Energy calibration of integrated path differential absorption lidars.

The stringent requirements for energy reference measurement represent a challenging task for integrated path differential absorption lidars to measure greenhouse gas columns from satellite or aircraft. The coherence of the lidar transmitter gives rise to speckle effects that have to be considered for accurate monitoring of the energy ratio of outgoing on- and off-line pulses. Detailed investigations have been performed on various measurement concepts potentially suited for deployment within future satellite missions.

CHARM-F-a new airborne integrated-path differential-absorption lidar for carbon dioxide and methane observations: measurement performance and quantification of strong point source emissions.

The integrated-path differential-absorption lidar CHARM-F (CO2 and CH4 Remote Monitoring-Flugzeug) was developed for the simultaneous measurement of the greenhouse gases CO2 and CH4 onboard the German research aircraft HALO (High Altitude and Long Range Research Aircraft). The purpose is to derive the weighted, column-averaged dry-air mixing ratios of the two gases with high precision and accuracy between aircraft and ground or cloud tops. This paper presents the first measurements, performed in the spring of 2015, and shows performance analyses as well as the methodology for the quantification of strong point sources applied on example cases. A measurement precision of below 0.5% for 20 km averages was found. However, individual measurements still show deviations of the absolute mixing ratios compared to corresponding data from in situ profiles. The detailed analysis of the methane point source emission rate yields plausible results (26±3 m3/min or 9.2±1.15 kt CH4 yr-1), which is in good agreement with reported numbers. In terms of CO2, a power plant emission could be identified and analyzed.

Spectrally programmable light engine for in vitro or in vivo molecular imaging and spectroscopy.

A spectrally and temporally programmable light engine can create any spectral profile for hyperspectral, fluorescence, or principal-component imaging or with medical photonics devices employing spectroscopy, microscopy, and endoscopy. Multispectral imaging feasibility was demonstrated by capturing nine images at wavelengths from 450 to 650 mm (25-nm FWHM) with a CCD-camera-equipped bronchoscope coupled to the light engine. Selected wavelength regions were combined to produce a color endoscopy image.