Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
Add more filters










Database
Language
Publication year range
1.
Niger J Clin Pract ; 26(9): 1215-1225, 2023 Sep.
Article in English | MEDLINE | ID: mdl-37794532

ABSTRACT

Dental implants are considered an ideal treatment for a missing single tooth. Immediate loading of implants can hasten the procedure, providing comfort to the patients. Recently, immediate loading of implants has gained much importance as it helps hasten the procedure and provides more comfort to patients. A previous systematic review published 5 years ago compared the success rates between immediate and conventional loading. There are several factors that influence the success rate of implants that were not discussed in detail in the previous review. Hence, the present systematic review is done to report differences in the outcomes from single implant restorations of missing teeth in the posterior region in patients who were subjected to immediate loading and conventional loading. A follow up for 1 year was done. Electronic databases of Medline, Scopus, and Web of Science were searched for publications in the English Language during May 2021. The search results yielded 306 articles, out of which 225 were excluded based on title and abstract screening. Screening of the remaining 81 full text articles yielded 14 original research articles that satisfied the predefined inclusion criteria. Meta analysis was not possible due to the heterogeneity of the data. The overall success rate of the immediate loading of a single implant is 94.31%. Implants in the maxillary region had a higher survival rate than those in the mandibular region. The age range between 18 and 80 years showed good prognosis and outcomes in older individuals. Good oral hygiene was emphasized for all patients to prevent any secondary conditions or delays in healing.


Subject(s)
Anodontia , Dental Implants , Immediate Dental Implant Loading , Tooth Loss , Adolescent , Adult , Aged , Aged, 80 and over , Humans , Middle Aged , Young Adult , Dental Prosthesis, Implant-Supported , Immediate Dental Implant Loading/methods , Tooth Loss/surgery
2.
Niger J Clin Pract ; 26(6): 666-673, 2023 Jun.
Article in English | MEDLINE | ID: mdl-37470637

ABSTRACT

Background and Aim: Various methods to accelerate the orthodontic tooth movement have been used, among which corticotomy is considered to be the most common one. The suggested reasoning for such acceleration was the regional acceleratory phenomenon (RAP). Since the RAP is a property of both the hard and soft tissues, we designed a soft tissue flap procedure to compare the effects with the conventional corticotomy procedure. A split-mouth study was conducted where the two procedures were assessed in a single participant. Patients and Methods: The total sample size was calculated to be 40 with 20 participants in each group. The rate of tooth movement was the primary outcome measure, and the secondary outcomes were dentoalveolar changes, which were studied in both the conventional corticotomy and the flap-only procedure based on a cone-beam computed tomography (CBCT) wherein the alveolar bone density (BD) around canines, tipping, and rotational changes in canines, premolars, and molars were assessed. Results: Corticotomy resulted in greater canine angulation, lesser canine rotation and premolar rotation, and greater molar rotation compared with flap elevation, but these differences were statistically insignificant. Conclusion: Though the corticotomy resulted in higher BD, the differences were statistically insignificant. There was no significant difference in the rate of space closure assessed by the two techniques compared.


Subject(s)
Mouth , Tooth Movement Techniques , Humans , Tooth Movement Techniques/methods
3.
Niger J Clin Pract ; 24(6): 866-873, 2021 Jun.
Article in English | MEDLINE | ID: mdl-34121735

ABSTRACT

AIM: To evaluate the effect of prosthetic framework material and cantilever length on peri-implant strain in mandibular all-on-four implant-supported prostheses with different types of arch antagonist forces. MATERIALS AND METHODS: Models simulating a completely edentulous mandibular arch fabricated in heat-cured acrylic resin were used. On the acrylic models, four implants were placed at regions 34, 32, 42, and 44 simulating all-on-four implant placements. Implant-supported screw-retained fixed prosthesis frameworks were fabricated using three different materials (cobalt-chromium, zirconia, and polyetheretherketone) and with three different cantilever lengths (zero mm, 15 mm, and 25 mm). Strain gauges were attached on the model at the buccal and lingual positions of each implant. Forces simulating opposing natural dentition, conventional complete denture, and the parafunctional habit were applied to the models. The peri-implant strain in each strain gauge was recorded. RESULTS: Least peri-implant strains (67 microstrains) were observed when forces simulating conventional complete dentures were applied on the models and the highest peri-implant strains (9091 microstrains) were observed when forces simulating parafunctional habit were applied. One-way ANOVA test followed by Tukey's post hoc analysis was performed to compare the mean deformation scores between different materials at 50 N load. The level of significance [P-value] was set at P < 0.05. Tests showed significant differences between zero mm and the other types in all the different materials, and also between 1.5 x AP and 2.5 x AP for Zirconia and Peek material at P = 0.02 & P = .008, respectively. The results showed that the type of framework material, cantilever length, and occlusal forces from the opposing arch influence the peri-implant strain in the bone in all-on-four implant-supported prostheses. CONCLUSION: Rehabilitation of a single, completely edentulous arch with implant-supported prostheses should consider the situation of the opposing arch. The choice of framework material, as well as the cantilever length, should be altered based on the forces from the opposing arch.


Subject(s)
Dental Implants , Denture, Complete , Acrylic Resins , Bite Force , Bone Screws , Dental Prosthesis, Implant-Supported , Humans , Mandible/surgery
4.
Niger J Clin Pract ; 23(4): 568-573, 2020 Apr.
Article in English | MEDLINE | ID: mdl-32246667

ABSTRACT

OBJECTIVES: The applied orthodontic force causes remodeling of the periodontium through the selective release of cytokines causing resorption of bone, enabling controlled movement of the tooth. This study compared the cytokine profile between patients treated with conventional labial and lingual fixed orthodontic appliances. PATIENTS AND METHODS: The study included 80 patients in need of orthodontic treatment, out of which 40 patients were treated by the labial fixed appliance and 40 by the lingual fixed appliance. Gingival crevicular fluid (GCF) specimens were gathered from both the groups using a microcapillary pipette. The samples were collected at the beginning of the treatment and after 21 days. Enzyme-linked immunosorbent assay was performed to evaluate the cytokine levels. RESULTS: Interleukin (IL)-1α, 1ß, 2, 8, and tumor necrosis factor-alpha (TNF-α) levels were significantly high (P < 0.001) in GCF of participants treated with conventional labial fixed appliance. IL-1α, 1ß, 2, 6, 8, and TNF-α levels were significantly high (P < 0.001) in GCF of participants treated by the lingual fixed appliance. The concentrations of TNF-α and IL-1ß were increased higher than other cytokines in both the treatment groups. CONCLUSION: Overall, the lingual fixed appliance had higher cytokine levels than a labial fixed appliance. Analyzing the GCF cytokine levels during orthodontic treatment could provide an ideal platform for monitoring the progress of the treatment.


Subject(s)
Bone Remodeling/physiology , Bone and Bones/metabolism , Cytokines/analysis , Orthodontic Appliances, Fixed/statistics & numerical data , Biomarkers/analysis , Gingival Crevicular Fluid/chemistry , Humans
5.
Niger J Clin Pract ; 23(2): 179-188, 2020 Feb.
Article in English | MEDLINE | ID: mdl-32031092

ABSTRACT

AIMS: The present study aimed at assessing two fixed points of reference from where the mesial and distal point of all rugae can be measured so that the exact movement of particular rugae in any direction can be evaluated and assessing the changes in the palatal rugae after orthodontic treatment. METHODS: A longitudinal study conducted among a sample of 20 (8 male and 12 female) adult patients. Pre- and post-orthodontic treatment casts of patients were obtained from the Department of Orthodontics College of Dentistry Jazan University. Antero-posterior linear distances (Technique I) between medial and lateral points of primary, secondary and tertiary rugae were measured. Also, the transverse linear distance (Technique II) between medial and lateral points of right and left rugae were measured. Technique III involved marking two fixed points and using these two points a third point is located on the medial or lateral end of rugae of right and left side in pre and post-treatment orthodontic casts. The independent sample t-test was employed to compare gender. Difference between the pre- and post-treatment mean values were checked by the paired t-test. RESULTS: Technique III successfully showed the statistically significant difference (P ≤ 0.05, 95% CI) in the overall pre and post-treatment values on the patients' cast (N = 20) which was not observed with a technique I and technique II. CONCLUSION: The triangle created by the three reference points in the technique III was able to identify the changes in the palatine rugae more precisely than the technique I and Technique II.


Subject(s)
Anthropometry/methods , Dental Casting Technique/standards , Mouth Mucosa/anatomy & histology , Orthodontics/standards , Palate, Hard , Palate/anatomy & histology , Adolescent , Adult , Female , Forensic Sciences , Humans , Longitudinal Studies , Male , Treatment Outcome , Young Adult
SELECTION OF CITATIONS
SEARCH DETAIL
...