ABSTRACT
BACKGROUND: Experimental coronary artery interventions are currently being performed on non-diseased blood vessels in healthy animals. To provide a more realistic pathoanatomical scenario for investigations on novel interventional and surgical therapies, we aimed to fabricate a stenotic lesion, mimicking the morphology and structure of a human atherosclerotic plaque. METHODS: In an interdisciplinary setting, we engineered a casting mold to create an atherosclerotic plaque with the dimensions to fit in a porcine coronary artery. Oscillatory rheology experiments took place along with long-term stability tests assessed by microscopic examination and weight monitoring. For the implantability in future in vivo setups, we performed a cytotoxicity assessment, inserted the plaque in resected pig hearts, and performed diagnostic imaging to visualize the plaque in its final position. RESULTS: The most promising composition consists of gelatin, cholesterol, phospholipids, hydroxyapatite, and fine-grained calcium carbonate. It can be inserted in the coronary artery of human-sized pig hearts, producing a local partial stenosis and interacting like the atherosclerotic plaque by stretching and shrinking with the vessel wall and surrounding tissue. CONCLUSION: This artificial atherosclerotic plaque model works as a simulating tool for future medical testing and could be crucial for further specified research on coronary artery disease and is going to help to provide information about the optimal interventional and surgical care of the disease.
ABSTRACT
In vivo oxygen availability varies widely between cellular microenvironments, depending on the tissue of origin and its cellular niche. It has long been known that too high or too low oxygen concentrations can act as a biological stressor. Thus, the precise control of oxygen availability should be a consideration for cell culture optimization, especially in the field of three-dimensional (3D) cell culture. In this chapter, we describe a system for visualizing oxygen limitations at a cellular level using human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) that were genetically modified to express a fluorescent hypoxia sensor. This sensor can detect the activation of hypoxia-induced factors (HIF) transcription factors that lead to the expression of the oxygen-independent fluorescent protein, UnaG, at low oxygen concentrations. The response of these hypoxia reporter cells can be evaluated in two-dimensional (2D) and 3D cultivation platforms during exposure to hypoxia (1% O2) and normoxia (21% O2) using fluorescence microscopy and flow cytometry. We show that hypoxia reporter MSCs exhibit a hypoxia-induced fluorescence signal in both 2D and 3D cultivation platforms with fast decay kinetics after reoxygenation, rendering it a valuable tool for studying the cellular microenvironment and regenerative potential of hAD-MSCs in an in vivo-like setting.
Subject(s)
Cell Culture Techniques, Three Dimensional , Hypoxia , Humans , Oxygen , Coloring Agents , Cell Culture TechniquesABSTRACT
Different parts of bones possess different properties, such as the capacity for remodeling cell content, porosity, and protein composition. For various traumatic or surgical tissue defects, the application of tissue-engineered constructs seems to be a promising strategy. Despite significant research efforts, such constructs are still rarely available in the clinic. One of the reasons is the lack of resorbable materials, whose properties can be adjusted according to the intended tissue or tissue contacts. Here, we present our first results on the development of a toolbox, by which the scaffolds with easily tunable mechanical and biological properties could be prepared. Biodegradable poly(lactic acid) and nanocrystalline cellulose methacrylated particles were obtained, characterized, and used for preparation of three-dimensional scaffolds via cryogelation and 3D printing approaches. The composition of particles-based ink for 3D printing was optimized in order to allow formation of stable materials. Both the modified-particle cytotoxicity and the matrix-supported cell adhesion were evaluated and visualized in order to confirm the perspectives of materials application.
ABSTRACT
Three-dimensional (3D) cultivation platforms allow the creation of cell models, which more closely resemble in vivo-like cell behavior. Therefore, 3D cell culture platforms have started to replace conventional two-dimensional (2D) cultivation techniques in many fields. Besides the advantages of 3D culture, there are also some challenges: cultivation in 3D often results in an inhomogeneous microenvironment and therefore unique cultivation conditions for each cell inside the construct. As a result, the analysis and precise control over the singular cell state is limited in 3D. In this work, we address these challenges by exploring ways to monitor oxygen concentrations in gelatin methacryloyl (GelMA) 3D hydrogel culture at the cellular level using hypoxia reporter cells and deep within the construct using a non-invasive optical oxygen sensing spot. We could show that the appearance of oxygen limitations is more prominent in softer GelMA-hydrogels, which enable better cell spreading. Beyond demonstrating novel or space-resolved techniques of visualizing oxygen availability in hydrogel constructs, we also describe a method to create a stable and controlled oxygen gradient throughout the construct using a 3D printed flow-through chamber.
Subject(s)
Gelatin , Hydrogels , Hydrogels/pharmacology , Oxygen , Cell Culture Techniques, Three Dimensional , Methacrylates , Tissue Engineering/methodsABSTRACT
Hydrogels are hydrated polymers that are able to mimic many of the properties of living tissues. For this reason, they have become a popular choice of biomaterial in many biomedical applications including tissue engineering, drug delivery, and biosensing. The physical and biological requirements placed on hydrogels in these contexts are numerous and require a tunable material, which can be adapted to meet these demands. Tunability is defined as the use of knowledge-based tools to manipulate material properties in the desired direction. Engineering of suitable mechanical properties and integrating bioactivity are two major aspects of modern hydrogel design. Beyond these basic features, hydrogels can be tuned to respond to specific environmental cues and external stimuli, which are provided by surrounding cells or by the end user (patient, clinician, or researcher). This turns tunable hydrogels into stimulus-responsive smart materials, which are able to display adaptable and dynamic properties. In this book chapter, we will first shortly cover the foundation of hydrogel tunability, related to mechanical properties and biological functionality. Then, we will move on to stimulus-responsive hydrogel systems and describe their basic design, as well as give examples of their application in diverse biomedical fields. As both the understanding of underlying biological mechanisms and our engineering capacity mature, even more sophisticated tunable hydrogels addressing specific therapeutic goals will be developed.
Subject(s)
Hydrogels , Smart Materials , Biocompatible Materials , Humans , Polymers , Tissue EngineeringABSTRACT
This paper analyzes the use of animal-component free chromatographic materials for the efficient purification of the human fibroblast growth factor 2 (hFGF-2). hFGF-2 is produced in Escherichia coli and purified via three different chromatography steps, which include a strong cation exchange chromatography as a capture step, followed by heparin affinity chromatography and an anion exchange chromatography as a polishing step. The affinity chromatography step is based on the animal-derived material heparin. Chemically produced ligands provide a viable alternative to animal-derived components in production processes, since they are characterized by a defined structure which leads to reproducible results and a broad range of applications. The alternative ligands can be assigned to adsorber of the mixed-mode chromatography (MMC) and pseudo-affinity chromatography. Eight different animal-component free materials used as adsorbers in MMC or pseudo-affinity chromatography were tested as a substitute for heparin. The MMCs were cation exchangers characterized with further functional residues. The ligands of the pseudo-affinity chromatography were heparin-like ligands which are based on heparin's molecular structure. The alternative methods were tested as a capture step and in combination with another chromatographic step in the purification procedure of hFGF-2. In each downstream step purity, recovery and yield were analysed and compared to the conventional downstream process. Two types of MMC - the column ForesightTM NuviaTM cPrimeTM from Bio-Rad Laboratories and the column HiTrapTM CaptoTM MMC from GE Healthcare Life Sciences - can be regarded as effective animal-component free alternatives to the heparin - based adsorber.
Subject(s)
Fibroblast Growth Factor 2/isolation & purification , Adsorption , Animals , Chromatography, Affinity , Chromatography, Ion Exchange , Heparin/chemistry , Humans , LigandsABSTRACT
The growth of microorganisms on surfaces and interfaces as a biofilm is very common and plays important role in various areas such as material science, biomedicine, or waste treatment among others. Due to their inhomogeneous structure and the variance in the microorganism consortium, the analysis of biofilms represents a significant challenge. An online fluorescence sensor was developed that is able to measure the most important biological fluorophores (proteins, nicotinamide adenine dinucleotide, and flavin) in a noninvasive manner in biofilms, e.g. in bioelectrochemical applications. The sensor gives the opportunity to continuously draw conclusions on the metabolic state of the biofilm. The developed sensor has a diameter of 1 mm at the sensor tip and can be moved on and into the biofilm surface. In the first experiment, the measuring range of the sensor and the long-term stability could be determined and the system applicability was confirmed. In addition, measurements in biofilm-like structures could be performed. The formation of a wastewater-based biofilm was monitored using the developed sensor, demonstrating the functionality of the sensor in a proof-of-principle experiment.
ABSTRACT
Natural oxygen gradients occur in tissues of biological organisms and also in the context of three-dimensional (3D) in vitro cultivation. Oxygen diffusion limitation and metabolic oxygen consumption by embedded cells produce areas of hypoxia in the tissue/matrix. However, reliable systems to detect oxygen gradients and cellular response to hypoxia in 3D cell culture systems are still missing. In this study, we developed a system for visualization of oxygen gradients in 3D using human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) modified to stably express a fluorescent genetically engineered hypoxia sensor HRE-dUnaG. Modified cells retained their stem cell characteristics in terms of proliferation and differentiation capacity. The hypoxia-reporter cells were evaluated by fluorescence microscopy and flow cytometry under variable oxygen levels (2.5%, 5%, and 7.5% O2 ). We demonstrated that reporter hAD-MSCs output is sensitive to different oxygen levels and displays fast decay kinetics after reoxygenation. Additionally, the reporter cells were encapsulated in bulk hydrogels with a variable cell number, to investigate the sensor response in model 3D cell culture applications. The use of hypoxia-reporting cells based on MSCs represents a valuable tool for approaching the genuine in vivo cellular microenvironment and will allow a better understanding of the regenerative potential of AD-MSCs.
Subject(s)
Biosensing Techniques/methods , Cell Culture Techniques, Three Dimensional/methods , Cell Hypoxia/physiology , Mesenchymal Stem Cells , Cell Differentiation/physiology , Cells, Cultured , Humans , Hydrogels/chemistry , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/metabolism , Mesenchymal Stem Cells/physiologyABSTRACT
Many properties in both healthy and pathological tissues are highly influenced by the mechanical properties of the extracellular matrix. Stiffness gradient hydrogels are frequently used for exploring these complex relationships in mechanobiology. In this study, the fabrication of a simple, cost-efficient, and versatile system is reported for creation of stiffness gradients from photoactive hydrogels like gelatin-methacryloyl (GelMA). The setup includes syringe pumps for gradient generation and a 3D printed microfluidic device for homogenous mixing of GelMA precursors with different crosslinker concentration. The stiffness gradient is investigated by using rheology. A co-culture consisting of human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) and human umbilical cord vein endothelial cells (HUVECs) is encapsulated in the gradient construct. It is possible to locate the stiffness ranges at which the studied cells displayed specific spreading morphology and migration rates. With the help of the described system, variable mechanical gradient constructs can be created and optimal 3D cell culture conditions can be experientially identified.
Subject(s)
Gelatin/chemistry , Hydrogels/chemistry , Methacrylates/chemistry , Microtechnology/instrumentation , Printing, Three-Dimensional , Cell Movement , Cross-Linking Reagents/chemistry , Fluorescence , Human Umbilical Vein Endothelial Cells/cytology , Humans , Kinetics , Mesenchymal Stem Cells/cytologyABSTRACT
In vitro two-dimensional (2D) and three-dimensional (3D) cultivation of mammalian cells requires supplementation with serum. Mesenchymal stem cells (MSCs) are widely used in clinical trials for bioregenerative medicine and in most cases, in vitro expansion and differentiation of these cells are required before application. Optimized expansion and differentiation protocols play a key role in the treatment outcome. 3D cell cultivation systems are more comparable to in vivo conditions and can provide both, more physiological MSC expansion and a better understanding of intercellular and cell-matrix interactions. Xeno-free cultivation conditions minimize risks of immune response after implantation. Human platelet lysate (hPL) appears to be a valuable alternative to widely used fetal calf serum (FCS) since no ethical issues are associated with its harvest, it contains a high concentration of growth factors and cytokines and it can be produced from expired platelet concentrate. In this study, we analyzed and compared proliferation, as well as osteogenic and chondrogenic differentiation of human adipose tissue-derived MSCs (hAD-MSC) using three different supplements: FCS, human serum (HS), and hPL in 2D. Furthermore, online monitoring of osteogenic differentiation under the influence of different supplements was performed in 2D. hPL-cultivated MSCs exhibited a higher proliferation and differentiation rate compared to HS- or FCS-cultivated cells. We demonstrated a fast and successful chondrogenic differentiation in the 2D system with the addition of hPL. Additionally, FCS, HS, and hPL were used to formulate Gelatin-methacryloyl (GelMA) hydrogels in order to evaluate the influence of the different supplements on the cell spreading and proliferation of cells growing in 3D culture. In addition, the hydrogel constructs were cultivated in media supplemented with three different supplements. In comparison to FCS and HS, the addition of hPL to GelMA hydrogels during the encapsulation of hAD-MSCs resulted in enhanced cell spreading and proliferation. This effect was promoted even further by cultivating the hydrogel constructs in hPL-supplemented media.
ABSTRACT
Proteins derived from the natural extracellular matrix like collagen or gelatin are common in clinical research, where they are prized for their biocompatibility and bioactivity. Cells are able to adhere, grow and remodel scaffolds based on these materials. Usually, collagen and gelatin are sourced from animal material, risking pathogenic transmission and inconsistent batch-to-batch product quality. A recombinant production in yeast circumvents these disadvantages by ensuring production with a reproducible quality in animal-component-free media. A gelatin mimetic protein, based on the alpha chain of human collagen I, was cloned in Pichia pastoris under the control of the methanol-inducible alcohol oxidase (AOX1) promoter. A producing clone was selected and cultivated at the 30 L scale. The protein was secreted into the cultivation medium and the final yield was 3.4 g·L-1. Purification of the target was performed directly from the cell-free medium by size exclusion chromatography. The gelatin mimetic protein was tested in cell culture for biocompatibility and for promoting cell adhesion. It supported cell growth and its performance was indistinguishable from animal-derived gelatin. The gelatin-mimetic protein represents a swift strategy to produce recombinant and human-based extracellular matrix proteins for various biomedical applications.
ABSTRACT
Three-dimensional (3D) cell culture is a major focus of current research, since cultivation under physiological conditions provides more reliable information about in vivo cell behavior. 3D cell cultures are used in basic research to better understand intercellular and cell-matrix interactions. However, 3D cell culture plays an increasingly important role in the in vitro testing of bioactive substances and tissue engineering. Gelatin-methacryloyl (GelMA) hydrogels of different degrees of functionalization (DoFs) are a versatile tool for 3D cell culture and related applications such as bioprinting. Human platelet lysate (hPL) has already demonstrated positive effects on 2D cell cultures of different cell types and has proven a valuable alternative to fetal calf serum (FCS). Traditionally, all hydrogels are formulated using buffers. In this study, we supplemented GelMA hydrogels of different DoF with hPL during adipose tissue-derived mesenchymal stem cell (AD-MSCs) encapsulation. We studied the effect of hPL supplementation on the spreading, proliferation, and osteogenic differentiation of AD-MSCs. In addition, the influence of hPL on hydrogel properties was also investigated. We demonstrate that the addition of hPL enhanced AD-MSC spreading, proliferation, and osteogenic differentiation in a concentration-dependent manner. Moreover, the addition of hPL also increased GelMA viscosity and stiffness.
ABSTRACT
Three-dimensional (3D)-bioprinting enables scientists to mimic in vivo micro-environments and to perform in vitro cell experiments under more physiological conditions than is possible with conventional two-dimensional (2D) cell culture. Cell-laden biomaterials (bioinks) are precisely processed to bioengineer tissue three-dimensionally. One primarily used matrix material is sodium alginate. This natural biopolymer provides both fine mechanical properties when gelated and high biocompatibility. Commonly, alginate is 3D bioprinted using extrusion based devices. The gelation reaction is hereby induced by a CaCl2 solution in the building chamber after material extrusion. This established technique has two main disadvantages: (1) CaCl2 can have toxic effects on the cell-laden hydrogels by oxygen diffusion limitation and (2) good printing resolution in the CaCl2 solution is hard to achieve, since the solution needs to be removed afterwards and substituted by cell culture media. Here, we show an innovative approach of alginate bioprinting based on a CaCl2 nebulizer. The device provides CaCl2 mist to the building platform inducing the gelation. The necessary amount of CaCl2 could be decreased as compared to previous gelation strategies and limitation of oxygen transfer during bioprinting can be reduced. The device was manufactured using the MJP-3D printing technique. Subsequently, its digital blueprint (CAD file) can be modified and additive manufactured easily and mounted in various extrusion bioprinters. With our approach, a concept for a more gentle 3D Bioprinting method could be shown. We demonstrated that the concept of an ultrasound-based nebulizer for CaCl2 mist generation can be used for 3D bioprinting and that the mist-induced polymerization of alginate hydrogels of different concentrations is feasible. Furthermore, different cell-laden alginate concentrations could be used: Cell spheroids (mesenchymal stem cells) and single cells (mouse fibroblasts) were successfully 3D printed yielding viable cells and stable hydrogels after 24 h cultivation. We suggest our work to show a different and novel approach on alginate bioprinting, which could be useful in generating cell-laden hydrogel constructs for e.g., drug screening or (soft) tissue engineering applications.
ABSTRACT
Gelatin-methacryloyl (GelMA) is a semi-synthetic hydrogel which consists of gelatin derivatized with methacrylamide and methacrylate groups. These hydrogels provide cells with an optimal biological environment (e.g., RGD motifs for adhesion) and can be quickly photo-crosslinked, which provides shape fidelity and stability at physiological temperature. In the present work, we demonstrated how GelMA hydrogels can be synthesized with a specific degree of functionalization (DoF) and adjusted to the intended application as a three-dimensional (3D) cell culture platform. The focus of this work lays on producing hydrogel scaffolds which provide a cell promoting microenvironment for human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) and are conductive to their adhesion, spreading, and proliferation. The control of mechanical GelMA properties by variation of concentration, DoF, and ultraviolet (UV) polymerization conditions is described. Moreover, hAD-MSC cell viability and morphology in GelMA of different stiffness was evaluated and compared. Polymerized hydrogels with and without cells could be digested in order to release encapsulated cells without loss of viability. We also demonstrated how hydrogel viscosity can be increased by the use of biocompatible additives, in order to enable the extrusion bioprinting of these materials. Taken together, we demonstrated how GelMA hydrogels can be used as a versatile tool for 3D cell cultivation.
ABSTRACT
Biologically active human bone morphogenetic protein-4 (hBMP-4) was successfully produced in a prokaryotic host. For this aim, hBMP-4 cDNA was cloned in Escherichia coli (E. coli) and the protein was produced in a non-active aggregated form. After washing and solubilization, in vitro refolding of the rhBMP-4 monomer was performed using rapid dilution. In this study, different refolding conditions were tested for the dimerization of rhBMP-4 by one-factor-at-a-time variation. The dimerization process was found to be sensitive to pH, protein concentration and the presence of aggregation suppressors. In contrast, redox conditions and ionic strength did not impact refolding as expected. The dimer was separated from the remaining monomer, aggregates and host cell contaminants in a single step using cation-exchange membrane chromatography. The rhBMP-4 dimer produced in E. coli was biologically active as demonstrated by its capability to induce trophoblast differentiation and primitive streak induction of human pluripotent stem cells (hPSCs).
ABSTRACT
BACKGROUND: AmbLOXe is a lipoxygenase, which is up-regulated during limb-redevelopment in the Mexican axolotl, Ambystoma mexicanum, an animal with remarkable regeneration capacity. Previous studies have shown that mammalian cells transformed with the gene of this epidermal lipoxygenase display faster migration and wound closure rate during in vitro wound healing experiments. RESULTS: In this study, the gene of AmbLOXe was codon-optimized for expression in Escherichia coli and was produced in the insoluble fraction as protein aggregates. These inclusion bodies or nanopills were shown to be reservoirs containing functional protein during in vitro wound healing assays. For this purpose, functional inclusion bodies were used to coat cell culture surfaces prior cell seeding or were added directly to the medium after cells reached confluence. In both scenarios, AmbLOXe inclusion bodies led to faster migration rate and wound closure, in comparison to controls containing either no AmbLOXe or GFP inclusion bodies. CONCLUSIONS: Our results demonstrate that AmbLOXe inclusion bodies are functional and may serve as stable reservoirs of this enzyme. Nevertheless, further studies with soluble enzyme are also necessary in order to start elucidating the exact molecular substrates of AmbLOXe and the biochemical pathways involved in the wound healing effect.
Subject(s)
Inclusion Bodies/physiology , Lipoxygenase/genetics , Wound Healing , Ambystoma mexicanum/physiology , Animals , Cell Line , Escherichia coli , Extremities/physiology , Humans , Keratinocytes/physiology , Protein Aggregates/genetics , RegenerationABSTRACT
In this study, we present the development of a process for the purification of recombinant human bone morphogenetic protein-2 (rhBMP-2) using mixed-mode membrane chromatography. RhBMP-2 was produced as inclusion bodies in Escherichia coli. In vitro refolding using rapid dilution was carried out according to a previously established protocol. Different membrane chromatography phases were analyzed for their ability to purify BMP-2. A membrane phase with salt-tolerant properties resulting from mixed-mode ligand chemistry was able to selectively purify BMP-2 dimer from refolding mixtures. No further purification or polishing steps were necessary and high product purity was obtained. The produced BMP-2 exhibited a biological activity of 7.4 × 105 U/mg, comparable to commercial preparations. Mixed-mode membrane chromatography can be a valuable tool for the direct purification of proteins from solutions with high-conductivity, for example refolding buffers. In addition, in this particular case, it allowed us to circumvent the use of heparin-affinity chromatography, thus allowing the design of an animal-component-free process.
Subject(s)
Bone Morphogenetic Protein 2/isolation & purification , Bone Morphogenetic Protein 2/metabolism , Chromatography/methods , Protein Folding , Recombinant Proteins/isolation & purification , Recombinant Proteins/metabolism , Escherichia coli/metabolism , HumansABSTRACT
Hydrogels have become one of the most popular platforms for three-dimensional (3D) cultivation of mammalian cells. The enormous versatility of hydrogel materials makes it possible to design scaffolds with predefined mechanical properties, as well as with desired biofunctionality. 3D hydrogel constructs have been used for a variety of applications, including tissue engineering of microorgan systems, drug delivery, cytotoxicity testing, and drug screening. Moreover, 3D culture is applied for investigating cellular physiology, stem cell differentiation, and tumor models and for studying interaction mechanisms between the extracellular matrix and cells. In this paper, we review current examples of performance-based hydrogel design for 3D cell culture applications. A major emphasis is placed on a description of how standard analytical protocols and imaging techniques are being adapted to analysis of 3D cell culture in hydrogel systems.