Escape our Lab: creating an escape room game in the field of materials science and crystallography.

Although many challenges of the 21st century need solutions which are directly connected with the development of new technologies, the preferences of prospective students in Germany are often far from mathematics, physics and chemistry. Moreover, the acceptance and recognition of new achievements in these disciplines are quite low in society, even if these achievements are the basis for the development of new technologies that positively affect daily life. As a part of a campaign intended to increase the number of students in the fields of materials science and materials technology (and related fields), the authors created an escape room focused on materials science and crystallography, which illustrates the approaches used by materials scientists and the beauty of crystallography. The fundamental features of the escape room, which are presented in this contribution, are its variability and the ability to inspire participants who have different backgrounds in physics, chemistry and/or materials science. By varying the level of difficulty and the game play duration, the escape room structure makes it possible to appeal to a broad audience, offer an authentic escape room experience and impart lasting knowledge through reflection after completion. The authors' experiences with the escape room and the feedback from the attendees are summarized at the end of the contribution.

Influence of the hierarchical architecture of multi-core iron oxide nanoflowers on their magnetic properties.

Magnetic properties of superparamagnetic iron oxide nanoparticles are controlled mainly by their particle size and by their particle size distribution. Magnetic properties of multi-core iron oxide nanoparticles, often called iron oxide nanoflowers (IONFs), are additionally affected by the interaction of magnetic moments between neighboring cores. The knowledge about the hierarchical structure of IONFs is therefore essential for understanding the magnetic properties of IONFs. In this contribution, the architecture of multi-core IONFs was investigated using correlative multiscale transmission electron microscopy (TEM), X-ray diffraction and dynamic light scattering. The multiscale TEM measurements comprised low-resolution and high-resolution imaging as well as geometric phase analysis. The IONFs contained maghemite with the average chemical composition [Formula: see text]-Fe[Formula: see text]O[Formula: see text]. The metallic vacancies located on the octahedral lattice sites of the spinel ferrite structure were partially ordered. Individual IONFs consisted of several cores showing frequently a specific crystallographic orientation relationship between direct neighbors. This oriented attachment may facilitate the magnetic alignment within the cores. Individual cores were composed of partially coherent nanocrystals having almost the same crystallographic orientation. The sizes of individual constituents revealed by the microstructure analysis were correlated with the magnetic particle sizes that were obtained from fitting the measured magnetization curve by the Langevin function.

Hematites Precipitated in Alkaline Precursors: Comparison of Structural and Textural Properties for Methane Oxidation.

Hematite (α-Fe2O3) catalysts prepared using the precipitation methods was found to be highly effective, and therefore, it was studied with methane (CH4), showing an excellent stable performance below 500 °C. This study investigates hematite nanoparticles (NPs) obtained by precipitation in water from the precursor of ferric chloride hexahydrate using precipitating agents NaOH or NH4OH at maintained pH 11 and calcined up to 500 °C for the catalytic oxidation of low concentrations of CH4 (5% by volume in air) at 500 °C to compare their structural state in a CH4 reducing environment. The conversion (%) of CH4 values decreasing with time was discussed according to the course of different transformation of goethite and hydrohematites NPs precursors to magnetite and the structural state of the calcined hydrohematites. The phase composition, the size and morphology of nanocrystallites, thermal transformation of precipitates and the specific surface area of the NPs were characterized in detail by X-ray powder diffraction, transmission electron microscopy, infrared spectroscopy, thermal TG/DTA analysis and nitrogen physisorption measurements. The results support the finding that after goethite dehydration, transformation to hydrohematite due to structurally incorporated water and vacancies is different from hydrohematite α-Fe2O3. The surface area SBET of Fe2O3_NH-70 precipitate composed of protohematite was larger by about 53 m2/g in comparison with Fe2O3_Na-70 precipitate composed of goethite. The oxidation of methane was positively influenced by the hydrohematites of the smaller particle size and the largest lattice volume containing structurally incorporated water and vacancies.

Calcite Nanotuned Chitinous Skeletons of Giant Ianthella basta Marine Demosponge.

Marine sponges were among the first multicellular organisms on our planet and have survived to this day thanks to their unique mechanisms of chemical defense and the specific design of their skeletons, which have been optimized over millions of years of evolution to effectively inhabit the aquatic environment. In this work, we carried out studies to elucidate the nature and nanostructural organization of three-dimensional skeletal microfibers of the giant marine demosponge Ianthella basta, the body of which is a micro-reticular, durable structure that determines the ideal filtration function of this organism. For the first time, using the battery of analytical tools including three-dimensional micro-X-ray Fluorescence (3D-µXRF), X-ray diffraction (XRD), infra-red (FTIR), Raman and Near Edge X-ray Fine Structure (NEXAFS) spectroscopy, we have shown that biomineral calcite is responsible for nano-tuning the skeletal fibers of this sponge species. This is the first report on the presence of a calcitic mineral phase in representatives of verongiid sponges which belong to the class Demospongiae. Our experimental data suggest a possible role for structural amino polysaccharide chitin as a template for calcification. Our study suggests further experiments to elucidate both the origin of calcium carbonate inside the skeleton of this sponge and the mechanisms of biomineralization in the surface layers of chitin microfibers saturated with bromotyrosines, which have effective antimicrobial properties and are responsible for the chemical defense of this organism. The discovery of the calcified phase in the chitinous template of I. basta skeleton is expected to broaden the knowledge in biomineralization science where the calcium carbonate is regarded as a valuable material for applications in biomedicine, environmental science, and even in civil engineering.

Valence fluctuations in the 3D + 3 modulated Yb3Co4Ge13 Remeika phase.

Yb3Co4Ge13 is the first example of a Remeika phase with a 3D + 3 [space group P4̄3n(α,0,0)000(0,α,0)000(0,0,α)000; a = 8.72328(1) Å, α = 0.4974(2)] modulated crystal structure. A slight shift of the composition towards higher Yb-content (i.e. Yb3.2Co4Ge12.8) leads to the disappearance of the satellite reflections and stabilization of the disordered primitive cubic [space group Pm3̄n, a = 8.74072(2) Å] Remeika prototype structure. The stoichiometric structurally modulated germanide is a metal with hole-like charge carriers, where Yb-ions are in a temperature-dependent intermediate valence state varying from +2.60 to +2.66 for the temperature range 85-293 K. The valence fluctuations have been investigated by means of temperature dependent X-ray absorption spectroscopy, magnetic susceptibility and thermopower measurements.

Extreme Biomimetics: Designing of the First Nanostructured 3D Spongin-Atacamite Composite and its Application.

The design of new composite materials using extreme biomimetics is of crucial importance for bioinspired materials science. Further progress in research and application of these new materials is impossible without understanding the mechanisms of formation, as well as structural features at the molecular and nano-level. It presents a challenge to obtain a holistic understanding of the mechanisms underlying the interaction of organic and inorganic phases under conditions of harsh chemical reactions for biopolymers. Yet, an understanding of these mechanisms can lead to the development of unusual-but functional-hybrid materials. In this work, a key way of designing centimeter-scale macroporous 3D composites, using renewable marine biopolymer spongin and a model industrial solution that simulates the highly toxic copper-containing waste generated in the production of printed circuit boards worldwide, is proposed. A new spongin-atacamite composite material is developed and its structure is confirmed using neutron diffraction, X-ray diffraction, high-resolution transmission electron microscopy/selected-area electron diffraction, X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and electron paramagnetic resonance spectroscopy. The formation mechanism for this material is also proposed. This study provides experimental evidence suggesting multifunctional applicability of the designed composite in the development of 3D constructed sensors, catalysts, and antibacterial filter systems.

Functionalization of 3D Chitinous Skeletal Scaffolds of Sponge Origin Using Silver Nanoparticles and Their Antibacterial Properties.

Chitin, as one of nature's most abundant structural polysaccharides, possesses worldwide, high industrial potential and a functionality that is topically pertinent. Nowadays, the metallization of naturally predesigned, 3D chitinous scaffolds originating from marine sponges is drawing focused attention. These invertebrates represent a unique, renewable source of specialized chitin due to their ability to grow under marine farming conditions. In this study, the development of composite material in the form of 3D chitin-based skeletal scaffolds covered with silver nanoparticles (AgNPs) and Ag-bromide is described for the first time. Additionally, the antibacterial properties of the obtained materials and their possible applications as a water filtration system are also investigated.

3D Chitin Scaffolds of Marine Demosponge Origin for Biomimetic Mollusk Hemolymph-Associated Biomineralization Ex-Vivo.

Structure-based tissue engineering requires large-scale 3D cell/tissue manufacture technologies, to produce biologically active scaffolds. Special attention is currently paid to naturally pre-designed scaffolds found in skeletons of marine sponges, which represent a renewable resource of biomaterials. Here, an innovative approach to the production of mineralized scaffolds of natural origin is proposed. For the first time, a method to obtain calcium carbonate deposition ex vivo, using living mollusks hemolymph and a marine-sponge-derived template, is specifically described. For this purpose, the marine sponge Aplysin aarcheri and the terrestrial snail Cornu aspersum were selected as appropriate 3D chitinous scaffold and as hemolymph donor, respectively. The formation of calcium-based phase on the surface of chitinous matrix after its immersion into hemolymph was confirmed by Alizarin Red staining. A direct role of mollusks hemocytes is proposed in the creation of fine-tuned microenvironment necessary for calcification ex vivo. The X-ray diffraction pattern of the sample showed a high CaCO3 amorphous content. Raman spectroscopy evidenced also a crystalline component, with spectra corresponding to biogenic calcite. This study resulted in the development of a new biomimetic product based on ex vivo synthetized ACC and calcite tightly bound to the surface of 3D sponge chitin structure.

Spider Chitin. The biomimetic potential and applications of Caribena versicolor tubular chitin.

Diverse fields of modern technology and biomedicine can benefit from the application of ready-to-use chitin-based scaffolds. In this work we show for the first time the applicability of tubular and porous chitin from Caribena versicolor spiders as a scaffold for the development of an effective CuO/Cu(OH)2 catalyst for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AM), and as a scaffold for the tissue engineering of selected cells. The formation of CuO/Cu(OH)2 phases on and within the chitinous tubes leads to a hybrid material with excellent catalytic performance with respect to the reduction of p-nitrophenol. On the other hand, experimental results provide for the first time strong evidence for the biocompatibility of spider chitin with different cell types, a human progenitor cell line (hPheo1), as well as cardiomyocytes differentiated from induced pluripotent stem cells (iPSC-CMs) that were cultured on a tube-like scaffold.

Extreme biomimetics: Preservation of molecular detail in centimeter-scale samples of biological meshes laid down by sponges.

Fabrication of biomimetic materials and scaffolds is usually a micro- or even nanoscale process; however, most testing and all manufacturing require larger-scale synthesis of nanoscale features. Here, we propose the utilization of naturally prefabricated three-dimensional (3D) spongin scaffolds that preserve molecular detail across centimeter-scale samples. The fine-scale structure of this collagenous resource is stable at temperatures of up to 1200°C and can produce up to 4 × 10-cm-large 3D microfibrous and nanoporous turbostratic graphite. Our findings highlight the fact that this turbostratic graphite is exceptional at preserving the nanostructural features typical for triple-helix collagen. The resulting carbon sponge resembles the shape and unique microarchitecture of the original spongin scaffold. Copper electroplating of the obtained composite leads to a hybrid material with excellent catalytic performance with respect to the reduction of p-nitrophenol in both freshwater and marine environments.

Spider Chitin: An Ultrafast Microwave-Assisted Method for Chitin Isolation from Caribena versicolor Spider Molt Cuticle.

Chitin, as a fundamental polysaccharide in invertebrate skeletons, continues to be actively investigated, especially with respect to new sources and the development of effective methods for its extraction. Recent attention has been focused on marine crustaceans and sponges; however, the potential of spiders (order Araneae) as an alternative source of tubular chitin has been overlooked. In this work, we focused our attention on chitin from up to 12 cm-large Theraphosidae spiders, popularly known as tarantulas or bird-eating spiders. These organisms "lose" large quantities of cuticles during their molting cycle. Here, we present for the first time a highly effective method for the isolation of chitin from Caribena versicolor spider molt cuticle, as well as its identification and characterization using modern analytical methods. We suggest that the tube-like molt cuticle of this spider can serve as a naturally prefabricated and renewable source of tubular chitin with high potential for application in technology and biomedicine.

Quantum plasmon excitations in gold-fullerene mixture films.

Controllable access to the hybrid plasmonic nanostructures built of small metal nanoparticles and organic spacer offers a tempting set of electronic excitations, which proper handling promises valuable applications and bright fundamental prospect. Here, we report on remarkable plasmonic properties of the Au x C60 hybrid nanostructures formed through self-assembling the depositing mixture of metal and fullerene. Using optical absorption spectra, we demonstrate establishing of quantum plasmon (QP) excitations upon the controllable increase of spatial density and size of the Au clusters formed in the films. Detection of two plasmonic modes evidences the QP hybridization enabling by nm-scaled proximity of the neighboured Au clusters. Variation of the QP mode parameters with gradual decrease of the inter-cluster spacing ΔL to the sub-nanometre scale driven by the Au concentration in the film x allowed us to evidence the quantum tunnelling regime in the QP hybridization launching at ΔL ≈ 0.9 nm. The later result designates an important role of the C60 molecules, separating the Au clusters, in design of plasmonic and transport properties of the hybrid films. The obtained results represent the self-assembled Au x C60 nanocomposites as the promising plasmonic materials with potential for application in nanoplasmonics, nanoelectronics, and nanomedicine.

Structure model of γ-Al2O3 based on planar defects.

The defect structure of γ-Al2O3 derived from boehmite was investigated using a combination of selected-area electron diffraction (SAED) and powder X-ray diffraction (XRD). Both methods confirmed a strong dependence of the diffraction line broadening on the diffraction indices known from literature. The analysis of the SAED patterns revealed that the dominant structure defects in the spinel-type γ-Al2O3 are antiphase boundaries located on the lattice planes , which produce the sublattice shifts . Quantitative information about the defect structure of γ-Al2O3 was obtained from the powder XRD patterns. This includes mainly the size of γ-Al2O3 crystallites and the density of planar defects. The correlation between the density of the planar defects and the presence of structural vacancies, which maintain the stoichiometry of the spinel-type γ-Al2O3, is discussed. A computer routine running on a fast graphical processing unit was written for simulation of the XRD patterns. This routine calculates the atomic positions for a given kind and density of planar defect, and simulates the diffracted intensities with the aid of the Debye scattering equation.

Ferroelastic domain identification in BiFeO3 crystals using Raman spectroscopy.

Multiferroic BiFeO3 crystals were investigated by means of micro-Raman spectroscopy using the laser wavelengths of 442 nm (resonant conditions) and 633 nm (non-resonant conditions). The azimuthal angle dependence of the intensity of the Raman modes allowed their symmetry assignment. The experimental data are consistent with a simulation based on Raman tensor formalism. Mixed symmetries were taken into account, considering the orientation of the crystal optic axis along a pseudo-cubic <111> direction. The strong anisotropic intensity variation of some of the polar Raman modes was used for line scans and mappings in order to identify ferroelastic domain patterns. The line scans performed with different excitation wavelengths and hence different information depths indicate a tilt of the domain walls with respect to the sample surface. The domain distribution found by Raman spectroscopy is in very good agreement with the finding of electron back scattering diffraction.

Modification of the Electrolyte/Electrode Interface for the Template-free Electrochemical Synthesis of Metal Nanowires from Ionic Liquids.

In electrochemistry, the electrode/electrolyte interface (EEI) governs the charge/mass-transfer processes and controls the nucleation/growth phenomena. The EEI in ionic liquids (ILs) can be controlled by changing the cation/anion of the IL, salt concentration, electrode potential, and temperature. Here, we show that adding a dopant salt leads to the deposition of nanowires. To illustrate, zinc nanowires were electrodeposited from ZnCl2/1-butyl-1-methylpyrrolidinium trifluoromethylsulfonate in the presence of GaCl3 as a dopant salt. The choice of Zn salt and its ratio to GaCl3 were found to be crucial for Zn nanowires formation. AFM studies revealed that the solvation structure of Au(111)/IL changes significantly in the presence of GaCl3 and ZnCl2. Chronoamperometry showed changes in the nucleation/growth process, consequently leading to the formation of nanowires. A similar approach was adopted to synthesize Sn nanowires. Thus, modification of the EEI by adding a dopant to ILs can be a viable method to obtain nanowires.

Quantum plasmon and Rashba-like spin splitting in self-assembled Co x C60 composites with enhanced Co content (x > 15).

Driving by interplay between plasmonic and magnetic effects in organic composite semiconductors is a challenging task with a huge potential for practical applications. Here, we present evidence of a quantum plasmon excited in the self-assembled Co x C60 nanocomposite films with x > 15 (interval of the Co cluster coalescence) and analyse it using the optical absorption (OA) spectra. In the case of Co x C60 film with x = 16 (LF sample), the quantum plasmon generated by the Co/CoO clusters is found as the 1.5 eV-centred OA peak. This finding is supported by the establishment of four specific C60-related OA lines detected at the photon energies E p  > 2.5 eV. Increase of the Co content up to x = 29 (HF sample) leads to pronounced enhancement of OA intensity in the energy range of E p  > 2.5 eV and to plasmonic peak downshift of 0.2 eV with respect to the peak position in the LF spectrum. Four pairs of the OA peaks evaluated in the HF spectrum at E p  > 2.5 eV reflect splitting of the C60-related lines, suggesting great change in the microscopic conditions with increasing x. Analysis of the film nanostructure and the plasmon-induced conditions allows us to propose a Rashba-like spin splitting effect that suggests valuable sources for spin polarization.

Effect of screw threading dislocations and inverse domain boundaries in GaN on the shape of reciprocal-space maps.

The microstructure of polar GaN layers, grown by upgraded high-temperature vapour phase epitaxy on [001]-oriented sapphire substrates, was studied by means of high-resolution X-ray diffraction and transmission electron microscopy. Systematic differences between reciprocal-space maps measured by X-ray diffraction and those which were simulated for different densities of threading dislocations revealed that threading dislocations are not the only microstructure defect in these GaN layers. Conventional dark-field transmission electron microscopy and convergent-beam electron diffraction detected vertical inversion domains as an additional microstructure feature. On a series of polar GaN layers with different proportions of threading dislocations and inversion domain boundaries, this contribution illustrates the capability and limitations of coplanar reciprocal-space mapping by X-ray diffraction to distinguish between these microstructure features.

Functionalization of organically modified silica with gold nanoparticles in the presence of lignosulfonate.

It is shown that lignosulfonate (LS) can be used as an effective reducing agent for gold ions and simultaneously as a stabilizing agent for gold nanoparticles (AuNPs). When organically modified silica is introduced to the reaction mixture, most of the AuNPs grow on the surface of the silica due to hydrophobic interactions between LS and organic layers covering the solid particles. It was also found that the structure of the organic layer is crucial for the effective deposition of gold nanoparticles onto silica spheres in terms of particle size and gold content in the final SiO2-LS-AuNPs composites. Due to the hydrophobicity of the modified silica it was necessary to carry out the modification in mixed organic/aqueous solvent. The polarity of the organic co-solvent was found to have an effect on the size of the deposited Au-NPs and their quantity. The physical appearance of the obtained hybrids was analyzed by colorimetry, and their structure and composition were evaluated using transmission electron microscopy (TEM). Additionally dispersive and thermal properties were examined by dynamic light scattering (DLS) and thermogravimetry (TG), respectively. The obtained multifunctional hybrid materials exhibits remarkable catalytic activity for the reduction of C.I. Basic Blue 9 (Methylene Blue) by borohydride.

Capability of X-ray diffraction for the study of microstructure of metastable thin films.

Metastable phases are often used to design materials with outstanding properties, which cannot be achieved with thermodynamically stable compounds. In many cases, the metastable phases are employed as precursors for controlled formation of nanocomposites. This contribution shows how the microstructure of crystalline metastable phases and the formation of nanocomposites can be concluded from X-ray diffraction experiments by taking advantage of the high sensitivity of X-ray diffraction to macroscopic and microscopic lattice deformations and to the dependence of the lattice deformations on the crystallographic direction. The lattice deformations were determined from the positions and from the widths of the diffraction lines, the dependence of the lattice deformations on the crystallographic direction from the anisotropy of the line shift and the line broadening. As an example of the metastable system, the supersaturated solid solution of titanium nitride and aluminium nitride was investigated, which was prepared in the form of thin films by using cathodic arc evaporation of titanium and aluminium in a nitrogen atmosphere. The microstructure of the (Ti,Al)N samples under study was tailored by modifying the [Al]/[Ti] ratio in the thin films and the surface mobility of the deposited species.