[Management system and development strategy of quality Chinese medicine].

The development of quality Chinese medicine is an important way to improve the quality of Chinese medicine, and ensure the safety and effectiveness of Chinese medicine. This article systematically elaborates the definition, classification, standard and mana-gement certification strategy of quality Chinese medicine. We present the quality Chinese medicine which is higher quality than that of eligible Chinese medicine based on quality control standards. Quality Chinese medicine is strictly in accordance with management procedures, likely GAP and GMP et al, during the productive process, which quality indicators is higher than that of the current relevant national quality standards, such as Chinese Pharmacopoeia(ChP) et al; its limited indicators such as exogenous pollutants and endogenous toxic substances are lower than that of the current relevant national quality standards, likely ChP et al; meanwhile these Chinese herbal medicine, medicinal pieces, patent medicines, and health products and foods with Chinese medicine raw materials are been certificated by quality Chinese medicine. At the same time, this article systematically expounds the five major management systems of quality Chinese medicine, including technical training management for practitioners, productive process management, standard mana-gement, quality inspection and certification management, and product traceability management. And we put forward strategies to improve the supervision and management system, and promote the standardization and development of quality Chinese medicine by improving the technical management system of quality Chinese medicine, strengthening the quality management system and six sigma(6σ) management in the company. These strategies will provide a reliable basis and effective way to improve the quality of Chinese medicine.

A combined quality evaluation method that integrates chemical constituents, appearance traits and origins of raw Rehmanniae Radix pieces.

The quality control of Chinese herbal medicine is a current challenge for the internationalization of traditional Chinese medicine. Traditional quality evaluation methods lack quantitative analysis, while modern quality evaluation methods ignore the origins and appearance traits. Therefore, an integrated quality evaluation method is urgent in need. Raw Rehmanniae Radix (RRR) is commonly used in Chinese herbal medicine. At present, much attention has been drwan towards its quality control, which however is limited by the existing quality evaluation methods. The present study was designed to establish a comprehensive and practical method for the quality evaluation and control of RRR pieces based on its chemical constituents, appearance traits and origins. Thirty-three batches of RRR pieces were collected from six provinces, while high-performance liquid chromatography (HPLC) was applied to determine the following five constituents, including catalpol, rehmannioside A, rehmannioside D, leonuride and verbascoside in RRR pieces. Their appearance traits were quantitatively observed. Furthermore, correlation analysis, principal components analysis (PCA), cluster analysis and t-test were performed to evaluate the qualities of RRR pieces. These batches of RRR pieces were divided into three categories: samples from Henan province, samples from Shandong and Shanxi provinces, and those from other provinces. Furthermore, the chemical constituents and appearance traits of RRR pieces were significantly different from diverse origins. The combined method of chemical contituents, appearance traits and origins can distinguish RRR pieces with different qualities, which provides basic reference for the quality control of Chinese herbal medicine.

[RAM study on general standard of maximum residue limits for pollution-free traditional Chinese medicine based on Chinese Pharmacopoeia formula].

The excessive pesticide residues and heavy metals in traditional Chinese medicine seriously endanger human health and the sustainable development of Chinese medicine industry. In order to improve the quality of traditional Chinese medicine and establish a general standard for maximum residue limits(MRL) of pesticides in pollution-free traditional Chinese medicine and decoction pieces, and to ensure the safety of clinical medication from its origin, MRLs were calculated based on the formula(MRL=A×W/100M) from Chinese Pharmacopeia, comparing it with the current Chinese and international standards as well as literature review, the RAND/UCLA appropriateness method(RAM) was applied to determine the categories and MRLs of pesticides in pollution-free traditional Chinese medicine and decoction pieces. Two questionnaires were drafted for expert panel and appropriateness analysis was carried out with the 9-point Likert scale to determine the general standard for MRLs of pollution-free traditional Chinese medicine and decoction pieces. The results showed that a total of nine experts from different fields scored the necessity of standard-setting and 206 pesticide residue limits respectively. The appropriateness scores of 206 pesticides were greater than 7, and appropriateness rate was 100%, which signifies that the expert panel has reached consensus. In summary, based on the RAM, the general standard for maximum residue limits of pesticides in pollution-free Chinese medicines and decoction pieces has reached an expert consensus. Comparing with the MRLs of medicinal plants and plant-sourced food from CAC, Europe Union, the United States, South Korea, Japan, Australia, New Zealand and Canada, 206 MRLs from this general standard share 88.8% in common, 4.4% of which is higher and 6.8% lower than those international standards. This has provided a basis for standardizing the use of pesticides in pollution-free traditional Chinese medicine.

[Status and suggestions for adjuvant standard for Chinese materia medica processing in China].

In this paper, the status of adjuvant standard for Chinese materia medica processing in the Chinese Pharmacopoeia 2015 edition, the National Specification of Chinese Materia Medica Processing, and the 29 provincial specification of Chinese materia medica was summarized, and the the status including general requirements, specific requirements, and quality standard in the three grade official specifications was collected and analyzed according to the "medicine-adjuvant homology" and "food-adjuvant homology" features of adjuvants. This paper also introduced the research situation of adjuvant standard for Chinese materia medica processing in China; In addition, analyzed and discussed the problems existing in the standard system of adjuvant for Chinese materia medica processing, such as lack of general requirements, low level of standard, inconsistent standard references, and lack of research on the standard, and provided suggestions for the further establishment of the national standards system of adjuvant for Chinese materia medica processing.

A multiple biomarker assay for quality assessment of botanical drugs using a versatile microfluidic chip.

Quality control is critical for ensuring the safety and effectiveness of drugs. Current quality control method for botanical drugs is mainly based on chemical testing. However, chemical testing alone may not be sufficient as it may not capture all constituents of botanical drugs. Therefore, it is necessary to establish a bioassay correlating with the drug's known mechanism of action to ensure its potency and activity. Herein we developed a multiple biomarker assay to assess the quality of botanicals using microfluidics, where enzyme inhibition was employed to indicate the drug's activity and thereby evaluate biological consistency. This approach was exemplified on QiShenYiQi Pills using thrombin and angiotensin converting enzyme as "quality biomarkers". Our results demonstrated that there existed variations in potency across different batches of the intermediates and preparations. Compared with chromatographic fingerprinting, the bioassay provided better discrimination ability for some abnormal samples. Moreover, the chip could function as "affinity chromatography" to identify bioactive phytochemicals bound to the enzymes. This work proposed a multiple-biomarker strategy for quality assessment of botanical drugs, while demonstrating for the first time the feasibility of microfluidics in this field.

[A strategy of constructing the technological system for quality control of Chinese medicine based on process control and management].

The current situation, bottleneck problems and severe challenges in quality control technology of Chinese Medicine (CM) are briefly described. It is presented to change the phenomenon related to the post-test as the main means and contempt for process control in drug regulation, reverse the situation of neglecting the development of process control and management technology for pharmaceutical manufacture and reconstruct the technological system for quality control of CM products. The regulation and technology system based on process control and management for controlling CM quality should be established to solve weighty realistic problems of CM industry from the root causes, including backwardness of quality control technology, weakness of quality risk control measures, poor reputation of product quality and so on. By this way, the obstacles from poor controllability of CM product quality could be broken. Concentrating on those difficult problems and weak links in the technical field of CM quality control, it is proposed to build CMC (Chemistry, Manufacturing and Controls) regulation for CM products with Chinese characteristics and promote the regulation international recognition as soon as possible. The CMC technical framework, which is clinical efficacy-oriented, manufacturing manner-centered and process control-focused, was designed. To address the clinical characteristics of traditional Chinese medicine (TCM) and the production feature of CM manufacture, it is suggested to establish quality control engineering for CM manufacturing by integrating pharmaceutical analysis, TCM chemistry, TCM pharmacology, pharmaceutical engineering, control engineering, management engineering and other disciplines. Further, a theoretical model of quality control engineering for CM manufacturing and the methodology of digital pharmaceutical engineering are proposed. A technology pathway for promoting CM standard and realizing the strategic goal of CM internationalization is elaborated.

[Transcriptome characterization of Ephedra sinica with 454 ESTs].

Using the latest 454 GS FLX platform and Titanium regent, a substantial expressed sequence tag (ESTs) dataset of Ephedra sinica was produced, and the profile of gene expression and function gene of which were investigated. A total of 48 389 reads with an average length of 373 bp were generated. These 454 reads were assembled into 18 801 unigenes, which were all 454 sequencing identified. A total number of 10 531 unigenes(56.0%) were annotated using BLAST searches (E-value≤1×10⁻5) against the Nr, Nt, TAIR, SwissProt and KEGG databases. With respect to genes related to ephedrine biosynthesis, 19 unigenes(encoding 9 enzymes) were found. A total of 97 putative genes encoding cytochrome P450s were also discovered. Data presented in this study will provide an important resource for the scientific community that is interested in the functional genomics and secondary metabolism of E. sinica.

[The technological innovation strategy for quality control of Chinese medicine based on Big Data].

The evolution of the quality control concepts of medical products within the global context and the development of the quality control technology of Chinese medicine are briefly described. Aimed at the bottlenecks in the regulation and quality control of Chinese medicine, using Big Data technology to address the significant challenges in Chinese medicine industry is proposed. For quality standard refinements and internationalization of Chinese medicine, a technological innovation strategy encompassing its methodology, and the R&D direction of the subsequent core technology are also presented.

[Species study on Chinese medicine leech and discussion on its resource sustainable utilization].

Through systemically sorting and studying literature of Chinese medicine, this article pointed out that leech used by the traditional Chinese medicine in ancient time has the features of small, living in water, able to suck blood of animal and people. The species of leeches having these features were Hirudo nipponia Whitman, H. pulchra Song, Poecilobdella nanjingensis sp. Nov. , P. manillensis (Lesson) and P. hubeiensis Yang, which were not fully coincidence with the species recorded in Chinese Pharmacopeia of 2010 edition. We suggests that species of leech in Chinese Pharmacopeia be revised: H. nipponica Whitman should be kept, P. manillensis (Lesson) should be added in, Whitmania pigra Whitman and W. acranulata Whitma should be temporarily reserved, and H. pulchra Song, P. nanjingensis sp. Nov. , and P. hubeiensis Yang should be considered.

[Principles for molecular identification of traditional Chinese materia medica using DNA barcoding].

Since the research of molecular identification of Chinese Materia Medica (CMM) using DNA barcode is rapidly developing and popularizing, the principle of this method is approved to be listed in the Supplement of the Pharmacopoeia of the People's Republic of China. Based on the study on comprehensive samples, the DNA barcoding systems have been established to identify CMM, i.e. ITS2 as a core barcode and psbA-trnH as a complementary locus for identification of planta medica, and COI as a core barcode and ITS2 as a complementary locus for identification of animal medica. This article introduced the principle of molecular identification of CMM using DNA barcoding and its drafting instructions. Furthermore, its application perspective was discussed.

Simultaneous determination of amlodipine and bisoprolol in rat plasma by a liquid chromatography/tandem mass spectrometry method and its application in pharmacokinetic study.

A sensitive, specific liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was established for the quantitative determination of amlodipine and bisoprolol, using clenbuterol as the internal standard (IS). The analytes and IS were isolated from 100µL plasma samples by a simple liquid-liquid extraction (LLE). Reverse-phase high performance liquid chromatography (RP-HPLC) separation was accomplished on a Diamonsil C(18) column (50mm×4.6mm, 5µm) with a mobile phase composed of methanol-water-formic acid (75:25:0.01, v/v/v) at a flow rate of 0.3mL/min. The method had a chromatographic total run time of 3min. Multiple reacting monitoring (MRM) transitions of m/z [M+H](+) 409.1→237.9 (amlodipine), m/z [M+H](+) 326.2→116.0 (bisoprolol) and m/z [M+H](+) 277.0→203.0 (clenbuterol, IS) were used to quantify amlodipine, bisoprolol and IS, respectively. The method was sensitive with a lower limit of quantitation (LLOQ) of 0.2ng/mL for both amlodipine and bisoprolol, and the linear range was 0.2-50ng/mL for both amlodipine and bisoprolol (r(2)>0.9961). All the validation data, such as accuracy, precision and inter-day repeatability, were within the required limits. The method was successfully applied to pharmacokinetic studies of amlodipine and bisoprolol in Sprague-Dawley (SD) rats.

[Overview on quantitative analysis of multi-components by single-marker].

Based on the previous literatures, the overview on the history and recent advance of the quantitative analysis of multi-components by single-marker (QAMS) was summarized. The key questions of QAMS were also highlighted. It could be considered as a feasible method for the quality control of Traditional Chinese Medicines.

Functional genomics of a living fossil tree, Ginkgo, based on next-generation sequencing technology.

Ginkgo biloba is monotypic species native to China and has old, dioecious, medicinally important characteristics. The functional genes related to these characteristics have not been effectively explored due to a limited number of expressed sequence tags (ESTs) from Ginkgo. To discover novel functional genes efficiently and to understand the development of a living fossil tree, Ginkgo, we used massive parallel pyrosequencing on the Roche 454 GS FLX Titanium platform to generate 64 057 ESTs. The ESTs combined with the 21 590 Ginkgo ESTs in genbank were assembled into 22 304 unique putative transcripts, in which 13 922 novel unique putative transcripts were identified by 454 sequencing. After being assigned to putative functions with Gene Ontology terms, a detailed view of the Ginkgo biological systems was displayed, including characterization of unique putative transcripts with homology to known key enzymes and transcription factors involved in ginkgolide/bilobalide and flavonoid biosynthetic pathways, as well as unique putative transcripts related to development, response to disease and defence. The fact that three full-length Ginkgo genes encoding key enzymes were found and cloned, suggests that high-throughput sequencing technology is superior to traditional gene-by-gene approach in discovery of genes. Additionally, a total of 204 simple sequence repeat motifs were detected. Our study not only lays the foundations for transcriptome-led studies in biosynthetic mechanisms, but also contributes significantly to the understanding of functional genomics and development in non-model plants.

Overview of the quality standard research of traditional Chinese medicine.

Traditional Chinese medicine (TCM) has been widely used for the prevention and treatment of various diseases for a long time in China. Due to its proven efficacy, wide applications, and low side effect, TCM has increasingly attracted worldwide attention. However, one of the biggest challenges facing the clinical practice of TCM is the uncontrollable quality. In this review, the progress of the development and the current status of quality standard as well as new quality control techniques introduced in Chinese Pharmacopoeia (2010 edition), such as liquid chromatography hyphenated mass spectrometry (LC-MS), fingerprint, quantitative analysis of multicomponents by single-marker (QAMS), thin layer chromatography bio-autographic assay (TLC-BAA), and DNA molecular marker technique, are briefly overviewed.

Quantitative determination of 10 phenylpropanoid and lignan compounds in Lancea tibetica by high-performance liquid chromatography with UV detection.

An HPLC method was developed for simultaneous determination of one phenylpropanoid glycoside, verbascoside (1), and nine lignans, including lantibeside (2), phillyrin (3), lantibeside B (4), lantibeside C (5), tibeticoside A (6), styraxjaponoside C (7), sylvatesmin (8), (+)-piperitol (9), and horsfieldin (10), from the Tibetan medicinal plant Lancea tibetica Hook. F. et Thoms. The analysis was performed within 45 min. The extraction method was optimized with different solvent systems. The HPLC method was validated for linearity, repeatability, accuracy, limits of detection, and limits of quantification. The limits of detection and limits of quantification of 10 analytes were found to be less than 0.1 and 0.5 µg/mL, respectively. The RSD for intra- and inter-day analyses was less than 4.2 %, and the recovery efficiency was 90-105 %. The method was used to analyze different populations of L. tibetica collected in China. HPLC profiles showed that the concentrations of analytes were different in samples collected from different areas of China. Verbascoside was the dominant component in three out of five plant samples; compounds 2, 3, 6, and 8 accounted for over 62 % yields in total lignan contents. The method is useful for identification, quality assurance, and quality control of L. tibetica and its related products.

[Suggestions for improving quality control of extrinsic residues in crude drugs].

To improve the impurity control of extrinsic residues in Chinese crude drugs and ensure the quality of crude drugs, relative suggestions should be provided. The present situation of extrinsic residues control in crude drugs was reviewed, and relative problems existed were analyzed. To develop the impurity control of extrinsic residues in Chinese crude drugs, more effort focus on strengthening basic research, improving analytical methods and optimizing the pattern of administration should be made.

[Speed up to formulate "National processing procedures of prepared slices of Chinese crude drugs", unified the national standards of prepared slices].

The prepared slices of Chinese crude drugs are growing important in recent years, and faced with new developments and opportunities. The author analyzed the importance of formulate national processing procedures of prepared slices of Chinese crude drugs combined actual work, proposed the overall objectives and tasks for the formulation, and emphasized to need to correctly deal with several important factors during the process of formulate "National processing procedures of prepared slices of Chinese crude drugs", unified the national standards of prepared slices, solved the real problems that the prepared slices of Chinese crude drugs industry faced.

[Scientific supervision of compound preparation of traditional Chinese medicine and chemical drug].

The application of the compound preparation of traditional Chinese medicine (TCM) and chemical drug in clinical has a long history. Drug regulatory requirements of the compound preparation of TCM and chemical drug in various periods were compared and analyzed, and the history and status of the way of scientific supervision of this preparation were summarized. This paper discussed the problems and deficiencies of the compound preparation of TCM and chemical drug, and put forward countermeasures and suggestions about to strengthen the scientific supervision of the compound preparation of TCM and chemical drug.

[UPLC simultaneous determination of five active components in Cinnamomi Ramulus].

A rapid UPLC method for simultaneous determination of protocatechuic acid, coumarin, cinnamic alcohol, cinnamic acid and cinnamaldehyde in Cinnamomi Ramulus was established. The optimal conditions of separation and detection were achieved on an HSS T3 Column (2.1 mm x 100 mm, 1.8 microm) eluted with a gradient of acetonitrile and 0.05% aqueous phosphoric acid, at a flow rate of 0.5 mL x min(-1), detected at 254 nm. The linear response ranges of protocatechuic acid, coumarin, cinnamic alcohol, cinnamic acid and cinnamaldehyde were 0.359-3.59 mg x L(-1) (r = 0. 999 3), 2. 834-28.34 mg x L(-1) (r = 0.999 8), 0.574-5.74 mg x L(-1) (r = 0.999 8), 2.400-24.00 mg x L(-1) (r = 0.999 9), 32.57-325.7 mg x L(-1) (r = 0.999 8), respectively (n = 6). The mean recoveries (n = 9) of the five components were 96.7%-101.0%, RSD < 2.3%. The assay demonstrates that the method has adequate accuracy and selectivity to measure the concentration of protocatechuic acid, coumarin, cinnamic alcohol, cinnamic acid and cinnamaldehyde in Cinnamomi Ramulus.

[Origin of some medicinal materials from animals in Chinese pharmacopoeia 2010 edition 1].

OBJECTIVE: Enable to make the origin of some medicinal materials from animals-national-standard Chinese Pharmacopoeia subdivision 1 more complete, to protect and utilize the wild medicinal animal resources, and to improve the quality of traditional Chinese medicines materials materials. METHOD: In accordance with author's over two decades of studies in medicinal material from animals and medicinal animals, combining with modern animal classification findings, comparing the contents of medicinal material origin from animals in Pharmacopoeia new edition. RESULT: Give amendment advices on gallnut, concha arcae, zaocys dhumnade, gadfly, and so forth the fifteen kinds of medicinal material origin from animals' taxonomic status, Chinese names and their Latin scientific names. CONCLUSION: The origin of accuracy of medicinal material origin from animals is critical to ensure the quality of traditional Chinese medicine. As a national-level traditional Chinese medicine code of laws, it should advance with times, actively absorb and adopt the latest achievements in scientific research. Meanwhile, modern molecular biology techniques should be used to develop the research of conventional medicinal material origin from animals in a planned and systematic manner.