Transparent bamboo as a replacement for glass: Effects of lignin decolorisation methods on weatherability.

Transparent bamboo proved to be a promising substitute for glass due to its high light transmittance and excellent mechanical properties. Nevertheless, it was susceptible to outdoor weathering, which negatively affected its physical and mechanical properties. In this study, two decolorisation methods, namely the delignification method and the lignin modification method, were used to produce transparent bamboos with epoxy resin, referred to as DL-TB and LM-TB, respectively. The changes in surface color, optical and mechanical properties, wettability, thermal stability, and thermal insulation properties of transparent bamboo during accelerated UV weathering were evaluated. Additionally, the deterioration mechanism of DL-TB and LM-TB was investigated. The findings revealed that DL-TB demonstrated better transparency and mechanical properties than LM-TB, although it exhibited lower thermal insulation properties. Furthermore, DL-TB demonstrated enhanced color stability and higher hydrophobicity on weathered surfaces than LM-TB. Unexpectedly, the tensile properties of both two transparent bamboos significantly improved after weathering, especially for LM-TB, which was due to the EP post-curing and the formation of more hydrogen bonds between lignin and EP. These observations revealed that lignin played a key role in the photodegradation process of transparent bamboo, but further attempts should be made in future studies to improve its color stability.

Nanostructured, Biodoping-Activated Fungi-Modified Wood for Enhanced Cd2+ Removal: Performances and Insight on Adsorption Mechanisms.

Nanostructured activated carbon (AC) adsorbents derived from woody biomass have garnered attention for their potential usage to remove toxic substances from the environment due to their high specific surface area, superior micro/mesoporosity, and tunable surface chemistry profile. However, chemical dopants widely used to enhance the chemical reactivity with heavy metals would pollute the environment and conflict with the vision of a cleaner and sustainable environment. Herein, we report a facile, green, and sustainable approach using fungi modification combined with alkali activation to produce AC for heavy metal removal. The decayed wood-derived AC (DAC) exhibited a high specific surface area of 2098 m2/g, and the content of O and N functional groups was 18 and 2.24%, respectively. It showed remarkable adsorption capacity toward Cd2+ of 148.7 mg/g, which was much higher than most reported Cd2+ adsorbents. Such excellent adsorption capacity was primarily based on enhanced physical adsorption (pore filling, π-π) and chemical adsorption (functional group complexation, ion exchange, and precipitation). Additionally, the DAC showed rapid kinetics and remarkable applicability in both dynamic environments and actual water samples. These results suggest that decayed wood has excellent potential for efficient use in the removal of Cd2+ from wastewater. Furthermore, these results indicate that decayed wood can be cleanly produced into high efficiency heavy metal adsorbents to realize value-added utilization of decayed wood.