ABSTRACT
AIM: The objective of this study was to investigate whether dental hypersensitivity and dental fear were linked to the presence and severity of MIH. METHODS: For this cross-sectional study, 1830 students between the ages of 6 and 12 years were recruited from four randomly selected schools. The Children's Fear Survey Schedule-Dental Subscale questionnaire was used to assess dental anxiety and fear. The children's self-reported dental hypersensitivity resulting from MIH was evaluated using the Wong-Baker Facial Scale and the Visual Analog Scale (VAS). RESULTS: MIH was correlated with tooth hypersensitivity, particularly in severe cases. Dental fear was present in 17.4% of the children with MIH, but it was not associated with dental hypersensitivity, gender, or age. CONCLUSION: No association was found between dental fear and dental hypersensitivity in children with MIH.
Subject(s)
Dental Enamel Hypoplasia , Molar Hypomineralization , Humans , Child , Dental Anxiety , Dental Enamel Hypoplasia/complications , Cross-Sectional Studies , Molar , Incisor , Fear , PrevalenceABSTRACT
Introduction: Despite the recognized importance of the anterolateral ligament (ALL) in rotational stability of the knee, some studies still deny its role and even its existence. We studied the prevalence of the ALL in a Caucasian population, as well as its characteristics and anatomical relationships. Materials and methods: The study was performed on 20 knees from 10 embalmed cadavers. A lateral approach, as described by Steven Claes, was used and the relations of the ALL with the lateral epicondyle, lateral inferior genicular artery, lateral meniscus, Gerdy's tubercle and fibular head were recorded. Its length and its width were also measured. Results: The ALL was identified in 16 knees. Its origin was at a distance inferior to 1mm posterior and proximal to the lateral femoral epicondyle and insertion within a mean distance of 2.1±0.6mm from de tibial articular surface, 20.6±1.3mm from the Gerdy's tubercle and 20.3±1.2mm from the fibular head. In all cases ALL presented mutual fibers with the lateral meniscus. The length was 35.8±4.6mm and the width was 4.2±1.3/4.9±1.0/6.5±1.5mm at its proximal, middle and distal third, respectively. No difference was found between gender and the dimensions of the ligament. Conclusions: The ALL was found in 80% of the knees. Its origin is closely related to the lateral collateral ligament and its insertion is halfway between the fibular head and the Gerdy's tubercle. In all cases, we verified the connection between ALL and the lateral meniscus.(AU)
Introducción: Aunque ha sido reconocida la importancia del ligamento anterolateral (ALL) en la estabilidad rotacional de la rodilla, algunos estudios siguen negando su existencia. Estudiamos la prevalencia del ALL en una población caucásica, así como sus características y relaciones anatómicas. Métodos: El estudio se realizó en 20 rodillas de 10 cadáveres embalsamados. Se utilizó un abordaje lateral, como lo describe Steven Claes, y se registraron las relaciones del ALL con el epicóndilo lateral, la arteria genicular inferior lateral, el menisco lateral, el tubérculo de Gerdy y la cabeza del peroné. También se midió el ancho y el largo. Resultados: El ALL fue identificado en 16 rodillas. Su origen estaba a una distancia inferior a 1mm posterior y proximal al epicóndilo femoral lateral y su inserción a una distancia media de 2,1±0,6mm de la superficie articular tibial, 20,6±1,3mm de la tuberosidad de Gerdy y 20,3±1,2mm de la cabeza del peroné. En todos los casos se presentaban fibras mutuas con el menisco lateral. El largo fue de 35,8±4,6mm y el ancho fue de 4,2±1,3/4,9±1,0/6,5±1,5mm en su tercio proximal, medio y distal. Conclusiones: El ALL se encontró en el 80% de las rodillas. Su origen está íntimamente relacionado con el ligamento colateral lateral y su inserción se encuentra a media distancia entre la cabeza del peroné y el tubérculo de Gerdy. En todos los casos comprobamos la conexión entre el ALL y el menisco lateral.(AU)
Subject(s)
Humans , Male , Female , Cadaver , Medial Collateral Ligament, Knee , Knee/surgery , Dissection , Knee Injuries , AutopsyABSTRACT
Introduction: Despite the recognized importance of the anterolateral ligament (ALL) in rotational stability of the knee, some studies still deny its role and even its existence. We studied the prevalence of the ALL in a Caucasian population, as well as its characteristics and anatomical relationships. Materials and methods: The study was performed on 20 knees from 10 embalmed cadavers. A lateral approach, as described by Steven Claes, was used and the relations of the ALL with the lateral epicondyle, lateral inferior genicular artery, lateral meniscus, Gerdy's tubercle and fibular head were recorded. Its length and its width were also measured. Results: The ALL was identified in 16 knees. Its origin was at a distance inferior to 1mm posterior and proximal to the lateral femoral epicondyle and insertion within a mean distance of 2.1±0.6mm from de tibial articular surface, 20.6±1.3mm from the Gerdy's tubercle and 20.3±1.2mm from the fibular head. In all cases ALL presented mutual fibers with the lateral meniscus. The length was 35.8±4.6mm and the width was 4.2±1.3/4.9±1.0/6.5±1.5mm at its proximal, middle and distal third, respectively. No difference was found between gender and the dimensions of the ligament. Conclusions: The ALL was found in 80% of the knees. Its origin is closely related to the lateral collateral ligament and its insertion is halfway between the fibular head and the Gerdy's tubercle. In all cases, we verified the connection between ALL and the lateral meniscus.(AU)
Introducción: Aunque ha sido reconocida la importancia del ligamento anterolateral (ALL) en la estabilidad rotacional de la rodilla, algunos estudios siguen negando su existencia. Estudiamos la prevalencia del ALL en una población caucásica, así como sus características y relaciones anatómicas. Métodos: El estudio se realizó en 20 rodillas de 10 cadáveres embalsamados. Se utilizó un abordaje lateral, como lo describe Steven Claes, y se registraron las relaciones del ALL con el epicóndilo lateral, la arteria genicular inferior lateral, el menisco lateral, el tubérculo de Gerdy y la cabeza del peroné. También se midió el ancho y el largo. Resultados: El ALL fue identificado en 16 rodillas. Su origen estaba a una distancia inferior a 1mm posterior y proximal al epicóndilo femoral lateral y su inserción a una distancia media de 2,1±0,6mm de la superficie articular tibial, 20,6±1,3mm de la tuberosidad de Gerdy y 20,3±1,2mm de la cabeza del peroné. En todos los casos se presentaban fibras mutuas con el menisco lateral. El largo fue de 35,8±4,6mm y el ancho fue de 4,2±1,3/4,9±1,0/6,5±1,5mm en su tercio proximal, medio y distal. Conclusiones: El ALL se encontró en el 80% de las rodillas. Su origen está íntimamente relacionado con el ligamento colateral lateral y su inserción se encuentra a media distancia entre la cabeza del peroné y el tubérculo de Gerdy. En todos los casos comprobamos la conexión entre el ALL y el menisco lateral.(AU)
Subject(s)
Humans , Male , Female , Cadaver , Medial Collateral Ligament, Knee , Knee/surgery , Dissection , Knee Injuries , AutopsyABSTRACT
INTRODUCTION: Despite the recognized importance of the anterolateral ligament (ALL) in rotational stability of the knee, some studies still deny its role and even its existence. We studied the prevalence of the ALL in a Caucasian population, as well as its characteristics and anatomical relationships. MATERIALS AND METHODS: The study was performed on 20 knees from 10 embalmed cadavers. A lateral approach, as described by Steven Claes, was used and the relations of the ALL with the lateral epicondyle, lateral inferior genicular artery, lateral meniscus, Gerdy's tubercle and fibular head were recorded. Its length and its width were also measured. RESULTS: The ALL was identified in 16 knees. Its origin was at a distance inferior to 1mm posterior and proximal to the lateral femoral epicondyle and insertion within a mean distance of 2.1±0.6mm from de tibial articular surface, 20.6±1.3mm from the Gerdy's tubercle and 20.3±1.2mm from the fibular head. In all cases ALL presented mutual fibers with the lateral meniscus. The length was 35.8±4.6mm and the width was 4.2±1.3/4.9±1.0/6.5±1.5mm at its proximal, middle and distal third, respectively. No difference was found between gender and the dimensions of the ligament. CONCLUSIONS: The ALL was found in 80% of the knees. Its origin is closely related to the lateral collateral ligament and its insertion is halfway between the fibular head and the Gerdy's tubercle. In all cases, we verified the connection between ALL and the lateral meniscus.
Subject(s)
Anterior Cruciate Ligament , Knee Joint , Humans , Tibia , Menisci, Tibial , Cadaver , Ligaments, ArticularABSTRACT
INTRODUCTION: Despite the recognized importance of the anterolateral ligament (ALL) in rotational stability of the knee, some studies still deny its role and even its existence. We studied the prevalence of the ALL in a Caucasian population, as well as its characteristics and anatomical relationships. MATERIALS AND METHODS: The study was performed on 20 knees from 10 embalmed cadavers. A lateral approach, as described by Steven Claes, was used and the relations of the ALL with the lateral epicondyle, lateral inferior genicular artery, lateral meniscus, Gerdy's tubercle and fibular head were recorded. Its length and its width were also measured. RESULTS: The ALL was identified in 16 knees. Its origin was at a distance inferior to 1mm posterior and proximal to the lateral femoral epicondyle and insertion within a mean distance of 2.1±0.6mm from the tibial articular surface, 20.6±1.3mm from the Gerdy's tubercle and 20.3±1.2mm from the fibular head. In all cases ALL presented mutual fibers with the lateral meniscus. The length was 35.8±4.6mm and the width was 4.2±1.3/4.9±1.0/6.5±1.5mm at its proximal, middle and distal third, respectively. No difference was found between gender and the dimensions of the ligament. CONCLUSIONS: The ALL was found in 80% of the knees. Its origin is closely related to the lateral collateral ligament and its insertion is halfway between the fibular head and the Gerdy's tubercle. In all cases, we verified the connection between ALL and the lateral meniscus.
Subject(s)
Anterior Cruciate Ligament , Knee Joint , Humans , Tibia , Menisci, Tibial , Ligaments, Articular , CadaverABSTRACT
Since linear calibration is mostly preferred for analytical determinations, linearity in the calibration range is an important performance characteristic of any instrumental analytical method. Linearity can be proved by applying several graphical and numerical approaches. The principal graphical criteria are visual inspection of the calibration plot, the residuals plot, and the response factors plot, also called sensitivity or linearity plot. All of them must include confidence limits in order to visualize linearity deviations. In this work, the graphical representation of percent relative errors of back-calculated concentrations against the concentration of the calibration standards is proposed as linearity criterion. This graph considers a confidence interval based on the expected recovery related to the concentration level according to AOAC approach. To illustrate it, four calibration examples covering different analytical techniques and calibration situations have been studied. The proposed %RE graph was useful in all examples, helping to highlight problems related to non-linear behavior such as points with high leverage and deviations from linearity at the extremes of the calibration range. By this way, a numerical decision limit which takes into account the concentration of calibration standards can be easily included as linearity criterion in the form of %RETh=2·C-0.11. Accordingly, this %RE parameter is accurate for the decision-making related to linearity assessment according to the fitness-for-purpose approach.
ABSTRACT
PURPOSE: Rhabdomyolysis is a syndrome caused by musculoskeletal tissue damage that leads to the release of large amounts of intracellular elements, which particularly affect renal function. The most common causes are severe trauma, ischemia, surgical procedures, and drug abuse. We aimed to determine the incidence of rhabdomyolysis by measuring muscle injury markers (CK, myoglobin), to identify pre/post-admission as well as iatrogenic risk factors for rhabdomyolysis in severe polytrauma, to clarify the relevance of orthopedic injuries and surgical treatment in the onset/worsening of rhabdomyolysis, and to correlate risk factors with its main complication-acute renal failure (ARF). METHODS: Prospective study of severe polytrauma patients (Injury Severity Score (ISS) >15), with CK and myoglobin values measured at admission and after 24, 48, and 72 h. Peak values, variations between admission and peak, and variations between admission and day 3 were all determined. The correlations of those values with the onset of ARF and other negative outcomes were assessed. RESULTS: A total of 57 consecutive patients with a median ISS of 29 were included. ARF was present in 20 patients (38 %). CK-0 level was correlated with male gender (p < 0.027) and ISS (0.014); Mb-0 level was correlated with hypovolemic shock (0.003) and skeletal fracture (p < 0.043). CK-max was correlated with surgery (p < 0.038) and surgery duration (p < 0.014); Mb-max was correlated with surgery (p < 0.002) and anesthesia duration (p < 0.005). Δ-CK was correlated with surgery (p < 0.01) and surgery duration (p < 0.017), and Δ0-3-CK was correlated with surgery (p < 0.042). Logistic regression analysis found relationships between Δ0-3-CK and both ICU admission (p < 0.003) and MODS (p < 0.012), and between Mb-max and ARF (p < 0.034). CONCLUSION: We found that a large number of factors are implicated in CK and Mb variations. Rhabdomyolysis is a very frequent complication, but increase in CK marker alone does not seem to be correlated with the incidence of ARF. Therefore, Mb level should be considered in this group of patients.
ABSTRACT
Due to the chemical and physical structure of a lignocellulosic biomass, its anaerobic digestion (AD) is a slow and difficult process. In this paper, the results obtained from a batch biochemical methane potential (BMP) test and fed-batch mesophilic AD assays of sunflower oil cake (SuOC) are presented. Taking into account the low digestibility shown during one-stage experiments the methane yield decreased considerably after increasing the organic loading rate (OLR) from 2 to 3 g VS L(-1) d(-1), SuOC was subjected to a two-stage AD process (hydrolytic-acidogenic and methanogenic stages), in two separate reactors operating in series where the methanogenic stage became acidified (with >1,600 mg acetic acid L(-1)) at an OLR as low as 2 g VS L(-1) d(-1). More recently, BMP assays were carried out after mechanical, thermal, and ultrasonic pre-treatments to determine the best option on the basis of the methane yield obtained.
Subject(s)
Plant Oils/chemistry , Waste Management/methods , Anaerobiosis , Batch Cell Culture Techniques , Biodegradation, Environmental , Fatty Acids, Volatile/analysis , Hydrolysis , Mechanical Phenomena , Methane/analysis , Sunflower Oil , Temperature , UltrasonicsABSTRACT
The thermophilic anaerobic digestion (TAD) of sewage sludge has often been found to be less stable than mesophilic treatment. In comparison to mesophilic digesters, thermophilic reactors treating sludge are generally characterized by relatively high concentrations of volatile fatty acids (VFA) in the effluent along with poor effluent quality, indicating a lower level of process stability. However, reviewing the literature related to the procedure for obtaining a thermophilic inoculum, it seems that most of the problems associated with the instability and the accumulation of organic intermediates are the result of the manner in which the thermophilic sludge has been obtained. In this paper, the different options available for obtaining an anaerobic digester operating at thermophilic temperature (55°C) have been reviewed. In this light, rapid heating to the target temperature followed by the development of thermophilic microorganisms, which can be determined by VFA dropping to ≤ 500 mg acetic acid L(-1) before increasing the organic loading rate (OLR), has been determined the most suitable means of establishing TAD.
Subject(s)
Bioreactors , Sewage , Anaerobiosis , Archaea/metabolism , Bacteria/metabolism , Bioreactors/microbiology , Hot TemperatureABSTRACT
In this study ultrasonic (US) pretreatment was investigated with the aim of improving the anaerobic digestion of sunflower oil cake (SuOC), the solid waste derived from the extraction process of sunflower oil. Five ultrasonic pretreatment assays were conducted at specific energy (SE) and sonication times in a range from 24,000 kJ/kg TS and 16.6 min (assay 1: US1) to 597,600 kJ/kg TS and 331.2 min (assay 5: US5), respectively, all operating at a constant sonication frequency (20 kHz) and ultrasonic power (120 W). As regards ultrasonic pretreatment, the working conditions of the first assay (US1) using samples of SuOC at 2% (w/v) showed to be the most appropriate in terms of both lignin and hemicellulose degradation (57.7% and 66.7%, respectively) and cellulose increase (54% increase with respect to its initial concentration). The percentage of COD solubilization increased from only 14% to 21% when SE was 25 times higher. Results obtained in batch anaerobic digestion experiments (biochemical methane potential - BMP - tests) conducted at 35°C of the solid and liquid fractions released from the different ultrasonic conditions tested, indicated that for the first experiment (US1) the average ultimate methane yield obtained was 53.8% higher than that achieved for untreated SuOC. Finally, the kinetic constants of the anaerobic digestion of the solid and liquid fractions released after the ultrasonic pretreatment were virtually independent of the operation conditions assayed.
Subject(s)
Plant Oils/metabolism , Refuse Disposal/methods , Ultrasonics , Anaerobiosis , Plant Oils/chemistry , Sunflower OilABSTRACT
In 2008, the first Proficiency Testing Scheme of Chemical Oxygen Demand (1(st)COD-PT(ADG)) was conducted to assess the results obtained for different research groups whose field work is mainly anaerobic digestion. This study was performed using four samples, two solid samples as raw materials and two solid samples to prepare high concentration suspended solid solutions. Invitations were sent to a large number of laboratories, mainly to anaerobic digestion research groups. Finally, thirty labs from sixteen countries agreed to participate, but for different reasons four participants could not send any data. In total, twenty-six results were reported to the COD-PT coordinator. This study showed the importance of continuous participation in proficiency testing (PT) schemes in order to compare the results obtained. Taking into account the lack of a general standard method and high quality certified reference materials (CRMs), the traceability of COD determination is not currently easy to check. In addition, the spread of participants' results obtained was high and pointed to the advisability of using consensus values due to their unreliability. Therefore, the theoretical oxygen demand (ThOD) values were considered as assigned values for all the samples analysed. On the other hand, in this PT the established standard deviation (ESD) has been determined by the Horwitz modified function. Participants of this 1(st)COD-PT(ADG) were asked to give a short report on the analytical method used. Although all the participants used potassium dichromate as their oxidant reagent, their experimental procedures were very different. With the purpose of comparing the results obtained, the different experimental conditions used were classified into five methods, corresponding to two main categories, open and closed reflux. The performance of laboratories was expressed by the z-score, whose value is considered satisfactory when z-score Subject(s)
Clinical Laboratory Techniques/standards
, Oxygen/analysis
, Anaerobiosis
, Carbohydrates/analysis
, Chemistry Techniques, Analytical/methods
, Chenopodium quinoa/chemistry
, Fats/analysis
, Oxygen/metabolism
, Oxygen/standards
, Plant Oils/chemistry
, Proteins/analysis
, Reference Standards
, Reproducibility of Results
, Sewage/chemistry
, Sunflower Oil
ABSTRACT
The influence of the hydraulic retention time (HRT) and organic loading rate (OLR) on the performance of the hydrolytic-acidogenic step of a two-stage anaerobic digestion process of sunflower oil cake (SuOC) were assessed. The experiments were performed in laboratory-scale completely stirred tank reactors at mesophilic (35 degrees C) temperature. Six OLR (ranging from 4 to 9 g VS L(-1) d(-1)) for four HRTs (8, 10, 12 and 15 days) were tested to check the effect of each operational variable. Based on the results obtained, it can be concluded that the hydrolysis yields obtained for all HRTs and OLRs assayed were in the range of 20.5-30.1%. In addition, the acidification degree of the substrate was mainly influenced by the OLR but not by the HRTs, the highest value (83.8%) being achieved for an HRT of 10 days and an OLR of 6 g VS L(-1) d(-1).
Subject(s)
Acids/metabolism , Anaerobiosis , Plant Oils/metabolism , Ammonia/analysis , Hydrogen-Ion Concentration , Hydrolysis , Nitrogen/analysis , Sunflower OilABSTRACT
The effect of the hydraulic retention time (HRT) on the performance of two up-flow anaerobic fixed bed digesters (UFAFBDs) packed with waste tire rubber (D1) and waste tire rubber and zeolite (D2) as micro-organism immobilization supports was studied. It was found that a first-order kinetic model described well the experimental results obtained. The kinetic constants for COD, BOD5, total solids (TS) and volatile solids (VS) removal were determined to be higher in digester D2 than in digester D1 or control. Specifically, they were 0.28 +/- 0.01, 0.32 +/- 0.02, 0.16 +/- 0.01 and 0.24 +/- 0.01 d(- 1) respectively for D1 and 0.33 +/- 0.02, 0.40 +/- 0.02, 0.21 +/- 0.01 and 0.28 +/- 0.01 d(- 1) respectively for D2. This was significant at the 95% confidence level. In addition, the first-order model was also adequate for assessing the effect of the HRT on the removal efficiency and methane production. Maximum methane yield and the first-order constant for methane production were determined and the results obtained were comparable with those obtained by other authors but operating at higher HRTs. Maximum methane yields and the kinetic constant for methane production were 11.1% and 29.4% higher in digester D2 than in D1.
Subject(s)
Anaerobiosis , Dairying , Manure , Zeolites/chemistry , Bioreactors , KineticsABSTRACT
Four alternatives (runs A, B, C and D) for heavy metals removal (Fe, Cu, Zn and Al) from acid mine drainage water (AMDW) produced in the mining areas of the Huelva Province, Spain, were evaluated. In run A, the anaerobic effluent from the treatment of acid mine drainage water (cheese whey added as a source of carbon) was mixed with the raw AMDW. The pH increased to 3.5 with the addition of KOH. In run B, biogas with around 30% of hydrogen sulphide obtained in the anaerobic reactor was sparged to the mixture obtained in run A, but in this case at a pH of 5.5. In run C, the pH of the raw AMDW was increased to 3.5 by the addition of KOH solution. Finally, in run D, the pH of the raw AMDW was increased to 5.5 by the addition of KOH solution and further biogas was sparged under the same conditions as in run A. It was found that heavy metal removal was a function of pH. At a pH of 3.5 most of the iron was removed while Zn and Cu were partially removed. At a pH of 5.5 the removal of all metals increased considerably. The best results were obtained in run B where the percentages of removal of Fe, Cu, Zn and Al achieved values of 91.3, 96.1, 79.0 and 99.0%, respectively. According to the experimental results obtained tentative schemas of the flow diagram of the processes were proposed.
Subject(s)
Biodegradation, Environmental , Industrial Waste/prevention & control , Metals, Heavy/metabolism , Mining , Anaerobiosis , Bioreactors , Hydrogen Sulfide , Hydrogen-Ion Concentration , Water Pollutants, Chemical/metabolismABSTRACT
The adsorption of methylene blue (MB) on three commercial granular activated carbons (GACs), 12 x 40 mesh size, namely Filtrasorb 400, Norit and Picacarb has been researched. A comparative study of adsorptive capacity using the proposed single-point test and the traditional multi-point isotherm test was carried out. For the single-point test, the influence of some parameters such as MB/GACs mass ratio and contact time were evaluated. For this test the adsorptive capacities of the three GACs studied were 319+/-14, 280+/-7 and 260+/-6 mg g(-1) for Filtrasorb 400, Norit and Picacarb, respectively. For multi-point isotherm adsorption test the Langmuir model was used. The parameters involved were obtained by linear and non-linear regression methods. The maximum adsorptive capacity values obtained for both methods were similar and statistically not different than those obtained with the single-point tests. This experimental work also aimed at establishing a relationship between the adsorbent particle size and the adsorptive capacity which could be used complementarily to evaluate the quality of GACs as adsorbents. For a mean particle diameter of 1mm and after 24h of contact time the adsorptive capacity values were 255+/-7, 222+/-7 and 160+/-7 mg g(-1) for Filtrasorb 400, Norit and Picacarb, respectively.
Subject(s)
Adsorption , Charcoal/chemistry , Methylene Blue/isolation & purification , Kinetics , Particle Size , Temperature , ThermodynamicsABSTRACT
An evaluation of the performance of a laboratory-scale microalgae pond treating effluent from an anaerobic fixed bed reactor digesting distillery wastewater was carried out. The microalgae pond operated with an effluent recycling (R) of 10:1 with respect to the influent and at surface organic loading rates of 418 kg COD ha(-1) day(-1) and 92 kg BOD5 ha(-1) day(-1). During the experiment total chemical oxygen demand (COD), biochemical oxygen demand (BOD5), total solids (TS), total suspended solids (TSS), volatile suspended solids (VSS), total nitrogen, ammonia, total phosphorus, orthophosphate, total chlorophyll (CT) and chlorophyll a (Ca) concentrations were monitored. Overall COD and BOD5 removal efficiencies of 98.2% and 98.8% were obtained. The global solids removal efficiencies were of 93.2%, 92.6% and 97.6% for TS, TSS and VSS, respectively. The removal efficiencies obtained for organic nitrogen and ammonia were 90.2% and 84.1%, respectively. Finally, the removals for total phosphorus and orthophosphate were 85.5% and 87.3%, respectively. It was demonstrated that microalgae grew in this waste by determination of the total chlorophyll and chlorophyll a in the effluent.
Subject(s)
Chlorella vulgaris/metabolism , Industrial Waste , Waste Disposal, Fluid/methods , Alcoholic Beverages , Ammonia/analysis , Anaerobiosis , Biodegradation, Environmental , Bioreactors/microbiology , Chlorophyll/analysis , Chlorophyll A , Hydrogen-Ion Concentration , Nitrogen/analysis , Phosphates/analysisABSTRACT
A modified approach to determine the chemical oxygen demand (COD) of solid substrates based on the DIN 38414-S9 standard method is proposed. The adapted procedure is assessed and compared with standard methods widely used for water and wastewater such as the American Public Health Association-American Water Works Association-Water Pollution Control Federation (APHA-AWWA-WPCF) standard methods 5220 B-open reflux (SM-OR) and 5220 D-closed reflux colorimetric (SM-CR). Solutions with high suspended concentration of solids, as well as digestates from an anaerobic reactor, were used during the comparative test. For solid substrates, the COD recovery was about 100% when the proposed method was used. For solutions with solid content higher than 20 g TS L(-1), the recovery was only completed when the proposed method was used, showing that the methods traditionally employed are not very appropriate for samples with the described characteristics. For instance, percentages of COD recovery in the ranges of 77.3-87.1% and 89.4-94.1% were achieved when the SM-OR and SM-CR methods were used, respectively.
Subject(s)
Oxygen/chemistry , Water Pollutants/chemistry , Methods , Oxygen/analysis , Refuse Disposal , Solutions , Waste Disposal, FluidABSTRACT
A study of the effect of the organic loading rate (OLR) on the anaerobic acidogenic fermentation of two-phase olive mill solid residue (OMSR) derived from fruits with a low ripening index was carried out in a laboratory-scale completely stirred tank reactor at mesophilic temperature (35 degrees C). Eight experimental runs were carried out at OLRs of 3.2, 5.6, 7.4, 9.6, 11.0, 12.9, 14.0 and 15.1g T-COD/ld, which were equivalent to hydraulic retention times of 50.0, 28.8, 21.8, 16.9, 14.7, 12.4, 11.5 and 10.7d, respectively. The experimental results obtained demonstrated that the optimum value of OLR for the acidogenic fermentation process was 12.9 g T-COD/ld, for which a maximum production of acetic acid was achieved. It was found that inhibition of the process occurred at OLRs higher than 12.9 g T-COD/ld. This was characterized by a significant decrease in the acetic acid concentration in the effluent and an increase in the concentration of other volatile acids that may affect the methanogenic step. The process inhibition was also characterized by the plateau in the curves of the effluent substrate concentration versus the OLR applied. It was found that a first-order kinetics satisfactorily described the influence of non-acetic acid soluble organic matter concentration (S-COD( *)) on the rate of soluble organic matter conversion to acetic acid (R(S-COD)( *)), and the influence of acetic acid concentration (AcH) on the rate of acetic acid production (R(AcH)), while a potential equation type adequately described the influence of acetic acid concentration on the volumetric hydrogen production (R(ACH) ). The kinetic constant for soluble organic matter removal was 0.145 d(-1), while the constant for acetic acid formation was found to be 0.075 d(-1).
Subject(s)
Fermentation , Food Industry , Olea/chemistry , Waste Disposal, Fluid/methods , Acids , Anaerobiosis , Fatty Acids, Volatile/chemistry , Fatty Acids, Volatile/metabolism , Hydrogen , Hydrogen-Ion Concentration , Kinetics , Time FactorsABSTRACT
A study of the role of the depth in the performance of laboratory-scale down-flow anaerobic fixed-bed reactors (DFAFBR) was carried out at different nominal hydraulic retention times (HRT(N)) using piggery waste as substrate at different influent concentrations (2, 4, 6 and 8 g COD/L). The profiles of soluble chemical oxygen demand (COD) (SCOD), organic nitrogen (O.N.), ammonia nitrogen (A.N.), pH and electrical conductivity (E.C.) through the reactor depths showed an initial highly active zone, which was located around the first half of the reactor depth, and a second zone with a lower biological activity. It was found that the depth of the active zone decreased as the HRT(N) increased and that the slopes of the profiles obtained increased with the rise in the influent concentration. A hydraulic test showed an increase in the dispersion number when the HRT(N) increased. The reactors showed a hydraulic pattern between plug-flow and back-mix. The real values of HRT (Theta) also defined as real contact times were determined to be 0.7, 2.1, 3.4, 4.7, 6.4 and 8 days for values of HRT(N) of 1, 2, 3, 4, 5 and 6 days, respectively. It was found that the concentration of SCOD within the reactor decreased exponentially with the increase in the value of theta. Additionally, the influent concentration had a strong influence on the SCOD variation concentration, mainly at values of theta under 1.5 days, which corresponded to the first part of the reactors.
Subject(s)
Bacteria, Anaerobic/physiology , Bioreactors , Sewage/microbiology , Waste Disposal, Fluid/methods , Anaerobiosis , Animals , Biodegradation, Environmental , Dose-Response Relationship, Drug , Filtration , Hydrogen-Ion Concentration , Methane/chemistry , Nitrogen/chemistry , Oxygen/chemistry , Sewage/chemistry , SwineABSTRACT
A kinetic study was carried out on the anaerobic digestion of untreated vinasses and vinasses previously fermented with Penicillium decumbens. Two 1-l volume continuous-flow stirred tank reactors (CFSTR) operating at mesophilic temperature (35 degrees C) were used for the study. One reactor was fed with untreated vinasses (COD concentration of 80.5 g/l) and the other with vinasses previously fermented (COD concentration of 23.0 g/l). Both reactors were operated at organic loading rates in the range of 1.5-7.5 g chemical oxygen demand (COD)/l-d. The results obtained were evaluated using the Chen-Hashimoto methane production model to determine the values of the maximum specific growth rate (micromax) and the model kinetic constant (K) of the process for each case studied. The kinetic constants (micromax and K) were affected by the pre-treatment, and the respective values were 9.6 and 6.9 times higher for pretreated vinasses than those of untreated vinasses. This was significant at the 95% confidence level. This behaviour is believed to be due to the lower levels of phenolic compounds present in the pretreated vinasses, as compared to untreated vinasses, resulting in an improved process performance, kinetics and stability. Finally, the experimental values of methane production were reproduced with deviations equal to or less than 4% and 10% for pretreated and untreated vinasses, respectively.