ABSTRACT
The first high-protein rice variety of India, CR Dhan 310, developed at ICAR-NRRI, Cuttack is being selected for the study. It contains 10.1% protein in milled rice as compared to 6-7% protein content in the milled rice of any other normal variety. It has intermediate amylose content (25.1%), medium bold grains rich in protein (10.1%) The significant changes in properties of raw and parboiled rice on processing were studied at statistical differences of p ≤ 0.05. These properties included physical, optical, antioxidant and rheological properties which changed with different processing techniques. All the three processes namely, puffing, popping and flaking increased the dimensions as compared to the raw rice. Peak viscosity measurements demonstrated the breakdown of starch molecules, with white rice having the greatest value (4145 cP) and popped rice having the lowest value (2017 cP) as a result of the starch granules being gelatinized during the production of popped rice. Highest anthocyanin content (2.93â mg/100â g) was observed in puffed rice, phenolic content (347.93â mg/100â g) was highest in popped rice and flaked/flattened rice showed highest flavonoid content (127.12â mg/100â g) indicating that tertiary processing of rice obtained higher values of phytochemicals when compared to the plain high-protein rice. This indicates that the processed products of rice can be consumed directly as ready-to-eat or can be used in preparation of other functional foods to combat malnutrition and build nutritional security. The study indicates that processing could improve the nutritional quality of the rice products.
ABSTRACT
A quick, simple, and reliable isocratic ultra-performance supercritical fluid chromatography-photodiode array detector (UPSFC-DAD) method was developed and validated to determine lycopene in different horticultural products. The effects of stationary phase, co-solvent, pressure, temperature, flow rate, and mobile phase additive on the separation of lycopene were evaluated. The developed method involved BEH-2EP-2.1 × 150 mm, 5 µm as the stationary phase, and CO2/MeOH 85:15 (v/v) with formic acid as the additive at 0.10% as the mobile phase. The column temperature was maintained at 45 °C, ABPR at 1800 psi, and the mobile phase's flow rate was maintained at 1 mL/min. Under the optimized conditions, lycopene was successfully separated within 0.722 ± 0.001 min. The standard curve assayed over a range of 10 to 100 µg/mL resulted in a correlation coefficient of 0.998. The mean recoveries between 97.38% and 102.67% at different spiking levels with RSD < 2.5% were achieved. The intra and inter-day precision expressed as relative standard deviations (RSD) were found to range from 1.27% to 3.28% and from 1.57% to 4.18%, respectively. Robustness in terms of retention time (tR) and RSD were found to be 0.93 ± 0.23 min and less <2.80%, respectively. The limits of detection and quantification were 0.14 µg/mL and 0.37 µg/mL, respectively. This method was successfully applied to determine lycopene extracted from papaya, grapefruit, and bitter melon.
ABSTRACT
In this study, an underutilized citrus family fruit named grapefruit was explored for the extraction of lycopene using supercritical carbon dioxide (CO2) extraction technique. An experimental design was developed using response surface methodology to investigate the effect of supercritical carbon dioxide (CO2) operating parameter viz., pressure, temperature, CO2 flow rate, and extraction time on the extraction yield of lycopene yield from grapefruit. A total of 30 sets of experiments were conducted with six central points. The statistical model indicated that extraction pressure and extraction time individually, and their interaction, significantly affected the lycopene yield. The central composite design showed that the polynomial regression models developed were in agreement with the experimental results, with R2 of 0.9885. The optimum conditions for extraction of lycopene from grapefruit were 305 bar pressure, 35 g/min CO2 flow rate, 135 min of extraction time, and 70 °C temperature.
