ABSTRACT
In this paper, we report the effect of MnS nanoparticles on the electrochemical performance of 1D-MnO2 stable nanorods for supercapacitor electrodes. The MnS-incorporated 1D-MnO2 (MnO2/MnS) nanorods were produced using a facile two-step hydrothermal method. Morphological investigation reveals that the incorporation of MnS nanoparticles distorts the lattice fringes and extends the interlayer spacing of the MnO2 nanorods. The structural study showed that MnS modified the structural parameters of the nanocomposite. XPS analysis revealed defects in the nanocomposite due to the generation of oxygen vacancies. The MnO2/MnS nanocomposite improves capacitive performance and has the highest specific capacitance of 305 F g-1, at a current density of 1 A g-1 with an energy density of 5.7 W h kg-1 and a power density of 449 W kg-1. The MnO2/MnS nanocomposite electrodes exhibit exceptional cyclic stability after 5000 charging and discharging cycles. With enhanced specific capacitance and excellent cyclic stability, the MnO2/MnS nanocomposite paves a new way to produce supercapacitor electrodes.
ABSTRACT
The large number of active sites in the layered structure of δ-MnO2 with considerable interlayer spacing makes it an excellent candidate for ion storage. Unfortunately, the δ-MnO2-based electrode has not yet attained the exceptional storage potential that it should demonstrate because of disappointing structural deterioration during periodic charging and discharging. Here, we represent that stable Na ion storage in δ-MnO2 may be triggered by the preintercalation of K ions and water molecules. Furthermore, the sluggish reaction kinetics and poor electrical conductivity of preintercalated δ-MnO2 layers are overcome by the incorporation of h-WO3 in the preintercalated δ-MnO2 to form novel composite electrodes. The composites contain mixed valence metals, which provide a great number of active sites along with improved redox activity, while maintaining a fast ion transfer efficiency to enhance the pseudocapacitance performance. Based on our research, the composite prepared from preintercalated δ-MnO2 with 5 wt % h-WO3 provides a specific capacitance of up to 363.8 F g-1 at a current density of 1.5 A g-1 and an improved energy density (32.3 W h kg-1) along with an â¼14% increase in capacity upon cycling up to 5000 cycles. Hence, the interaction between the preintercalated δ-MnO2 and h-WO3 nanorods results in satisfactory energy storage performance due to the defect-rich structure, high conductivity, superior stability, and lower charge transfer resistance. This research has the potential to pave the way for a new class of hybrid supercapacitors that could fill the energy gap between chemical batteries and ideal capacitors.
ABSTRACT
In this work, MnO2/NiO nanocomposite electrode materials have been synthesized by a cost-effective hydrothermal method. The effect of the concentrations (0, 1, 3, 5, and 7 wt%) of NiO nanoparticles on the surface morphology, structural properties, and electrochemical performance of the nanocomposites was characterized by different characterization techniques. The scanning electron micrographs (SEM) reveal that the as-prepared NiO nanoparticles are well connected and stuck with the MnO2 nanowires. The transmission electron microscopy (TEM) analysis showed an increase in the interplanar spacing due to the incorporation of NiO nanoparticles. The different structural parameters of MnO2/NiO nanocomposites were also found to vary with the concentration of NiO. The MnO2/NiO nanocomposites provide an improved electrochemical performance together with a specific capacitance as high as 343 F/g at 1.25 A/g current density. The electrochemical spectroscopic analysis revealed a reduction in charge transfer resistance due to the introduction of NiO, indicating a rapid carrier transportation between the materials interface. The improved electrochemical performance of MnO2/NiO can be attributed to good interfacial interaction, a large interlayer distance, and low charge transfer resistance. The unique features of MnO2/NiO and the cost-effective hydrothermal method will open up a new route for the fabrication of a promising supercapacitor electrode.
ABSTRACT
In this work, Co3O4 nanoparticle-decorated MoS2 (MoS2@Co3O4) hetero-nanoflowers were synthesized by a facile hydrothermal method, and the effect of Co3O4 on the morphological, structural, optical, electronic, and photocatalytic properties of MoS2 was analyzed. The surface morphology of MoS2 and MoS2@Co3O4 was studied via field emission electron microscopy (FE-SEM) and transmission electron microscopy (TEM), which revealed a strong interaction between the MoS2 nanoflower and the nanoparticles. The X-ray diffraction pattern showed a decrease in the crystallite sizes from 7.35 nm to 6.26 nm due to the incorporation of Co3O4. The UV-Vis spectroscopy of the analysis revealed that the indirect band gap of MoS2 was reduced from 1.89 eV to 1.65 eV with the incorporation of Co3O4 nanoparticles. Density functional theory (DFT) calculations were used to investigate the electronic properties of MoS2 and MoS2@Co3O4 hetero-nanoflowers, which also showed a reduction in the electronic band gap for the Co3O4 nanoparticles that were injected. The presence of defect states was also observed in the electronic property of MoS2@Co3O4. The photocatalytic activity of the prepared composite and nanoflower is studied using an aqueous solution of methylene blue (MB), and the efficiencies are found to be 27.96% for MoS2 and 78.89% for MoS2@Co3O4. The improved photocatalytic efficiency of MoS2@Co3O4 hetero-nanoflower can be attributed to narrowing the band gap together with the creation of defect states by the injection of nanoparticles that slows down electron-hole recombination rate by trapping charge carrier. The degradation analysis of the composite provides a new route for the purification of polluted water.
ABSTRACT
Clubroot, caused by Plasmodiophora brassicae, is an important disease of brassica crops worldwide. Vegetable turnip (Brassica rapa L.) have proven to be a source of clubroot resistance genes effective against many pathotypes of P. brassicae. The F1 progeny from the cross B. rapa canola ACDC (susceptible, S) × B. rapa turnip ECD02 (resistant, R) were backcrossed with ACDC, then self-pollinated to produce BC1 S1 lines. All the F1 plants were resistant to four pathotypes (3A, 3D, 3H, and 5X) of P. brassicae. Segregation for R and S in BC1 to each pathotype was 1:1 and resistance reactions were highly correlated. From whole genome sequencing, 192.1 M sequences with 96% template coverage from ECD02, and 478.9 M sequences with 92% coverage from ACDC, were aligned with the reference genome of B. rapa. Genotyping-by-sequencing was performed on the BC1 population. The number of aligned short reads per plant in the BC1 ranged from 1.4 to 8.5 M sequences with 4-8% template coverage. We obtained 1,344 high-quality single-nucleotide polymorphism (SNP) loci with a mean missing rate at 0.27% and distributed them on 10 chromosomes. A single co-localized quantitative trait loci (QTL), designated as Rcr9ECD02 on chromosome A08, conferred resistance to the four pathotypes. The QTL explained 68.9-74.4% of phenotypic variation with the logarithm of the odds values of 24.3 to 31.1. Bulked segregant analysis was performed, and 14 SNP markers linked to the gene were developed using the Kompetitive Allele Specific PCR. Rcr9ECD02 was mapped into an interval of 2.2 cM, flanked by CF_A08_10664692 and CF_A08_12230973, which spanned 1.51 Mb on the chromosome and included 219 B. rapa genes. Four of these genes (BraA08g012910.3C, BraA08g012920.3C, BraA08g013130.3C, and BraA08g013630.3C) encoded disease resistance proteins.
Subject(s)
Brassica napus , Brassica rapa , Plasmodiophorida , Brassica rapa/genetics , Brassica napus/genetics , Plant Diseases/genetics , GenomicsABSTRACT
Thermoelectric (TE) materials based on earth-abundant and non-toxic elements are very useful in cost-effective and eco-friendly waste heat management systems. The constituents of SrGaSnH are earth-abundant and non-toxic, thus we have chosen SrGaSnH to study its structural stability and thermoelectric properties by using density functional theory (DFT), density functional perturbation theory (DFPT), and semi-classical Boltzmann transport theory. Our elastic and phonons calculations show that the compound has good structural stability. The electronic structure calculation discloses that it is an indirect bandgap (0.63 eV by mBJ potential including spin-orbit coupling (SOC) effect) semiconductor. Light band hole effective mass leads to higher electrical conductivity along the x-axis than that of along the z-axis. On the other side, the weak phonon scattering leads to high lattice thermal conductivity â¼ 6.7 W m-1 K-1 at 300 K. Although the power factor (PF) is very high along the x-axis (above 10 mW m-1 K-2 at 300 K), such large κ l dramatically reduces ZT. The maximum values of in-plane and cross-plane ZT are â¼1 (n-type), 0.8 (p-type) and 0.6 (n-type), (0.2 p-type) at 700 K, respectively. The present study has revealed that this compound has strong potential in eco-friendly TE applications.
ABSTRACT
RATIONALE: Soluble guanylate cyclase (sGC) heme iron, in its oxidized state (Fe3+), is desensitized to NO and limits cGMP production needed for downstream activation of protein kinase G-dependent signaling and blood vessel dilation. OBJECTIVE: Although reactive oxygen species are known to oxidize the sGC heme iron, the basic mechanism(s) governing sGC heme iron recycling to its NO-sensitive, reduced state remain poorly understood. METHODS AND RESULTS: Oxidant challenge studies show that vascular smooth muscle cells have an intrinsic ability to reduce oxidized sGC heme iron and form protein-protein complexes between cytochrome b5 reductase 3, also known as methemoglobin reductase, and oxidized sGC. Genetic knockdown and pharmacological inhibition in vascular smooth muscle cells reveal that cytochrome b5 reductase 3 expression and activity is critical for NO-stimulated cGMP production and vasodilation. Mechanistically, we show that cytochrome b5 reductase 3 directly reduces oxidized sGC required for NO sensitization as assessed by biochemical, cellular, and ex vivo assays. CONCLUSIONS: Together, these findings identify new insights into NO-sGC-cGMP signaling and reveal cytochrome b5 reductase 3 as the first identified physiological sGC heme iron reductase in vascular smooth muscle cells, serving as a critical regulator of cGMP production and protein kinase G-dependent signaling.
Subject(s)
Cyclic GMP/metabolism , Cytochrome-B(5) Reductase/physiology , Signal Transduction/physiology , Soluble Guanylyl Cyclase/metabolism , Animals , Aorta/drug effects , Aorta/metabolism , Benzoates/pharmacology , Cells, Cultured , Dose-Response Relationship, Drug , Mice , Mice, Inbred C57BL , Muscle, Smooth, Vascular/drug effects , Muscle, Smooth, Vascular/metabolism , Oxidation-Reduction/drug effects , Rats , Signal Transduction/drug effects , Vasodilation/drug effects , Vasodilation/physiologyABSTRACT
8-Nitroguanosine 3',5'-cyclic monophosphate (8-nitro-cGMP) is a nitrated derivative of guanosine 3',5'-cyclic monophosphate (cGMP) formed endogenously under conditions associated with production of both reactive oxygen species and nitric oxide. It acts as an electrophilic second messenger in the regulation of cellular signaling by inducing a post-translational modification of redox-sensitive protein thiols via covalent adduction of cGMP moieties to protein thiols (protein S-guanylation). Here, we demonstrate that 8-nitro-cGMP potentially S-guanylates thiol groups of cGMP-dependent protein kinase (PKG), the enzyme that serves as one of the major receptor proteins for intracellular cGMP and controls a variety of cellular responses. S-Guanylation of PKG was found to occur in a site specific manner; Cys42 and Cys195 were the susceptible residues among 11 Cys residues. Importantly, S-guanylation at Cys195, which is located in the high-affinity cGMP binding domain of PKG, causes persistent enzyme activation as determined by in vitro kinase assay as well as by an organ bath assay. In vivo, S-guanylation of PKG was demonstrated to occur in mice without any specific treatment and was significantly enhanced by lipopolysaccharide administration. These findings warrant further investigation in terms of the physiological and pathophysiological roles of S-guanylation-dependent persistent PKG activation.
Subject(s)
Cyclic GMP-Dependent Protein Kinases/metabolism , Guanine/metabolism , Nucleotides, Cyclic/metabolism , Proteins/metabolism , Animals , Enzyme Activation , In Vitro Techniques , Male , Mice , Mice, Inbred C57BL , Myocardium/enzymology , Myocardium/metabolismABSTRACT
BACKGROUND: Cronobacter sakazakii is considered as an emerging foodborne pathogen. The aim of this study was to isolate and characterize virulent strains of Cronobacter sakazakii from food samples of Bangladesh. RESULT: Six (6) Cronobacter sakazakii was isolated and identified from 54 food samples on the basis of biochemical characteristics, sugar fermentation, SDS-PAGE of whole cell protein, plasmid profile and PCR of Cronobacter spp. specific genes (esak, gluA, zpx, ompA, ERIC, BOX-AIR) and sequencing. These strains were found to have moderately high antibiotic resistance against common antibiotics and some are ESBL producer. Most of the C. sakazakii isolates were capable of producing biofilm (strong biofilm producer), extracellular protease and siderophores, curli expression, haemolysin, haemagglutinin, mannose resistant haemagglutinin, had high cell surface hydrophobicity, significant resistance to human serum, can tolerate high concentration of salt, bile and DNase production. Most of them produced enterotoxins of different molecular weight. The isolates pose significant serological cross-reactivity with other gram negative pathogens such as serotypes of Salmonella spp., Shigella boydii, Shigella sonnei, Shigella flexneri and Vibrio cholerae. They had significant tolerance to high temperature, low pH, dryness and osmotic stress. CONCLUSION: Special attention should be given in ensuring hygiene in production and post-processing to prevent contamination of food with such stress-tolerant virulent Cronobacter sakazakii.
Subject(s)
Cronobacter sakazakii/physiology , Food Microbiology , Milk/microbiology , Stress, Physiological/physiology , Animals , Anti-Bacterial Agents/pharmacology , Bangladesh , Cronobacter sakazakii/classification , Cronobacter sakazakii/isolation & purification , Cronobacter sakazakii/pathogenicity , Cross Reactions , DNA Primers , DNA, Bacterial/analysis , Electrophoresis, Polyacrylamide Gel , Fermentation/physiology , Hot Temperature , Hydrogen-Ion Concentration , Milk/classification , Polymerase Chain Reaction/methods , Sequence Analysis, DNA , Siderophores/metabolism , Spices/microbiology , Tetracycline Resistance/genetics , VirulenceABSTRACT
BACKGROUND: Cronobacter sakazakii is considered as an emerging foodborne pathogen. The aim of this study was to isolate and characterize virulent strains of Cronobacter sakazakii from food samples of Bangladesh. RESULT: Six (6) Cronobacter sakazakii was isolated and identified from 54 food samples on the basis of biochemical characteristics, sugar fermentation, SDS-PAGE of whole cell protein, plasmid profile and PCR of Cronobacter spp. specific genes (esak, gluA, zpx, ompA, ERIC, BOX-AIR) and sequencing. These strains were found to have moderately high antibiotic resistance against common antibiotics and some are ESBL producer. Most of the C. sakazakii isolates were capable of producing biofilm (strong biofilm producer), extracellular protease and siderophores, curli expression, haemolysin, haemagglutinin, mannose resistant haemagglutinin, had high cell surface hydrophobicity, significant resistance to human serum, can tolerate high concentration of salt, bile and DNase production. Most of them produced enterotoxins of different molecular weight. The isolates pose significant serological cross-reactivity with other gram negative pathogens such as serotypes of Salmonella spp., Shigella boydii, Shigella sonnei, Shigella flexneri and Vibrio cholerae. They had significant tolerance to high temperature, low pH, dryness and osmotic stress. CONCLUSION: Special attention should be given in ensuring hygiene in production and post-processing to prevent contamination of food with such stress-tolerant virulent Cronobacter sakazakii.
Subject(s)
Animals , Stress, Physiological/physiology , Cronobacter sakazakii/physiology , Milk/microbiology , Food Microbiology , Bangladesh , Virulence , DNA, Bacterial/analysis , Tetracycline Resistance/genetics , Polymerase Chain Reaction/methods , Spices/microbiology , Siderophores/metabolism , Sequence Analysis, DNA , DNA Primers , Cross Reactions , Cronobacter sakazakii/isolation & purification , Cronobacter sakazakii/classification , Cronobacter sakazakii/pathogenicity , Milk/classification , Electrophoresis, Polyacrylamide Gel , Fermentation/physiology , Hot Temperature , Hydrogen-Ion Concentration , Anti-Bacterial Agents/pharmacologyABSTRACT
The vertebrate globins are a group of hemoproteins with the intrinsic capacity to regulate gaseous ligands and redox signaling required for cardiovascular biology. This graphical review will provide a comprehensive synopsis of somatic cardiovascular globins focusing on expression, function and redox signaling - an emerging area in both physiology and disease.