Grain-by-Grain Compositional Variations and Interstitial Metals-A New Route toward Achieving High Performance in Half-Heusler Thermoelectrics.

Half-Heusler alloys based on TiNiSn are promising thermoelectric materials characterized by large power factors and good mechanical and thermal stabilities, but they are limited by large thermal conductivities. A variety of strategies have been used to disrupt their thermal transport, including alloying with heavy, generally expensive, elements and nanostructuring, enabling figures of merit, ZT ≥ 1 at elevated temperatures (>773 K). Here, we demonstrate an alternative strategy that is based around the partial segregation of excess Cu leading to grain-by-grain compositional variations, the formation of extruded Cu "wetting layers" between grains, and-most importantly-the presence of statistically distributed interstitials that reduce the thermal conductivity effectively through point-defect scattering. Our best TiNiCuySn (y ≤ 0.1) compositions have a temperature-averaged ZTdevice = 0.3-0.4 and estimated leg power outputs of 6-7 W cm-2 in the 323-773 K temperature range. This is a significant development as these materials were prepared using a straightforward processing method, do not contain any toxic, expensive, or scarce elements, and are therefore promising candidates for large-scale production.

Spin state diagrams of 3dn Cations in tetragonally distorted octahedral sites.

The possible existence of an intermediate spin state is now a few decades fascinating solid state chemists and physicists, experimentalists, and theoreticians. In this article, we revise some recent results on the stability diagrams of spin states, low, high, or intermediate, in distorted environments and extend their approach to redraw more realistic diagrams for d(4), d(5), and d(6) ions in a tetragonally distorted 6-fold oxygen environment (D4h, D2d, and C4ν). The model relies on a point charge model and further uses effective parameters to account for the cubic field drift on spin state change and for suitable values for solid state of the expectation values of the 3d-radial wave functions; additionally the model uses rational parameters to characterize the distortion; finally, we also consider the possible existence of states' combinations to propose reliable stability diagrams. Whatever the representation involved in the distortion, the existence domain of the intermediate spin state appears very small and more likely replaced with mixtures of cations in low and high spin states; the opportunity of induced distortive ordering is discussed.

Rapid hydrothermal synthesis of VO2 (B) and its conversion to thermochromic VO2 (M1).

The present study provides a rapid way to obtain VO2 (B) under economical and environmentally friendly conditions. VO2 (B) is one of the well-known polymorphs of vanadium dioxide and is a promising cathode material for aqueous lithium ion batteries. VO2 (B) was successfully synthesized by rapid single-step hydrothermal process using V2O5 and citric acid as precursors. The present study shows that phase-pure VO2 (B) polytype can be easily obtained at 180 °C for 2 h and 220 °C for 1 h, that is, the lowest combination of temperature and duration reported so far. The obtained VO2 (B) is characterized by X-ray powder diffraction, high-resolution scanning electron microscopy, and Fourier transform infrared spectroscopy. In addition, we present an indirect way to obtain VO2 (M1) by annealing VO2 (B) under vacuum for 1 h.

Structure and properties of alkali cobalt double oxides A(0.6)CoO(2) (A = Li, Na, and K).

Lamellar A(x)CoO(2) cobalt double oxides with A = Li, Na, and K (x approximately 0.6) have been synthesized and their chemical (alkali content, oxidation state, and structure) and physical (resistivity, thermopower, magnetization, and specific heat) properties have been studied. All the three materials exhibit strong electron correlation emphasized by their behavior ranging from Fermi liquid to spin-polarized system. Our results show that both the dimensionality of the interactions and the nature of the alkali play a determining role on the properties.

Sodium ion mobility in Na(x)CoO2 (0.6 < x < 0.75) cobaltites studied by 23Na MAS NMR.

Various P2 and P'3-Na(x)CoO(2) phases, with x ranging approximately from 0.6 to 0.75, have been studied by variable-temperature (23)Na magic angle spinning (MAS) NMR. Signal modification versus temperature plots clearly show that Na(+) ions are not totally mobile at room temperature on the NMR time scale. As the temperature increases, the line shape change of the (23)Na MAS NMR signal differs for the P2 and P'3 stackings and is interpreted by the differences of Na(+) ion sites and of sodium diffusion pathways in the two structures.

First experimental evidence of potassium ordering in layered k4co7o14.

The layered P2-K4Co7O14 oxide has been prepared and characterized by means of X-ray diffraction, electrical conductivity, thermopower, and magnetic measurements. The crystal structure of K4Co7O14 (P6(3)/m space group, Z=2, a=7.5171(1) A, and c=12.371(1) A) consists of a stacking of slabs of edge-shared CoO6 octahedra with K+ ions occupying ordered positions in the interslab space, leading to a a0 radical7xa0 radical7 supercell. Potential energy calculations at 0 K are in good agreement with the ordered distribution of potassium ions in the (ab) plane. This oxide is metallic, and the magnetic susceptibility is of Pauli-type, which contrasts with the Curie-Weiss behavior of the homologous NaxCoO2 (x approximately 0.6) oxide with close alkali content. The thermopower at room temperature is about one-third that of polycrystalline Na0.6CoO2.