Hybrid Fabrication of Prestrain-Locked Acrylic Dielectric Elastomer Thin Films and Multilayer Stacks.

Dielectric elastomers based on commercial acrylic dielectric elastomers (VHB adhesive films) are widely investigated for soft actuators due to their large electrically driven actuation strain and high work density. However, the VHB films require prestretching to overcome electromechanical instability, which adds fabrication complexity. In addition, their high viscoelasticity leads to a low response speed. Interpenetrated polymer networks (IPNs) are developed to lock the prestrain in VHB films, resulting in free-standing films that are capable of large-strain actuation. In this work, a prestrain-locked high-performance dielectric elastomer thin film (VHB-IPN-P) by introducing 1,6-hexanediol diacrylate to create an IPN in the VHB network and a plasticizer to enhance the actuation speed is reported. VHB-IPN-P based actuators exhibit stable actuation at 60% strain up to 10 Hz and reach a peak energy density of 102 J kg⁻1 . In addition, a hybrid process is also developed for the fabrication of multilayer stacks of VHB-IPN-P with strong inter-layer bonding and structural integrity. Four-layer stacks fabricated preserve the strain and energy density of single-layer VHB-IPN-P films but with linearly scaled force and work output.

A processable, high-performance dielectric elastomer and multilayering process.

Dielectric elastomers (DEs) can act as deformable capacitors that generate mechanical work in response to an electric field. DEs are often based on commercial acrylic and silicone elastomers. Acrylics require prestretching to achieve high actuation strains and lack processing flexibility. Silicones allow for processability and rapid response but produce much lower strains. In this work, a processable, high-performance dielectric elastomer (PHDE) with a bimodal network structure is synthesized, and its electromechanical properties are tailored by adjusting cross-linkers and hydrogen bonding within the elastomer network. The PHDE exhibits a maximum areal strain of 190% and maintains strains higher than 110% at 2 hertz without prestretching. A dry stacking process with high efficiency, scalability, and yield enables multilayer actuators that maintain the high actuation performance of single-layer films.

A unimorph nanocomposite dielectric elastomer for large out-of-plane actuation.

Dielectric elastomer actuators (DEAs) feature large, reversible in-plane deformation, and stacked DEA layers are used to produce large strokes in the thickness dimension. We introduce an electrophoretic process to concentrate boron nitride nanosheet dispersion in a dielectric elastomer precursor solution onto a designated electrode surface. The resulting unimorph nanocomposite dielectric elastomer (UNDE) has a seamless bilayer structure with 13 times of modulus difference. The UNDE can be actuated to large bending curvatures, with enhanced breakdown field strength and durability as compared to conventional nanocomposite dielectric elastomer. Multiple UNDE units can be formed in a simple electrophoretic concentration process using patterned electrode areas. A disc-shaped actuator comprising six UNDE units outputs large bidirectional stroke up to 10 Hz. This actuator is used to demonstrate a high-speed lens motor capable of varying the focal length of a two-lens system by 40 times.

Ultrathin Polypyrrole Layers Boosting MoO3 as Both Cathode and Anode Materials for a 2.0 V High-Voltage Aqueous Supercapacitor.

An aqueous supercapacitor is an emerging energy storage unit on account of its low cost, fast energy delivery rate, and long service life. The energy density of an aqueous supercapacitor can be enlarged via extending the voltage window of electrode materials, while the aqueous electrolyte remains thermodynamically constant at 1.23 V. Herein, an aqueous supercapacitor with a 2.0 V high-voltage window is realized by core-shell MoO3-x/polypyrrole (MP) nanocomposites as both cathode and anode materials. The ultrathin PPy layer on the MoO3 core not only improves the conductivity and cycle stability of the nanocomposites but also acts as a reductant, leading to the formation of oxygen vacancies in the MoO3 core. When used as a cathode material, the potential range of the as-obtained MP nanocomposite is up to 1.0 V. As an anode material, the stable potential range could reach -1.0 V. Due to the large potential range of the cathode and anode, the as-obtained 2.0 V aqueous supercapacitor shows a remarkably high delivery energy of 58.5 Wh kg-1. The synthesis of MP nanocomposites is simple and the electrode performance is significantly enhanced; thus, it is a suitable candidate for high-energy-density aqueous supercapacitors.

Dielectric Elastomer Artificial Muscle: Materials Innovations and Device Explorations.

Creating an artificial muscle has been one of the grand challenges of science and engineering. The invention of such a flexible, versatile, and power efficient actuator opens the gate for a new generation of lightweight, highly efficient, and multifunctional robotics. Many current artificial muscle technologies enable low-power mobile actuators, robots that mimic efficient and natural forms of motion, autonomous robots and sensors, and lightweight wearable technologies. They also have serious applications in biomedical devices, where biocompatibility, from a chemical, flexibility, and force perspective, is crucial. It remains unknown which material will ultimately form the ideal artificial muscle. Anything from shape memory alloys (SMAs) to pneumatics to electroactive polymers (EAPs) realize core aspects of the artificial muscle goal. Among them, EAPs most resemble their biological counterparts, and they encompass both ion-infusion and electric field based actuation mechanisms. Some of the most investigated EAPs are dielectric elastomers (DEs), whose large strains, fracture toughness, and power-to-weight ratios compare favorably with natural muscle. Although dielectric elastomer actuators (DEAs) only entered the artificial muscle conversation in the last 20 years, significant technological progress has reflected their high potential. Research has focused on solving the core issues surrounding DEAs, which includes improving their operational ranges with regard to temperature and voltage, adding new functionality to the materials, and improving the reliability of the components on which they depend. Mechanisms designed to utilize their large-strain actuation and low stiffness has also attracted attention. This Account covers important research by our group and others in various avenues such as decreasing viscoelastic losses in typical DE materials, increasing their dielectric constant, and countering electromechanical instability. We also discuss variable stiffness polymers, specifically bistable electroactive polymers, which, notably, open DEAs to structural applications typically unattainable for soft-actuator technologies. Furthermore, we explore advancements related to highly compliant and transparent electrodes, a crucial component of DEAs capable of achieving high actuation strain. We then cover noteworthy applications, including several novel devices for soft robotics and microfluidics, and how those applications fit within other major developments in the field. Finally, we conclude with a discussion of the remaining challenges facing current DEA technology and speculate on research directions that may further advance DE-based artificial muscles as a whole. This Account serves as a stepping stone into the field of EAPs, which, through the work of researchers worldwide, are positioned as a potential challenger to conventional actuator technologies.