ABSTRACT
We demonstrate a tunable and fully enclosed fiber-based Bessel beam generator that has the potential for applications in a tough environment. This generator consists of a few-mode fiber (FMF), a short section of graded index fiber (GIF), and a 3D-printed helical axicon. The FMF provides tunable modes that carry an orbital angular momentum (OAM). The GIF was fused to the FMF to expand and collimate the generated modes. The helical axicon was 3D-printed on the GIF tip without any holes or gaps, which reshapes the OAM modes into Bessel modes and adds an additional helical phase structure to them, resulting in the generation of zeroth-order, first-order, and second-order Bessel beams. The fully enclosed structure provides high mechanical strength and optical stability, which enable the generator to be suitable for imaging or particle manipulation in a complex liquid or air environment.
ABSTRACT
A tunable mode convertor is experimentally demonstrated based on a fiber Bragg grating (FBG), which is fabricated in a graded-index nine-mode fiber by using a femtosecond laser. Nine linearly polarized (LP) modes were excited and the coupling efficiency of them can reach 90%. By adjusting the polarization controller, the ±1st-, ±2nd-, ±3rd-, and ±4th-order orbital angular momentum (OAM) modes were excited, which means the OAM tuning of 0-±1â, 0-±2â, 0-±3â, and 0-±4â were achieved. LP21/LP02, LP31/LP12, LP41/LP22/LP03 modes were successfully tuned at 1556.00â nm, 1555.10â nm, and 1554.25â nm by twisting the FBG, respectively. Moreover, combined with polarization and torsion control, the tuning between 0th- and -2nd-order OAM has been realized, which is converted from the tuning between LP02 and LP21. By using this method, the OAM tuning of ±1-±3â and ±4-0-±2â may be further realized theoretically.
ABSTRACT
We experimentally demonstrated an all-fiber focused vortex beam (FVB) generator which was prepared by milling a spiral zone plate (SZP) on the Au-coated end face of a hybrid fiber by focused ion beam (FIB). In this generator, the fundamental modes propagating in the hybrid fiber are focused while being modulated into high-order orbital angular momentum (OAM) mode by the SZP at the end face. The focus length and topological charge were designed and then were both theoretically and experimentally verified. The results show that, the obtained characteristics of the FVB agree with the designed ones. The measured diameters of the focal spots are 2.2 µm, 4.4 µm, and 5.2 µm for the FVB with the topological charge of 0, 1, and 2, respectively. The simulated results show that the proposed FVB generators can maintain good focusing characteristics in different liquids, so it is a good candidate for optical fiber spanner use in a complex liquid environment. Moreover, the processing efficiency of the proposed FVB generators is nearly ten times higher than that of the previously reported ones due to the Au-coated film.
ABSTRACT
We experimentally demonstrated an all-fiber reflective orbital angular momentum (OAM) generator based on orthogonal fiber Bragg grating (OFBG). The OFBG is formed by using a femtosecond laser to prepare two fiber Bragg gratings with a certain spacing in orthogonal planes. The ±1st- and ±2nd-order OAM modes were directly excited in this OFBG, and the chirality of the OAM modes depends on the relative positions of the two FBGs. The mode coupling properties and effects of center-to-center distance on OAM modes were investigated as well.
ABSTRACT
A chiral long period fiber grating (CLPFG) was designed according to the phase-matching condition and conservation law of angular momentum, and was inscribed in a ring core fiber (RCF). This CLPFG was used to directly excite the ±2nd- and ±3rd-order orbital angular momentum (OAM) modes. The coupling efficiency of the OAM mode is up to 98.7% and the insertion loss is within 0.5â dB. The uniformity of the annular mode intensity distribution, polarization characteristics, and the mode purity of coupled OAM modes were investigated in detail. Results show that the coupled high-order OAM modes possess a relative uniform annular intensity distribution, its mode purity is up to 93.2%, and the helical phase modulation is independent on the polarization state of incident light. These results indicate that the RCF-based CLPFG is an ideal OAM mode converter for future high-capacity optical fiber communication systems.