ABSTRACT
We present results of numerical analysis of the Strehl ratio characteristics for the light sword optical element (LSOE). For comparison there were analyzed other optical imaging elements proposed for compensation of presbyopia such as the bifocal lens, the trifocal lens, the stenopeic contact lens, and elements with extended depth of focus (EDOF), such as the logarithmic and quartic axicons. The simulations were based on a human eye's model being a simplified version of the Gullstrand model. The results obtained allow to state that the LSOE exhibits much more uniform characteristics of the Strehl ratio comparing with other known hitherto elements and therefore it could be a promising aid to compensate for the insufficient accommodation range of the human eye.
Subject(s)
Eyeglasses , Lenses , Presbyopia/rehabilitation , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Humans , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
The paper analyzes the imaging properties of the light sword optical element (LSOE) applied as a contact lens to the presbyopic human eye. We performed our studies with a human eye model based on the Gullstrand parameterization. In order to quantify the discussion concerning imaging with extended depth of focus, we introduced quantitative parameters characterizing output images of optotypes obtained in numerical simulations. The quality of the images formed by the LSOE were compared with those created by a presbyopic human eye, reading glasses and a quartic inverse axicon. Then we complemented the numerical results by an experiment where a 3D scene was imaged by means of the refractive LSOE correcting an artificial eye based on the Gullstrand model. According to performed simulations and experiments the LSOE exhibits abilities for presbyopia correction in a wide range of functional vision distances.
Subject(s)
Contact Lenses , Eye/physiopathology , Models, Biological , Presbyopia/physiopathology , Presbyopia/rehabilitation , Therapy, Computer-Assisted/methods , Computer Simulation , Equipment Failure Analysis , Humans , Prosthesis DesignABSTRACT
The paper presents first experiments with a refractive light sword optical element (LSOE). A refractive version of the LSOE was prepared in photoresist by gray scale photolithography. Then we examined chromatic aberrations of the produced element and compared them with those corresponding to two different lenses. For this purpose we performed two experiments, the first one where white light illumination was used and the latter one by the help of monochromatic illumination with three different wavelengths. The obtained results lead to the conclusion that the refractive LSOE does not exhibit significant chromatic aberrations and can be successfully used for imaging with extended depth of focus in polychromatic illumination.
ABSTRACT
The paper presents imaging properties of modified lenses with the radial and the angular modulation. We analyze three following optical elements with moderate numerical apertures: the forward logarithmic axicon and the axilens representing the radial modulation as well as the light sword optical element being a counterpart of the axilens with the angular modulation. The abilities of the elements for imaging with extended depth of focus are discussed in detail with the help of structures of output images and modulation transfer functions corresponding to them. According to the obtained results only the angular modulation of the lens makes possible to maintain the acceptable resolution, contrast and brightness of the output images for a wide range of defocusing. Therefore optical elements with angular modulations and moderate numerical apertures seem to be especially suitable for imaging with extended focal depth.
