ABSTRACT
An ever-present limitation of transmission electron microscopy is the damage caused by high-energy electrons interacting with any sample. By reconsidering the fundamentals of imaging, we demonstrate an event-responsive approach to electron microscopy that delivers more information about the sample for a given beam current. Measuring the time to achieve an electron count threshold rather than waiting a predefined constant time improves the information obtained per electron. The microscope was made to respond to these events by blanking the beam, thus reducing the overall dose required. This approach automatically apportions dose to achieve a given signal-to-noise ratio in each pixel, eliminating excess dose that is associated with diminishing returns of information. We demonstrate the wide applicability of our approach to beam-sensitive materials by imaging biological tissue and zeolite.
ABSTRACT
With the recent progress in the development of detectors in electron microscopy, it has become possible to directly count the number of electrons per pixel, even with a scintillator-type detector, by incorporating a pulse-counting module. To optimize a denoising method for electron counting imaging, in this study, we propose a Poisson denoising method for atomic-resolution scanning transmission electron microscopy images. Our method is based on the Markov random field model and Bayesian inference, and we can reduce the electron dose by a factor of about 15 times or further below. Moreover, we showed that the method of reconstruction from multiple images without integrating them performs better than that from an integrated image.
ABSTRACT
Transmission electron microscopy is a pivotal instrument in materials and biological sciences due to its ability to provide local structural and spectroscopic information on a wide range of materials. However, the electron detectors used in scanning transmission electron microscopy are often unable to provide quantified information, that is the number of electrons impacting the detector, without exhaustive calibration and processing. This results in arbitrary signal values with slow response times that cannot be used for quantification or comparison to simulations. Here we demonstrate and optimise a hardware signal processing approach to augment electron detectors to perform single electron counting.
ABSTRACT
Fast frame rates are desirable in scanning transmission electron microscopy for a number of reasons: controlling electron beam dose, capturing in situ events, or reducing the appearance of scan distortions. While several strategies exist for increasing frame rates, many impact image quality or require investment in advanced scan hardware. Here, we present an interlaced imaging approach to achieve minimal loss of image quality with faster frame rates that can be implemented on many existing scan controllers. We further demonstrate that our interlacing approach provides the best possible strain precision for a given electron dose compared with other contemporary approaches.
ABSTRACT
With increasing interest in high-speed imaging, there should be an increased interest in the response times of our scanning transmission electron microscope detectors. Previous works have highlighted and contrasted the performance of various detectors for quantitative compositional or structural studies, but here, we shift the focus to detector temporal response, and the effect this has on captured images. The rise and decay times of eight detectors' single-electron response are reported, as well as measurements of their flatness, roundness, smoothness, and ellipticity. We develop and apply a methodology for incorporating the temporal detector response into simulations, showing that a loss of resolution is apparent in both the images and their Fourier transforms. We conclude that the solid-state detector outperforms the photomultiplier tube-based detectors in all areas bar a slightly less elliptical central hole and is likely the best detector to use for the majority of applications. However, using the tools introduced here, we encourage users to effectively evaluate which detector is most suitable for their experimental needs.
ABSTRACT
Low-voltage transmission electron microscopy (≤80 kV) has many applications in imaging beam-sensitive samples, such as metallic nanoparticles, which may become damaged at higher voltages. To improve resolution, spherical aberration can be corrected for in a scanning transmission electron microscope (STEM); however, chromatic aberration may then dominate, limiting the ultimate resolution of the microscope. Using image simulations, we examine how a chromatic aberration corrector, different objective lenses, and different beam energy spreads each affect the image quality of a gold nanoparticle imaged at low voltages in a spherical aberration-corrected STEM. A quantitative analysis of the simulated examples can inform the choice of instrumentation for low-voltage imaging. We here demonstrate a methodology whereby the optimum energy spread to operate a specific STEM can be deduced. This methodology can then be adapted to the specific sample and instrument of the reader, enabling them to make an informed economical choice as to what would be most beneficial for their STEM in the cost-conscious landscape of scientific infrastructure.
ABSTRACT
Ferroics, especially ferromagnets, can form complex topological spin structures such as vortices1 and skyrmions2,3 when subjected to particular electrical and mechanical boundary conditions. Simple vortex-like, electric-dipole-based topological structures have been observed in dedicated ferroelectric systems, especially ferroelectric-insulator superlattices such as PbTiO3/SrTiO3, which was later shown to be a model system owing to its high depolarizing field4-8. To date, the electric dipole equivalent of ordered magnetic spin lattices driven by the Dzyaloshinskii-Moriya interaction (DMi)9,10 has not been experimentally observed. Here we examine a domain structure in a single PbTiO3 epitaxial layer sandwiched between SrRuO3 electrodes. We observe periodic clockwise and anticlockwise ferroelectric vortices that are modulated by a second ordering along their toroidal core. The resulting topology, supported by calculations, is a labyrinth-like pattern with two orthogonal periodic modulations that form an incommensurate polar crystal that provides a ferroelectric analogue to the recently discovered incommensurate spin crystals in ferromagnetic materials11-13. These findings further blur the border between emergent ferromagnetic and ferroelectric topologies, clearing the way for experimental realization of further electric counterparts of magnetic DMi-driven phases.
ABSTRACT
Image simulation in electron microscopy is vital for advanced image analysis but can be prohibitively long. This is especially true when including thermal diffuse scattering through the frozen phonon method, requiring repeat simulations for a number of phonon configurations. Here a method of reducing frozen phonon simulation time is demonstrated by emulating random phonon displacements through randomly mixing a set of precalculated static potentials. This avoids excessive recalculation of atom potentials and can lead to significant time improvement. The validity and limitations of this method are also demonstrated with respect to convergent beam electron diffraction and scanning transmission electron microscopy.
ABSTRACT
Ferroelectric-paraelectric superlattices show emerging new states, such as polar vortices, through the interplay and different energy scales of various thermodynamic constraints. By introducing magnetic coupling at BiFeO3-La0.7Sr0.3MnO3 interfaces epitaxially grown on SrTiO3 substrate, we find, for the first time in thin films, a sub-nanometer thick lamella-like BiFeO3. The emergent phase is characterized by an arrangement of a two unit cell thick lamella-like structure featuring antiparallel polarization, resulting an antiferroelectric-like structure typically associated with a morphotropic phase transition. The antipolar phase is embedded within a nominal R3c structure and is independent of the BiFeO3 thickness (4-30 unit cells). Moreover, the superlattice structure with the morphotropic phase demonstrates azimuth-independent second harmonic generation responses, indicating a change of overall symmetry mediated by a delicate spatial distribution of the emergent phase. This work enriches the understanding of a metastable state manipulated by thermodynamic constraints by lattice strain and magnetic coupling.
ABSTRACT
When approaching the atomically thin limit, defects and disorder play an increasingly important role in the properties of two-dimensional (2D) materials. While defects are generally thought to negatively affect superconductivity in 2D materials, here we demonstrate the contrary in the case of oxygenation of ultrathin tantalum disulfide (TaS2). Our first-principles calculations show that incorporation of oxygen into the TaS2 crystal lattice is energetically favorable and effectively heals sulfur vacancies typically present in these crystals, thus restoring the electronic band structure and the carrier density to the intrinsic characteristics of TaS2. Strikingly, this leads to a strong enhancement of the electron-phonon coupling, by up to 80% in the highly oxygenated limit. Using transport measurements on fresh and aged (oxygenated) few-layer TaS2, we found a marked increase of the superconducting critical temperature (Tc) upon aging, in agreement with our theory, while concurrent electron microscopy and electron-energy loss spectroscopy confirmed the presence of sulfur vacancies in freshly prepared TaS2 and incorporation of oxygen into the crystal lattice with time. Our work thus reveals the mechanism by which certain atomic-scale defects can be beneficial to superconductivity and opens a new route to engineer Tc in ultrathin materials.
ABSTRACT
The structural, electronic, and magnetic properties of interfaces between epitaxial La0.7Sr0.3MnO3 and PbTiO3 have been explored via atomic resolution transmission electron microscopy of a functional multiferroic tunnel junction. Measurements of the polar displacements and octahedral tilting show the competition between the two distortions at the interface and demonstrate strong dependence on the polarization orientation. The density functional theory provides information on the electronic and magnetic properties, where the interface termination plays a crucial role in the screening mechanisms.
ABSTRACT
The droplet consumption step in self-catalyzed III-V semiconductor nanowires can produce material that contains a high density of line defects. Interestingly, these defects are often associated with twin boundaries and have null Burgers vector, i.e., no long-range strain field. Here, we analyze their stability by considering the forces that act on them and use in situ aberration corrected scanning transmission electron microscopy (STEM) to observe their behavior in GaAsP nanowires (NWs) using short annealing cycles. Their movement appears to be consistent with the thermally activated single- or double-kink mechanisms of dislocation glide, with velocities that do not exceed 1 nm s-1. We find that motion of individual defects depends on their size, position, and surrounding environment and set an upper limit to activation energy around 2 eV. The majority of defects (>70%) are removed by our postgrowth annealing for several seconds at temperatures in excess of 640 °C, suggesting that in situ annealing during growth at lower temperatures would significantly improve material quality. The remaining defects do not move at all and are thermodynamically stable in the nanowire.
ABSTRACT
Ferroelectric tunnel junction (FTJ) based memristors exhibiting continuous electric field controllable resistance states have been considered promising candidates for future high-density memories and advanced neuromorphic computational architectures. However, the use of rigid single crystal substrate and high temperature growth of the epitaxial FTJ thin films constitutes the main obstacles to using this kind of heterostructure in flexible computing devices. Here, we report the integration of centimeter-scale single crystalline FTJs on flexible plastic substrates, by water-etching based epitaxial oxide membrane lift-off and the following transfer. The resulting highly flexible FTJ membranes retain the single-crystalline structure along with stable and switchable ferroelectric polarization as the grown-on single crystal substrate state. We show that the obtained flexible memristors, i.e., FTJs on plastic substrates, present high speed and low voltage mediated memristive behaviors with resistance changes over 500% and are stable against shape change. This work is an essential step toward the realization of epitaxial ultrathin ferroelectric oxide film-based electronics on large-area, flexible, and affordable substrates.
ABSTRACT
It has been recently shown that the strain gradient is able to separate the light-excited electron-hole pairs in semiconductors, but how it affects the photoelectric properties of the photo-active materials remains an open question. Here, we demonstrate the critical role of the strain gradient in mediating local photoelectric properties in the strained BiFeO3 thin films by systematically characterizing the local conduction with nanometre lateral resolution in both dark and illuminated conditions. Due to the giant strain gradient manifested at the morphotropic phase boundaries, the associated flexo-photovoltaic effect induces on one side an enhanced photoconduction in the R-phase, and on the other side a negative photoconductivity in the morphotropic [Formula: see text]-phase. This work offers insight and implication of the strain gradient on the electronic properties in both optoelectronic and photovoltaic devices.
ABSTRACT
Highly B-site ordered Pb2 ScTaO6 crystals are studied as a function of temperature via dielectric spectroscopy and in situ high-dynamic-range electron diffraction. The degree of ordering is examined on the local and macroscopic scale and is determined to be 76%. Novel analysis of the electron diffraction patterns provides structural information with two types of antiferroelectric displacements determined to be present in the polar structure. It is then found that a low-temperature transition occurs on cooling at ≈210 K that is not present on heating. This phenomenon is discussed in terms of the freezing of dynamic polar nanodomains where a high density of domain walls creates a metastable state.
ABSTRACT
In electrodeposition the key challenge is to obtain better control over nanostructure morphology. Currently, a lack of understanding exists concerning the initial stages of nucleation and growth, which ultimately impact the physicochemical properties of the resulting entities. Using identical location scanning transmission electron microscopy (STEM), with boron-doped diamond (BDD) serving as both an electron-transparent TEM substrate and electrode, we follow this process, from the formation of an individual metal atom through to a crystalline metal nanoparticle, under potential pulsed conditions. In doing so, we reveal the importance of electrochemically driven atom transport, atom cluster formation, cluster progression to a nanoparticle, and the mechanism by which neighboring particles interact during growth. Such information will help formulate improved nucleation and growth models and promote wider uptake of electrodeposited structures in a wide range of societally important applications. This type of measurement is possible in the TEM because the BDD possesses inherent stability, has an extremely high thermal conductivity, is electron beam transparent, is free from contamination, and is robust enough for multiple deposition and imaging cycles. Moreover, the platform can be operated under conditions such that we have confidence that the dynamic atom events we image are truly due to electrochemically driven deposition and no other factors, such as electron-beam-induced movement.
ABSTRACT
We have investigated the structure of atomic defects within monolayer NbSe2 encapsulated in graphene by combining atomic resolution transmission electron microscope imaging, density functional theory (DFT) calculations, and strain mapping using geometric phase analysis. We demonstrate the presence of stable Nb and Se monovacancies in monolayer material and reveal that Se monovacancies are the most frequently observed defects, consistent with DFT calculations of their formation energy. We reveal that adventitious impurities of C, N, and O can substitute into the NbSe2 lattice stabilizing Se divacancies. We further observe evidence of Pt substitution into both Se and Nb vacancy sites. This knowledge of the character and relative frequency of different atomic defects provides the potential to better understand and control the unusual electronic and magnetic properties of this exciting two-dimensional material.
ABSTRACT
Formation of domain walls in ferroelectrics is not energetically favourable in low-dimensional systems. Instead, vortex-type structures are formed that are driven by depolarization fields occurring in such systems. Consequently, polarization vortices have only been experimentally found in systems in which these fields are deliberately maximized, that is, in films between insulating layers. As such configurations are devoid of screening charges provided by metal electrodes, commonly used in electronic devices, it is wise to investigate if curling polarization structures are innate to ferroelectricity or induced by the absence of electrodes. Here we show that in unpoled Co/PbTiO3/(La,Sr)MnO3 ferroelectric tunnel junctions, the polarization in active PbTiO3 layers 9 unit cells thick forms Kittel-like domains, while at 6 unit cells there is a complex flux-closure curling behaviour resembling an incommensurate phase. Reducing the thickness to 3 unit cells, there is an almost complete loss of switchable polarization associated with an internal gradient.
ABSTRACT
The geometric phase analysis (GPA) algorithm is known as a robust and straightforward technique that can be used to measure lattice strains in high resolution transmission electron microscope (TEM) images. It is also attractive for analysis of aberration-corrected scanning TEM (ac-STEM) images that resolve every atom column, since it uses Fourier transforms and does not require real-space peak detection and assignment to appropriate sublattices. Here it is demonstrated that, in ac-STEM images of compound materials with compositionally distinct atom columns, an additional geometric phase is present in the Fourier transform. If the structure changes from one area to another in the image (e.g. across an interface), the change in this additional phase will appear as a strain in conventional GPA, even if there is no lattice strain. Strategies to avoid this pitfall are outlined.