Comparison of Bond Strength of Orthodontic Brackets Onto the Tooth Enamel of 120 Freshly Extracted Adult Bovine Medial Lower Incisors Using 4 Adhesives: A Resin-Modified Glass Ionomer Adhesive, a Composite Adhesive, a Liquid Composite Adhesive, and a One-Step Light-Cured Adhesive.

BACKGROUND This study aimed to compare the bond strength of orthodontic brackets onto the tooth enamel of 120 freshly extracted adult bovine medial lower incisors using 4 adhesives: a resin-modified glass ionomer adhesive, a composite adhesive, a liquid composite adhesive, and a one-step light-cured adhesive. MATERIAL AND METHODS The study group (120 freshly extracted bovine medial lower incisors) was divided into equal subgroups depending on the type of adhesive used to fix the brackets to the tooth enamel (n=30), and then according to the observation time (n=10). Orthodontic brackets were fixed onto the tooth enamel for 24 hours (T1), 3 months (T2), and 6 months (T3) using 4 types of adhesives: resin-modified glass ionomer adhesive Fuji Ortho LC, composite adhesive Transbond Plus Light Cure Band, flowable composite adhesive Transbond Supreme Low Viscosity, and a one-step light-cured adhesive GC Ortho Connect. Shear tests and fracture plane analyses were performed. RESULTS Statistically significant differences at time T1 were noted in the comparison of shear stress values when brackets were fixed with GC Ortho Connect adhesive compared to other adhesives (P<0.05), except for the Transbond Plus adhesive (P>0.05). At time T3, significant statistical differences occurred between GC Fuji Ortho LC and the other 3 adhesives (P<0.05). The fracture analysis showed that, regardless of the time function, adhesive-cohesive fractures without damage to the enamel were the most common for all the assessed materials. CONCLUSIONS Of the adhesives evaluated, GC Ortho Connect appears to be the most appropriate choice for bonding orthodontic brackets to the enamel surface.

Comparison of the Effects of Myotherapy in Patients with Myofascial Pain with and without Self-Reported Sleep Bruxism Using The Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) Axis I Questionnaire.

BACKGROUND This study aimed to compare the effects of myotherapy using sublingual relaxation splints and stretching exercises in 110 patients with myofascial pain with and without self-reported sleep bruxism using The Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) Axis I Questionnaire. MATERIAL AND METHODS The study involved 110 patients with myofascial pain. The diagnosis was based on the RDC/TMD questionnaire. The number of painful muscle sites (PMS) and the range of maximum mouth opening (MMO) were assessed 2 times - at the first visit and after 3 months. Then, the influence of possible bruxism on the treatment was assessed. RESULTS The mean age of the patients was 26.8 years (SD 5.4); 89% of the subjects were women; and 60.9% of the patients reported bruxism. Each patient was instructed to perform muscle stretching at the first visit and after 1 week all patients received a sublingual relaxation splint. The number of PMS decreased and the range of MMO increased in both groups after a period of 3 months of treatment (P<0.05). Significant differences were observed in the obtained treatment effects between the patients with and without possible bruxism. CONCLUSIONS This study evaluated the effectiveness of the sublingual relaxation splint and stretching exercises in patients with myofascial pain. Patients at a single center in Poland who reported myofascial pain that was not associated with self-reported sleep bruxism had a significantly better response to myotherapy when compared to patients with self-reported sleep bruxism.

In Vivo Evaluation of Periodontal Phenotypes Using Cone-Beam Computed Tomography, Intraoral Scanning by Computer-Aided Design, and Prosthetic-Driven Implant Planning Technology.

BACKGROUND Two clinical parameters, the gingival thickness (GT) and the width of keratinized tissue (WKT), describe the gingival phenotype, which is defined as the 3-dimensional volume of the gingiva. The periodontal phenotype additionally includes the thickness of the labial plate of the alveolar crest (TLPAC). MATERIAL AND METHODS Thirty patients with healthy periodontium on the upper canines and incisors underwent measurements for crestal, supracrestal, free gingival thickness (FGT), the alveolar crest-gingival margin (AC-GM), alveolar crest-cementoenamel junction distance, and the TLPAC at 2, 4, and 8 mm apically from the edge of the alveolar crest using cone-beam computed tomography (CBCT) with computer-aided design and prosthetic-driven implant planning technology. For each tooth, the gingival and periodontal phenotype was evaluated on the basis of the gingival thickness, width of keratinized tissue (WKT), and TLPAC measurements. Each patient's periodontal phenotype was evaluated according to the coronal width/length ratio of both the upper central incisors. RESULTS The dentogingival units had varying average values for the 3 periodontal phenotypes (thin phenotype: FGT 0.65±0.06 mm, WKT 4.85±1.18 mm, AC-GM 3.17±0.64 mm, TLPAC2 0.66±0.28 mm; medium phenotype: FGT 0.87±0.07 mm, WKT 5.49±1.23 mm, AC-GM 3.36±0.65 mm, TLPAC2 0.76±0.37 mm; and thick phenotype: FGT 1.20 mm, WKT 6.00 mm, AC-GM 3.90 mm, TLPAC2 0.90 mm). Positive correlations were seen among WKT, FGT, AC-GM, and TLPAC2. CONCLUSIONS Positive correlations between the FGT and WKT, and the AC-GM distance confirm that measurements using CBCT with computer-aided design and prosthetic-driven implant planning technology can evaluate the gingival phenotype and TLPAC2 for the periodontal phenotype.

Psychosocial Predictors of Bruxism.

OBJECTIVES: The study aimed to investigate the psychosocial predictors of bruxism. The association of various psychosocial factors such as alexithymia, emotional processing, state and trait anxiety, and stress with awake bruxism was analysed. METHODS: The study involved 52 volunteers diagnosed with awake bruxism. The toolkit that was used included the Toronto Alexithymia Scale (TAS-20), the Emotional Processing Scale (EPS), the Cohen Perceived Stress Scale (PSS-10), and the State- and Trait-Anxiety Inventory (STAI), with independent individual psychological diagnoses being made for every patient. The results were statistically analysed using IBM SPSS Statistics 24. RESULTS: The obtained data clearly show that psychological traits-both permanent dispositions (e.g., state anxiety and alexithymia) and temporary states (e.g., trait anxiety, emotional processing deficits, and psychological stress)-are significant determinants of awake bruxism. The percentage of explained variance indicates the presence of other factors as well. CONCLUSIONS: Psychosocial factors such as state anxiety and trait anxiety, alexithymia, and perceived stress are as important as somatic causes in the occurrence and maintenance of awake bruxism. The profile of the obtained data suggests the possibility of preventing or minimizing the symptoms of awake bruxism through properly constructed psychoprophylactic interactions.

Short Implants and Conventional Implants in The Residual Maxillary Alveolar Ridge: A 36-Month Follow-Up Observation.

BACKGROUND Short dental implants are considered an alternative method of treatment to the maxillary sinus elevation and bone augmentation procedure at the sites of a reduced alveolar ridge height. The aim of the study was to determine the most effective therapeutic approach for a single tooth replacement in a reduced maxillary alveolar crest. MATERIAL AND METHODS We enrolled 30 partially edentulous patients having a residual crestal height of 6 mm and a minimal width of the alveolar ridge of 6-7 mm: 15 patients received regular dental implants (OsseoSpeed™ L11 Ø4 mm and L13 Ø4 mm) and the implantation was preceded by the sinus lift procedure from a lateral window approach with the application of a xenogeneic bone graft, whereas the remaining 15 patients received short implants (OsseoSpeed™ L6 mm Ø4 mm) without the sinus lift and augmentation procedure. All implants were loaded with single non-splinted crowns. Radiological examination (CBCT, RVG) was performed before the surgery and after 36 months. Primary and secondary stabilization with Osstell ISQ® and Periotest® were assessed. RESULTS Good results in primary and secondary stability were achieved in both systems. The marginal bone level (MBL) loss was low (0.22±0.46 mm and 0.34±0.24 mm, for short and conventional implants, respectively). No significant difference in MBL between groups was found. CONCLUSIONS Short implants can be successfully used to support single crowns in the lateral part of the maxilla.

Various cements and their effects on bond strength of zirconia ceramic to enamel and dentin.

Zirconia ceramic disks (Cercon) were fabricated using a computer-aided design/ computer-assisted manufacture system and fitted to hard tooth tissues from freshly extracted bovine mandibular incisors using seven cements (zinc phosphate, zinc polycarboxylate, Eco-Link, Panavia F 2.0, Clearfil SA Cement, MaxCem Elite, and GC Fuji Plus) with various physicochemical and bonding properties. Bond strengths were determined using a universal testing machine (Hounsfield H5KS) with a 5,000-N head and a cutting knife speed of 0.5 mm per minute. The study showed that the strongest bond between zirconia ceramic and hard tooth tissues was obtained with Panavia F 2.0 adhesive cement based on 10 methacryloyloxydecyl dihydrogen phosphate monomer.