A Scalable Robust Microporous Al-MOF for Post-Combustion Carbon Capture.

Herein, a robust microporous aluminum tetracarboxylate framework, MIL-120(Al)-AP, (MIL, AP: Institute Lavoisier and Ambient Pressure synthesis, respectively) is reported, which exhibits high CO2 uptake (1.9 mmol g-1 at 0.1 bar, 298 K). In situ Synchrotron X-ray diffraction measurements together with Monte Carlo simulations reveal that this structure offers a favorable CO2 capture configuration with the pores being decorated with a high density of µ2-OH groups and accessible aromatic rings. Meanwhile, based on calculations and experimental evidence, moderate host-guest interactions Qst (CO2) value of MIL-120(Al)-AP (-40 kJ mol-1) is deduced, suggesting a relatively low energy penalty for full regeneration. Moreover, an environmentally friendly ambient pressure green route, relying on inexpensive raw materials, is developed to prepare MIL-120(Al)-AP at the kilogram scale with a high yield while the Metal- Organic Framework (MOF) is further shaped with inorganic binders as millimeter-sized mechanically stable beads. First evidences of its efficient CO2/N2 separation ability are validated by breakthrough experiments while operando IR experiments indicate a kinetically favorable CO2 adsorption over water. Finally, a techno-economic analysis gives an estimated production cost of ≈ 13 $ kg-1, significantly lower than for other benchmark MOFs. These advancements make MIL-120(Al)-AP an excellent candidate as an adsorbent for industrial-scale CO2 capture processes.

Emerging Nitric Oxide and Hydrogen Sulfide Releasing Carriers for Skin Wound Healing Therapy.

Nitric oxide (NO) and hydrogen sulfide (H2 S) have been recognized as important signalling molecules involved in multiple physiological functions, including wound healing. Their exogenous delivery has been established as a new route for therapies, being the topical application the nearest to commercialization. Nevertheless, the gaseous nature of these therapeutic agents and their toxicity at high levels imply additional challenges in the design of effective delivery systems, including the tailoring of their morphology and surface chemistry to get controllable release kinetics and suitable lifetimes. This review highlights the increasing interest in the use of these gases in wound healing applications by presenting the various potential strategies in which NO and/or H2 S are the main therapeutic agents, with focus on their conceptual design, release behaviour and therapeutic performance. These strategies comprise the application of several types of nanoparticles, polymers, porous materials, and composites as new releasing carriers of NO and H2 S, with characteristics that will facilitate the application of these molecules in the clinical practice.

Glutaraldehyde-crosslinking chitosan scaffolds reinforced with calcium phosphate spray-dried granules for bone tissue applications.

The clinical demand for bone scaffolds as an alternative strategy for bone grafting has increased exponentially and, up to date, numerous formulations have been proposed to regenerate the bone tissue. However, most of these structures lack at least one of the fundamental/ideal properties of these materials (e.g., mechanical resistance, interconnected porosity, bioactivity, biodegradability, etc.). In this work, we developed innovative composite scaffolds, based on crosslinked chitosan with glutaraldehyde (GA), combined with different atomized calcium phosphates (CaP) granules - hydroxyapatite (HA) or biphasic mixtures of HA and ß - tricalcium phosphate (ß-TCP), with improved biomechanical behavior and enhanced biological response. This innovative combination was designed to improve the scaffolds' functionality, in which GA improved chitosan mechanical strength and stability, whereas CaP granules enhanced the scaffolds' bioactivity and osteoblastic response, further reinforcing the scaffolds' structure. The biological assessment of the composite scaffolds showed that the specimens with 0.2% crosslinking were the ones with the best biological performance. In addition, the inclusion of biphasic granules induced a trend for increase osteogenic activation, as compared to the addition of HA granules. In conclusion, scaffolds produced in the present work, both with HA granules or the biphasic ones, and with low concentrations of GA, have shown adequate properties and enhanced biological performance, being potential candidates for application in bone tissue engineering.

Tuning Cellular Biological Functions Through the Controlled Release of NO from a Porous Ti-MOF.

Materials for the controlled release of nitric oxide (NO) are of interest for therapeutic applications. However, to date, many suffer from toxicity and stability issues, as well as poor performance. Herein, we propose a new NO adsorption/release mechanism through the formation of nitrites on the skeleton of a titanium-based metal-organic framework (MOF) that we named MIP-177, featuring a suitable set of properties for such an application: (i) high NO storage capacity (3 µmol mg-1solid ), (ii) excellent biocompatibility at therapeutic relevant concentrations (no cytotoxicity at 90 µg mL-1 for wound healing) due to its high stability in biological media (<9 % degradation in 72 hours) and (iii) slow NO release in biological media (≈2 hours for 90 % release). The prospective application of MIP-177 is demonstrated through NO-driven control of mitochondrial respiration in cells and stimulation of cell migration, paving the way for the design of new NO delivery systems for wound healing therapy.

New generation of nitric oxide-releasing porous materials: Assessment of their potential to regulate biological functions.

Nitric oxide (NO) presents innumerable biological roles, and its exogenous supplementation for therapeutic purposes has become a necessity. Some nanoporous materials proved to be potential vehicles for NO with high storage capacity. However, there is still a lack of information about their efficiency to release controlled NO and if they are biocompatible and biologically stable. In this work, we address this knowledge gap starting by evaluating the NO release and stability under biological conditions and their toxicity with primary keratinocyte cells. Titanosilicates (ETS-4 and ETS-10 types) and clay-based materials were the materials under study, which have shown in previous studies suitable NO gas adsorption/release rates. ETS-4 proved to be the most promising material, combining good biocompatibility at 180 µg/mL, stability and slower NO release. ETS-10 and ETAS-10 showed the best biocompatibility at the same concentration and, in the case of clay-based materials, CoOS is the least toxic of those tested and the one that releases the highest NO amount. The potentiality of these new NO donors to regulate biological functions was assessed next by controlling the mitochondrial respiration and the cell migration. NO-loaded ETS-4 regulates O2 consumption and cell migration in a dose-dependent manner. For cell migration, a biphasic effect was observed in a narrow range of ETS-4 concentration, with a stimulatory effect becoming inhibitory just by doubling ETS-4 concentration. For the other materials, no effective regulation was achieved, which highlights the relevance of the new assessment presented in this work for nanoporous NO carriers that will pave the way for further developments.

Easy-Assessment of Levofloxacin and Minocycline in Relevant Biomimetic Media by HPLC-UV Analysis.

Simple, economic and environmental friendly high-performance liquid chromatography methods for levofloxacin and minocycline quantification in biomimetic media were developed and validate including their stability at body temperature, an often neglected evaluation parameter. Both methods are similar only differing in the wavelength setting, i.e., for levofloxacin and minocycline quantification the UV detection was set at 284 and at 273 nm, respectively. The separation of both antibiotics was achieved using a reversed-phase column and a mobile phase consisting of acetonitrile and water (15:85) with 0.6% triethylamine, adjusted to pH 3. As an internal standard for levofloxacin quantification, minocycline was used and vice versa. The calibration curves for both methods were linear (r = 0.99) over a concentration range of 0.3-16 µg/mL and 0.5-16 µg/mL for levofloxacin and minocycline, respectively, with precision, accuracy and recovery in agreement with international guidelines requirement. Levofloxacin revealed stability in all media and conditions, including at 37°C, with exception to freeze-thaw cycle conditions. Minocycline presented a more accentuated degradation profile over prolonged time courses, when compared to levofloxacin. Reported data is of utmost interest for pharma and biomaterials fields regarding the research and development of new local drug-delivery-systems containing either of these two antibiotics, namely when monitoring the in vitro release studies of those systems.

A minocycline-releasing PMMA system as a space maintainer for staged bone reconstructions-in vitro antibacterial, cytocompatibility and anti-inflammatory characterization.

In the present work, we study the development and biological characterization of a polymethyl methacrylate (PMMA)-based minocycline delivery system, to be used as a space maintainer within craniofacial staged regenerative interventions. The developed delivery systems were characterized regarding solid state characteristics and assayed in vitro for antibacterial and anti-inflammatory activity, and cytocompatibility with human bone cells. A drug release profile allowed for an initial burst release and a more sustained and controlled release over time, with minimum inhibitory concentrations for the assayed and relevant pathogenic bacteria (i.e., Staphylococcus aureus, slime-producer Staphylococcus epidermidis and Escherichia coli) being easily attained in the early time points, and sustained up to 72 h. Furthermore, an improved osteoblastic cell response-with enhancement of cell adhesion and cell proliferation-and increased anti-inflammatory activity were verified in developed systems, compared to a control (non minocycline-loaded PMMA cement). The obtained results converge to support the possible efficacy of the developed PMMA-based minocycline delivery systems for the clinical management of complex craniofacial trauma. Here, biomaterials with space maintenance properties are necessary for the management of staged reconstructive approaches, thus minimizing the risk of peri-operative infections and enhancing the local tissue healing and early stages of regeneration.

Vitamin B3 metal-organic frameworks as potential delivery vehicles for therapeutic nitric oxide.

The synthesis and structural characterization of two isostructural metal (M=Ni, Co) 3D framework structure that integrate vitamin B3 building blocks with NO delivery capabilities and low toxicity is presented. The compounds with a formula [M2(µ2-H2O)(µ-vitamin B3)4]·2H2O contain two crystallographic distinct divalent metal centres connected by a bridging water and carboxylate group from vitamin B3. The porous compounds have the capability of storing and releasing nitric oxide (NO) in a slow and reversible manner, with released amounts of 2.6 and 2.0µmol NOmgsolid-1, on the Ni and Co compound, respectively. The NO release followed a convenient slow release kinetic profile in both gas and liquid phases. Haemoglobin tests demonstrated that NO is released to the medium in a biologically active form, thus suitable to trigger the desired response in biological systems. The toxicity of the samples with and without loaded NO was evaluated from cytotoxicity tests in HeLa and HEKn cells, showing low toxicity of the compounds at concentrations below 180µgcm-3. The overall results indicate that these bio based MOFs are of interest for therapeutic applications related with NO delivery. STATEMENT OF SIGNIFICANCE.

Novel doped calcium phosphate-PMMA bone cement composites as levofloxacin delivery systems.

Antibiotic-loaded acrylic bone cements (ALABCs) are well-established and cost-effective materials to control the occurrence of bone and joint infections. However, the inexistence of alternative antibiotics other than those already commercially available and the poor ability to bind to bone tissue hampering its biological function are still major drawbacks of ALABCs clinical application. The concept of this research work is to develop a novel bone cement (BC) drug delivery system composed by Mg- and Sr-doped calcium phosphate (CaP) particles as drug carriers loaded into a lactose-modified acrylic BC, which, to the best of our knowledge, has never been reported. CaP particles are known to promote bone ingrowth and current research is focused on using these carriers as antibiotic delivery systems for the treatment of bone infections, like osteomyelitis. Levofloxacin is a fluoroquinolone with anti-staphylococcal activity and adequate penetration into osteoarticular tissues and increasingly being recommended to manage bone-related infections. Also, the lactose-modified BC matrix, with a more porous structure, has already proved to enhance antibiotic release from the BC inner matrix. This novel BC composite biomaterial has shown improved mechanical integrity, biocompatibility maintenance, and sustained release of levofloxacin, with concentrations over the minimum inhibitory concentration values after a 48h while maintaining antibacterial activity over an 8-week period against Staphyloccocus aureus and Staphyloccocus epidermidis, common pathogens associated with bone infections.