ABSTRACT
Background: Fetal growth restriction (FGR) is a pregnancy complication in which a newborn fails to achieve its growth potential, increasing the risk of perinatal morbidity and mortality. Chronic maternal gestational hypoxia, as well as placental insufficiency are associated with increased FGR incidence; however, the molecular mechanisms underlying FGR remain unknown. Methods: Pregnant mice were subjected to acute or chronic hypoxia (12.5% O2) resulting in reduced fetal weight. Placenta oxygen transport was assessed by blood oxygenation level dependent (BOLD) contrast magnetic resonance imaging (MRI). The placentae were analyzed via immunohistochemistry and in situ hybridization. Human placentae were selected from FGR and matched controls and analyzed by immunohistochemistry (IHC). Maternal and cord sera were analyzed by mass spectrometry. Results: We show that murine acute and chronic gestational hypoxia recapitulates FGR phenotype and affects placental structure and morphology. Gestational hypoxia decreased labyrinth area, increased the incidence of red blood cells (RBCs) in the labyrinth while expanding the placental spiral arteries (SpA) diameter. Hypoxic placentae exhibited higher hemoglobin-oxygen affinity compared to the control. Placental abundance of Bisphosphoglycerate mutase (BPGM) was upregulated in the syncytiotrophoblast and spiral artery trophoblast cells (SpA TGCs) in the murine gestational hypoxia groups compared to the control. Hif1α levels were higher in the acute hypoxia group compared to the control. In contrast, human FGR placentae exhibited reduced BPGM levels in the syncytiotrophoblast layer compared to placentae from healthy uncomplicated pregnancies. Levels of 2,3 BPG, the product of BPGM, were lower in cord serum of human FGR placentae compared to control. Polar expression of BPGM was found in both human and mouse placentae syncytiotrophoblast, with higher expression facing the maternal circulation. Moreover, in the murine SpA TGCs expression of BPGM was concentrated exclusively in the apical cell side, in direct proximity to the maternal circulation. Conclusions: This study suggests a possible involvement of placental BPGM in maternal-fetal oxygen transfer, and in the pathophysiology of FGR. Funding: This work was supported by the Weizmann Krenter Foundation and the Weizmann - Ichilov (Tel Aviv Sourasky Medical Center) Collaborative Grant in Biomedical Research, by the Minerva Foundation, by the ISF KillCorona grant 3777/19.
Subject(s)
Fetal Growth Retardation , Placenta , Humans , Pregnancy , Female , Mice , Animals , Placenta/metabolism , Fetal Growth Retardation/genetics , Fetal Growth Retardation/metabolism , Bisphosphoglycerate Mutase/genetics , Bisphosphoglycerate Mutase/metabolism , Trophoblasts/metabolism , Hypoxia/metabolism , Oxygen/metabolismABSTRACT
INTRODUCTION: Regulatory agencies supported vaccination of pregnant women with SARS-CoV-2 mRNA vaccines, including patients with IBD. No data exist regarding these vaccines in IBD during pregnancy. AIM: To assess the serologic response to two doses of the mRNA SARS-CoV-2 BNT162b2 vaccine in pregnant women with IBD vaccinated during pregnancy, compared to that of pregnant women without IBD, and non-pregnant women with IBD. METHODS: Anti-spike antibody levels were assessed in all women and in cord blood of consenting women. RESULTS: From December 2020 to December 2021, 139 women were assessed: pregnant with IBD-36, pregnant without IBD-61, and not pregnant with IBD-42. Antibodies were assessed in cords of two and nine newborns of women with and without IBD, respectively. Mean gestational ages at administration of the second vaccine doses were 22.0 weeks in IBD and 23.2 weeks in non-IBD, respectively. Mean (SD) duration from the second vaccine dose to serology analysis in pregnant women with IBD, without IBD, and in non-pregnant women with IBD was 10.6 (4.9), 16.4 (6.3), and 4.3 (1.0) weeks, respectively. All women mounted a serologic response. In multivariable analysis, no correlation was found between the specific group and antibody levels. In both pregnancy groups, an inverse correlation between antibody levels and the interval from the second vaccine dose was demonstrated. Cord blood antibody levels exceeded maternal levels in women with and without IBD. CONCLUSION: All patients with IBD mounted a serologic response. The interval between vaccine administration to serology assessment was the most important factor determining antibody levels. A third vaccine dose should be considered in pregnant women with IBD vaccinated at early stages of pregnancy.
ABSTRACT
INTRODUCTION: This study proposes a computational fluid dynamics model of a human placenta's independent exchange unit (placentome) to assess the effect that the inner villi distribution and decidual veins (DVs) location and number, have on the oxygen uptake. METHODS: The internal placentome porosity distribution was altered in symmetric morphology, while asymmetry was introduced by varying the location and number of DVs. The DV asymmetry was introduced by either displacing them circumferentially, thereby changing the angle between them, or by adding DVs in the inlet cross-section. The results were analyzed by the changes in the normalized oxygen mass fraction and the oxygen uptake. RESULTS: Oxygenated blood was shown to be delivered deeper into the placentome when the area of non-homogeneous porosity was larger. The largest oxygen uptake was achieved in the asymmetric model with the smallest angle distance between the DVs, where a 10% decrease relative to the farthest case was obtained. Placing DVs adjacent to the spiral artery opening enhanced the drainage of oxygenated blood. DISCUSSION: This study demonstrates the importance of the local porosity distribution for the proper perfusion of the intervillous space and proposes a novel approach to improve our understanding of the role of the DVs in placental oxygen uptake.
Subject(s)
Chorion , Placenta , Humans , Pregnancy , Female , Placenta/blood supply , Porosity , Oxygen , PerfusionABSTRACT
BACKGROUNDThe significant risks posed to mothers and fetuses by COVID-19 in pregnancy have sparked a worldwide debate surrounding the pros and cons of antenatal SARS-CoV-2 inoculation, as we lack sufficient evidence regarding vaccine effectiveness in pregnant women and their offspring. We aimed to provide substantial evidence for the effect of the BNT162b2 mRNA vaccine versus native infection on maternal humoral, as well as transplacentally acquired fetal immune response, potentially providing newborn protection.METHODSA multicenter study where parturients presenting for delivery were recruited at 8 medical centers across Israel and assigned to 3 study groups: vaccinated (n = 86); PCR-confirmed SARS-CoV-2 infected during pregnancy (n = 65), and unvaccinated noninfected controls (n = 62). Maternal and fetal blood samples were collected from parturients prior to delivery and from the umbilical cord following delivery, respectively. Sera IgG and IgM titers were measured using the Milliplex MAP SARS-CoV-2 Antigen Panel (for S1, S2, RBD, and N).RESULTSThe BNT162b2 mRNA vaccine elicits strong maternal humoral IgG response (anti-S and RBD) that crosses the placenta barrier and approaches maternal titers in the fetus within 15 days following the first dose. Maternal to neonatal anti-COVID-19 antibodies ratio did not differ when comparing sensitization (vaccine vs. infection). IgG transfer ratio at birth was significantly lower for third-trimester as compared with second trimester infection. Lastly, fetal IgM response was detected in 5 neonates, all in the infected group.CONCLUSIONAntenatal BNT162b2 mRNA vaccination induces a robust maternal humoral response that effectively transfers to the fetus, supporting the role of vaccination during pregnancy.FUNDINGIsrael Science Foundation and the Weizmann Institute Fondazione Henry Krenter.
Subject(s)
Antibodies, Viral/blood , COVID-19 Vaccines/immunology , COVID-19 Vaccines/pharmacology , COVID-19/immunology , COVID-19/prevention & control , Maternal-Fetal Exchange/immunology , SARS-CoV-2/immunology , Adult , BNT162 Vaccine , Cohort Studies , Female , Fetal Blood/immunology , Humans , Immunization, Passive , Immunoglobulin G/blood , Infant, Newborn , Male , Pregnancy , Young AdultABSTRACT
OBJECTIVE: Mitral valve regurgitation (MR) is a common valvular heart disease where improper closing causes leakage. Currently, no transcatheter mitral valve device is commercially available. Raanani (co-author) and colleagues have previously proposed a unique rotational implantation, ensuring anchoring by metallic arms that pull the chordae tendineae. This technique is now being implemented in a novel device design. The aim of this study is to quantify the rotational implantation effect on the mitral annulus kinematics and on the stresses in the chordae and papillary muscles. METHODS: Finite element analysis of the rotational step of the implantation in a whole heart model is employed to compare 5 arm designs with varying diameters (25.9 mm to 32.4 mm) and rotation angles (up to 140°). The arm rotation that grabs the chordae was modeled when the valve was in systolic configuration. RESULTS: An increase in the rotation angle results in reduced mitral annulus perimeters. Larger rotation angles led to higher chordae stresses with the 29.8 mm experiencing the maximum stresses. The calculated chordae stresses suggest that arm diameter should be <27.8 mm and the rotation angle <120°. CONCLUSIONS: The upper limit of this diameter range is preferred in order to reduce the stresses in the papillary muscles while grabbing more chords. The findings of this study can help improving the design and performance of this unique device and procedural technique.
Subject(s)
Mitral Valve Insufficiency , Mitral Valve , Biomechanical Phenomena , Chordae Tendineae/surgery , Humans , Mitral Valve/surgery , Mitral Valve Insufficiency/surgery , Papillary MusclesABSTRACT
Subclinical leaflet thrombosis is becoming a major concern in valve-in-valve procedures, whereby a transcatheter aortic valve device is deployed inside a failed bioprosthetic surgical valve. Blood flow stagnation and prolonged residence times in the neo-sinuses have been suggested as possible explanations for leaflet thrombosis. The BASILICA technique, which was originally developed to treat coronary flow obstruction, has also been proposed as an alternative to reduce the risk of thrombus formation. The aim of this study is to understand the impact of BASILICA on the valve-in-valve thrombogenicity using computational fluid dynamics simulations. To this end, two Eulerian and two Lagrangian approaches were employed to estimate near-wall stagnation measures in eight valve-in-valve models. The models included an intact or lacerated Sorin Mitroflow surgical valve, and either a SAPIEN or Evolut transcatheter aortic valve device. The Lagrangian approaches predicted a high number of particles and vortices concentration in the proximal areas of the neo-sinuses, while the Eulerian approaches did so in the distal areas. As a consequence, this study demonstrated that Lagrangian approaches are better predictors of subclinical leaflet thrombosis, since they match experimental and clinical findings. Additionally, the SAPIEN valve possess a higher risk for developing leaflet thrombosis, and two lacerations are shown to provide the best results in terms of development of vortices and accumulation of particles within the neo-sinuses. This study highlights the potential of computational modeling in aiding clinicians in their decision-making in valve-in-valve and BASILICA procedures.
Subject(s)
Aortic Valve Stenosis , Bioprosthesis , Heart Valve Prosthesis , Thrombosis , Transcatheter Aortic Valve Replacement , Aortic Valve/surgery , Aortic Valve Stenosis/surgery , Heart Valve Prosthesis/adverse effects , Humans , Prosthesis Design , Thrombosis/etiology , Transcatheter Aortic Valve Replacement/adverse effects , Treatment OutcomeABSTRACT
Coronary artery obstruction (CAO), a fatal complication of transcatheter aortic valve replacement (TAVR), is commonly found after Valve-in-Valve implantation inside a degenerated bioprosthetic valve. Leaflet laceration (BASILICA technique) has been proposed to prevent CAO and to potentially reduce the risk of leaflet thrombosis. We have previously demonstrated that this technique can reduce the anchorage forces of the TAVR device, which may lead to future complications. In this short communication, we hypothesize that the anchorage force reduction can be minimized by implanting a TAVR with a larger diameter, if two sizes are clinically recommended. We evaluated this hypothesis by employing finite element models of the deployments of the Evolut 26 and 29 mm inside a 27 mm Mitroflow valve, with and without leaflet lacerations. The results show that a laceration substantially decreases the contact area between the Evolut stent and the Mitroflow valve. The larger Evolut has a larger contact area and stronger anchorage forces. Additionally, the anchorage forces are less sensitive to additional lacerations in the larger Evolut (29 case). The results suggest that a larger self-expending device can ensure stronger anchorage and can lower the risk of possible migration, when TAVR is performed in a lacerated bioprosthesis.
Subject(s)
Aortic Valve Stenosis , Bioprosthesis , Coronary Stenosis , Heart Valve Prosthesis , Transcatheter Aortic Valve Replacement , Aortic Valve/surgery , Aortic Valve Stenosis/surgery , Heart Valve Prosthesis/adverse effects , Humans , Prosthesis Design , Transcatheter Aortic Valve Replacement/adverse effects , Treatment OutcomeABSTRACT
Leaflet thrombosis has been suggested as the reason for the reduced leaflet motion in cases of hypoattenuated leaflet thickening of bioprosthetic aortic valves. This work aimed to estimate the risk of leaflet thrombosis in two post-valve-in-valve (ViV) configurations, using five different numerical approaches. Realistic ViV configurations were calculated by modelling the deployments of the latest version of transcatheter aortic valve devices (Medtronic Evolut PRO, Edwards SAPIEN 3) in the surgical Sorin Mitroflow. Computational fluid dynamics simulations of blood flow followed the dry models. Lagrangian and Eulerian measures of near-wall stagnation were implemented by particle and concentration tracking, respectively, to estimate the thrombogenicity and to predict the risk locations. Most of the numerical approaches indicate a higher leaflet thrombosis risk in the Edwards SAPIEN 3 device because of its intra-annular implantation. The Eulerian approaches estimated high-risk locations in agreement with the wall sheer stress (WSS) separation points. On the other hand, the Lagrangian approaches predicted high-risk locations at the proximal regions of the leaflets matching the low WSS magnitude regions of both transcatheter aortic valve implantation models and reported clinical and experimental data. The proposed methods can help optimizing future designs of transcatheter aortic valves with minimal thrombotic risks.
ABSTRACT
Transcatheter aortic valve implantation (TAVI) is currently recommended in practice guidelines for patients who are at intermediate to high surgical risk for surgical aortic valve replacement. Coronary artery obstruction is a fatal complication of TAVI that occurs in up to 3.5% of the implantations inside a failed surgical bioprosthetic valve (valve-in-valve, ViV). A new technique to address this problem is intentional laceration of the bioprosthetic leaflets, known as BASILICA. In this technique, the leaflets are lacerated to prevent coronary obstruction and may also help in preventing leaflet thrombosis. Our hypothesis is that this technique may harm the circumferential stress in the surgical valve and weaken the anchorage of the TAVI device. This study aims to compare the anchorage post-ViV implantations, with and without lacerations, using numerical modelling. Deployments of TAVI stents (Medtronic Evolut PRO; Edwards SAPIEN 3) inside an externally mounted surgical bioprosthetic valve (Sorin Mitroflow) were modelled by finite element analysis. The results show that each laceration reduces the contact area of the TAVI stent with its landing zone and that the anchorage contact force weakens. The BASILICA technique has lesser effect on the anchorage contact area and forces in the SAPIEN than in the Evolut cases, because the balloon inflation is less sensitive to the deployment region. TAVI stent migration was not found in any of the models. These results can help expanding the use of leaflet laceration by choosing a better matched TAVI devices for the BASILICA technique.
Subject(s)
Lacerations/pathology , Models, Cardiovascular , Stents , Transcatheter Aortic Valve Replacement , Biomechanical Phenomena , Humans , Stress, MechanicalABSTRACT
Transport of nutrients and waste between the maternal and fetal circulations during pregnancy takes place at the final branches of the placental villous trees. Therefore, and unsurprisingly, pregnancy complications have been related to the maldevelopment of terminal villi. However, a deep analysis of placental villous morphology has been limited by tissue processing and imaging techniques. In this proof-of-principle study, placental lobules were fixed by perfusion and small clumps of villi were stained, sectioned optically and reconstructed. Morphological and network analyses were suggested and demonstrated on samples of normal placentas. The results show that most parameters are almost constant within a placenta but that there exists an inter-individual variation. Network analysis suggests that the feto-placental capillary network has several paths within an individual villus, serving as an efficient transport system. Three-dimensional reconstruction from confocal laser scanning microscopy images is a potent technique able to quantify placental architecture and capture the significant irregularities in vessel diameter and membrane thickness. This approach has the potential to become a powerful tool to further our understanding of the differences in placental structure which may underlie pregnancy complications.
ABSTRACT
INTRODUCTION: Placental transport is the main factor affecting the health and development of the fetus. Due to the placenta's geometrical and mathematical complexity, the structure-function relations of placental terminal villi have not been successfully modeled. Hence, a novel modeling approach is proposed. METHODS: Computational models of four different specimens were generated from the three-dimensional reconstruction of confocal laser scanning microscopic image stacks. To evaluate the capabilities of the proposed methodology, stationary oxygen diffusion transport was calculated in the terminal villus volumes. RESULTS: The reconstructions automatically provided the spatial arrangement of the fetal capillaries inside the terminal villi. The surface and volume ratios between the fetal capillaries and the villus were also calculated, and the effects of model parameters on the placental diffusive capacity were assessed by parametric analysis. DISCUSSION: The potential of three-dimensional reconstructions combined with finite element analysis as a research tool for the human placenta was tested. The methodology herein could serve in the future as a simulation platform for complicated in vivo and in vitro scenarios.
Subject(s)
Chorionic Villi/anatomy & histology , Models, Anatomic , Placenta/anatomy & histology , Chorionic Villi/blood supply , Female , Humans , Image Processing, Computer-Assisted , Imaging, Three-Dimensional , Microscopy, Confocal , Placenta/blood supply , PregnancyABSTRACT
BACKGROUND: Predicting patient specific risk of fracture in femurs with metastatic tumors and the need for surgical intervention are of major clinical importance. Recent patient-specific high-order finite element methods (p-FEMs) based on CT-scans demonstrated accurate results for healthy femurs, so that their application to metastatic affected femurs is considered herein. METHODS: Radiographs of fresh frozen proximal femur specimens from donors that died of cancer were examined, and seven pairs with metastatic tumor were identified. These were CT-scanned, instrumented by strain-gauges and loaded in stance position at three inclination angles. Finally the femurs were loaded until fracture that usually occurred at the neck. Histopathology was performed to determine whether metastatic tumors are present at fractured surfaces. Following each experiment p-FE models were created based on the CT-scans mimicking the mechanical experiments. The predicted displacements, strains and yield loads were compared to experimental observations. RESULTS: The predicted strains and displacements showed an excellent agreement with the experimental observations with a linear regression slope of 0.95 and a coefficient of regression R(2)=0.967. A good correlation was obtained between the predicted yield load and the experimental observed yield, with a linear regression slope of 0.80 and a coefficient of regression R(2)=0.78. DISCUSSION: CT-based patient-specific p-FE models of femurs with real metastatic tumors were demonstrated to predict the mechanical response very well. A simplified yield criterion based on the computation of principal strains was also demonstrated to predict the yield force in most of the cases, especially for femurs that failed at small loads. In view of the limited capabilities to predict risk of fracture in femurs with metastatic tumors used nowadays, the p-FE methodology validated herein may be very valuable in making clinical decisions.