Purification of monoclonal antibodies using novel 3D printed ordered stationary phases.

3D printing offers the unprecedented ability to fabricate chromatography stationary phases with bespoke 3D morphology as opposed to traditional packed beds of spherical beads. The restricted range of printable materials compatible with chromatography is considered a setback for its industrial implementation. Recently, we proposed a novel ink that exhibits favourable printing performance (printing time ∼100 mL/h, resolution ∼200 µm) and broadens the possibilities for a range of chromatography applications thanks to its customisable surface chemistry. In this work, this ink was used to fabricate 3D printed ordered columns with 300 µm channels for the capture and polishing of therapeutic monoclonal antibodies. The columns were initially assessed for leachables and extractables, revealing no material propensity for leaching. Columns were then functionalised with protein A and SO3 ligands to obtain affinity and strong cation exchangers, respectively. 3D printed protein A columns showed >85 % IgG recovery from harvested cell culture fluid with purities above 98 %. Column reusability was evaluated over 20 cycles showing unaffected performance. Eluate samples were analysed for co-eluted protein A fragments, host cell protein and aggregates. Results demonstrate excellent HCP clearance (logarithmic reduction value of > 2.5) and protein A leakage in the range of commercial affinity resins (<100 ng/mg). SO3 functionalised columns employed for polishing achieved removal of leaked Protein A (down to 10 ng/mg) to meet regulatory expectations of product purity. This work is the first implementation of 3D printed columns for mAb purification and provides strong evidence for their potential in industrial bioseparations.

Escherichia coli LysU is a potential surrogate for human lysyl tRNA synthetase in interactions with the C-terminal domain of HIV-1 capsid protein.

Human lysyl-tRNA synthetase (hLysRS) is known to interact directly with human immunodeficiency virus type-1 (HIV-1) GagPol polyproteins, and both hLysRS with tRNA(Lys3) are selectively packaged into emerging HIV-1 viral particles. This packaging process appears to be mediated by contact between the motif 1 helix h7 of hLysRS and the C-terminal dimerization domain of the HIV-1 capsid protein (CA) segment of Gag or GagPol. Given similarities between hLysRS and Escherichia coli (E. coli) heat shock protein LysU, we investigate if LysU might be an hLysRS surrogate for interactions with Gag or GagPol proteins. We report on a series of studies involving three CA C-domains: CA(146) (intact domain), CA(151) (truncated domain), and CA(146)-M185A (M185A, CA dimer interface mutant). After confirming that LysU and CA(146) are dimeric whilst CA(151) and M185A remain monomeric, we use glutathione S-transferase (GST) pull-down assays to demonstrate the existence of specific interactions between LysU and all three CA-C domains. By means of (1)H-NMR titration experiments, we estimate K(d) values of 50 µM for the interaction between LysU and CA(146) or >500 µM for interactions between LysU and CA(151) or LysU and M185A. The reason for these binding affinity differences may be that interactions between LysU and CA(146) take place through dimer-dimer interactions resulting in a α(2)ß(2) heterotetramer. LysU/CA-C protein interactions are weaker than those reported between hLysRS and the Gag, CA or CA(146) proteins, and hLysRS/Gag binding interactions have also been suggested to involve only αß heterodimer formation. Nevertheless, we propose that LysU could act as a surrogate for hLysRS with respect to Gag and GagPol polyprotein interactions although arguably not sufficiently for LysU to act as an inhibitor of the HIV-1 life cycle without further adaptation or mutation. Potentially, LysU and/or LysU mutants could represent a new class of anti-HIV-1 therapeutic agent.

Assessing the preferred solution conformation of an interacting sense-antisense (complementary) peptide pair.

Sense peptides and corresponding antisense peptides, are capable of making specific interactions. Such interactions may result from inter-peptide side-chain/side-chain contacts or because peptides adopt mutually complementary three-dimensional shapes. Using a combined (1)H NMR spectroscopy/molecular modeling approach to study the interactions between one sense peptide and its corresponding antisense peptide, data are produced that provide clear support for the former hypothesis.

Identification of a mechanical rheostat in the hydrophobic core of protein L.

The ability of proteins and their complexes to withstand or respond to mechanical stimuli is vital for cells to maintain their structural organisation, to relay external signals and to facilitate unfolding and remodelling. Force spectroscopy using the atomic force microscope allows the behaviour of single protein molecules under an applied extension to be investigated and their mechanical strength to be quantified. protein L, a simple model protein, displays moderate mechanical strength and is thought to unfold by the shearing of two mechanical sub-domains. Here, we investigate the importance of side-chain packing for the mechanical strength of protein L by measuring the mechanical strength of a series of protein L variants containing single conservative hydrophobic volume deletion mutants. Of the five thermodynamically destabilized variants characterised, only one residue (I60 V) close to the interface between two mechanical sub-domains was found to differ in mechanical properties to wild type (Delta F(I60 V-WT)=-36 pN at 447 nm s(-1), Delta x(uI60V-WT)=0.2 nm). Phi-value analysis of the unfolding data revealed a highly native transition state. To test whether the number of hydrophobic contacts across the mechanical interface does affect the mechanical strength of protein L, we measured the mechanical properties of two further variants. protein L L10F, which increases core packing but does not enhance interfacial contacts, increased mechanical strength by 13+/-11 pN at 447 nm s(-1). By contrast, protein L I60F, which increases both core and cross-interface contacts, increased mechanical strength by 72+/-13 pN at 447 nm s(-1). These data suggest a method by which nature can evolve a varied mechanical response from a limited number of topologies and demonstrate a generic but facile method by which the mechanical strength of proteins can be rationally modified.