Evaluation of two transposases for improving expression of recombinant proteins in Chinese hamster ovary cell stable pools by co-transfection and supertransfection approaches.

Transposons are genetic elements capable of cutting and pasting genes of interest via the action of a transposase and offer many advantages over random or targeted integration of DNA in the creation of Chinese hamster ovary (CHO) cell lines for recombinant protein expression. Unique transposases have different recognition sites, allowing multiple transposases to be co-transfected together. They also allow for supertransfection (transfection on a previously transfected pool or cell line) with a second transposase to integrate additional copies of the same gene or an additional gene without disruption of the previously integrated DNA which to our knowledge has not been previously described in literature. Two fluorescent proteins, EGFP and tagRFP657, were either co-transfected or supertransfected into CHO cells using two unique transposases and showed high expression efficiency with similar expression levels (measured as mean fluorescence intensity), regardless of whether the genes were co-transfected or supertransfected onto an existing stable pool. Additionally, dual selection of the genes, both in the absence of L-glutamine and the presence of puromycin, led to higher expression levels than single selection alone. These results demonstrate that supertransfection using unique transposases could be a useful strategy for increasing titers of existing cell lines or for overexpressing helper (non-therapeutic) genes to improve expression and/or product quality of existing pools and cell lines, potentially saving significant time and resources.

PEI-Mediated Transient Gene Expression in CHO Cells.

We describe a method for polyethyleneimine (PEI)-mediated transient transfection of suspension-adapted Chinese hamster ovary (CHO-DG44) cells for protein expression applicable at scales from 2 mL to 2 L. The method involves transfection at a high cell density (5 × 106 cells/mL) by direct addition of plasmid DNA (pDNA) and PEI to the culture and subsequent incubation at 31 °C with agitation by orbital shaking. This method requires 0.3 mg/L of coding pDNA, 2.7 mg/L of nonspecific (filler) DNA, and 15 mg/L of PEI. The production phase is performed at 31 °C in the presence of 0.25% N,N-dimethylacetamide (DMA). If desired, the method can be modified to avoid use of DMA by increasing the amount of coding DNA. We also provide information on culture vessel options, recommended working volumes, and recommended shaking speeds for transfections at scales from 2 mL to 2 L.

Rescue of a lysosomal storage disorder caused by Grn loss of function with a brain penetrant progranulin biologic.

GRN mutations cause frontotemporal dementia (GRN-FTD) due to deficiency in progranulin (PGRN), a lysosomal and secreted protein with unclear function. Here, we found that Grn-/- mice exhibit a global deficiency in bis(monoacylglycero)phosphate (BMP), an endolysosomal phospholipid we identified as a pH-dependent PGRN interactor as well as a redox-sensitive enhancer of lysosomal proteolysis and lipolysis. Grn-/- brains also showed an age-dependent, secondary storage of glucocerebrosidase substrate glucosylsphingosine. We investigated a protein replacement strategy by engineering protein transport vehicle (PTV):PGRN-a recombinant protein linking PGRN to a modified Fc domain that binds human transferrin receptor for enhanced CNS biodistribution. PTV:PGRN rescued various Grn-/- phenotypes in primary murine macrophages and human iPSC-derived microglia, including oxidative stress, lysosomal dysfunction, and endomembrane damage. Peripherally delivered PTV:PGRN corrected levels of BMP, glucosylsphingosine, and disease pathology in Grn-/- CNS, including microgliosis, lipofuscinosis, and neuronal damage. PTV:PGRN thus represents a potential biotherapeutic for GRN-FTD.

PEI-Mediated Transient Gene Expression in CHO Cells.

We describe a method for polyethyleneimine (PEI) mediated transient transfection of suspension-adapted Chinese hamster ovary (CHO-DG44) cells for protein expression applicable at scales from 2 mL to 2 L. The method involves transfection at a high cell density (5 × 106 cells/mL) by direct addition of plasmid DNA (pDNA) and PEI to the culture and subsequent incubation at 31 °C with agitation by orbital shaking. This method requires 0.3 mg/L of coding pDNA, 2.7 mg/L of nonspecific (filler) DNA and 15 mg/L of PEI. The production phase is performed at 31 °C in the presence of 0.25% N,N-dimethylacetamide (DMA). We also provide information on culture vessel options, recommended working volumes, and recommended shaking speeds for transfections at scales from 2 mL to 2 L.

Polymer-mediated flocculation of transient CHO cultures as a simple, high throughput method to facilitate antibody discovery.

Most biopharmaceutical drugs, especially monoclonal antibodies (mAbs), bispecific antibodies (BsAbs) and Fc-fusion proteins, are expressed using Chinese Hamster Ovary (CHO) cell lines. CHO cells typically yield high product titers and high product quality. Unfortunately, CHO cell lines also generate high molecular weight (HMW) aggregates of the desired product during cell culture along with CHO host cell protein (HCP) and CHO DNA. These immunogenic species, co-purified during Protein A purification, must be removed in a multi-step purification process. Our colleagues have reported the use of a novel polymer-mediated flocculation step to simultaneously reduce HMW, HCP and DNA from stable CHO cell cultures prior to Protein A purification. The objective of this study was to evaluate this novel "smart polymer" (SmP) in a high throughput antibody discovery workflow using transiently transfected CHO cultures. SmP treatment of 19 different molecules from four distinct molecular categories (human mAbs, murine mAbs, BsAbs and Fabs) with 0.1% SmP and 25 mM stimulus resulted in minimal loss of monomeric protein. Treatment with SmP also demonstrated a variable, concentration-dependent removal of HMW aggregates after Protein A purification. SmP treatment also effectively reduced HCP levels at each step of mAb purification with final HCP levels being several fold lower than the untreated control. Interestingly, SmP treatment was able to significantly reduce high concentrations of artificially spiked levels of endotoxin in the cultures. In summary, adding a simple flocculation step to our existing transient CHO process reduced the downstream purification burden to remove impurities and improved final product quality. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1393-1400, 2017.

Large-Scale Transient Transfection of Chinese Hamster Ovary Cells in Suspension.

We describe a one-liter transfection of suspension-adapted Chinese hamster ovary (CHO-DG44) cells using polyethyleneimine (PEI) for DNA delivery. The method involves transfection at a high cell density (5 × 106 cells/mL) by direct addition of plasmid DNA (pDNA) and PEI to the culture and subsequent incubation at 31 °C with agitation by orbital shaking. We also describe an alternative method in which 90% of the pDNA is replaced by nonspecific (filler) DNA, and the production phase is performed at 31 °C in the presence of 0.25% N, N-dimethylacetamide (DMA).

Evaluation of piggyBac-mediated CHO pools to enable material generation to support GLP toxicology studies.

Generating purified protein for GLP toxicology studies (GLP-Tox) represents an important and often rate limiting step in the biopharmaceutical drug development process. Toxicity testing requires large amounts of therapeutic protein (>100 g), typically produced in a single 500-2,500 L bioreactor, using the final CHO clonally derived cell line (CDCL). One approach currently used to save time is to manufacture GLP-Tox material using pools of high-producing CHO CDCLs instead of waiting for the final CDCL. Recently, we reported CHO pools producing mAb titers >7 g/L using piggyBac-mediated gene integration (PB CHO pools). In this study, we wanted to leverage high titer PB CHO pools to produce GLP-Tox material. A detailed product quality attribute (PQA) assessment was conducted comparing PB CHO pools to pooled Top4 CDCLs. Four mAbs were evaluated. First, we found that PB CHO pools expressed all four mAbs at high titers (2.8-4.4 g/L in shake flasks). Second, all four PB CHO pools were aged to 55 generations (Gen). All four PB CHO Pools were found to be suitable over 55 Gen. Finally, we performed bioreactor scale-up. PB CHO pool titers (3.7-4.8 g/L) were similar or higher than the pooled Top 4 CDCLs in 5 L bioreactors (2.4-4.1 g/L). The PQAs of protein derived from PB CHO pools were very similar to pooled Top 4 CHO CDCLs according to multiple orthogonal techniques including peptide mapping analysis. Taken together, these results demonstrate the technical feasibility of using PB CHO pools to manufacture protein for GLP-Tox. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1436-1448, 2017.

Bioreactor scale up and protein product quality characterization of piggyBac transposon derived CHO pools.

Chinese hamster ovary (CHO) cells remain the most popular host for the production of biopharmaceutical drugs, particularly monoclonal antibodies (mAbs), bispecific antibodies, and Fc-fusion proteins. Creating and characterizing the stable CHO clonally-derived cell lines (CDCLs) needed to manufacture these therapeutic proteins is a lengthy and laborious process. Therefore, CHO pools have increasingly been used to rapidly produce protein to support and enable preclinical drug development. We recently described the generation of CHO pools yielding mAb titers as high as 7.6 g/L in a 16 day bioprocess using piggyBac transposon-mediated gene integration. In this study, we wanted to understand why the piggyBac pool titers were significantly higher (2-10 fold) than the control CHO pools. Higher titers were the result of a combination of increased average gene copy number, significantly higher messenger RNA levels and the homogeneity (i.e. less diverse population distribution) of the piggyBac pools, relative to the control pools. In order to validate the use of piggyBac pools to support preclinical drug development, we then performed an in-depth product quality analysis of purified protein. The product quality of protein obtained from the piggyBac pools was very similar to the product quality profile of protein obtained from the control pools. Finally, we demonstrated the scalability of these pools from shake flasks to 36L bioreactors. Overall, these results suggest that gram quantities of therapeutic protein can be rapidly obtained from piggyBac CHO pools without significantly changing product quality attributes. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:534-540, 2017.

Transient and stable CHO expression, purification and characterization of novel hetero-dimeric bispecific IgG antibodies.

IgG bispecific antibodies (BsAbs) represent one of the preferred formats for bispecific antibody therapeutics due to their native-like IgG properties and their monovalent binding to each target. Most reported studies utilized transient expression in HEK293 cells to produce BsAbs. However, the expression of biotherapeutic molecules using stable CHO cell lines is commonly used for biopharmaceutical manufacturing. Unfortunately, limited information is available in the scientific literature on the expression of BsAbs in CHO cell lines. In this study we describe an alternative approach to express the multiple components of IgG BsAbs using a single plasmid vector (quad vector). This single plasmid vector contains both heavy chain genes and both light chain genes required for the expression and assembly of the IgG BsAb, along with a selectable marker. We expressed, purified, and characterized four different IgG BsAbs or "hetero-mAbs" using transient CHO expression and stable CHO minipools. Transient CHO titers ranged from 90 to 160 mg/L. Stable CHO titers ranged from 0.4 to 2.3 g/L. Following a simple Protein A purification step, the percentage of correctly paired BsAbs ranged from 74% to 98% as determined by mass spectrometry. We also found that information generated from transient CHO expression was similar to information generated using stable CHO minipools. In conclusion, the quad vector approach represents a simple, but effective, alternative approach for the generation of IgG BsAbs in both transient CHO and stable CHO expression systems. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:469-477, 2017.

Generation of stable Chinese hamster ovary pools yielding antibody titers of up to 7.6 g/L using the piggyBac transposon system.

Chinese hamster ovary (CHO) cells remain the default production host for many biopharmaceutical drugs, particularly monoclonal antibodies (mAb). Production of gram and kilogram quantities of protein typically requires the generation of stable CHO clones. Unfortunately, this process takes several months, significantly slowing down the drug discovery and development process. Therefore, improved technologies are needed to accelerate biopharmaceutical drug discovery and final drug substance manufacturing. In this study, we describe the generation of stable CHO pools using the piggyBac transposon system. We evaluated the system using four model antibody molecules (3 mAbs and 1 bispecific Ab). Stable CHO pools were isolated in 7-12 days. Using a simple 16-day fed-batch process, we measured titers ranging from 2.3 to 7.6 g/L for the four model antibodies. This represented a 4- to 12-fold increase relative to the controls. Additionally, we isolated stable CHO clones. We found that the stable CHO clones isolated from the piggyBac transposon pools yielded titers two to threefold higher relative to the control clones. Taken together, these results suggest that stable CHO pool and clone generation can be significantly improved by using the piggyBac transposon system. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1301-1307, 2016.

Comparison of three transposons for the generation of highly productive recombinant CHO cell pools and cell lines.

Several naturally occurring vertebrate transposable elements have been genetically modified to enable the transposition of recombinant genes in mammalian cells. We compared three transposons-piggyBac, Tol2, and Sleeping Beauty-for their ability to generate cell pools (polyclonal cultures of recombinant cells) and clonal cell lines for the large-scale production of recombinant proteins using Chinese hamster ovary cells (CHO-DG44) as the host. Transfection with each of the dual-vector transposon systems resulted in cell pools with volumetric yields of tumor necrosis factor receptor-Fc fusion protein (TNFR:Fc) that were about ninefold higher than those from cell pools generated by conventional plasmid transfection. On average, the cell pools had 10-12 integrated copies of the transgene per cell. In the absence of selection, the volumetric productivity of the cell pools decreased by 50% over a 2-month cultivation period and then remained constant. The average volumetric TNFR:Fc productivity of clonal cell lines recovered from cell pools was about 25 times higher than that of cell lines generated by conventional transfection. In 14-day fed-batch cultures, TNFR:Fc levels up to 900 mg/L were obtained from polyclonal cell pools and up to 1.5 g/L from clonal cell lines using any of the three transposons. Biotechnol. Bioeng. 2016;113: 1234-1243. © 2015 Wiley Periodicals, Inc.

Enhanced plasmid DNA utilization in transiently transfected CHO-DG44 cells in the presence of polar solvents.

Although the protein yields from transient gene expression (TGE) with Chinese hamster ovary (CHO) cells have recently improved, the amount of plasmid DNA (pDNA) needed for transfection remains relatively high. We describe a strategy to reduce the pDNA amount by transfecting CHO-DG44 cells with 0.06 µg pDNA/10(6) cells (10% of the optimal amount) in the presence of nonspecific (filler) DNA and various polar solvents including dimethylsufoxide, dimethyl formamide, acetonitrile, dimethyl acetamide (DMA), and hexamethyl phosphoramide (HMP). All of the polar solvents with the exception of HMP increased the production of a recombinant antibody in comparison to the untreated control transfection. In the presence of 0.25% DMA, the antibody yield in a 7-day batch culture was 500 mg/L. This was fourfold higher than the yield from the untreated control transfection. Mechanistic studies revealed that the polar solvents did not affect polyethylenimine-mediated pDNA delivery into cells or nuclei. The steady-state transgene mRNA level was elevated in the presence of each of the polar solvents tested, while the transgene mRNA half-life remained the same. These results indicated that the polar solvents enhanced transgene transcription. When screening a panel of recombinant antibodies and Fc-fusion proteins for production in the presence of the polar solvents, the highest increase in yield was observed following DMA addition for 11 of the 12 proteins. These results are expected to enhance the applicability of high-yielding TGE processes with CHO-DG44 cells by decreasing the amount of pDNA required for transfection.

Transcriptional and post-transcriptional targeting for enhanced transient gene expression in CHO cells.

OBJECTIVE: To develop a simple approach to increase titers of transient gene expression in CHO cells without relying on host cell line engineering as recent reports suggest that for PEI-mediated transfections, under optimized conditions, DNA delivery into cells and nuclei is not the limiting factor. RESULTS: N, N-Dimethyl acetamide (DMA) was utilized to enhance transcription. To target post-transcriptional events, we evaluated the co-expression of various genes involved in the unfolded protein response, namely XBP1S, ATF4, CHOP and HSPA5. XBP1S overexpression led to a 15-85 % increase in titer for multiple therapeutic proteins. Mechanistic studies confirmed that addition of 0.125 % DMA increased transgene mRNA levels as expected. However, overexpression of XBP1S had no effect on transgene mRNA levels, indicating that it influenced post-transcriptional events. Since DMA and XBP1S targeted different pathways, the combination of the two approaches led to an additive improvement in protein titer (150-250 % titer increase). CONCLUSION: Transcriptional and post-transcriptional pathways of transient gene expression can be targeted to increase titers without resorting to host cell line engineering in a simple, short, 7 day production process.

Transcriptional and post-transcriptional limitations of high-yielding, PEI-mediated transient transfection with CHO and HEK-293E cells.

Transient gene expression (TGE) in human embryonic kidney (HEK-293) and Chinese hamster ovary (CHO) cells is a well-established technology for the rapid generation of recombinant proteins. Although the maximum TGE yields have reached 1 g/L or more, the amount of plasmid DNA (pDNA) required for transfection remains high. Although greater than 10(3) copies of pDNA are present per transfected cell, protein yields are still lower than those achieved in recombinant cell lines with only one or a few copies of the transgene. This indicates a clear limitation to TGE in terms of the maximum level of recombinant protein production. In this study, we investigated the limitations to high-yielding TGE processes with CHO and HEK-293E cells using a monoclonal antibody as a model protein. For either cell host, both the intracellular and intranuclear pDNA levels increased linearly with the amount of pDNA added to the culture. In contrast, transgene mRNA accumulation reached a plateau as the intranuclear pDNA amount increased, suggesting a limitation in pDNA transcription. A post-transcriptional limitation to TGE yields was revealed by calculating the amount of antibody produced per transgene mRNA (mRNA utilization). For both hosts the transgene mRNA utilization decreased dramatically when transfected pDNA amounts increased beyond the level giving the maximum protein yield. The post-transcriptional limitation did not appear to be due to bottlenecks in antibody assembly or secretion, suggesting that transgene mRNA translation may be limiting. The results show that TGE yields are not limited by pDNA delivery into the nuclei, but in pDNA and transgene mRNA utilization.

High-throughput mAb expression and purification platform based on transient CHO.

A high-cell-density transient transfection system was recently developed in our laboratory based on a CHO-GS-KO cell line. This method yields monoclonal antibody titers up to 350 mg/L from a simple 7-day process, in volumes ranging from 2 mL to 2 L. By performing transfections in 24-deep-well plates, a large number of mAbs can be expressed simultaneously. We coupled this new high-throughput transfection process to a semiautomated protein A purification process. Using a Biomek FX(p) liquid handling robot, up to 72 unique mAbs can be simultaneously purified. Our primary goal was to obtain >0.25 mg of purified mAb at a concentration of >0.5 mg/mL, without any concentration or buffer-exchange steps. We optimized both the batch-binding and the batch elution steps. The length of the batch-binding step was important to minimize mAb losses in the flowthrough fraction. The elution step proved to be challenging to simultaneously maximize protein recovery and protein concentration. We designed a variable volume elution strategy based on the average supernatant titer. Finally, we present two case studies. In the first study, we produced 56 affinity maturation mAb variants at an average yield of 0.33 ± 0.05 mg (average concentration of 0.65 ± 0.10 mg/mL). In a second study, we produced 42 unique mAbs, from an early-stage discovery effort, at an average yield of 0.79 ± 0.31 mg (average concentration of 1.59 ± 0.63 mg/mL). The combination of parallel high-yielding transient transfection and semiautomated high-throughput protein A purification represents a valuable mAb drug discovery tool.

A high cell density transient transfection system for therapeutic protein expression based on a CHO GS-knockout cell line: process development and product quality assessment.

Transient gene expression (TGE) is a rapid method for the production of recombinant proteins in mammalian cells. While the volumetric productivity of TGE has improved significantly over the past decade, most methods involve extensive cell line engineering and plasmid vector optimization in addition to long fed batch cultures lasting up to 21 days. Our colleagues have recently reported the development of a CHO K1SV GS-KO host cell line. By creating a bi-allelic glutamine synthetase knock out of the original CHOK1SV host cell line, they were able to improve the efficiency of generating high producing stable CHO lines for drug product manufacturing. We developed a TGE method using the same CHO K1SV GS-KO host cell line without any further cell line engineering. We also refrained from performing plasmid vector engineering. Our objective was to setup a TGE process to mimic protein quality attributes obtained from stable CHO cell line. Polyethyleneimine (PEI)-mediated transfections were performed at high cell density (4 × 10(6) cells/mL) followed by immediate growth arrest at 32 °C for 7 days. Optimizing DNA and PEI concentrations proved to be important. Interestingly, found the direct transfection method (where DNA and PEI were added sequentially) to be superior to the more common indirect method (where DNA and PEI are first pre-complexed). Moreover, the addition of a single feed solution and a polar solvent (N,N dimethylacetamide) significantly increased product titers. The scalability of process from 2 mL to 2 L was demonstrated using multiple proteins and multiple expression volumes. Using this simple, short, 7-day TGE process, we were able to successfully produce 54 unique proteins in a fraction of the time that would have been required to produce the respective stable CHO cell lines. The list of 54 unique proteins includes mAbs, bispecific antibodies, and Fc-fusion proteins. Antibody titers of up to 350 mg/L were achieved with the simple 7-day process. Titers were increased to 1 g/L by extending the culture to 16 days. We also present two case studies comparing product quality of material generated by transient HEK293, transient CHO K1SV GS-KO, and stable CHO K1SV KO pool. Protein from transient CHO was more representative of stable CHO protein compared to protein produced from HEK293.

Peptone Supplementation of Culture Medium Has Variable Effects on the Productivity of CHO Cells.

The optimization of cell culture conditions for growth and productivity of recombinant Chinese hamster ovary (CHO) cells is a critical step in biopharmaceutical manufacturing. In the present study, the effects of the timing and amount of peptone feeding of a recombinant CHO cell line grown in a basal medium in serum-free suspension culture were determined for eight peptones of different origin (plant and casein). The amino acid content and the average molecular weight of the peptones chosen were available. In optimized feeding strategies with single peptones, increase 100 % volumetric productivity and 40 % in cell number were achieved. In feeding strategies with two peptones, several combinations stimulated protein productivity more than either peptone alone, depending on the peptone concentration and time of feeding. Some peptones, which did not stimulate productivity when added alone proved to be effective when used in combination. The combined peptones feeding strategies were more effective with peptones of different origin. Our data support the notion that the origin of peptones provides some guidance in identifying the most effective feeding strategies for recombinant CHO cells.

Polyethyleneimine-based transient gene expression processes for suspension-adapted HEK-293E and CHO-DG44 cells.

Transient gene expression (TGE) from mammalian cells is an increasingly important tool for the rapid production of recombinant proteins for research applications in biochemistry, structural biology, and biomedicine. Here we review methods for the transfection of human embryo kidney (HEK-293) and Chinese hamster ovary (CHO) cells in suspension culture using the cationic polymer polyethylenimine (PEI) for gene delivery.

DNA delivery with hyperbranched polylysine: a comparative study with linear and dendritic polylysine.

PEI and polylysine are among the most investigated synthetic polymeric carriers for DNA delivery. Apart from their practical use, these 2 classes of polymers are also of interest from a fundamental point of view as they both can be prepared in different architectures (linear and branched/dendritic) and in a wide range of molecular weights, which is attractive to establish basic structure-activity relationships. This manuscript reports the results of an extensive study on the influence of molecular weight and architecture of a library of polylysine variants that includes linear, dendritic and hyperbranched polylysine. Hyperbranched polylysine is a new polylysine-based carrier that is structurally related to dendritic polylysine but possesses a randomly branched structure. Hyperbranched polylysine is attractive as it can be prepared in a one-step process on a large scale. The performance of these 3 classes of polylysine analogs was evaluated by assessing eGFP and IgG production in transient gene expression experiments with CHO DG44 cells, which revealed that protein production generally increased with increasing molecular weight and that at comparable molecular weight, the hyperbranched analogs were superior as compared to the dendritic and linear polylysines. To understand the differences between the gene delivery properties of the hyperbranched polylysine analogs on the one hand and the dendritic and linear polylysines on the other hand, the uptake and trafficking of the corresponding polyplexes were investigated. These experiments allowed us to identify (i) polyplex-external cell membrane binding, (ii) free, unbound polylysine coexisting with polyplexes as well as (iii) polymer buffer capacity as three possible factors that may contribute to the superior transfection properties of the hyperbranched polylysines as compared to their linear and dendritic analogs. Altogether, the results of this study indicate that hyperbranched polylysine is an interesting, alternative synthetic gene carrier. Hyperbranched polylysine can be produced at low costs and in large quantities, is partially biodegradable, which may help to prevent cumulative cytotoxicity, and possesses transfection properties that can approach those of PEI.