ABSTRACT
The effects of Sb3+ cations substitution on the structural, magnetic and electrical properties of Al1-xSbxFeO3 multiferroic perovskite are investigated. The partial or total substitution of Al3+ cations with Sb3+ cations, in stoichiometric composition Al1-xSbxFeO3 (x = 0.00, 0.25, 0.50, 0.75 and 1.00) were made in order to identify composite materials with sensors applicative properties. Multiferroic perovskite samples were prepared following technology of the ceramic solid-state method, and the thermal treatments were performed in air atmosphere at 1100 °C temperature. The X-ray diffraction studies have confirmed the phase composition of samples and scanning electron microscopy the shape of the crystallites has been evidenced. The perovskite material was subjected to representative magnetic investigations in order to highlight substitutions characteristics. Investigations on electrical properties have evidenced the substitution dependence of relative permittivity and electrical resistivity under humidity influence and the characteristics of humidity sensors based on this material. The results are discussed in term of microstructural changes induced by the substitutions degree and its sensor applicative effects.
ABSTRACT
The effects of annealing temperature on the structural, physical and humidity sensing properties of stoichiometric Mg0.5W0.5Fe2O4 spinel ferrite are investigated. In order to highlight the influence of sintering temperature on the structural, magnetic and electrical properties, ferrite samples were sintered for 2 h at 850 °C, 900 °C, 950 °C, 1000 °C and 1050 °C and the physical properties and humidity influence on magnesium-tungsten ferrite materials were analyzed. X-ray diffraction investigations confirmed the formation of magnesium-tungsten ferrite in the analyzed samples. SEM micrographs revealed the influence of annealing temperature on the microstructures of the samples and provided information related to their porosity and crystallite shape and size. This material, treated at different temperatures, is used as an active element in the construction of capacitive and resistive humidity sensors, whose characteristics were also investigated in order to determine the most suitable sintering temperature.
ABSTRACT
This paper presents the results of an investigation on the magnetic and dielectric properties of Mg0.5Zn0.5Fe2O4 spinel ferrite with a 1% weight percentage of Li+ and K+ added cations. The addition of metal ions plays an important role in increasing the porosity and favors the formation of ferrite at low temperatures. The goal of this new research is to demonstrate that by selecting the type of metallic cations for addition or choosing an optimal sintering temperature, it may be possible to improve the magnetic and electrical properties of Mg-Zn ferrite. The samples were prepared using sol-gel self-combustion techniques and annealed at 1000 °C, 1100 °C, and 1200 °C. Scanning electron microscopy revealed the shape and grain size of the samples, and the phase composition was analyzed using the X-ray diffraction technique. The magnetic information, such as remanent magnetization MR, saturation magnetization MS, and coercivity HC, were extracted from the hysteresis loops of the samples. The electrical investigation was focused on the low- and high-frequency dependence of dielectric constant and dielectric losses. The results are discussed in terms of microstructural changes induced by the additions of Li+ and K+ metallic cations. Conclusions are drawn concerning the optimization of magnetic and electrical properties for the development of Mg-Zn ferrite with possible applications in the field of magnetic materials or electronics.
ABSTRACT
Herein, we report the chemiresistive gas and humidity sensing properties of pristine and nickel-doped tin oxide (Ni-SnO2) gas sensors prepared by a microwave-assisted wet chemical method. The structural and optical properties are characterised using X-ray diffraction, scanning electron microscopy, scanning transmission electron microscopy, ultraviolet spectroscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The structural elucidation and morphology analyses confirm a particle size of 32-46 nm, tetragonal rutile crystal structure and small cauliflower-type surface appearance. Nickel doping can tune the structure of NPs and morphology. The tested carbon dioxide gas and humidity sensing properties reveal a rapid sensing performance with high-to-moderate sensitivity. Also, the materials favour gas sensing because their sensitivity is enhanced with the increase in nickel concentration. The sensing results suggest that nickel is a vibrant metal additive to increase the gas sensitivity of the sensor. However, nickel doping decreases the electron density and increases the oxygen vacancies. Ultimately, the gas sensor produces highly rapid sensing with a response time of 4 s.
ABSTRACT
In view of the difficulties in using the well-known Stoner-Wohlfarth (SW) ferromagnetic single-domain particle as a vector hysteresis unit in statistical models of hysteresis like the Preisach-type model or in micromagnetic models, we propose a new description of the single-domain ferromagnetic grains by using a vector hysteron (VH) as the 2D and 3D generalization of the rectangular hysteron. The vector hysteron introduced from magnetic symmetry considerations describes analytically the properties of a range of single-domain ferromagnetic particles and also provides the physical motivation for the linear form of the energy barrier used in several dynamic models. In this paper we show the main characteristics of the analytical vector hysteron by comparing it with the well-known Stoner-Wohlfarth model. We compare the hysteresis curves, switching fields and energetic properties of the uniaxial single-domain particles as provided by the two models.
