in vivo bone tissue formation. However, variable particle size and hydrophilicity of the calcium phosphate result in an extremely low bioavailability. Therefore, an effective delivery system is required that can encapsulate the calcium phosphate, improve cellular entry and, consequently, elicit a potent osteogenic response in osteoblasts. In this study, collagenous matrix deposition and extracellular matrix mineralization of osteoblast lineage cells were assessed to investigate osteogenesis following intracellular delivery of α-TCP nanoparticles. The nanoparticles were formed via condensation with a novel, cationic 30 mer amphipathic peptide (RALA). Nanoparticles prepared at a mass ratio of 5:1 demonstrated an average particle size of 43 nm with a zeta potential of +26 mV. The average particle size and zeta potential remained stable for up to 28 days at room temperature and across a range of temperatures (4-37 °C). Cell viability decreased 24 h post-transfection following RALA/α-TCP nanoparticle treatment; however, recovery ensued by Day 7. Immunocytochemistry staining for Type I collagen up to Day 21 post-transfection with RALA/α-TCP nanoparticles (NPs) in MG-63 cells exhibited a significant enhancement in collagen expression and deposition compared to an untreated control. Furthermore, in porcine mesenchymal stem cells (pMSCs), there was enhanced mineralization compared to α-TCP alone. Taken together these data demonstrate that internalization of RALA/α-TCP NPs elicits a potent osteogenic response in both MG-63 and pMSCs.
ABSTRACT
Peptide nanotubes are promising materials for a variety of biomedical applications with ultrashort (≤7 amino acids) forms providing particular promise for clinical translation. The manufacture of peptide nanotubes has, however, been associated with toxic organic solvents restricting clinical use. The purpose of this work is to formulate dipeptide nanotubes using mild techniques easily translated to industrial upscale and to characterize their physiochemical and biological properties. Phenylalanine-phenylalanine variants can be successfully formulated using distilled water as demonstrated here. Formulations are homogenous in shape (tubular), with apparent size (50-260 nm) and a zeta potential of up to +30 mV. L-(H2 N-FF-COOH), and D-enantiomers (H2 N-ff-COOH) demonstrate no toxicity against glioblastoma cells and are explored for ability to deliver a model hydrophilic molecule, sodium fluorescein, at pH 5.5 (tumor) and 7.4 (physiological). Peptide nanotubes loaded with >85% sodium fluorescein, demonstrate burst release characteristics, fitting the Weibull model of drug release. This research provides important data contributing to the pharmaceutical formulation of peptide nanotubes as drug delivery platforms for hydrophilic drugs.
Subject(s)
Dipeptides/chemistry , Drug Compounding , Drug Delivery Systems , Nanotubes/chemistry , Cell Line, Tumor , Circular Dichroism , Drug Liberation , Humans , Particle Size , Static ElectricityABSTRACT
Self-assembled peptides have been shown to form well-defined nanostructures which display outstanding characteristics for many biomedical applications and especially in controlled drug delivery. Such biomaterials are becoming increasingly popular due to routine, standardized methods of synthesis, high biocompatibility, biodegradability and ease of upscale. Moreover, one can modify the structure at the molecular level to form various nanostructures with a wide range of applications in the field of medicine. Through environmental modifications such as changes in pH and ionic strength and the introduction of enzymes or light, it is possible to trigger self-assembly and design a host of different self-assembled nanostructures. The resulting nanostructures include nanotubes, nanofibers, hydrogels and nanovesicles which all display a diverse range of physico-chemical and mechanical properties. Depending on their design, peptide self-assembling nanostructures can be manufactured with improved biocompatibility and in vivo stability and the ability to encapsulate drugs with the capacity for sustained drug delivery. These molecules can act as carriers for drug molecules to ferry cargo intracellularly and respond to stimuli changes for both hydrophilic and hydrophobic drugs. This review explores the types of self-assembling nanostructures, the effects of external stimuli on and the mechanisms behind the assembly process, and applications for such technology in drug delivery.
Subject(s)
Antineoplastic Agents/pharmacology , Delayed-Action Preparations/chemistry , Drug Carriers/chemistry , Hydrogels/chemistry , Nanofibers/chemistry , Nanotubes/chemistry , Antineoplastic Agents/chemistry , Antineoplastic Agents/radiation effects , Delayed-Action Preparations/administration & dosage , Delayed-Action Preparations/radiation effects , Drug Carriers/administration & dosage , Drug Compounding/methods , Humans , Hydrogels/administration & dosage , Hydrogels/radiation effects , Hydrogen Bonding , Hydrogen-Ion Concentration , Hydrophobic and Hydrophilic Interactions , Light , Nanofibers/administration & dosage , Nanofibers/radiation effects , Nanotubes/radiation effects , Neoplasms/drug therapy , Neoplasms/metabolism , Neoplasms/pathology , Osmolar Concentration , Peptides, Cyclic/chemistry , Peptides, Cyclic/pharmacology , Protein Conformation, beta-Strand , Static Electricity , TemperatureABSTRACT
Biofilms present a major problem to industry and healthcare worldwide. Composed of a population of surface-attached microbial cells surrounded by a protective extracellular polysaccharide matrix, they are responsible for increased tolerance to antibiotics, treatment failure and a resulting rise in antimicrobial resistance. Here we demonstrate that self-assembled peptide nanostructures composed of a diphenylalanine motif provide sufficient antibacterial activity to eradicate mature biofilm forms of bacteria widely implicated in hospital infections. Modification of terminal functional groups to amino (-NH2), carboxylic acid (-COOH) or both modalities, and switch to d-isomers, resulted in changes in antibacterial selectivity and mammalian cell toxicity profiles. Of the three peptide nanotubes structures studied (NH2-FF-COOH, NH2-ff-COOH and NH2-FF-NH2), NH2-FF-COOH demonstrated the most potent activity against both planktonic (liquid, free-floating) and biofilm forms of bacteria, possessing minimal mammalian cell toxicity. NH2-FF-COOH resulted in greater than 3 Log10 CFU/mL viable biofilm reduction (>99.9%) at 5â¯mg/mL and total biofilm kill at 10â¯mg/mL against Staphylococcus aureus after 24â¯h exposure. Scanning electron microscopy proved that antibiofilm activity was primarily due to the formation of ion channels and/or surfactant-like action, with NH2-FF-COOH and NH2-ff-COOH capable of degrading the biofilm matrix and disrupting cell membranes, leading to cell death in Gram-positive bacterial isolates. Peptide-based nanotubes are an exciting platform for drug delivery and engineering applications. This is the first report of using peptide nanotubes to eradicate bacterial biofilms and provides evidence of a new platform that may alleviate their negative impact throughout society. STATEMENT OF SIGNIFICANCE: We outline, for the first time, the antibiofilm activity of diphenylalanine (FF) peptide nanotubes. Biofilm bacteria exhibit high tolerance to antimicrobials 10-10,000 times that of free-flowing planktonic forms. Biofilm infections are difficult to treat using conventional antimicrobial agents, leading to a rise in antimicrobial resistance. We discovered nanotubes composed of NH2-FF-COOH demonstrated potent activity against staphylococcal biofilms implicated in hospital infections, resulting in complete kill at concentrations of 10â¯mg/mL. Carboxylic acid terminated FF nanotubes were able to destroy the exopolysaccharide architecture of staphylococcal biofilms expressing minimal toxicity, highlighting their potential for use in patients. Amidated (NH2-FF-NH2) forms demonstrated reduced antibiofilm efficacy and significant toxicity. These results contribute significantly to the development of innovative antibacterial technologies and peptide nanomaterials.
Subject(s)
Biofilms/growth & development , Nanotubes, Peptide/chemistry , Phenylalanine/analogs & derivatives , Staphylococcus aureus/drug effects , Animals , Anti-Bacterial Agents/chemistry , Anti-Infective Agents/chemistry , Carboxylic Acids/chemistry , Cell Membrane/chemistry , Cell Survival , Dipeptides , Drug Delivery Systems , Fibroblasts/metabolism , Hemolysis , Magnetic Resonance Spectroscopy , Mice , Microbial Sensitivity Tests , Microscopy, Electron, Scanning , Permeability , Phenylalanine/chemistry , Polysaccharides/chemistry , Staphylococcal Infections/drug therapyABSTRACT
In this study, thermoresponsive copolymers that are fully injectable, biocompatible, and biodegradable and are synthesized via graft copolymerization of poly(N-isopropylacrylamide) onto alginate using a free-radical reaction are presented. This new synthesis method does not involve multisteps or associated toxicity issues, and has the potential to reduce scale-up difficulties. Chemical and physical analyses verify the resultant graft copolymer structure. The lower critical solution temperature, which is a characteristic of sol-gel transition, is observed at 32 °C. The degradation properties indicate suitable degradation kinetics for drug delivery and bone tissue engineering applications. The synthesized P(Alg-g-NIPAAm) hydrogel is noncytotoxic with both human osteosarcoma (MG63) cells and porcine bone marrow derived mesenchymal stem cells (pBMSCs). pBMSCs encapsulated in the P(Alg-g-NIPAAm) hydrogel remain viable, show uniform distribution within the injected hydrogel, and undergo osteogenic and chondrogenic differentiation under appropriate culture conditions. Furthermore, for the first time, this work will explore the influence of alginate viscosity on the viscoelastic properties of the resulting copolymer hydrogels, which influences the rate of medical device formation and subsequent drug release. Together the results of this study indicate that the newly synthesized P(Alg-g-NIPAAm) hydrogel has potential to serve as a versatile and improved injectable platform for drug delivery and bone tissue engineering applications.
Subject(s)
Acrylamides/chemistry , Alginates/chemistry , Biocompatible Materials/administration & dosage , Hydrogels/chemistry , Injections , Mesenchymal Stem Cell Transplantation , Polymerization , Temperature , Glucuronic Acid/chemistry , Hexuronic Acids/chemistry , Humans , Mesenchymal Stem Cells/cytology , Proton Magnetic Resonance Spectroscopy , Spectroscopy, Fourier Transform Infrared , Thermogravimetry , ViscosityABSTRACT
A range of bone regeneration strategies, from growth factor delivery and/or mesenchymal stem cell (MSC) transplantation to endochondral tissue engineering, have been developed in recent years. Despite their tremendous promise, the clinical translation and future use of many of these strategies is being hampered by concerns such as off target effects associated with growth factor delivery. Therefore the overall objective of this study was to investigate the influence of alpha-tricalcium phosphate (α-TCP) nanoparticle delivery into MSCs using an amphipathic cell penetrating peptide RALA, on osteogenesis in vitro and both intramembranous and endochondral bone formation in vivo. RALA complexed α-TCP nanoparticle delivery to MSCs resulted in an increased expression of bone morphogenetic protein-2 (BMP-2) and an upregulation in a number of key osteogenic genes. When α-TCP stimulated MSCs were encapsulated into alginate hydrogels, enhanced mineralization of the engineered construct was observed over a 28 day culture period. Furthermore, the in vivo bone forming potential of RALA complexed α-TCP nanoparticle delivery to MSCs was found to be comparable to growth factor delivery. Recognizing the potential and limitations associated with endochondral bone tissue engineering strategies, we then sought to explore how α-TCP nanoparticle delivery to MSCs influences early mineralization of engineered cartilage templates in vitro and their subsequent ossification in vivo. Despite accelerating mineralization of engineered cartilage templates in vitro, RALA complexed α-TCP nanoparticle delivery did not enhance endochondral bone formation in vivo. Therefore the potential of RALA complexed α-TCP nanoparticle delivery appears to be as an alternative to growth factor delivery as a single stage strategy for promoting bone generation.
ABSTRACT
Bisphosphonates (BPs) are a class of bone resorptive drug with a high affinity for the hydroxyapatite structure of bone matrices that are used for the treatment of osteoporosis. However, clinical application is limited by a common toxicity, BP-related osteonecrosis of the jaw. There is emerging evidence that BPs possess anticancer potential, but exploitation of these antiproliferative properties is limited by their toxicities. We previously reported the utility of a cationic amphipathic fusogenic peptide, RALA, to traffic anionic nucleic acids into various cell types in the form of cationic nanoparticles. We hypothesized that complexation with RALA could similarly be used to conceal a BP's hydroxyapatite affinity, and to enhance bioavailability, thereby improving anticancer efficacy. Incubation of RALA with alendronate, etidronate, risedronate, or zoledronate provoked spontaneous electrostatic formation of cationic nanoparticles that did not exceed 100 nm in diameter and that were stable over a range of temperatures and for up to 6 h. The nanoparticles demonstrated a pH responsiveness, possibly indicative of a conformational change, that could facilitate release of the BP cargo in the endosomal environment. RALA/BP nanoparticles were more potent anticancer agents than their free BP counterparts in assays investigating the viability of PC3 prostate cancer and MDA-MB-231 breast cancer cells. Moreover, RALA complexation potentiated the tumor growth delay activity of alendronate in a PC3 xenograft model of prostate cancer. Taken together, these findings further validate the use of BPs as repurposed anticancer agents.
Subject(s)
Antineoplastic Agents/chemistry , Antineoplastic Agents/pharmacology , Diphosphonates/chemistry , Nanoparticles/chemistry , Peptides/chemistry , Peptides/pharmacology , Alendronate/chemistry , Alendronate/pharmacology , Alendronate/therapeutic use , Animals , Antineoplastic Agents/therapeutic use , Bone Density Conservation Agents/chemistry , Bone Density Conservation Agents/pharmacology , Bone Density Conservation Agents/therapeutic use , Cell Line, Tumor , Cell Survival/drug effects , Diphosphonates/pharmacology , Diphosphonates/therapeutic use , Humans , Imidazoles/chemistry , Imidazoles/pharmacology , Male , Mice , Prostatic Neoplasms/drug therapy , Prostatic Neoplasms/metabolism , Xenograft Model Antitumor Assays , Zoledronic AcidABSTRACT
The initial composition of acrylic bone cement along with the mixing and delivery technique used can influence its final properties and therefore its clinical success in vivo. The polymerisation of acrylic bone cement is complex with a number of processes happening simultaneously. Acrylic bone cement mixing and delivery systems have undergone several design changes in their advancement, although the cement constituents themselves have remained unchanged since they were first used. This study was conducted to determine the factors that had the greatest effect on the final properties of acrylic bone cement using a pre-filled bone cement mixing and delivery system. A design of experiments (DoE) approach was used to determine the impact of the factors associated with this mixing and delivery method on the final properties of the cement produced. The DoE illustrated that all factors present within this study had a significant impact on the final properties of the cement. An optimum cement composition was hypothesised and tested. This optimum recipe produced cement with final mechanical and thermal properties within the clinical guidelines and stated by ISO 5833 (International Standard Organisation (ISO), International standard 5833: implants for surgery-acrylic resin cements, 2002), however the low setting times observed would not be clinically viable and could result in complications during the surgical technique. As a result further development would be required to improve the setting time of the cement in order for it to be deemed suitable for use in total joint replacement surgery.
Subject(s)
Bone Cements/chemistry , Cementation , Equipment Failure Analysis/methods , Polymethyl Methacrylate/chemistry , Calibration , Cementation/methods , Cementation/standards , Compressive Strength , Glass Ionomer Cements/chemistry , Materials Testing , Porosity , Prostheses and Implants , Research Design , Stress, MechanicalABSTRACT
The design of a non-viral gene delivery vehicle capable of delivering and releasing a functional nucleic acid cargo intracellularly remains a formidable challenge. For systemic gene therapy to be successful a delivery vehicle is required that protects the nucleic acid cargo from enzymatic degradation, extravasates from the vasculature, traverses the cell membrane, disrupts the endosomal vesicles and unloads the cargo at its destination site, namely the nucleus for the purposes of gene delivery. This manuscript reports the extensive investigation of a novel amphipathic peptide composed of repeating RALA units capable of overcoming the biological barriers to gene delivery both in vitro and in vivo. Our data demonstrates the spontaneous self-assembly of cationic DNA-loaded nanoparticles when the peptide is complexed with pDNA. Nanoparticles were <100nm, were stable in the presence of serum and were fusogenic in nature, with increased peptide α-helicity at a lower pH. Nanoparticles proved to be non-cytotoxic, readily traversed the plasma membrane of both cancer and fibroblast cell lines and elicited reporter-gene expression following intravenous delivery in vivo. The results of this study indicate that RALA presents an exciting delivery platform for the systemic delivery of nucleic acid therapeutics.
Subject(s)
DNA/administration & dosage , Nanoparticles/administration & dosage , Peptides/administration & dosage , Animals , Cell Line , Cell Line, Tumor , Circular Dichroism , DNA/chemistry , Erythrocytes/drug effects , Female , Gene Transfer Techniques , Hemolysis/drug effects , Humans , Luciferases, Firefly/genetics , Luciferases, Firefly/metabolism , Mice, Inbred C57BL , Nanoparticles/chemistry , Particle Size , Peptides/chemistry , Plasmids , SheepABSTRACT
The reductive electrochemistry of substituted benzophenones in the aprotic room-temperature ionic liquid (RTIL) 1-butyl-1-methylpyrrolidinium bistriflimide occurs via two consecutive one-electron processes leading to the radical anion and dianion, respectively. The radical anion exhibited electrochemical reversibility at all time-scales whereas the dianion exhibited reversibility at potential sweep rates of >or=10 V s(-1), collectively indicating the absence of strong ion-paring with the RTIL cation. In contrast, reduction in 1-butyl-3-methylimidazolium bistriflimide is complicated by proton-transfer from the [Bmim] cation. At low potential sweep rates, reduction involves a single two-electron process characteristic of either an electrochemical, chemical, electrochemical (ECE) or disproportion-type (DISP1) mechanism. The rate of radical anion protonation in [Bmim] is governed by basicity and conforms to the Hammett free-energy relation. At higher potential sweep rates in [Bmim][NTf2], reduction occurs via two consecutive one-electron processes, giving rise to the partially reversible generation of the radical anion and the irreversible generation of the dianion, respectively. Also, the redox potentials for the reversible parent/radical anion couples were found to be a linear function of Hammett substituent constants in both RTIL media and exhibited effectively equivalent solvent-dependent reaction constants, which are similar to those for reduction in polar molecular solvents such as acetonitrile or alcohols.