ABSTRACT
Starch and its derivatives have recently emerged as a sustainable and renewable alternative for petroleum-based expanded polystyrene (EPS) and expanded polypropylene (EPP) foam materials. In this study, biodegradable foam materials were prepared from cassava starch using a novel dual modification technique, combining microwave treatment and freeze-drying. The foam materials were prepared from starch solutions microwaved over different intervals. The starch-based foam materials were characterized using Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM), 13C nuclear magnetic resonance (13C-NMR) spectroscopy, and compression set test. Moreover, the water absorption capacities and density values of the foam materials were measured according to ASTM standards. The biodegradability test was carried out according to the aerobic compost environment test. The lowest water absorption capacities of 65.56% and 70.83% were exhibited for the cassava starch foam sample (MWB) prepared at a 20 s microwave treatment time and immersed in distilled water for 2 and 24 h, respectively. Furthermore, the lightweight cassava starch-based foam materials displayed density ranging from 124 to 245 kg/m3. The biodegradation test exhibited significant biodegradation of over 50% after 15 days for all the foam materials prepared. These results suggest that the dual-modified cassava starch-based biodegradable foams show potential in sustainable packaging applications by replacing petroleum-based materials.
ABSTRACT
Starch is one of the most common biodegradable polymers found in nature, and it is widely utilized in the food and beverage, bioplastic industry, paper industry, textile, and biofuel industries. Starch has received significant attention due to its environmental benignity, easy fabrication, relative abundance, non-toxicity, and biodegradability. However, native starch cannot be directly used due to its poor thermo-mechanical properties and higher water absorptivity. Therefore, native starch needs to be modified before its use. Major starch modification techniques include genetic, enzymatic, physical, and chemical. Among those, chemical modification techniques are widely employed in industries. This review presents comprehensive coverage of chemical starch modification techniques and genetic, enzymatic, and physical methods developed over the past few years. In addition, the current applications of chemically modified starch in the fields of packaging, adhesives, pharmaceuticals, agriculture, superabsorbent and wastewater treatment have also been discussed.
Subject(s)
Plants/chemistry , Starch/chemistry , Biocatalysis , Biotechnology , Cross-Linking Reagents/chemistry , Esterification , Genetic Engineering , Hydrolysis , Plants/genetics , Starch/geneticsABSTRACT
The present study aimed to envisage the effect of physicochemical properties on the performance of Gliricidia sepium biochar (GBC) pyrolyzed at 300, 500, and 700 °C in the removal caffeine (CFN); a pharmaceutical and personal care product, from water. The physicochemical properties of GBC were characterized by proximate and ultimate analysis, BET, SEM, FTIR, and Raman spectroscopy. The adsorption batch experiment was carried out at various pH values (pH 3-10), mixing times (up to 24 h), and initial CFN concentration (10-500 mg/L). The FTIR analysis revealed the loss of polar functional groups on the surface of GBC derived at high temperatures. The red-shifted and blue-shifted Raman peaks indicate the condensation of small molecules on GBC. The GBC derived at 700 °C demonstrated high CFN adsorption capacity (16.26 mg/g) due to its high surface area and aromaticity. The highest adsorption of CFN was occurred at acidic pH range from 3.5 to 4.5 due to the existence of non-specific attraction between CFN and GBC. The kinetics and isotherm experimental data were fitted with Elovich and fractional power kinetic regression, Freundlich, and Temkin isotherm models, which suggested the adsorption of CFN on the GBC by mixed mechanisms; physisorption and chemisorption including π-π interactions, hydrogen bonding, n-π interactions, electrostatic attraction, and electron donor-acceptor attraction. Moreover, both surface area and aromaticity index have demonstrated a high positive correlation for CFN adsorption, signifying the importance of controlling physicochemical properties based on the end-user purpose of biochar.
Subject(s)
Pyrolysis , Water Pollutants, Chemical , Adsorption , Caffeine , Charcoal , Hydrogen-Ion Concentration , Kinetics , TemperatureABSTRACT
Xylitol, a sugar substitute frequently used in sugar-free gum, is generally considered harmless to humans but it can be extremely toxic to dogs. Dog-owning customers are becoming increasingly aware of the risks associated with xylitol-containing chewing gums. However, there remains some uncertainty if these chewing gums are still dangerous to dogs after they have been partially consumed. In this work, a reliable low-cost analytical method has been developed to quantify the xylitol in sugar-free gum samples. Xylitol was extracted from gum samples using water as a solvent. Extractions were analyzed by GC-MS with direct aqueous injection (DAI). This method was successfully applied to over 120 samples including fresh gum and 5 min, 15 min, and 30 min chewed gum samples.
ABSTRACT
A regioselective synthesis of 6-alkyl- and 6-aryluracils was developed by the dimerization of 3-alkyl- and 3-aryl-2-propynamides promoted by either Cs2CO3 or K3PO4. A range of 3-aryl-2-propynamides, with both electron-deficient and electron-rich 3-aryl substituents, were successfully reacted in high yields. Cs+ acts as a soft Lewis acid to polarize the carbon-carbon triple bond, and solid K3PO4 interacts with carbonyl oxygen, promoting intermolecular nucleophilic attack by the only weakly nucleophilic amide nitrogen. Experiments were conducted to support the proposed mechanism.