ABSTRACT
Quasi-two-dimensional (2D) Pb-Sn mixed perovskites show great potential in applications of single and tandem photovoltaic devices, but they suffer from low efficiencies due to the existence of horizontal 2D phases. Here, we obtain a record high efficiency of 18.06% based on 2D ⟨n⟩ = 5 Pb-Sn mixed perovskites (iso-BA2MA4(PbxSn1-x)5I16, x = 0.7), by optimizing the crystal orientation through a regulation of the Pb/Sn ratio. We find that Sn-rich precursors give rise to a mixture of horizontal and vertical 2D phases. Interestingly, increasing the Pb content can not only entirely suppress the unwanted horizontal 2D phase in the film but also enhance the growth of vertical 2D phases, thus significantly improving the device performance and stability. It is suggested that an increase of the Pb content in the Pb-Sn mixed systems facilitates the incorporation of iso-butylammonium (iso-BA+) ligands in vertically oriented perovskites because of the reduced lattice strain and increased interaction between the organic ligands and inorganic framework. Our work sheds light on the optimal conditions for fabricating stable and efficient 2D Pb-Sn mixed perovskite solar cells.
ABSTRACT
The black-to-yellow phase transition in perovskite quantum dots (QDs) is more complex than in bulk perovskites, regarding the role of surface energy. Here, with the assistance of in situ grazing-incidence wide-angle and small-angle X-ray scattering (GIWAXS/GISAXS), distinct phase behaviors of cesium lead iodide (CsPbI3 ) QD films under two different temperature profiles-instant heating-up (IHU) and slow heating-up (SHU) is investigated. The IHU process can cause the phase transition from black phase to yellow phase, while under the SHU process, the majority remains in black phase. Detailed studies and structural refinement analysis reveal that the phase transition is triggered by the removal of surface ligands, which switches the energy landscape. The lattice symmetry determines the transition rate and the coexistence black-to-yellow phase ratio. The SHU process allows longer relaxation time for a more ordered QD packing, which helps sustain the lattice symmetry and stabilizes the black phase. Therefore, one can use the lattice symmetry as a general index to monitor the CsPbI3 QD phase transition and finetune the coexistence black-to-yellow phase ratio for niche applications.
ABSTRACT
Lead-tin mixed perovskites are excellent photovoltaic materials that can be used in single- or multi-junction perovskite solar cells (PSCs). However, most high-performance Pb-Sn mixed PSCs reported to date are still Pb-dominant. It is highly demanding to develop environmentally friendly low-lead PSCs, but the poor film quality caused by the uncontrollable crystallization kinetics has been hindering the efficiency improvement of low-lead PSCs. Here, a vacuum-drying strategy in the two-step method to fabricate low-lead PSCs (FAPb0.3 Sn0.7 I3 ) with an impressive efficiency of 19.67% is employed. The vacuum treatment induces the formation of low crystalline Pb0.3 Sn0.7 I2 films containing less solvent, thus facilitating the subsequent FAI penetration and suppressing pinholes. Compared with the conventional one-step method, the two-step fabricated low-lead perovskite films with the vacuum-drying treatment exhibit a larger grain size, lower trap density, and weaker recombination loss, thus giving rise to a record-high efficiency near 20% with better thermal stability.
ABSTRACT
Organic A'-site ligand structure plays a crucial role in the crystal growth of 2D perovskites, but the underlying mechanism has not been adequately understood. This problem is tackled by studying the influence of two isomeric A'-site ligands, linear-shaped n-butylammonium (n-BA+ ) and branched iso-butylammonium (iso-BA+ ), on 2D perovskites from precursor to device, with a combination of in situ grazing-incidence wide-angle X-ray scattering and density functional theory. It is found that branched iso-BA+ , due to the lower aggregation enthalpies, tends to form large-size clusters in the precursor solution, which can act as pre-nucleation sites to expedite the crystallization of vertically oriented 2D perovskites. Furthermore, iso-BA+ is less likely to be incorporated into the MAPbI3 lattice than n-BA+ , suppressing the formation of unwanted multi-oriented perovskites. These findings well explain the better device performance of 2D perovskite solar cells based on iso-BA+ and elucidate the fundamental mechanism of ligand structural impact on 2D perovskite crystallization.
ABSTRACT
2D-3D mixed tin halide perovskites are outstanding candidate materials for lead-free perovskite solar cells (PSCs) due to their improved stability and decreased trap density in comparison with their pure 3D counterparts. However, the mixture of multiple phases may lead to poor charge transfer across the films and limit the device efficiency. Here, a stacked quasi-2D (down)-3D (top) double-layered structure in perovskite films prepared via vacuum treatment is demonstrated, which can result in a planar bilayer heterojunction. In addition, it is found that the introduction of guanidinium thiocyanate (GuaSCN) additive can improve the crystallinity and carrier mobility in the 2D perovskite layer and passivate defects in the whole film, leading to a long carrier lifetime (>140 ns) in photoluminescence measurements. As a result, the PSCs show a high open circuit voltage (VOC ) up to 1.01 V with a voltage loss of only 0.39 V, which represents the record values ever reported for tin-based PSCs. The champion device exhibits a power conversion efficiency (PCE) of 13.79% with decent stability, retaining 90% of the initial PCE for 1200 h storage in N2 -filled glovebox.
ABSTRACT
Highly crystalline perovskite films with large grains and few grain boundaries are conducive for efficient and stable perovskite solar cells. Current methods for preparing perovskite films are mostly based on a fast crystallization process, with rapid nucleation and insufficient growth. In this study, MAPbI3 perovskite with inhibited nucleation and promoted growth in the TiO2/ZrO2/carbon triple mesoscopic scaffold was crystallized by modulating the precursor and the crystallization process. N-methylformamide showed high solubility for both methylammonium iodide and PbI2 and hampered the formation of large colloids in the MAPbI3 precursor solution. Furthermore, methylammonium chloride was added to reduce large colloids, which are a possible source of nucleation sites. During the crystallization of MAPbI3, the solvent was removed at a slow controlled speed, to avoid rapid nucleation and provide sufficient time for crystal growth. As a result, highly oriented MAPbI3 crystals with suppressed non-radiative recombination and promoted charge transport were obtained in the triple mesoscopic layer with disordered pores. The corresponding hole-conductor-free, printable mesoscopic perovskite solar cells exhibited a highest power conversion efficiency of 18.82%. The device also exhibited promising long-term operational stability of 1000 h under continuous illumination at maximum power point at 55 ± 5 °C and damp-heat stability of 1340 h aging at 85 °C as well as 85% relative humidity.
ABSTRACT
Applying extensively excess ammonium halides in forming perovskites is a widely used approach to achieve high-performance perovskite light-emitting diodes (PeLEDs). However, most of these PeLEDs suffer from severe external quantum efficiency (EQE) roll-off at high current densities, thereby restricting the realization of high-brightness PeLEDs and laser diodes. In this work, we explore the underlying mechanism of the EQE roll-off in high-efficiency formamidinium lead iodide (FAPbI3)-based PeLEDs. By combining voltage-dependent electrical stress measurements and ex situ ion distribution analysis of PeLEDs, we found that the electric field-driven migration and local segregation of excess iodide ions, originated from nonstoichiometric precursors, trigger the EQE roll-off via promoting imbalanced charge injection. Based on this discovery, we introduced a simple wash-off treatment with chloroform to remove the excess iodides from the perovskite surface and demonstrated that the treatment is highly effective in suppressing the roll-off behavior. By combining the treatment and the use of an ultrathin poly(methyl methacrylate) (PMMA) interlayer, we achieved a high-brightness PeLED with an EQEmax of 19.6%, a critical current density of 1550 mA cm-2, and a radiancemax of 875 W sr-1 m-2. The study reveals the double-edge sword effect of precursor nonstoichiometry and highlights the importance of managing excess ions in perovskite films.
ABSTRACT
While there has been extensive investigation into modulating quasi-2D perovskite compositions in light-emitting diodes (LEDs) for promoting their electroluminescence, very few reports have studied approaches involving enhancement of the energy transfer between quasi-2D perovskite layers of the film, which plays very important role for achieving high-performance perovskite LEDs (PeLEDs). In this work, a bifunctional ligand of 4-(2-aminoethyl)benzoic acid (ABA) cation is strategically introduced into the perovskite to diminish the weak van der Waals gap between individual perovskite layers for promoting coupled quasi-2D perovskite layers. In particular, the strengthened interaction between coupled quasi-2D perovskite layers favors an efficient energy transfer in the perovskite films. The introduced ABA can also simultaneously passivate the perovskite defects by reducing metallic Pb for less nonradiative recombination loss. Benefiting from the advanced properties of ABA incorporated perovskites, highly efficient blue PeLEDs with external quantum efficiency of 10.11% and a very long operational stability of 81.3 min, among the best performing blue quasi-2D PeLEDs, are achieved. Consequently, this work contributes an effective approach for high-performance and stable blue PeLEDs toward practical applications.
ABSTRACT
The crystalline orientation and phase distribution are two important parameters for high-performance 2D perovskite solar cells. Therefore, it is essential to understand how the structure of spacer ligands influences the orientation and phase distribution of resulting 2D perovskite films. In this work, a new member of Dion-Jacobson (DJ) phase 2D perovskites based on trans-1,4-cyclohexanediamine (CHDA) is demonstrated and it is found that the crystalline orientation is self-aligned spontaneously, which is different from the well-known graded distribution in controlled sample with its isomer 1,6-diaminohexane (HDA) as spacer ligand. Grazing incident X-ray scattering suggests that the exact alignment is strongly slantwise to the substrate while it is still beneficial for charge transfer along the vertical structure of devices. The devices can achieve high efficiency up to 15.01% for (CHDA)MA3 Pb4 I13 (n = 4), one of the highest efficiencies reported by now. The encapsulated (CHDA)MA3 Pb4 I13 (n = 4) devices can retain 80.7% efficiency for 270 min under continuous maximum power point tracking. (CHDA)MA3 Pb4 I13 (n = 4) devices can retain 96.5% efficiency under 60 °C and 74.4% efficiency under 70 °C heating for 68 h. The results demonstrate the slantwise aligned DJ phase perovskite solar cells with excellent stability.
ABSTRACT
Two-step-fabricated FAPbI3 -based perovskites have attracted increasing attention because of their excellent film quality and reproducibility. However, the underlying film formation mechanism remains mysterious. Here, the crystallization kinetics of a benchmark FAPbI3 -based perovskite film with sequential A-site doping of Cs+ and GA+ is revealed by in situ X-ray scattering and first-principles calculations. Incorporating Cs+ in the first step induces an alternative pathway from δ-CsPbI3 to perovskite α-phase, which is energetically more favorable than the conventional pathways from PbI2 . However, pinholes are formed due to the nonuniform nucleation with sparse δ-CsPbI3 crystals. Fortunately, incorporating GA+ in the second step can not only promote the phase transition from δ-CsPbI3 to the perovskite α-phase, but also eliminate pinholes via Ostwald ripening and enhanced grain boundary migration, thus boosting efficiencies of perovskite solar cells over 23%. This work demonstrates the unprecedented advantage of the two-step process over the one-step process, allowing a precise control of the perovskite crystallization kinetics by decoupling the crystal nucleation and growth process.
ABSTRACT
3D hierarchical cobalt hydroxide carbonate hydrate (Co(CO3)0.5(OH)·0.11H2O) has been synthesized featuring a hollow urchin-like structure by a one-step hydrothermal method at modest temperature on FTO glass substrates. The functionalities of precursor surfactants were isolated and analyzed. A plausible formation mechanism of the spherical urchin-like microclusters has been furnished through time-dependent investigations. Introduction of other transitional metal doping (Cu, Ni) would give rise to a substantial morphological change associated with a surface area drop. The directly grown cobalt-based hydroxide composite electrodes were found to be capable of catalyzing oxygen evolution reaction (OER) under both neutral pH and alkaline conditions. The favorable 3D dendritic morphology and porous structure provide large surface areas and possible defect sites that are likely responsible for their robust electrochemical activity.
Subject(s)
Cobalt/chemistry , Hydroxides/chemistry , Microspheres , Water/chemistry , Electrochemical Techniques , Hydrogen-Ion Concentration , Nanostructures/chemistry , Oxidation-ReductionABSTRACT
Hierarchical Au-Co(OH)2 microclusters have been synthesized by a facile ethanol-assisted hydrothermal method on FTO glass substrates. The as-fabricated Au-Co(OH)2 forms a typical wreath-shaped structure on a nanosheet with an urchin-like Au-Co(OH)2 structure located in the centre surrounded by densely grown Co(OH)2 nanoarrays. Morphological evolution of the Au-Co(OH)2 microclusters through intermediate steps could be identified by varying the reaction time. The incorporated electronegative Au may be responsible for the decrease of binding energy of Au-Co(OH)2 compared to Co(OH)2. The Au-Co(OH)2 electrode was found to be a promising catalyst for the oxygen evolution reaction (OER) in neutral pH solutions, with a larger roughness factor, lower OER onset and much higher current density than a Co(OH)2 electrode. The improvement of the OER activity of Au-Co(OH)2 microclusters may be due to their large surface area provided by the 3D network of microclusters, and the incorporation of Au as an electron sink to facilitate the oxidation of Co(II) and Co(III) to Co(IV).