On the Analyses of Cure Cycle Effects on Peel Strength Characteristics in Carbon High-Tg Epoxy/Plasma-Activated Carbon PEEK Composite Interfaces: A Preliminary Inquiry.

In this study, a high-Tg aerospace-grade epoxy composite plate was co-curing welded using a unidirectional PEEK thermoplastic carbon fibre tape to develop advanced composite joints. To account for the surface roughness and the weldability of carbon-epoxy/carbon-PEEK composites, plasma treatments were performed. The co-curing was conducted by the following steps: each treated thermoplastic tape was first placed in the mould, and followed by nine layers of dry-woven carbon fabrics. The mould was sealed using a vacuum bag, and a bi-component thermoset (RTM6) impregnated the preform. To understand the role of curing kinetics, post-curing, curing temperature, and dwell time on the quality of joints, five cure cycles were programmed. The strengths of the welded joints were investigated via the interlayer peeling test. Furthermore, cross-sections of welded zones were assessed using scanning electron microscopy in terms of the morphology of the PEEK/epoxy interphase after co-curing. The preliminary results showed that the cure cycle is an important controlling parameter for crack propagation. A noticeable distinction was evident between the samples cured first at 140 °C for 2 h and then at 180 °C for 2 h, and those cured initially at 150 °C for 2 h followed by 180 °C for 2 h. In other words, the samples subjected to the latter curing conditions exhibited consistently reproducible results with minimal errors compared to different samples. The reduced errors confirmed the reproducibility of these samples, indicating that the adhesion between CF/PEEK and CF/RTM6 tends to be more stable in this curing scenario.

The self and the Bayesian brain: Testing probabilistic models of body ownership through a self-localization task.

Simple multisensory manipulations can induce the illusory misattribution of external objects to one's own body, allowing to experimentally investigate body ownership. In this context, body ownership has been conceptualized as the result of the online Bayesian optimal estimation of the probability that one object belongs to the body from the congruence of multisensory inputs. This idea has been highly influential, as it provided a quantitative basis to bottom-up accounts of self-consciousness. However, empirical evidence fully supporting this view is scarce, as the optimality of the putative inference process has not been assessed rigorously. This pre-registered study aimed at filling this gap by testing a Bayesian model of hand ownership based on spatial and temporal visuo-proprioceptive congruences. Model predictions were compared to data from a virtual-reality reaching task, whereby reaching errors induced by a spatio-temporally mismatching virtual hand have been used as an implicit proxy of hand ownership. To rigorously test optimality, we compared the Bayesian model versus alternative non-Bayesian models of multisensory integration, and independently assess unisensory components and compare them to model estimates. We found that individually measured values of proprioceptive precision correlated with those fitted from our reaching task, providing compelling evidence that the underlying visuo-proprioceptive integration process approximates Bayesian optimality. Furthermore, reaching errors correlated with explicit ownership ratings at the single individual and trial level. Taken together, these results provide novel evidence that body ownership, a key component of self-consciousness, can be truly described as the bottom-up, behaviourally optimal processing of multisensory inputs.

On the Addition of Multifunctional Methacrylate Monomers to an Acrylic-Based Infusible Resin for the Weldability of Acrylic-Based Glass Fibre Composites.

The melt strength of Elium® acrylic resin is an important factor to ensure limited fluid flow during welding. To provide Elium® with a suitable melt strength via a slight crosslink, this study examines the effect of two dimethacrylates, namely butanediol-di-methacrylate (BDDMA) and tricyclo-decane-dimethanol-di-methacrylate (TCDDMDA), on the weldability of acrylic-based glass fibre composites. The resin system impregnating a five-layer woven glass preform is a mixture of Elium® acrylic resin, an initiator, and each of the multifunctional methacrylate monomers in the range of 0 to 2 parts per hundred resin (phr). Composite plates are manufactured by vacuum infusion (VI) at an ambient temperature and welded by using the infrared (IR) welding technique. The mechanical thermal analysis of the composites containing multifunctional methacrylate monomers higher than 0.25 phr shows a very little strain for the temperature range of 50 °C to 220 °C. The quantity of 0.25 phr of both of the multifunctional methacrylate monomers in the Elium® matrix improves the maximum bound shear strength of the weld by 50% compared to those compositions without the multifunctional methacrylate monomers.

On the Hot-Plate Welding of Reactively Compatibilized Acrylic-Based Composites/Polyamide (PA)-12.

Joining of dissimilar thermoplastics and their composites is a challenge for thermal welding techniques due to different melting points. Reactive welding with an auxiliary functional material can offer the clear opportunities to develop joining processes due to robustness to joining dissimilar thermoplastic polymers and their composites. The current study employed reactive compatibilization to offer the possibility of joining an acrylic-based glass fiber composite to polyamide (PA)-12 by applying a hot-tool welding technique. For this purpose, composite plates are fabricated by a typical vacuum infusion and thin layer thermoplastic films are formed by a thermostamping of PA12 granules. Subsequently, the reactive welding of the interposed PA12 sheet and Elium®-GMA-Glass composite is conducted by hot-plate welding. A glycidyl methacrylate (GMA) as a compatibilizing agent is copolymerized with methyl methacrylate Elium® resin. During the hot-tool welding process of dissimilar thermoplastic material, GMA can react with the polyamide end groups. The heat distribution at the Elium® GMA/PA-12 interface is responsible for obtaining a strong joint. This study focuses on the functionality of the compatibilizer on the welding of acrylic-based composites with polyamide (PA)-12 while varying the assembly temperature. The flatwise tensile test proved the effectiveness of GMA on the interface bounding. The excellent bounding incompatible polymers Elium® resin (PMMA) and PA12 was achieved at 200 °C.

Virtual reality-based sensorimotor adaptation shapes subsequent spontaneous and naturalistic stimulus-driven brain activity.

Our everyday life summons numerous novel sensorimotor experiences, to which our brain needs to adapt in order to function properly. However, tracking plasticity of naturalistic behavior and associated brain modulations is challenging. Here, we tackled this question implementing a prism adaptation-like training in virtual reality (VRPA) in combination with functional neuroimaging. Three groups of healthy participants (N = 45) underwent VRPA (with a shift either to the left/right side, or with no shift), and performed functional magnetic resonance imaging (fMRI) sessions before and after training. To capture modulations in free-flowing, task-free brain activity, the fMRI sessions included resting-state and free-viewing of naturalistic videos. We found significant decreases in spontaneous functional connectivity between attentional and default mode (DMN)/fronto-parietal networks, only for the adaptation groups, more pronouncedly in the hemisphere contralateral to the induced shift. In addition, VRPA was found to bias visual responses to naturalistic videos: Following rightward adaptation, we found upregulation of visual response in an area in the parieto-occipital sulcus (POS) only in the right hemisphere. Notably, the extent of POS upregulation correlated with the size of the VRPA-induced after-effect measured in behavioral tests. This study demonstrates that a brief VRPA exposure can change large-scale cortical connectivity and correspondingly bias visual responses to naturalistic sensory inputs.

Fused Filament Fabrication of Polymers and Continuous Fiber-Reinforced Polymer Composites: Advances in Structure Optimization and Health Monitoring.

3D printed neat thermoplastic polymers (TPs) and continuous fiber-reinforced thermoplastic composites (CFRTPCs) by fused filament fabrication (FFF) are becoming attractive materials for numerous applications. However, the structure of these materials exhibits interfaces at different scales, engendering non-optimal mechanical properties. The first part of the review presents a description of these interfaces and highlights the different strategies to improve interfacial bonding. The actual knowledge on the structural aspects of the thermoplastic matrix is also summarized in this contribution with a focus on crystallization and orientation. The research to be tackled to further improve the structural properties of the 3D printed materials is identified. The second part of the review provides an overview of structural health monitoring technologies relying on the use of fiber Bragg grating sensors, strain gauge sensors and self-sensing. After a brief discussion on these three technologies, the needed research to further stimulate the development of FFF is identified. Finally, in the third part of this contribution the technology landscape of FFF processes for CFRTPCs is provided, including the future trends.

Combined virtual reality and haptic robotics induce space and movement invariant sensorimotor adaptation.

Prism adaptation is a method for studying visuomotor plasticity in healthy individuals, as well as for rehabilitating patients suffering spatial neglect. We developed a new set-up based on virtual-reality (VR) and haptic-robotics allowing us to induce sensorimotor adaptation and to reproduce the effect of prism adaptation in a more ecologically valid, yet experimentally controlled context. Participants were exposed to an immersive VR environment while controlling a virtual hand via a robotic-haptic device to reach virtual objects. During training, a rotational shift was induced between the position of the participant's real hand and that of the virtual hand in order to trigger sensorimotor recalibration. The use of VR and haptic-robotics allowed us to simulate and test multiple components of sensorimotor adaptation: training either peripersonal or extrapersonal space and testing generalization for the non-trained sector of space, and using active versus robot-guided reaching movements. Results from 60 neurologically intact participants show that participants exposed to the virtual shift were able to quickly adapt their reaching movements to aim correctly at the target objects. When the shift was removed, participants showed a systematic deviation of their movements during open-loop tasks in the direction opposite to that of the shift, which generalized to un-trained portions of space and occurred also when their movements were robotically-guided during the adaptation. Interestingly, follow-up questionnaires revealed that when the adaptation training was robotically-guided, participants were largely unaware of the mismatch between their hand and the virtual hand's position. The stability of the aftereffects, despite the changing experimental parameters, suggests that the induced sensory-motor adaptation does not rely on low-level processing of sensory stimuli during the training, but taps into high-level representations of space. Importantly, the flexibility of the trained space and the option of robotically-guided movements open novel possibilities of fine-tuning the training to patients' level of spatial and motor impairment, thus possibly resulting in a better outcome.