ABSTRACT
Tissue-mimicking materials (TMMs) are widely used in quality assurance (QA) phantoms to assess the performance of ultrasound scanners. The International Electrotechnical Commission (IEC) defines the acoustic parameters of up to 10MHz. To manufacture a TMM that closely mimics the acoustical properties of small animal soft tissue at high frequencies, the acoustic properties of each of the individual component ingredients used in the IEC agar-TMM recipe need to be quantified. This study was aimed at evaluating whether the overall attenuation coefficient of the IEC agar-TMM is the linear sum of the attenuation coefficients of each of its ingredients. Eight batches of agar-based materials were manufactured with different combinations of ingredients from the IEC agar-TMM recipe. The percentage concentration of each ingredient used in the individual mixes was identical to that specified in the IEC recipe. The attenuation of each of these batches was measured over the ultrasound frequency range 12-50MHz, and the attenuation value of the agar component was subtracted from the attenuation values of the other batches. Batch attenuation values, representing the attenuation of individual components within the IEC agar-TMM, were then summated and yielded attenuation values that accurately reproduced the attenuation of the IEC agar-TMM. This information forms a valuable resource for the future development of TMMs with acoustic properties similar to those of soft tissue at high frequencies.
Subject(s)
Agar , Biomimetic Materials/chemistry , Biomimetics/methods , Phantoms, Imaging , Ultrasonography , AcousticsABSTRACT
Quality assurance phantoms are made of tissue-mimicking materials (TMMs) the acoustic properties of which mimic those of soft tissue. However, the acoustic properties of many soft tissue types have not been measured at ultrasonic frequencies >9 MHz. With the increasing use of high-frequency ultrasound for both clinical and pre-clinical applications, it is of increasing interest to ensure that TMMs accurately reflect the acoustic properties of soft tissue at these higher frequencies. In this study, the acoustic properties of ex vivo brain, liver and kidney samples from 50 mice were assessed in the frequency range 12-32 MHz. Measurements were performed within 6 min of euthanasia in a phosphate-buffered saline solution maintained at 37.2 ± 0.2 °C. The measured mean values for the speed of sound for all organs were found to be higher than the International Electrotechnical Commission guideline recommended value for TMMs. The attenuation coefficients measured for brain, liver and kidney samples were compared with the results of previous studies at lower frequencies. Only the measured kidney attenuation coefficient was found to be in good agreement with the International Electrotechnical Commission guideline. The information provided in this study can be used as a baseline on which to manufacture a TMM suitable for high-frequency applications.
Subject(s)
Brain/anatomy & histology , Kidney/anatomy & histology , Liver/anatomy & histology , Ultrasonography/methods , Acoustics , Animals , Brain/diagnostic imaging , Kidney/diagnostic imaging , Liver/diagnostic imaging , Male , Mice , Mice, Inbred C57BL , Models, AnimalABSTRACT
Commercially available ultrasound quality assurance test phantoms rely on the long-term acoustic stability of the tissue-mimicking-material (TMM). Measurement of the acoustic properties of the TMM can be technically challenging, and it is important to ensure its stability. The standard technique is to film-wrap samples of TMM and to measure the acoustic properties in a water bath. In this study, a modified technique was proposed whereby the samples of TMM are measured in a preserving fluid that is intended to maintain their characteristics. The acoustic properties were evaluated using a broadband pulse-echo substitution technique over the frequency range 4.5-50 MHz at 0, 6 and 12 months using both techniques. For both techniques, the measured mean values for the speed of sound and attenuation were very similar and within the International Electrotechnical Commission-recommended value. However, the results obtained using the proposed modified technique exhibited greater stability over the 1-y period compared with the results acquired using the standard technique.