In vivo measurement of strain in the periodontal space of pig (Sus scrofa) incisors using in-fiber Bragg sensors.

The incisor teeth in pigs, Sus scrofa, function in association with a disc-shaped snout to explore the environment for potential food. Understanding how mechanical loading applied to the tooth deforms the periodontal ligament (PDL) is important to determining the role of periodontal mechanoreceptors during food exploration and feeding. The objective of this study was to use fiber Bragg (FBG) sensors to measure strain in vivo within the PDL space of pig incisors. The central mandibular incisors of pigs underwent spring loaded lingual tipping during FBG strain recording within the labial periodontal space. FBG sensors were placed within the periodontal space of the central mandibular incisors of ~2-3-month-old farm pigs. The magnitude and orientation of spring loads are expected to mimic incisor contact with food. During incisor tipping with load calibrated springs, FBG strains in vitro (N = 6) and in vivo (N = 6) recorded at comparable load levels overlapped in range (-10-20 µÎµ). Linear regressions between peak FBG strains, that is, the highest recorded strain value, and baseline strains, that is, strain without applied spring load, were significant across all in vivo experiments (peak strain at 200 g vs. baseline, p = .04; peak strain at 2000 g vs. baseline p = .03; peak strain at 2000 g vs. 200 g, p = .004). These linear relationships indicate that on a per experiment basis, the maximum measured strain at different spring loads showed predictable differences. A Friedman test of the absolute value of peak strain confirmed the significant increase in strain between baseline, 200 g, and 2000 g spring activation (p = .02). Mainly compressive strains were recorded in the labial PDL space and increases in spring load applied in vivo generated increases in FBG strain measurements. These results demonstrate the capacity for FBG sensors to be used in vivo to assess transmission of occlusal loads through the periodontium. PDL strain is associated with mechanoreceptor stimulation and is expected to affect the functional morphology of the incisors. The overall low levels of strain observed may correspond with the robust functional morphology of pig incisors and the tendency for pigs to encounter diverse foods and substrates during food exploration.

In-fiber Bragg sensor measurements assess fluid effects on strain in the periodontal space of an ex-vivo swine incisor complex under mechanical loading.

The purpose of this study is to determine whether in-fiber Bragg grating (FBG) sensors detect changes within the periodontal ligament (PDL) of ex-vivo swine tooth-PDL-bone complex (TPBC) when manipulating fluid content. Recording strain will allow for a better understanding of the biomechanics of viscoelastic load transfer from the tooth to the PDL during chewing and/or orthodontic tooth movement, as well as replication of these dynamics in regenerated PDL tissues. FBG sensors placed within the PDL of swine incisor teeth were used to measure strain resulting from an intrusive load. Specimens were mounted in a custom platform within an MTS machine and a compressive load was applied at 0.3 mm/s to a depth of 0.5 mm and held for 10 s. Median peak strain and load and median absolute deviation (MAD) were compared: dry vs. saline (n = 19) with bias-corrected bootstrap 95% CI. Dry vs. saline conditions did not statistically differ (median peaks of 5µÎµ, 103-105 N) and recorded strains showed high repeatability (MAD of 0.82µÎµ, 0.72µÎµ, respectively). FBG sensors did not detect the fluid changes in this study, suggesting that the deformation of tissues in the PDL space collectively determine FBG strain in response to tooth loading. The repeatability of measurements demonstrates the potential for FBG sensors to assess the strain in the PDL space of an in vivo swine model.

Cranial suture morphometry and mechanical response to loading: 2D vs. 3D assumptions and characterization.

Cranial sutures are complex soft tissue structures whose mechanics are often studied due to their link with bone growth in the skull. Researchers will often use a cross-sectional two-dimensional slice to define suture geometry when studying morphometry and/or mechanical response to loading. However, using a single cross section neglects the full suture complexity and may introduce significant errors when defining their form. This study aims to determine trends in suture path variability through skull thickness in a swine model and the implications of using a 'representative' cross section on mechanical modeling. To explore these questions, a mixture of quantitative analysis of computed tomography images and finite element models was used. The linear interdigitation and width of coronal and sagittal sutures were analyzed on offset transverse planes through the skull thickness. It was found that sagittal suture width and interdigitation were largely consistent through the skull thickness, whereas the coronal suture showed significant variation in both. The finite element study found that average values of displacement and strain were similar between the two-dimensionally variable and three-dimensionally variable models. Larger ranges and more complex distributions of strain were found in the three-dimensionally variable model. Outcomes of this study indicate that the appropriateness of using a representative cross section to describe suture morphometry and predict mechanical response should depend on specific research questions and goals. Two-dimensional approximations can be sufficient for less-interdigitated sutures and when bulk site mechanics are of interest, while taking the true three-dimensional geometry into account is necessary when considering spatial variability and local mechanical response.

Experimental repeatability, sensitivity, and reproducibility of force and strain measurements from within the periodontal ligament space during ex vivo swine tooth loading.

The Periodontal Ligament (PDL) is a complex connective tissue that anchors a tooth to the surrounding alveolar bone. The small size and complex geometry of the PDL space within an intact tooth-PDL-bone complex (TPBC) limits strain measurements. An in-fiber Bragg grating (FBG) sensor offers potential for such measurements due to its small size. This work defines an experimental procedure where strain and force were measured during quasi-static, apically directed, displacement-controlled tests on swine premolar crowns. Specifically, the: inter-TPBC, intra-TPBC, and long-term repeatability after a preconditioned state was objectively identified; sensitivity to preload magnitude, TPBC alignment, and sensor depth; and reproducibility within a TPBC was determined. Data clustering was used to determine the appropriate number of preconditioning trials, ranging from one to seven. Strain and force measurements showed intra-TPBC repeatability with average adjusted root mean square from the median of 28.9% of the peak strain and 4.5% of the peak force measurement. A Mann-Whitney U test generally found statistically significant differences in peak strain and force measurements between the left and right sides, suggesting a lack of inter-TPBC repeatability. Using a Friedman test, it was shown that peak strain measures were sensitive to the TPBC alignment and sensor depth, while peak force measures were sensitive to the preload and TPBC alignment. A Friedman test suggested reproducible strain and force measurements when the FBG was replaced within the same TPBC and the preload, alignment, and sensor depth were controlled.

Hyaluronan-CD44 interactions mediate contractility and migration in periodontal ligament cells.

The role of hyaluronan (HA) in periodontal healing has been speculated via its interaction with the CD44 receptor. While HA-CD44 interactions have previously been implicated in numerous cell types; effect and mechanism of exogenous HA on periodontal ligament (PDL) cells is less clear. Herein, we examine the effect of exogenous HA on contractility and migration in human and murine PDL cells using arrays of microposts and time-lapse microscopy. Our findings observed HA-treated human PDL cells as more contractile and less migratory than untreated cells. Moreover, the effect of HA on contractility and focal adhesion area was abrogated when PDL cells were treated with Y27632, an inhibitor of rho-dependent kinase, but not when these cells were treated with ML-7, an inhibitor of myosin light chain kinase. Our results provide insight into the mechanobiology of PDL cells, which may contribute towards the development of therapeutic strategies for periodontal healing and tissue regeneration.

Histological Development of the Fused Mandibular Symphysis in the Pig.

The development of the mandibular symphysis in late fetal and postnatal pigs, Sus scrofa dom. (n = 17), was studied as a model for the early fusing symphysis of anthropoid primates, including humans. The suture-like ligaments occurring in species that retain a mobile symphysis are not present in the pig. Instead, cartilage is the predominant tissue in the mandibular symphysis prior to fusion. In late fetuses the rostrum of the fused Meckel's cartilages forms a minor posterior component of the symphysis whereas the major component is secondary cartilage, developing bilaterally and joined at the midline with mesenchyme. This remnant of Meckel's cartilage likely fuses with the flanking secondary cartilage. The overall composition of pig symphyseal histology in fetal and infant animals varies regionally and individually. Regions where the paired secondary cartilages abut in the midline resemble double growth plates. Chondrogenic growth in width of the symphysis is likely important in early stages, and central proliferation of mesenchyme is the probable source of new chondrocytes. Laterally, the chondrocytes hypertrophy near the bone fronts and are replaced by alveolar bone. Complete synostosis except for a small cartilage remnant had occurred in one 8-week-old postnatal specimen and all older specimens. Surprisingly, however, the initial phase of symphyseal fusion, observed in a 5-week-old postnatal specimen, involved intramembranous ossification of midline mesenchyme rather than endochondral ossification. Subsequently, fusion progresses rapidly at the anterior and labial aspects of the symphysis, leaving only a small postero-lingual cartilage pad that persists for at least several months. Anat Rec, 302:1372-1388, 2019. © 2018 Wiley Periodicals, Inc.

Experimental ex vivo traumatic intrusion in the mandibular incisors of the farm pig, Sus scrofa.

BACKGROUND/AIM: Traumatic intrusion of incisor teeth occurs frequently in young children, as well as in teens and adults; however, the biological mechanisms promoting negative sequelae or recovery are not well understood (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2009;107:493 and Vital Health Stat 11 2007;248:1). Modeling intrusive trauma and post-traumatic healing in an animal model offers the opportunity to define these biological mechanisms and to inform the design of treatments. The objective of this study was to investigate the pig, Sus scrofa, as a model for intrusive trauma, using an in vitro approach. MATERIALS AND METHODS: Mandibular segments from ex vivo farm pigs were bisected and primary central incisors were prepared to either receive axial traumatic loads or to serve as non-intruded controls. A class 2 lever modeled traumatic impact to the incisors. Damage to the periodontal support in intruded and control specimens (n = 10) was evaluated through compression testing and comparison of elastic moduli. Incisor displacement was measured on X-ray images taken before and after trauma, and following compressive tests. RESULTS: Lingual x-rays showed a mean postinjury displacement of the incisor root of 3.81 ± 1.87 mm. With compression testing, the root length embedded in bone increased in traumatized and non-traumatized teeth by 2.9 mm and 0.81 mm, respectively (P = 0.03). The intrusion group Young's modulus was significantly lower than the control group (4452 vs 7704 Mpa; P = 0.05). CONCLUSION: In vitro modeling of traumatic intrusion resulted in damage to the periodontal support of central incisors and axial tooth displacement. Pig incisors offer an important model for further study of incisor trauma.

Molecular and structural assessment of alveolar bone during tooth eruption and function in the miniature pig, sus scrofa.

The development of alveolar bone adjacent to the tooth root during tooth eruption is not well understood. This study tested the hypothesis that predominantly woven bone forms adjacent to tooth roots during tooth eruption, but that this immature structure transitions to lamellar bone when the tooth comes into function. Additionally, bone resorption was predicted to play a key role in transitioning immature bone to more mature, load-bearing tissue. Miniature pigs were compared at two occlusal stages, 13 weeks (n = 3), corresponding with the mucosal penetration stage of M(1) tooth eruption, and 23 weeks (n = 3), corresponding with early occlusion of M(1) /M(1) . Bone samples for RNA extraction and qRT-PCR analysis were harvested from the diastema and adjacent to M(1) roots on one side. Following euthanasia, bone samples for haematoxylin and eosin and TRAP staining were harvested from these regions on the other side. In contrast to expectations, both erupting and functioning molars had reticular fibrolamellar structure in alveolar bone adjacent to M(1) . However, the woven bone matrix in older pigs was thicker and had denser primary osteons. Gene expression data and osteoclast cell counts showed a tendency for more bone resorptive activity near the molars than at distant sites, but no differences between eruptive stages. Thus, although resorption does occur, it is not a primary mechanism in the transition in alveolar bone from eruption to function. Incremental growth of existing woven bone and filling in of primary osteons within the mineralized scaffold generated the fortification necessary to support an erupted and functioning tooth.

The impact of occlusal function on structural adaptation in alveolar bone of the growing pig, Sus Scrofa.

OBJECTIVES: this study investigated the effects of growth and tooth loading on the structural adaptation of the developing alveolar bone adjacent to the tooth root as the tooth erupted into function. Growth and occlusal function were expected to lead to increased alveolar bone density. Meanwhile, the supporting alveolar bone was expected to develop a dominant trabecular orientation (anisotropy) only after occlusal loading. DESIGN: minipigs with erupting and occluding mandibular first molars (M(1)'s) were used to study the effects of growth and occlusal function on developing alveolar bone structure through comparison of alveolar bone surrounding M(1)'s. A second minipig model with one side upper opponent teeth extracted prior to occlusal contact with the M(1) was raised until the non-extraction side M(1)'s developed full occlusal contact. The comparisons between extraction and non-extraction side M(1) alveolar bone were used to emphasize the impact of occlusal loading on alveolar bone structure. Specimens were scanned on a Scanco Medical µCT 20 at a 22µm voxel resolution for structural analysis. RESULTS: with growth and occlusal function a distinct alveolar bone proper tended to develop immediately adjacent to the tooth root. The cancellous bone had thicker but fewer and more separated trabeculae after growth or occlusal loading. On the other hand, occlusal function did not lead to increased alveolar structural anisotropy. CONCLUSION: during tooth eruption, growth and masticatory loads effect structural change in alveolar bone. The impact of occlusal function on cancellous bone anisotropy may need a more extensive period of time to demonstrate.

Advances in defining regulators of cementum development and periodontal regeneration.

Substantial advancements have been made in defining the cells and molecular signals that guide tooth crown morphogenesis and development. As a result, very encouraging progress has been made in regenerating crown tissues by using dental stem cells and recombining epithelial and mesenchymal tissues of specific developmental ages. To date, attempts to regenerate a complete tooth, including the critical periodontal tissues of the tooth root, have not been successful. This may be in part due to a lesser degree of understanding of the events leading to the initiation and development of root and periodontal tissues. Controversies still exist regarding the formation of periodontal tissues, including the origins and contributions of cells, the cues that direct root development, and the potential of these factors to direct regeneration of periodontal tissues when they are lost to disease. In recent years, great strides have been made in beginning to identify and characterize factors contributing to formation of the root and surrounding tissues, that is, cementum, periodontal ligament, and alveolar bone. This review focuses on the most exciting and important developments over the last 5 years toward defining the regulators of tooth root and periodontal tissue development, with special focus on cementogenesis and the potential for applying this knowledge toward developing regenerative therapies. Cells, genes, and proteins regulating root development are reviewed in a question-answer format in order to highlight areas of progress as well as areas of remaining uncertainty that warrant further study.

Load transmission in the nasofrontal suture of the pig, Sus scrofa.

The nasofrontal suture links the nasal complex with the braincase and is subject to compressive strain during mastication and (theoretically) tensile strain during growth of nasal soft tissues. The suture's ability to transmit compressive and tensile loads therefore affects both cranioskeletal stress distribution and growth. This study investigated the in vitro viscoelastic and failure properties of the nasofrontal suture in the pig, Sus scrofa. Suture specimens from two ages were tested in compression and tension and at fast and slow rates. In additional specimens, strain gauges were applied to the suture and nasal bone for strain measurement during testing. Relaxation testing demonstrated higher elastic moduli in tension than compression, regardless of test rate or pig age. In contrast, maximum elastic moduli from failure tests, as well as peak stresses, were significantly higher in compression than in tension. Sutures from older pigs tended to have higher elastic moduli and peak stresses, significantly so for tensile relaxation moduli. Strain gauge results showed that deformation at the suture was much greater than that of the nasal bone. These data demonstrate the viscoelasticity and deformability of the nasofrontal sutural ligament. The suture achieved maximal resistance to tensile deformation at low loads, corresponding with the low tensile loads likely to occur during growth of nasal soft tissues. In contrast, the maximal stiffness in compression at high loads indicates that the suture functions with a substantial safety factor during mastication.

The crowning achievement: getting to the root of the problem.

An ideal goal of oral-craniofacial dental reconstructive therapy is to establish treatment modalities that predictably restore functional tissues. One major area of focus has been in the area of dental materials with marked improvements in the design of materials used to restore teeth/periodontium/bone lost as a consequence of disease or disorders. With advances in understanding the cell and molecular controls for development and regeneration of tooth structures, it is now possible to consider therapies that promote regeneration of lost tissues, along with replacement of these tissues. This review presents a background on our current knowledge as to the composition of the tooth/periodontium followed by a discussion on successes to date, both in vitro and in vivo, toward regenerating a whole tooth and next steps required to regenerate a functional tooth.

Postcanine dental form in the mustelidae and viverridae (Carnivora: Mammalia).

This study investigates whether the gross morphology of mustelid and viverrid postcanine dentitions corresponds with differences in diet. For each species, the predominant foods ingested are used to form predictions of dental form and measurements of the carnassial and molar teeth determine the extent of shearing and crushing surfaces on the postcanine teeth. Principal components analysis distinguishes species according to morphological differences in the dentition and these differences are compared with predictions of dental form based on diet. Dietarily specialized species are more likely to be correspondingly specialized in the dentition and species with varied food sources are more likely to possess dental characteristics that are generalized in function. Consumers of foods with high fracture resistance, such as vertebrate tissue and hard-surfaced invertebrates, possess specialized shearing or crushing postcanine teeth. On the other hand, species that consume foods of lesser fracture resistance, such as fruit and soft invertebrates, differ greatly in dental form and are more generalized in dental function. A few species possess postcanine dentitions that do not correspond with diet; the absence of dental-dietary correlation in these species suggests that other factors, such as phylogeny, are important in determining dental form.