Interface engineering in ZnO/CdO hybrid nanocomposites to enhanced resistive switching memory for neuromorphic computing.

Resistive random-access memory (RRAMs) has attracted significant interest for their potential applications in embedded storage and neuromorphic computing. Materials based on metal chalcogenides have emerged as promising candidates for the fulfilment of these requirements. Due to its ability to manipulate electronic states and control trap states through controlled compositional dynamics, metal chalcogenide RRAM has excellent non-volatile resistive memory properties. In the present we have synthesized ZnO-CdO hybrid nanocomposite by using hydrothermal method as an active layer. The Ag/C15ZO/Pt hybrid nanocomposite structure memristors showed electrical properties similar to biological synapses. The device exhibited remarkably stable resistive switching properties that have a low SET/RESET (0.41/-0.2) voltage, a high RON/OFF ratio of approximately 105, a high retention stability, excellent endurance reliability up to 104 cycles and multilevel device storage performance by controlling the compliance current. Furthermore, they exhibited an impressive performance in terms of emulating biological synaptic functions, which include long-term potentiation (LTP), long-term depression (LTD), and paired-pulse facilitation (PPF), via the continuous modulation of conductance. The hybrid nanocomposite memristors notably achieved an impressive recognition accuracy of up to 92.6 % for handwritten digit recognition under artificial neural network (ANN). This study shows that hybrid-nanocomposite memristor performance could lead to efficient future neuromorphic architectures.

Contemporary innovations in two-dimensional transition metal dichalcogenide-based P-N junctions for optoelectronics.

Two-dimensional transition metal dichalcogenides (2D-TMDCs) with various physical characteristics have attracted significant interest from the scientific and industrial worlds in the years following Moore's law. The p-n junction is one of the earliest electrical components to be utilized in electronics and optoelectronics, and modern research on 2D materials has renewed interest in it. In this regard, device preparation and application have evolved substantially in this decade. 2D TMDCs provide unprecedented flexibility in the construction of innovative p-n junction device designs, which is not achievable with traditional bulk semiconductors. It has been investigated using 2D TMDCs for various junctions, including homojunctions, heterojunctions, P-I-N junctions, and broken gap junctions. To achieve high-performance p-n junctions, several issues still need to be resolved, such as developing 2D TMDCs of superior quality, raising the rectification ratio and quantum efficiency, and successfully separating the photogenerated electron-hole pairs, among other things. This review comprehensively details the various 2D-based p-n junction geometries investigated with an emphasis on 2D junctions. We investigated the 2D p-n junctions utilized in current rectifiers and photodetectors. To make a comparison of various devices easier, important optoelectronic and electronic features are presented. We thoroughly assessed the review's prospects and challenges for this emerging field of study. This study will serve as a roadmap for more real-world photodetection technology applications.

Self-Assembled Monolayer Doping for MoTe2 Field-Effect Transistors: Overcoming PN Doping Challenges in Transition Metal Dichalcogenides.

Transition metal dichalcogenides (TMDs) have gained significant attention as next-generation semiconductor materials that could potentially overcome the integration limits of silicon-based electronic devices. However, a challenge in utilizing TMDs as semiconductors is the lack of an established PN doping method to effectively control their electrical properties, unlike those of silicon-based semiconductors. Conventional PN doping methods, such as ion implantation, can induce lattice damage in TMDs. Thus, chemical doping methods that can control the Schottky barrier while minimizing lattice damage are desirable. Here, we focus on the molybdenum ditelluride (2H-MoTe2), which has a hexagonal phase and exhibits ambipolar field-effect transistor (FET) properties due to its direct band gap of 1.1 eV, enabling concurrent transport of electrons and holes. We demonstrate the fabrication of p- or n-type unipolar FETs in ambipolar MoTe2 FETs using self-assembled monolayers (SAMs) as chemical dopants. Specifically, we employ 1H,1H,2H,2H perfluorooctyltriethoxysilane and (3-aminopropyl)triethoxysilane as SAMs for chemical doping. The selective SAMs effectively increase the hole and electron charge transport capabilities in MoTe2 FETs by 18.4- and 4.6-fold, respectively, due to the dipole effect of the SAMs. Furthermore, the Raman shift of MoTe2 by SAM coating confirms the successful p- and n-type doping. Finally, we demonstrate the fabrication of complementary inverters using SAMs-doped MoTe2 FETs, which exhibit clear full-swing capability compared to undoped complementary inverters.

Optically Reconfigurable Complementary Logic Gates Enabled by Bipolar Photoresponse in Gallium Selenide Memtransistor.

To avoid the complexity of the circuit for in-memory computing, simultaneous execution of multiple logic gates (OR, AND, NOR, and NAND) and memory behavior are demonstrated in a single device of oxygen plasma-treated gallium selenide (GaSe) memtransistor. Resistive switching behavior with RON /ROFF ratio in the range of 104 to 106 is obtained depending on the channel length (150 to 1600 nm). Oxygen plasma treatment on GaSe film created shallow and deep-level defect states, which exhibit carriers trapping/de-trapping, that lead to negative and positive photoconductance at positive and negative gate voltages, respectively. This distinguishing feature of gate-dependent transition of negative to positive photoconductance encourages the execution of four logic gates in the single memory device, which is elusive in conventional memtransistor. Additionally, it is feasible to reversibly switch between two logic gates by just adjusting the gate voltages, e.g., NAND/NOR and AND/NAND. All logic gates presented high stability. Additionally, memtransistor array (1×8) is fabricated and programmed into binary bits representing ASCII (American Standard Code for Information Interchange) code for the uppercase letter "N". This facile device configuration can provide the functionality of both logic and memory devices for emerging neuromorphic computing.

Controlling the Wettability of ZnO Thin Films by Spray Pyrolysis for Photocatalytic Applications.

Herein, we synthesized the zinc oxide (ZnO) thin films (TFs) deposited on glass substrates via spray pyrolysis (SP) to prepare self-cleaning glass. Various process parameters were used to optimize photocatalytic performance. Substrates were coated at room temperature (RT) and 250 °C with a 1 mL or 2 mL ZnO solution while maintaining a distance from the spray gun to the substrate of 20 cm or 30 cm. Several characterization techniques, i.e., XRD, SEM, AFM, and UV-Vis were used to determine the structural, morphological, and optical characteristics of the prepared samples. The wettability of the samples was evaluated using contact angle measurements. As ZnO is hydrophilic in nature, the RT deposited samples showed a hydrophilic character, whereas the ZnO TFs deposited at 250 °C demonstrated a hydrophobic character. The XRD results showed a higher degree of crystallinity for samples deposited on heated substrates. Because of this higher crystallinity, the surface energy decreased, and the contact angle increased. Moreover, by using 2 mL solution, better surface coverage and roughness were obtained for the ZnO TFs. However, by exploiting the distance of the spray to the samples size distribution and surface coverage can be controlled, the samples deposited at 30 mL showed a uniform particle size distribution from 30-40 nm. In addition, the photoactivity of the samples was tested by the degradation of rhodamine B dye. Substrates prepared with a 2 mL solution sprayed at 20 cm showed higher dye degradation than other samples, which can play a vital role in self-cleaning. Hence, by changing the said parameters, the ZnO thin film properties on glass substrates were optimized for self-cleaning diversity.