Elevated CO2 ameliorates the high temperature stress effects on physio-biochemical, growth, yield traits of maize hybrids.

The rising temperatures and levels of carbon dioxide in the atmosphere are anticipated to have a significant impact on the productivity of agricultural crops. Although, the individual effects of elevated CO2 and temperature have been extensively studied in C3 and C4 crops, there remains a scarcity of research investigating their interactive effects specifically on maize hybrids. The impact of elevated temperature and its interaction with elevated CO2 on phenology, physiology, biomass, and grain yield of maize hybrids was assessed in a field experiment using Free Air Temperature Elevation (FATE) facility. The results showed that elevated temperature (eT) increased the anthesis silking interval (ASI), while the presence of elevated CO2 along with elevated temperature (eT + eCO2) mitigated this effect. The differential expression were observed between hybrids depending on their genetic potential. Furthermore, the net photosynthetic rate (Anet), stomatal conductance (gs), and transpiration rate (Tr) of hybrids decreased under elevated temperature but eT + eCO2 condition helped in reverting its impact to some extent. In term of leaf composition, the highest level of total soluble sugars (TSS) and starch was observed under eT + eCO2 conditions, possibly due to improved Anet in the presence of elevated eCO2. The negative impact of eT was also evident through increased proline and MDA content, but eT + eCO2 ameliorated the adverse effect of eT. The biomass and grain yield also responded similarly, among the hybrids 900M GOLD recorded superior performance for grain yield at eT condition exceeding 35 °C. On the other hand, DHM117 experienced a significant reduction in grain yield under eT, but performed better under eT + eCO2 due to its improved physiological response to eCO2. The study indicated that elevated levels of carbon dioxide can actually mitigate the detrimental effects of elevated temperature on maize crop. This positive impact on maize crop can be attributed to an enhanced physiological performance in the presence of eCO2 which enables the plants to maintain satisfactory yield levels despite the challenging environmental conditions.

Non-invasive measurements to identify mungbean genotypes for waterlogging tolerance.

As the best-fit leguminous crop for intercropping across time and space, mungbean promises to sustain soil health, carbon sequestration, and nutritional security across the globe. However, it is susceptible to waterlogging, a significant constraint that persists during heavy rains. Since the predicted climate change scenario features fewer but more intense rainy days. Hence, waterlogging tolerance in mungbean has been one of the major breeding objectives. The present experiment aimed to employ non-destructive tools to phenotype stress tolerance traits in mungbean genotypes exposed to waterlogging and estimate the association among the traits. A total of 12 mungbean genotypes were used in the present study to assess waterlogging tolerance at the seedling stage. Plant responses to stress were determined non-destructively using normalized difference vegetation index (NDVI) and chlorophyll fluorescence parameters at different time intervals. NDVI and grain yield were positively associated with control (r = 0.64) and stress (r = 0.59). Similarly, chlorophyll fluorescence (quantum yield of PS-II) also had a significant positive association with grain yield under both control (r = 0.52) and stress (r = 0.66) conditions. Hence, it is suggested that NDVI and chlorophyll fluorescence promise to serve as traits for non-destructive phenotyping waterlogging tolerance in mungbean genotypes. With the methods proposed in our study, it is possible to phenotype hundreds of plants for waterlogging tolerance efficiently.

Non-isolated high gain DC-DC converter with ripple-free source current.

In this paper, an interleaved DC-DC converter with high voltage gain capability is presented. The proposed converter is synthesized from a coupled-inductor (CI) based interleaved boost converter (IBC). For enhancing the voltage gain capability, voltage-lift capacitor, and diode-capacitor multiplier (DCM) cells are employed at the primary and secondary sides of the CIs. The proposed hybrid gain extension concept is practically validated using simulation and experimentation. A 185W prototype version of the proposed converter is switched at 50 kHz under laboratory conditions from a 18 V input to realize 380 V at the output port. The switches in the proposed converter operate at 0.5 duty ratio and experience a very low voltage stress of only 10.5% of the output voltage. Moreover, due to the interleaving mechanism, the input current ripple is just 11% of the total input current and the current rating of the switches is halved. Due to the adopted gain extension mechanism, the voltage stress on almost all the diodes is also significantly reduced. The swift dynamic response of the converter under closed-loop conditions is also practically demonstrated. Further, the beneficial features of the proposed converter are clearly validated by benchmarking its parameters with many state-of-the art converters which are available in literature.

Do rainfed production systems have lower environmental impact over irrigated production systems?: On -farm mitigation strategies.

The intensive agriculture practices improved the crop productivity but escalated energy inputs (EI) and carbon foot print (CF) which contributes to global warming. Hence designing productive, profitable crop management practices under different production systems with low environmental impact (EI and CF) is the need of the hour. To identify the practices, quantification of baseline emissions and the major sources of emissions are required. Indian agriculture has diversified crops and production systems but there is dearth of information on both EI and CF of these production systems and crops. Hence the present study was an attempt to find hot spots and identify suitable strategies with high productivity, energy use efficiency (EUE) and carbon use efficiency (CUE). Energy and carbon balance of castor, cotton, chickpea, groundnut, maize, rice (both rainfed and irrigated), wheat, sugarcane (only irrigated), pigeon pea, soybean, sorghum, pearl millet (only rainfed) in different production systems was assessed. Field specific data on different crop management practices as well as grain and biomass yields were considered. Rainfed production systems had lower EI and CF than irrigated system. The nonrenewable sources of energy like fertilizer (64 %), irrigation (78 %), diesel fuel (75 %) and electricity (67 %) are the major source of energy input. Rainfed crops recorded higher CUE over irrigated condition. Adoption of technologies like efficient irrigation strategies (micro irrigation), enhancing fertilizer use efficiency (site specific nutrient management or slow release fertilizer), conservation agriculture (conservation or reduced tillage) rice cultivation methods (SRI or Direct seeded rice) were the mitigation strategies. These results will help policy makers and stake holders in adoption of suitable strategies for sustainable intensification.

Study on the Effect of Core-Shell Abaca Vascular Carriers on the Self-Healing and Mechanical Properties of Thermoset Panels.

Self-healing panels were prepared using vinyl ester (VE) and vascular abaca fibers (unidirectional) through the hand lay-up process. Initially, two sets of abaca fibers (AF) were prepared by filling the healing resin VE and hardener and stacking both core-filled unidirectional fibers in a 90° direction to obtain sufficient healing. The experimental results demonstrated that the healing efficiency increased by approximately 3%. SEM-EDX analysis further confirmed the healing process by exhibiting spill-out resin and the respective fibers' major chemical elements at the damaged site after self-healing. The tensile, flexural, and Izod impact strengths of self-healing panels indicated improved strengths of 7.85%, 49.43%, and 53.84%, respectively, compared with fibers with empty lumen-reinforced VE panels due to the presence of a core and interfacial bonding between the reinforcement and matrix. Overall, the study proved that abaca lumens could effectively serve as healing carriers for thermoset resin panels.

Pest scenario of Helicoverpa armigera (Hub.) on pigeonpea during future climate change periods under RCP based projections in India.

Gram pod borer, Helicoverpa armigera (Hub.) is the major insect pest of pigeonpea and prediction of number of generations (no. of gen.) and generation time (gen. time) using growing degree days (GDD) approach during three future climate change periods viz., Near (NP), Distant (DP) and Far Distant (FDP) periods at eleven major pigeonpea growing locations of India was attempted. Multi-model ensemble of Maximum (Tmax) and Minimum (Tmin) temperature data of four Representative Concentration Pathways viz., RCP 2.6, 4.5, 6.0 and 8.5 of Coupled Model Inter comparison Project 5 (CMIP5) models was adopted here. The increase in projected Tmax and Tmin are significant during 3 climate change periods (CCPs) viz., the NP, DP and FDP over base line (BL) period under four RCP scenarios at all locations and would be higher (4.7-5.1 °C) in RCP 8.5 and in FDP. More number of annual (10-17) and seasonal (5-8) gens. are expected to occur with greater percent increase in FDP (8 to 38%) over base line followed by DP (7 to 22%) and NP (5to 10%) periods with shortened annual gen. time (4 to 27%) across 4 RCPs. The reduction of crop duration was substantial in short, medium and long duration pigeonpeas at all locations across 4 RCPs and 3 CCPs. The seasonal no.of gen. is expected to increase (5 to 35%) with shortened gen. time (4 to 26%) even with reduced crop duration across DP and FDP climate periods of 6.0 and 8.5 RCPs in LD pigeonpea. More no. of gen. of H. armigera with reduced gen. time are expected to occur at Ludhiana, Coimbatore, Mohanpur, Warangal and Akola locations over BL period in 4 RCPs when normal duration of pigeonpeas is considered. Geographical location (66 to 72%), climate period (11 to 19%), RCPs (5-7%) and their interaction (0.04-1%) is vital and together explained more than 90% of the total variation in future pest scenario. The findings indicate that the incidence of H. armigera would be higher on pigeonpea during ensuing CCPs in India under global warming context.

Volatile Compounds Governed by Single Recessive Gene Impart Aroma in Sponge Gourd (Luffa cylindrica L. Roem).

As a vegetable crop, sponge gourd is widely consumed worldwide due to its health promoting and nutraceutical value. This study describes genetics of an aromatic genotype VRSG-7-17 and deciphers the genetic control and volatile compound composition of sponge gourd. To study the inheritance of this trait, a cross was made between aromatic light-green-fruited VRSG-7-17 and non-aromatic dark-green-fruited VRSG-194 genotypes. The F1s were found to be non-aromatic and have a green fruit colour. Chi-square (χ2) analysis of backcross and F2 population segregating for aroma suggested that the inheritance of aroma in VRSG-7-17 is governed by a single recessive gene in a simple Mendelian fashion. The SPME-GC/MS analysis of the volatile compounds suggested that the compounds responsible for Basmati rice-like aroma were mainly hexanal, 1-octen-3-ol, 3-octanone and limonene. The aroma persists in the cooked VRSG-7-17 fruits, that did not lose fragrance traits at high temperatures. The inheritance of fruit colour was found to be controlled by a single gene with incomplete dominance. The segregation analysis showed that the aroma and fruit colour were not linked, and they segregated independently. The findings will lead to understanding the inheritance of the aromatic compounds in the sponge gourd and may be utilised in the breeding programmes for developing improved aromatic varieties.

Evaluating area-specific adaptation strategies for rainfed maize under future climates of India.

This study investigates the spatio-temporal changes in maize yield under projected climate and identified the potential adaptation measures to reduce the negative impact. Future climate data derived from 30 general circulation models were used to assess the impact of future climate on yield in 16 major maize growing districts of India. DSSAT model was used to simulate maize yield and evaluate adaptation strategies during mid (2040-69) and end-centuries (2070-99) under RCP 4.5 and 8.5. Genetic coefficients were calibrated and validated for each of the study locations. The projected climate indicated a substantial increase in mean seasonal maximum (0.9-6.0 °C) and minimum temperatures (1.1-6.1 °C) in the future (the range denotes the lowest and highest change during all the four future scenarios). Without adaptation strategies, climate change could reduce maize yield in the range of 16% (Tumkur) to 46% (Jalandhar) under RCP 4.5 and 21% (Tumkur) to 80% (Jalandhar) under RCP 8.5. Only at Dharwad, the yield could remain slightly higher or the same compared to the baseline period (1980-2009). Six adaptation strategies were evaluated (delayed sowing, increase in fertilizer dose, supplemental irrigation, and their combinations) in which a combination of those was found to be effective in majority of the districts. District-specific adaptation strategies were identified for each of the future scenarios. The findings of this study will enable in planning adaptation strategies to minimize the negative impact of projected climate in major maize growing districts of India.

Gene-Based Resistance to Erysiphe Species Causing Powdery Mildew Disease in Peas (Pisum sativum L.).

Globally powdery mildew (PM) is one of the major diseases of the pea caused by Erysiphe pisi. Besides, two other species viz. Erysiphe trifolii and Erysiphe baeumleri have also been identified to infect the pea plant. To date, three resistant genes, namely er1, er2 and Er3 located on linkage groups VI, III and IV respectively were identified. Studies have shown the er1 gene to be a Pisum sativum Mildew resistance Locus 'O' homologue and subsequent analysis has identified eleven alleles namely er1-1 to er1-11. Despite reports mentioning the breakdown of er1 gene-mediated PM resistance by E. pisi and E. trifolii, it is still the most widely deployed gene in PM resistance breeding programmes across the world. Several linked DNA markers have been reported in different mapping populations with varying linkage distances and effectiveness, which were used by breeders to develop PM-resistant pea cultivars through marker assisted selection. This review summarizes the genetics of PM resistance and its mechanism, allelic variations of the er gene, marker linkage and future strategies to exploit this information for targeted PM resistance breeding in Pisum.

ß-Lactoglobulin-gold nanoparticles interface and its interaction with some anticancer drugs - an approach for targeted drug delivery.

The protein-nanoparticle interface plays a crucial role in drug binding and stability, in turn enhancing efficacy in targeted drug delivery. In the present study, whey protein ß-lactoglobulin (BLG) is conjugated with gold nanoparticles (AuNP) and its interaction with curcumin (CUR) and gemcitabine (GEM) has been explored. Further, AuNP-BLG conjugate interactions with anticancer drugs were characterized using dynamic light scattering (DLS), zeta potential, UV-visible, Raman spectroscopy, fluorescence, circular dichroism along with molecular dynamics simulation. The cytotoxicity studies were performed using breast cancer cell lines (MCF-7). ∼8 µM of BLG resides on AuNP (∼29 nm) surface revealed by DLS. Raman scattering of AuNP-BLG conjugate showed orientation of the central calyx of BLG towards solvent. BLG fluorescence confirmed the interaction between AuNP-BLG conjugate with drugs and indicated strong binding and affinity (for CUR KD = 3.71 x 108 M -1, n = 1.83, and for GEM KD = 3.78 x 103 M -1, n = 0.94), enhanced in the presence of AuNP. CD and Raman analysis exhibited selective hydrophilic and hydrophobic conformations induced by drug binding. Computational studies on BLG-drug complexes revealed that the residues Pro38, Leu39 and Met107 are largely associated with CUR binding, while GEM interaction is via hydrophilic contacts which significantly matches with spectroscopic investigation. IC50 values were calculated for all components of this loading system on MCF-7. The possible mechanisms of interaction between AuNP-BLG with anticancer drugs has been explored at the molecular level. We believe that these conjugates could be considered in the targeted drug delivery studies for cancer research.Communicated by Ramaswamy H. Sarma.

Heat stress tolerance in peas (Pisum sativum L.): Current status and way forward.

In the era of climate change, the overall productivity of pea (Pisum sativum L.) is being threatened by several abiotic stresses including heat stress (HS). HS causes severe yield losses by adversely affecting several traits in peas. A reduction in pod yield has been reported from 11.1% to 17.5% when mean daily temperature increase from 1.4 to 2.2°C. High-temperature stress (30.5-33°C) especially during reproductive phase is known to drastically reduce both seed yield and germination. HS during germination and early vegetative stage resulted in poor emergence and stunted plant growth along with detrimental effects on physiological functions of the pea plant. To combat HS and continue its life cycle, plants use various defense strategies including heat escape, avoidance or tolerance mechanisms. Ironically, the threshold temperatures for pea plant and its responses are inconsistent and not yet clearly identified. Trait discovery through traditional breeding such as semi leaflessness (afila), upright growing habit, lodging tolerance, lower canopy temperature and small seeded nature has highlighted their utility for greater adaptation under HS in pea. Screening of crop gene pool and landraces for HS tolerance in a targeted environment is a simple approach to identify HS tolerant genotypes. Thus, precise phenotyping using modern phenomics tools could lead to increased breeding efficiency. The NGS (next generation sequencing) data can be associated to find the candidate genes responsible for the HS tolerance in pea. In addition, genomic selection, genome wide association studies (GWAS) and marker assisted selection (MAS) can be used for the development of HS tolerant pea genotypes. Additionally, development of transgenics could be an alternative strategy for the development of HS tolerant pea genotypes. This review comprehensively covers the various aspects of HS tolerance mechanisms in the pea plant, screening protocols, omic advances, and future challenges for the development of HS tolerant genotypes.

Investigation of Mechanical and Physical Properties of Big Sheep Horn as an Alternative Biomaterial for Structural Applications.

This paper investigates the physical and mechanical properties of bighorns of Deccani breed sheep native from Karnataka, India. The exhaustive work comprises two cases. First, rehydrated (wet) and ambient (dry) conditions, and second, the horn coupons were selected for longitudinal and lateral (transverse) directions. More than seventy-two samples were subjected to a test for physical and mechanical property extraction. Further, twenty-four samples were subjected to physical property testing, which included density and moisture absorption tests. At the same time, mechanical testing included analysis of the stress state dependence with the horn keratin tested under tension, compression, and flexural loading. The mechanical properties include the elastic modulus, yield strength, ultimate strength, failure strain, compressive strength, flexural strength, flexural modulus, and hardness. The results showed anisotropy and depended highly on the presence of water content more than coupon orientation. Wet conditioned specimens had a significant loss in mechanical properties compared with dry specimens. The observed outcomes were shown at par with results for yield strength of 53.5 ± 6.5 MPa (which is better than its peers) and a maximum compressive stress of 557.7 ± 5 MPa (highest among peers). Young's modulus 6.5 ± 0.5 GPa and a density equivalent to a biopolymer of 1.2 g/cc are expected to be the lightest among its peers; flexural strength 168.75 MPa, with lowest failure strain percentage of 6.5 ± 0.5 and Rockwell hardness value of 60 HRB, seem best in the class of this category. Simulation study identified a suitable application area based on impact and fatigue analysis. Overall, the exhaustive experimental work provided many opportunities to use this new material in various diversified applications in the future.

Bhendi Yellow Vein Mosaic Virus and Bhendi Yellow Vein Mosaic Betasatellite Cause Enation Leaf Curl Disease and Alter Host Phytochemical Contents in Okra.

Whitefly (Bemisia tabaci)-transmitted begomoviruses cause severe diseases in numerous economically important dicotyledonous plants. Okra enation leaf curl disease (OELCuD) has emerged as a serious threat to okra (Abelmoschus esculentus L. Moench) cultivation in the Indian subcontinent. This study reports the association of a monopartite begomovirus (bhendi yellow vein mosaic virus; BYVMV) and betasatellite (bhendi yellow vein mosaic betasatellite; BYVB) with OELCuD in the Mau region of Uttar Pradesh, India. The BYVMV alone inoculated Nicotiana benthamiana and A. esculentus cv. Pusa Sawani plants developed mild symptoms. Co-inoculation of BYVMV and BYVB resulted in a reduced incubation period, an increased symptom severity, and an enhanced BYVMV accumulation by Southern hybridization and quantitative real-time PCR. This is the first study that satisfies Koch's postulates for OELCuD in its natural host. Activities of various antioxidative enzymes were significantly increased in the virus-inoculated okra plants. Differential responses in various biochemical components (such as photosynthetic pigments, phenol, proline, and sugar) in diseased okra plants were observed. This change in phytochemical responses is significant in understanding its impact on virus pathogenesis and disease development.

Synthesis of vinyl ester resin-carrying PVDF green nanofibers for self-healing applications.

Self-healing on the engineering applications is smart, decisive research for prolonging the life span of the materials and the innovations have been mounting still smarter. Connecting to advancements in self-healing carriers, in altering the chemical structure by optimizing the brittleness for self-healing performance and introducing the bio-degradability, for the first time TPS was blended to PVDF for the synthesis of nanofibers, as carriers of a vinyl ester (VE) resin (medication), by the coaxial electrospinning technique. TPS was mechanically mixed with PVDF base polymer and optimized the TPS content (10 wt%) based on mechanical performance. The novel nanofibers were characterized via field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy, X-ray diffraction, thermal, moisture analysis, and a mechanical line with FESEM and energy-dispersive X-ray analysis studied the self-healing. The TPS/PVDF fibers having hydrogen bonding and increased the crystallinity (40.57 → 44.12%) and the diameter (115 → 184 nm) along with the surface roughness of the fibers with increasing the TPS content. Microanalysis presented the flow-out of the VE resin at the scratched parts in the pierced fibers; interestingly, after some time, the etched part was cured automatically by the curing of the spread resin. Mechanical stretching of the nanofibers in the tensile tests up in the plastic region showed a decrement in the elasticity (TPS/PVDF fibers) and an increment in the brittle nature (cured VE resin) with the increase in Young's modulus at each stretching, clearly elucidating the healing performance.

A Heparin based dual ratiometric sensor for Thrombin.

Thrombin is an important enzyme that plays a pivotal role in the blood clotting pathways. An imbalance in the activity of this enzyme is clinically known to be associated with various diseases, such as thrombosis, inflammation, atherosclerosis, and haemophilia, suggesting the need to devise sensors for Thrombin detection. However, the majority of the fluorescence-based Thrombin assays rely on fluorescence labelling assays or Thrombin specific recognition biomolecules, such as, aptamers or antibody which requires sophisticated techniques and makes it very expensive. Herein, we report a simple, selective, sensitive and label-free fluorescence detection scheme for Thrombin which is based on the interaction between Thrombin and a fluorescent complex of Heparin with a molecular rotor dye, Thioflavin-T. The detection scheme exploits selective interaction between cationic Thrombin and anionic Heparin to modulate the monomer-aggregate equilibrium of the Thioflavin-T-Heparin system. Importantly, the present system offers a ratiometric response that has the ability for robust quantification of Thrombin concentration even in complex medium. The involvement of all commercially available components is a crucial advantage of this detection scheme. Further, the detection scheme also shows reasonable response in diluted serum matrix.

Pediatric nasal dermoid- a decade's experience from a South Indian tertiary care centre.

INTRODUCTION: Nasal dermoid sinus cyst (NDSC) are uncommon congenital lesions in children. OBJECTIVE: To review the clinical and radiological presentation and study the surgical outcomes of this uncommon lesion. METHOD: Retrospective chart review of all children diagnosed with nasal dermoid from 2010 to 2020 at a tertiary referral hospital in South India was executed. The medical records were reviewed for demographics, lesion characteristics, imaging, operative details, and outcomes and literature review was performed. RESULT: A total of 25 children [Mean age 3.7 yrs (Range 2-9 yrs)] with nasal dermoid sinus cysts were treated in the last decade. While 13 presented with a sinus, 11 presented with cyst and 1 had both. The lesions mainly involved the upper third of the nose in 10 children, middle one third in 6 and upper one third in 9 children. All underwent Magnetic Resonance Imaging, in 11 Computed Tomography also was done. A flow chart of the lesion characteristics and its management has been presented. Intraoperatively intracranial extension was present in four children. The approach to intracranial extension and corresponding literature review has been presented. Follow up ranged from one to six years. (Median 3.5 yrs) and no recurrence or complication was noted. CONCLUSION: Nasal dermoid is an uncommon congenital anomaly. Preoperative evaluation must include imaging to assess extent and rule out intracranial extension. Surgical strategy depends on whether presentation is as sinus or cyst and location and extent of lesion. All surgical approaches have a good surgical and cosmetic outcome.

An anionic polyelectrolyte induced aggregate assembly of Thioflavin-T: A prospective platform for Protamine sensing.

Protamine, a polycation, is biologically and medically relevant protein. Protamine exhibits a wide array of functions in biological processes like gene transfer, tissue and organogenesis, cell reproduction, etc. Medically, Protamine is the only clinically approved antidote for Heparin and is routinely used in various surgical interventions, and hence controlling Protamine dosing in patients is very crucial. Taking into account the medical significance of Protamine, designing simple, reliable and sensitive fluorescence sensors is highly desirable. In this work, we propose one such sensitive and reliable fluorescent sensor which is based on a template of dye-polyelectrolyte assembly constituting a molecular rotor dye, Thioflavin-T and an anionic synthetic polyelectrolyte, polystyrene sulfonate. The addition of Protamine, prompts drastic modulations in spectral features of dye-polyelectrolyte assembly which enables sensitive detection of Protamine in aqueous solution. Apart from sensitive detection, our sensing platform aids in highly selective sensing of Protamine compared to other proteins. Moreover, our sensor system is constructed on label-free, inexpensive, commercially available molecules posing as an advantage over other sensor systems which involve laborious synthesis protocols. Most importantly, our sensor template is able to sense Protamine in diluted serum sample, indicating the potential practical utility of our sensor system.

Vasculitis: A Checklist to Approach and Treatment Update for Dermatologists.

Vasculitis poses a great diagnostic, investigative and therapeutic challenge to the treating physician. The classification of vasculitides itself still eludes universal acceptance. Comprehensive management comprises establishing the diagnosis of true vasculitis after ruling out vasculitis mimics, finding the etiology if feasible, assessing the caliber of the vessels involved, deciphering the pathological process of vessel damage, investigating for the existence and extent of systemic involvement and finally planning the therapy in the background of co-morbidities. Successful management also entails regular monitoring to foresee complications arising from the disease process itself as well as complications of immunosuppressive treatment. Although steroids remain first line drug, biologics are emerging as popular agents in the treatment of immune-mediated vasculitis. Triphasic treatment is the best plan of action comprising induction, maintenance of remission and treatment of relapses.

Inhibition of crude viper venom action by silver nanoparticles: A biophysical and biochemical study.

This investigation understands the interaction between lyophilized crude Viper snake venom (Doboia russellie) and Silver nanoparticles (SNPs) using biophysical and biochemical approaches. SNPs were synthesized by chemical reduction method and characterized using UV-Visible spectroscopy, Dynamic Light Scattering (DLS) and Transmission electron microscope (TEM). The average hydrodynamic size of SNPs was found to be 52 nm with 0.261 PDI. TEM image revealed the spherical shape of SNP. Interaction of SNPs and viper venom was resulted in the formation of complex which was confirmed by using DLS technique. Spectroscopic results showed an increase in absorbance intensity of venom upon interaction with SNPs which indicated interaction with venom proteins. Fluorescence spectroscopic data revealed the quenching in the fluorescence intensity of viper venom upon incubation with varying concentration of SNPs. The results obtained by biochemical assays (Protease and whole blood clotting test) revealed the inhibition of venom action due to presence of silver nanoparticles. The activity of protease enzyme was found to be decreased (10-13% reduction) in presence of silver nanoparticles. Prolonged clotting time (two fold) of viper venom upon interaction with SNPs compared to native crude viper venom was observed. The overall results confirmed the inhibition action of silver nanoparticles against viper venom.

Development and characterization of penta-flowering and triple-flowering genotypes in garden pea (Pisum sativum L. var. hortense).

This study reports the development of a garden pea genotype 'VRPM-901-5' producing five flowers per peduncle at multiple flowering nodes, by using single plant selection approach from a cross 'VL-8 × PC-531'. In addition, five other stable genetic stocks, namely VRPM-501, VRPM-502, VRPM-503, VRPM-901-3 and VRPSeL-1 producing three flowers per peduncle at multiple flowering nodes were also developed. All these unique genotypes were of either mid- or late- maturity groups. Furthermore, these multi-flowering genotypes were identified during later generations (F4 onward), which might be because of fixation of certain QTLs or recessive gene combinations. Surprisingly, a common parent PC-531, imparting multi-flowering trait in ten cross combinations was identified. Thus, the genotype PC-531 seems to harbor some recessive gene(s) or QTLs that in certain combination(s) express the multi-flowering trait. The interaction between genotype and environment showed that temperature (11-20°C) plays a key role in expression of the multi-flowering trait besides genetic background. Furthermore, the possible relationship between various multi-flowering regulatory genes such as FN, FNA, NEPTUNE, SN, DNE, HR and environmental factors was also explored, and a comprehensive model explaining the multi-flowering trait in garden pea is proposed.