ABSTRACT
Metal phosphides with easy synthesis, controllable morphology, and high capacity are considered as potential anodes for sodium-ion batteries (SIBs). However, the inherent shortcomings of metal phosphating materials, such as conductivity, kinetics, volume strain, etc are not satisfactory, which hinders their large-scale application. Here, a CoP@carbon nanofibers-composite containing rich CoâNâC heterointerface and phosphorus vacancies grown on carbon cloth (CoP1-x@MEC) is synthesized as SIB anode to accomplish extraordinary capacity and ultra-long cycle life. The hybrid composite nanoreactor effectively impregnates defective CoP as active reaction center while offering CoâNâC layer to buffer the volume expansion during charge-discharge process. These vast active interfaces, favored electrolyte infiltration, and a well-structured ion-electron transport network synergistically improve Na+ storage and electrode kinetics. By virtue of these superiorities, CoP1-x@MEC binder-free anode delivers superb SIBs performance including a high areal capacity (2.47 mAh cm-2@0.2 mA cm-2), high rate capability (0.443 mAh cm-2@6 mA cm-2), and long cycling stability (300 cycles without decay), thus holding great promise for inexpensive binder-free anode-based SIBs for practical applications.
ABSTRACT
High-voltage LiNi0.5Mn1.5O4 (LNMO) is one of the most promising cathode candidates for rechargeable lithium-ion batteries (LIBs) but suffers from deteriorated cycling stability due to severe interfacial side reactions and manganese dissolution. Herein, a micro-nano porous spherical LNMO cathode was designed for high-performance LIBs. The disordered structure and the preferred exposure of the {111} facets can be controlled by the release of lattice oxygen in the high-temperature calcination process. The unique configuration of this material could enhance the structural stability and play a crucial role in inhibiting manganese dissolution, promoting the rapid transport of Li+, and reducing the volume strain during the charge/discharge process. The designed cathode exhibits a remarkable discharge capacity of 136.7 mA h g-1 at 0.5C, corresponding to an energy density of up to 636.4 W h kg-1, unprecedented cycling stability (capacity retention of 90.6% after 500 cycles) and superior rate capability (78.9% of initial capacity at 10C). The structurally controllable preparation strategy demonstrated in this work provides new insights into the structural design of cathode materials for LIBs.
ABSTRACT
Layered transition metal oxides (NaxTMO2) possess attractive features such as large specific capacity, high ionic conductivity, and a scalable synthesis process, making them a promising cathode candidate for sodium-ion batteries (SIBs). However, NaxTMO2 suffer from multiple phase transitions and Na+/vacancy ordering upon Na+ insertion/extraction, which is detrimental to their electrochemical performance. Herein, we developed a novel cathode material that exhibits an abnormal P2-type structure at a stoichiometric content of Na up to 1. The cathode material delivers a reversible capacity of 108 mA h g-1 at 0.2C and 97 mA h g-1 at 2C, retaining a capacity retention of 76.15% after 200 cycles within 2.0-4.3 V. In situ diffraction studies demonstrated that this material exhibits an absolute solid-solution reaction with a low volume change of 0.8% during cycling. This near-zero-strain characteristic enables a highly stabilized crystal structure for Na+ storage, contributing to a significant improvement in battery performance. Overall, this work presents a simple yet effective approach to realizing high Na content in P2-type layered oxides, offering new opportunities for high-performance SIB cathode materials.
ABSTRACT
Intragranular cracking within the material structure of Ni-rich (LiNixCoyMn1 - x - y, x ≥0.9) cathodes greatly threatens cathode integrity and causes capacity degradation, yet its atomic-scale incubation mechanism is not completely elucidated. Notably, the physicochemical properties of component elements fundamentally determine the material structure of cathodes. Herein, a diffusion-controlled incubation mechanism of intragranular cracking is unraveled, and an underlying correlation model with Co element is established. Multi-dimensional analysis reveals that oxygen vacancies appear due to the charge compensation from highly oxidizing Co ions in the deeply charged state, driving the transition metal migration to Li layer and layered to rock-salt phase transition. The local accumulation of two accompanying tensile strains collaborates to promote the nucleation and growth of intragranular cracks along the fragile rock-salt phase domain on (003) plane. This study focuses on the potential risks posed by Co to the architectural and thermal stability of Ni-rich cathodes and is dedicated to the compositional design and performance optimization of Ni-rich cathodes.
ABSTRACT
Li- and Mn-rich layered oxides (LMLOs) are regarded as the most promising cathode materials for Li-ion batteries (LIBs), but they suffer from poor rate capability. Herein, a promising and practical method (i.e. a hydroxide coprecipitation method in combination with a microwave heating process) is developed to controllably synthesize cobalt-free Li[Li0.2Ni0.2Mn0.6]O2 with a layered/spinel heterostructure (LLNMO-LS). The cathode made of the LLNMO-LS delivers an excellent electrochemical performance, demonstrating a discharge capacity of 147 mA h g-1 at 10C.
ABSTRACT
Li-rich cathode materials have emerged as one of the most prospective options for Li-ion batteries owing to their remarkable energy density (>900 Wh kg-1). However, voltage hysteresis during charge and discharge process lowers the energy conversion efficiency, which hinders their application in practical devices. Herein, the fundamental reason for voltage hysteresis through investigating the O redox behavior under different (de)lithiation states is unveiled and it is successfully addressed by formulating the local environment of O2-. In Li-rich Mn-based materials, it is confirmed that there exists reaction activity of oxygen ions at low discharge voltage (<3.6 V) in the presence of TM-TM-Li ordered arrangement, generating massive amount of voltage hysteresis and resulting in a decreased energy efficiency (80.95%). Moreover, in the case where Li 2b sites are numerously occupied by TM ions, the local environment of O2- evolves, the reactivity of oxygen ions at low voltage is significantly inhibited, thus giving rise to the large energy conversion efficiency (89.07%). This study reveals the structure-activity relationship between the local environment around O2- and voltage hysteresis, which provides guidance in designing next-generation high-performance cathode materials.
ABSTRACT
Ni-rich cathodes with a radial ordered microstructure have been proved to enhance materials' structural stability. However, the construction process of radial structures has not yet been clearly elaborated. Herein, the formation process of radial structures induced by different doped elements has been systematically investigated. The advanced Electron Back Scatter Diffraction (EBSD) characterization reveals that W-doped materials are more likely to form a low-angle arrangement between crystal planes of the primary particles and exhibit twin growth during sintering than a B-doped cathode. The corresponding High Angle Annular Dark Field-Scanning Transmission Electron Microscopy (HAADF-STEM) analysis further proves that the twin growth induced by W doping can promote the migration of Li+. Simultaneously, the W-doped sample reduces the (003) plane surface energy and promotes the retention of the crystal plane, which can effectively alleviate the structural degradation caused by Li+ (de)intercalation. At a cut-off voltage of 4.6 V, the W-doped cathode displays a capacity retention rate of 94.1% after 200 cycles at 1C. This work unveils the influence of different element doping on the structure from the perspective of crystal plane orientation within primary particles and points out the importance of the exposure and orientation of the crystal plane of the particles.
ABSTRACT
Nickel-rich layered oxides are promising cathodes in commercial materials for lithium-ion batteries. However, the increase of the nickel content leads to the decay of cyclic performance and thermal stability. Herein, in situ surface-fluorinated W-doping LiNi0.90Co0.05Mn0.05O2 cathodes enhance integral lithium-ion migration (transfer in bulk and diffusion in the interface) kinetics by synergistically solving the problems of bulk and interface structural degradation. Owing to the introduction of tungsten, the growth of primary particles is regulated toward the (003) crystal plane and with the acicular structure, which further stabilizes the bulk structure during cycling. Moreover, the LiF coating layer on the cathode/electrolyte interface physically isolates the attack of the electrolyte on the surface cathodes and accelerates the lithium-ion diffusion rate, ultimately ameliorating the interfacial dynamics and structural stability. Dual-modified LiNi0.90Co0.05Mn0.05O2 exhibits superior electrochemical properties, especially more remarkable cyclic retention (88.16% vs 70.44%) after 100 cycles at 1 C and more outstanding high current rate properties (173.31 mAh·g-1 vs 135.97 mAh·g-1) at 5 C than the pristine one. This work emphasizes the probability of an integrated optimization strategy for Ni-rich materials, which provides an innovative idea for ameliorating (bulk and interfacial) structure degradation and promoting the diffusion of lithium ions during cycling.
ABSTRACT
Li-rich layered materials have attracted much attention for their large capacity (>250 mA h g-1) stemming from anion redox at high voltage. However, inherent problems, such as capacity decay and voltage decay/hysteresis during cycling, hinder their commercial progress. In this work, an oxygen vacancy-accompanied spinel interface layer is constructed by gas-solid reaction via NiCO3 treatment at 650 °C, which reduces the asymmetry of anion redox and improves structural stability. Therefore, a 1 mol% NiCO3-modified sample powerfully reduces the voltage hysteresis (â¼0.23 V) in the first cycle, simultaneously exhibiting an excellent discharge capacity of 275 mA h g-1 at 0.1 C with a capacity retention of 90% for 200 cycles at 1 C.
ABSTRACT
Li-rich Mn-based oxides are regarded as the most promising new-generation cathode materials, but their practical application is greatly hindered by structure collapse and capacity degradation. Herein, a rock salt phase is epitaxially constructed on the surface of Li-rich Mn-based cathodes through Mo doping to improve their structural stability. The heterogeneous structure composed of a rock salt phase and layered phase is induced by Mo6+ enriched on the particle surface, and the strong Mo-O bonding can enhance the TM-O covalence. Therefore, it can stabilize lattice oxygen and inhibit the side reaction of the interface and structural phase transition. The discharge capacity of 2% Mo-doped samples (Mo 2%) displays 279.67 mA h g-1 at 0.1 C (vs 254.39 mA h g-1 (pristine)), and the discharge capacity retention rate of Mo 2% is 79.4% after 300 cycles at 5 C (vs 47.6% (pristine)).
ABSTRACT
Interface fusion plays a key role in constructing Ni-based single-crystal cathodes, and is governed by the atomic migration related to kinetics. However, the interfacial atom migration path and its control factors are lack of clearly understanding. Herein, we systematically probe the solid-state synthesis mechanism of single-crystal LiNi0.92 Co0.04 Mn0.04 O2 , including the effects of precursor size, Li/transition metal (TM) ratio and sintering temperature on the structure. Multi-dimensional analysis unravels that thermodynamics drives interface atoms migration through intermediate state (i.e., cation mixing phase) to induce grain boundary fusion. Moreover, we demonstrate that smaller precursor size (<6â µm), lager Li/TM ratio (>1.0) and higher temperature (≥810 °C) are conducive to promote the growth of the intermediate state due to reaction kinetics enhancement, and ultimately strengthen the atomic migration-induced interface fusion.
ABSTRACT
Ultrahigh Ni-rich quaternary layered oxides LiNi1-x-y-zCoxMnyAlzO2 (1 - x - y - z ≥ 0.9) are regarded as some of the most promising cathode candidates for lithium-ion batteries (LIBs) because of their high energy density and low cost. However, poor rate capacity and cycling performance severely limit their further commercial applications. Herein, an in situ coating strategy is developed to construct a uniform LiAlO2 layer. The NH4HCO3 solution is added to a NaAlO2 solution to form a weak alkaline condition, which can reduce the hydrolysis rate of NaAlO2, thus enabling uniform deposition of Al(OH)3 on the surface of a Ni0.9Co0.07Mn0.01Al0.02(OH)2 (NCMA) precursor. The LiAlO2-coated samples show enhanced cycling stability and rate capacity. The capacity retention of NCMA increases from 70.7% to 88.3% after 100 cycles at 1 C with an optimized LiAlO2 coating amount of 3 wt %. Moreover, the 3 wt % LiAlO2-coated sample also delivers a better rate capacity of 162 mAh g-1 at 5 C, while that of an uncoated sample is only 144 mAh g-1. Such a large improvement of the electrochemical performance should be attributed to the fact that a uniform LiAlO2 coating relieves harmful interfacial parasitic reactions and stabilizes the interface structure. Therefore, this in situ coating approach is a viable idea for the design of higher-energy-density cathode materials.
ABSTRACT
Nickel-rich layered oxides have been regarded as a potential cathode material for high-energy-density lithium-ion batteries because of the high specific capacity and low cost. However, the rapid capacity fading due to interfacial side reactions and bulk structural degradation seriously encumbers its commercialization. Herein, a highly stable hybrid surface architecture, which integrates an outer coating layer of TiO2&Li2TiO3 and a surficial titanium doping by incorporated Ti2O3, is carefully designed to enhance the structural stability and eliminate lithium impurity. Meanwhile, the surficial titanium doping induces a nanoscale cation-mixing layer, which suppresses transition-metal-ion migration and ameliorates the reversibility of the H2 â H3 phase transition. Also, the Li2TiO3 coating layer with three-dimensional channels promotes ion transportation. Moreover, the electrochemically stable TiO2 coating layer restrains side reactions and reinforces interfacial stability. With the collaboration of titanium doping and TiO2&Li2TiO3 hybrid coating, the sample with 1 mol % modified achieves a capacity retention of 93.02% after 100 cycles with a voltage decay of only 0.03 V and up to 84.62% at a high voltage of 3.0-4.5 V. Furthermore, the ordered occupation of Ni ions in the Li layer boosts the thermal stability by procrastinating the layered-to-rock salt phase transition. This work provides a straightforward and economical modification strategy for boosting the structural and thermal stability of nickel-rich cathode materials.
ABSTRACT
Li-rich Mn-based cathodes have attracted much attention due to their high capacity stemming from anion redox above 4.5 V. However, the continuous activation of Li2MnO3 in Li-rich Mn-based materials, which correlates with O2 release and TM migration, is usually unfavorable to structural stability. Herein, based on a gas-solid interface reaction, we tackle this continuous activation phenomenon by restricting the capacity release of Li2MnO3 via NH4HCO3 treatment in the Li1.2Ni0.36Mn0.44O2 cathode. After modification, oxygen vacancies associated with the spinel phase are introduced on the surface. The 4 mol % NH4HCO3-modified material's capacity starts at 182 mAh g-1 at 1 C instead of increasing from 173 to 186 mAh g-1 for 25 cycles in the pristine material. Meanwhile, it also exhibits an excellent capacity retention of 93.24% after 200 cycles (at 1 C), with a small voltage decay rate of 1.19 mV cycle-1.
ABSTRACT
The use of citric acid (CA) chelator to facilitate metal bioavailability is a promising approach for the phytoextraction of heavy metal contaminants. However, the role of the CA chelator associated with arbuscular mycorrhizal fungi (AMF) inoculation on phytoextraction of vanadium (V) has not been studied. Therefore, in this study, a greenhouse pot experiment was conducted to evaluate the combined effect of CA chelator and AMF inoculation on growth performance and V phytoextraction of plants in V-contaminated soil. The experiment was performed via CA (at 0, 5, and 10 mM kg-1 soil levels) application alone or in combination with AMF inoculation by Medicago sativa Linn. (M. sativa). Plant biomass, root mycorrhizal colonization, P and V accumulation, antioxidant enzyme activity in plants, and soil chemical speciation of V were evaluated. Results depicted (1) a marked decline in plant biomass and root mycorrhizal colonization in 5- and 10-mM CA treatments which were accompanied by a significant increased V accumulation in plant tissues. The effects could be attributed to the enhanced acid-soluble V fraction transferring from the reducible fraction. (2) The presence of CA significantly enhanced P acquisition while the P/V concentration ratio in plant shoots and roots decreased, owing to the increased V translocation from soil to plant. (3) In both CA-treated soil, AMF-plant symbiosis significantly improved dry weight (31.4-73.3%) and P content (37.3-122.5%) in shoots and roots of M. sativa. The combined treatments also showed markedly contribution in reduction of malondialdehyde (MDA) content (12.8-16.2%) and higher antioxidants (SOD, POD, and CAT) activities in the leaves. This suggests their combination could promote growth performance and stimulate antioxidant response to alleviate V stress induced by CA chelator. (4) Taken together, 10 mM kg-1 CA application and AMF inoculation combination exhibited a higher amount of extracted V both in plant shoots and roots. Thus, citric acid-AMF-plant symbiosis provides a novel remediation strategy for in situ V phytoextraction by M. sativa in V-contaminated soil.
Subject(s)
Mycorrhizae , Soil Pollutants , Biodegradation, Environmental , Citric Acid , Medicago sativa , Mycorrhizae/chemistry , Plant Roots/chemistry , Soil , Soil Pollutants/analysis , VanadiumABSTRACT
The remediation of uranium (U) through phosphate-solubilizing bacteria (PSB) is an emerging technique as well as an interesting phenomenon for transforming mobile U into stable minerals in the environment. While studies are well needed for in-depth understanding of the mechanism of U(VI) immobilization by PSB. In this study, two PSB were isolated from a U-tailing repository site. These bacterial strains (ZJ-1 and ZJ-3) were identified as Bacillus spp. by the sequence analysis of 16S ribosomal RNA (rRNA) genes. Incubation of PSB in liquid medium showed that the isolate ZJ-3 could solubilize more than 230 mg L-1 P from glycerol-3-phosphate and simultaneously removed over 70% of 50 mg L-1 U(VI) within 1 h. During this process, the rapid appearance of yellow precipitates was observed. The microscopic and spectroscopic analysis demonstrated that the precipitates were associated with U-phosphate compound in the form of saleeite-like substances. Besides, scanning electron microscopy coupled with energy-dispersive X-ray (SEM-EDS) and Fourier transform infrared spectroscopy (FTIR) analysis of the precipitates confirmed that the extracellular polymeric substances (EPS) might also play a key role in U sequestration. Furthermore, SEM and FTIR analysis revealed that part of U(VI) was adsorbed on the bacterial surface through cellular phosphate, hydroxy, carboxyl, and amide groups. This study provides new insights into the synergistic strategies enhancing U immobilization rates by Bacillus spp. that uses glycerol-3-phosphate as the phosphorus source, the process of which contributes to harmful pollutant biodegradation.
ABSTRACT
The accumulation of antimony (Sb) by rice is a severe threat to exposed populations. Previous studies demonstrated that, compared to flooded (anaerobic) water management, dry cultivation management (aerobic) could substantially decrease As, an analog of Sb, uptake by rice. However, the effects of different water management strategies on the accumulation of Sb by rice are less understood. It is proposed that microorganisms play an important role in regulating Sb mobility in rice paddies. Hence, the current study compared the microbial communities in rice paddies receiving different water management, i.e., flooded (anaerobic) and dry (aerobic)) rice cultivation. Significant decrease in Sb uptake by rice, in both the roots and grains, was observed under the aerobic compared to the anaerobic conditions. This could partially be attributed to the differences in the microbial communities as shaped by the redox environment. In aerobic soils, the gene responsible for Sb oxidation (i.e., aioA) was significantly, while in anaerobic soils the gene responsible for Sb reduction (i.e., arrA) was enriched, suggesting that variation in redox conditions may trigger different microbial responses. Accordingly, geochemical analysis indicated that accumulation of Sb(III) was only observed under anaerobic conditions, but not under aerobic conditions. The environment-microbe interactions were distinct between the two treatments with a greater number of interactions between Sb fractions and the microbial assemblage under anaerobic conditions, while Eh was the most influential geochemical parameter under aerobic conditions. Finally, the presence of a core microbiome under the two conditions suggested the possibility of microorganisms that support rice growth, nutrition, and health. The reduction of Sb in rice grain significantly decreases Sb exposure to the residents in Sb contaminated regions, and should be considered for future rice cultivation practices.
Subject(s)
Arsenic , Microbiota , Oryza , Soil Pollutants , Anaerobiosis , Antimony/analysis , Arsenic/analysis , Environmental Monitoring , Soil , Soil Microbiology , Soil Pollutants/analysisABSTRACT
River ecosystems are the most important resource of surface freshwater, but they have frequently been contaminated by excessive nutrient input of nitrogen (N) and phosphorus (P) in particular. An efficient and economic river water treatment technology that possesses the capacity of simultaneous N and P removal is urgently required. In this study, a solar-driven, self-sustainable electrolytic treatment was conducted in situ to intensify N and P removal from eutrophic river water. Solar panel was applied to provide the electrolysis setups with energy (voltage 10 ± 0.5 V), and the current density was controlled to be 0.06 ± 0.02 mA cm-2. Results indicated that the average removal efficiencies of total N (TN) and total P (TP) under electrolysis conditions reached 72.4 ± 11.7 and 13.8 ± 5.3 mg m-2 d-1, which were 3.7- and 4.7-fold higher compared to untreated conditions. Enhanced TN removal mainly reflected the abatement of nitrate N (NO3--N) (80.6 ± 4.1%). The formation of ferric ions through the electro-dissolution of the sacrificial iron anode improved TP removal by coprecipitation with SPS. Combined high-throughput sequencing and statistical analyses revealed that electrolysis significantly reshaped the microbial communities in both the sediment-water interface and suspended sediment (SPS), and hydrogenotrophic denitrifiers (e.g., Hydrogenophaga) were highly enriched under electrolysis conditions. These findings indicated that in situ electrolysis is a feasible and effective technology for intensified nutrient removal from river water.
Subject(s)
Microbiota , Waste Disposal, Fluid , Electrolysis , Fresh Water , Nitrogen , Nutrients , Phosphorus , Rivers , WaterABSTRACT
Nickel-rich layered transition metal oxides are considered as promising cathode candidates to construct next-generation lithium-ion batteries to satisfy the demands of electrical vehicles, because of the high energy density, low cost, and environment friendliness. However, some problems related to rate capability, structure stability, and safety still hamper their commercial application. In this Review, beginning with the relationships between the physicochemical properties and electrochemical performance, the underlying mechanisms of the capacity/voltage fade and the unstable structure of Ni-rich cathodes are deeply analyzed. Furthermore, the recent research progress of Ni-rich oxide cathode materials through element doping, surface modification, and structure tuning are summarized. Finally, this review concludes by discussing new insights to expand the field of Ni-rich oxides and promote practical applications.
ABSTRACT
Mining activities of antimony (Sb) and arsenic (As) typically result in severe environmental contamination. These contaminants accumulate in rice and thus threaten the health of local residents, who consume Sb- and As-enriched rice grains. Microorganisms play a critical role in the transformation and transportation of Sb and As in paddy soil. Thus, an understanding of the microbiology of contaminated sites would promote the production of safe agricultural products. In this study, six Sb- and As-contaminated rice fields near an active Sb-mining area were investigated. The Sb and As concentrations of all samples were elevated compared to the background level in China. Nitrate, total As, total Sb, and Fe(III) were the major determinants of the microbial community structure. Seven bacterial taxa (i.e. Bradyrhizobium, Bryobacter, Candidatus Solibacter, Geobacter, Gemmatimonas, Halingium, and Sphingomonas) were identified as the core microbiome. These taxa were strongly correlated with the As and Sb contaminant fractions and likely to metabolize As and Sb. Results imply that many soil microbes can survival in the Sb/As contaminated sites.