Impact of different grade roads on ecological networks: A case study of Fuzhou City, China.

The expansion of roads exacerbates the fragmentation of ecological networks and obstructs landscape connectivity. Scientific analysis of the impacts of different grades of roads on landscape connectivity and ecological networks is crucial for guiding road planning and ecological conservation. Based on the data of 2020 road network, land cover types, and digital elevation models, we used morphological spatial pattern analysis and circuit theory to construct ecological networks within different species dispersal distances (1, 3, 5, 10 km) in Fuzhou. We analyzed the impacts of roads of different grades (motorway, urban expressway, primary and secondary highway) on landscape connectivity at the landscape-patch-corridor scale. The results showed that at the landscape scale, overall landscape connectivity was significantly positively correlated with species dispersal distance. The motorway, urban expressway, primary and secondary highway had the lowest decline rate of overall landscape connectivity within a 10 km species dispersal range, being reduced by 15.6%, 5.3%, 1.5% and 5.2%, respectively. At the patch scale, in the comparison of roads of different grades, motorway led to the highest decline rate of patch connectivity within 1 and 5 km species dispersal range, while primary highway led to the highest decline rate of patch connectivity within 3 and 10 km species dispersal range. At the corridor scale, urban expressway led the highest increase rate of indices. The cost-weighted distance of the overall least-cost path, the ratio of cost-weighted distance to length, ove-rall effective resistance, and total corridor length within 5 km species dispersal range were increased by 43.4%, 33.2%, 57.3%, and 7.3%, respectively. As the distance of species dispersal increased, the patches with high importance were reduced from the northern, central, and northwestern regions to the northern regions, leading to a decrease in the living space of species, and the key corridors were gradually extending from the northwestern and southern regions to the central regions. Our results can guide the construction and optimization of Fuzhou's ecological network from an overall perspective, and provide a scientific basis for biodiversity conservation, ecological restoration, and road network planning under the context of limited land resource utilization.

Generation of induced pluripotent stem cell line (XDCMHi001-A) from an Ankylosing spondylitis patient with JAK2 mutation.

Heredity is the major factor contributing to the susceptibility to ankylosing spondylitis(AS). Janus kinase 2 (JAK2) has been associated with AS. Urine-derived cells from an AS patient with JAK2 mutation were used to generate induced pluripotent stem cells (iPSCs) with five episomal iPSC reprogramming vectors (pCXLE-hOCT3/4-shp53-F, pCXLE-hSK, pCXLE-hUL, pCXLE-EGFP and pCXWB-EBNA1). The iPSCs were pluripotent and will be valuable for research on the role and mechanism of JAK2 in the pathogenesis of AS.

Toxicological responses of the earthworm Eisenia fetida to 18-crown-6 under laboratory conditions.

The earthworm Eisenia fetida was exposed to artificial soil supplemented with 18-crown-6 (1,4,7,10,13,16-hexaoxacyclooctadecane) to investigate its effects on earthworm mortality, growth, avoidance, burrowing behavior and respiration. The results revealed that 18-crown-6 had the potential to negatively affect the behavior of earthworms. The 7-d LC50 was 585 mg kg(-1) soil. Avoidance behavior was the most sensitive endpoint, with a 48-h EC50 of 120 mg kg(-1) soil. Growth, burrow length and respiration showed general decreases with increasing 18-crown-6 concentrations. Behavioral endpoints and respiration may be regarded as sensitive parameters in evaluating the toxicity of this chemical to earthworms.

Atomic force microscopy of electrospun organic-inorganic lipid nanofibers.

An organic-inorganic hybridization strategy has been proposed to synthesize polymerizable lipid-based materials for the creation of highly stable lipid-mimetic nanostructures. We employ atomic force microscopy (AFM) to analyze the surface morphology and mechanical property of electrospun cholesteryl-succinyl silane (CSS) nanofibers. The AFM nanoindentation of the CSS nanofibers reveals elastic moduli of 55.3 ± 27.6 to 70.8 ± 35 MPa, which is significantly higher than the moduli of natural phospholipids and cholesterols. The study shows that organic-inorganic hybridization is useful in the design of highly stable lipid-based materials.

Autoclaving as a chemical-free process to stabilize recombinant silk-elastinlike protein polymer nanofibers.

We report here that autoclaving is a chemical-free, physical crosslinking strategy capable of stabilizing electrospun recombinant silk-elastinlike protein (SELP) polymer nanofibers. Fourier transform infrared spectroscopy showed that the autoclaving of SELP nanofibers induced a conformational conversion of ß-turns and unordered structures to ordered ß-sheets. Tensile stress-strain analysis of the autoclaved SELP nanofibrous scaffolds in phosphate buffered saline at 37 °C revealed a Young's modulus of 1.02 ± 0.28 MPa, an ultimate tensile strength of 0.34 ± 0.04 MPa, and a strain at failure of 29% ± 3%.

Complete recombinant silk-elastinlike protein-based tissue scaffold.

Due to their improved biocompatibility and specificity over synthetic materials, protein-based biomaterials, either derived from natural sources or genetically engineered, have been widely fabricated into nanofibrous scaffolds for tissue engineering applications. However, their inferior mechanical properties often require the reinforcement of protein-based tissue scaffolds using synthetic polymers. In this study, we report the electrospinning of a completely recombinant silk-elastinlike protein-based tissue scaffold with excellent mechanical properties and biocompatibility. In particular, SELP-47K containing tandemly repeated polypeptide sequences derived from native silk and elastin was electrospun into nanofibrous scaffolds, and stabilized via chemical vapor treatment and mechanical preconditioning. When fully hydrated in 1× PBS at 37 °C, mechanically preconditioned SELP-47K scaffolds displayed elastic moduli of 3.4-13.2 MPa, ultimate tensile strengths of 5.7-13.5 MPa, deformabilities of 100-130% strain, and resilience of 80.6-86.9%, closely matching or exceeding those of protein-synthetic blend polymeric scaffolds. Additionally, SELP-47K nanofibrous scaffolds promoted cell attachment and growth, demonstrating their in vitro biocompatibility.

Wet-spinning of recombinant silk-elastin-like protein polymer fibers with high tensile strength and high deformability.

A recombinant silk-elastin-like protein copolymer SELP-47K containing tandemly repeated amino acid sequence blocks from silk, GAGAGS, and elastin, GVGVP, was fabricated into microdiameter fibers using a wet-spinning technique. Raman spectral analysis revealed the formation of antiparallel beta-sheet crystals of the silk-like blocks. Dry SELP-47K fibers display the dependence of mechanical properties such as Young's modulus on fiber diameter, suggesting more oriented and crystallized molecular chains in small-diameter fibers. Additionally, a brittle fracture mode was identified for dry fibers by SEM analysis of fracture surfaces. Hydration dramatically influenced the mechanical behavior of SELP-47K fibers. In contrast to the high tensile strength and limited strains to failure of dry fibers, fully hydrated SELP-47K fibers possessed strains to failure as high as 700%. Furthermore, upon chemical cross-linking, a tensile mechanical strength up to 20 MPa was achieved in hydrated fibers without compromising their high deformability. By combing the silk- and elastin-derived sequences into a single SELP-47K protein polymer, we demonstrated that protein fibers with high tensile strength and high deformability can be fabricated.