Fabrication of three-dimensionally printed polylactic acid nasal stent prosthesis for postnasal reconstruction using extraoral scanning and photogrammetry techniques: A report on two patients.

Severe and combined nasal defects associated with trauma or neoplasm excision can cause significant functional and esthetic problems. To avoid nasal synechia following reconstructive surgeries, a nasal stent prosthesis is required to act as an internal scaffold to support the graft and residual tissues. The purpose of the stent is to maintain internal airway patency and to prevent collapse and contracture of the donor tissues. A conventional nasal stent prosthesis has disadvantages, including the difficulty in maintaining adequate thickness and internal patency during fabrication. Hence, this clinical report introduces the fabrication technique for 3- dimensionally printed polylactic acid nasal stent prostheses using extraoral scanning and photogrammetry methods.

Rehabilitation Using Hybrid Technique for Feeding Plate Fabrication in a 3-Month-Old Infant with Cleft Palate Defect Utilising Digital and Conventional Method: A Case Report.

ABSTRACT: Cleft palate leads to difficulty in suckling, speech abnormalities, dental problems, hearing loss and middle ear infections. Feeding plate acts as a barrier between the oral and nasal cavities allowing the normal development of jaws and enhanced nutritional supply to the patient. Fabrication of the feeding plate using digital means provide better adaptability due to the engagement of all the possible favourable anatomic undercuts, thereby, providing better retention. This case report discusses the hybrid technique including both the digital and conventional means for fabrication of a feeding plate to obturate the defect between the oral and nasal cavity.

Prosthetic rehabilitation of mucormycosis patients using DMLS fabricated cast partial denture with semi-precision attachments-A case series.

BACKGROUND: The rehabilitation of maxillectomy defects is a challenging endeavour that necessitates customizing the procedure for each patient. The successful treatment for these patients requires a combined conventional and contemporary treatment options. The high-tech prosthodontic treatment option for these defects and distal extension cases are combining fixed and removable partial dentures with precision/semi-precision attachments. It will enhance retention, stability, esthetics and functional ability of the prosthesis. METHODS: Three post-Covid Mucormycosis patients reported after localised debridement and partial maxillectomy for definitive rehabilitation. For partial Maxillectomy patients, DMLS designed cast partial denture along with semi-precision attachments (Preci-vertix and OT strategy Rhein For patient with localized defect, DMLS designed cast partial denture was planned. For both patients the defect area was kept as hollow cavity (Closed or Open), in order to reduce the weight of the prosthesis. RESULTS AND CONCLUSION: The prosthodontic rehabilitation of these patient can be a simple and economical treatment options and it improves the stomatognathic functions and quality of life of the patient. The major hurdles during rehabilitation are retention and stability as there is no basal seat and hard tissue support. Hence, we tried a combined conventional and digital techniques in order to provide prosthesis with precise fit and accuracy as well as reducing the treatment time and visits of the patients.

Surgical Nasal Stent Fabrication Using Innovative Multisegmental Cast to Rehabilitate Anatomic and Functional Dynamicity of Upper Airway: A Case Report.

Aim: The purpose of this case report is to provide a simple, efficient, and novel technique for fabricating a nasal stent utilizing a multisegmental cast to rehabilitate the anatomic and functional dynamicity of the upper airway following primary cleft lip and primary rhinoplasty surgery. Background: Nasal deformity is often associated with congenital unilateral or bilateral cleft lip and palate. Despite primary nasal reconstruction at the time of definitive lip repair, the long-term postoperative outcome of the nasal correction frequently falls short of the surgeon's or patient's expectations. This condition is more prevalent in the Asian population due to undeveloped, thin alar cartilage and thick skin. Case description: A 4-month-old female infant was referred from the Department of Plastic Surgery for the fabrication of a nasal stent after surgical cleft lip repair with nasal reconstruction. A customized nasal stent using a multisegmental cast followed by relining with tissue conditioner was planned to minimize relapse of the nasal defect. Conclusion: The technique described in the present case for nasal stent fabrication is simple, cost-efficient and innovative. Postoperative use of this nasal stent helps to maintain the corrected position of the nose after primary lip and nasal correction, resulting in significantly improved esthetic results. Clinical significance: Nasal surgical correction deteriorates over time, especially within the 1st year of surgery due to tissue memory and contraction of the scar tissue. Hence a nasal stent should be worn after the surgery to maintain the corrected nasal form. How to cite this article: Singh S, Rathee M, Alam M, et al. Surgical Nasal Stent Fabrication Using Innovative Multisegmental Cast to Rehabilitate Anatomic and Functional Dynamicity of Upper Airway: A Case Report. Int J Clin Pediatr Dent 2023;16(S-2):S220-S223.

Effect of conventionally fabricated and three-dimensional printed provisional restorations on hard and soft peri-implant tissues in the mandibular posterior region: A randomized controlled clinical trial.

Background: The purpose of this study was to conduct a randomized controlled clinical trial to compare and evaluate the effect of provisional restorations fabricated by two techniques, namely, conventional and three-dimensional (3D) printing processes on the peri-implant hard and soft tissues over early nonfunctional loaded implants in the mandibular posterior region. Materials and Methods: A randomized controlled clinical trial was conducted across 24 subjects broadly divided into two groups with 12 dental implants each, i.e., GpIC with conventionally fabricated provisional restoration and GpIID with 3D printed fabricated provisional restoration. The prosthetic phase was carried out at 2 weeks, and subjects were evaluated at baseline (at the time of prosthesis placement), 2 months, and 4 months for peri-implant marginal bone level, mucosal suppuration, sulcular probing depth, and modified sulcular bleeding index. Patient satisfaction was assessed using 5-item questionnaires at 4 months. The intragroup comparison for all the data was done using Wilcoxon signed-rank test. The intergroup comparison for all the data was done using Mann-Whitney U-test. The comparison of frequency of responses between GpIC and GpIID was done using Chi-square test. P < 0.05 was considered to be statistically significant. Results: Nonsignificant difference was observed in all the hard and soft tissue parameters between the groups at baseline, 2 months, and 4 months (P > 0.05). Improvement in bleeding on probing was found to be greater around dental implants restored with 3D printed provisional restoration than dental implants restored with conventionally fabricated provisional restoration from baseline to 4 months of follow-up, and the difference in finding was statistically significant (P < 0.05). There was a statistically nonsignificant difference seen for the frequencies between the groups (P > 0.05) for all questions related to patient satisfaction. Conclusion: The effect of conventionally fabricated and 3D printed provisional restorations on peri-implant hard and soft tissues was comparable to each other on an early nonfunctionally loaded implant in the mandibular posterior region.

Comparative evaluation of implant stability and crestal bone level between tapered and cylindrical implants in the posterior regions of the mandible: A prospective, randomized, split-mouth clinical trial.

Purpose: To compare the clinical outcome of tapered and cylindrical implants placed in the posterior region of mandible by measuring implant stability and crestal bone level at the healing period. Materials and Methods: A prospective clinical study was conducted on 15 patients who were included in the study based on the inclusion and exclusion criteria. A total of 30 dental implants were placed in both groups: 15 implants in Group I (tapered implants) and 15 implants in Group II (cylindrical implants) in the posterior region of mandible. Implant stability assessment by periotest was done at the time of implant placement (baseline) and after 3 months. The crestal bone level was measured with the help of radiovisiography (RVG) at the time of implant placement (baseline) and at 3 and 6 months. Results: At baseline, there was statistically significant (P < 0.01) difference in primary implant stability. Tapered implants had higher primary implant stability than cylindrical implants. However, at 3 months, there was no statistically significant (P > 0.05) difference in the secondary implant stability of both the groups. Also, the crestal bone level on the mesial and distal sides of dental implant for tapered and cylindrical implants was statistically nonsignificant (P > 0.05) at all time intervals, that is, at baseline and at 3 and 6 months. Conclusion: Tapered implants had higher primary stability than cylindrical implants, and no difference was found in secondary stability. The crestal bone level was similar for both groups during early healing and early post-loading periods.

Magnet-Retained closed bulb hollow obturator and orbital prosthesis for patient with maxillectomy and orbital exenteration following COVID-Associated mucormycosis.

The rehabilitation of facial deformities is a challenging endeavour that necessitates customising the procedure for each patient. Significant physical and psychological impacts might arise as a result of the deformity in the orofacial region. Post-COVID rhino-orbital mucormycosis has led to rise in extraoral and intraoral defects since 2020. To avoid further surgery, an economical maxillofacial prosthesis is an excellent choice as it is aesthetic, durable, long-lasting and retentive. This case report describes the prosthetic rehabilitation of the patient with post-COVID mucormycosis maxillectomy and orbital exenteration using a magnet-retained closed bulb hollow acrylic obturator and room-temperature vulcanising silicone orbital prosthesis. To enhance retention, a spectacle and medical-grade adhesive were also used.

Surgical Assistance for Favorable Outcome Achieved through Presurgical Nasoalveolar Molding Using Innovative Impression Technique: A Case Report.

Aim: The aim of this case report is to highlight the importance of presurgical nasoalveolar molding (PNAM) in cleft lip and palate (CLP) cases and its impact on primary surgical outcomes. Background: Cleft lip and palate (CLP) is one of the most common congenital malformations of the maxillofacial complex. Of all congenital malformations, it ranks third and has a multifactorial etiology. Such anomalies can have several consequences, such as impaired suckling, defective speech, deafness, malocclusion, gross facial deformity, and bring tremendous stress on the entire family. Surgical correction is required to restore the form and function of the affected area; however, surgery has to be usually deferred due to the age of the newborn patients. Case description: A 12-day-old neonate born with a bilateral cleft of lip and alveolus was referred from the Department of Plastic Surgery. PNAM was planned in consultation with the plastic surgeon. A customized nasoalveolar molding plate was fabricated, and tissue molding was carried out. Following nasoalveolar molding, primary surgical repair was done. Conclusion: Significant reduction in cleft width, approximation of soft tissue of the lip, and improvement in nasal tip alignment were achieved following PNAM. It favorably positioned the tissue segment and minimized the extent of the local tissue dissection and advancement. The synchronous prosthodontics and surgical treatment resulted in optimal treatment outcomes. Clinical significance: The higher level of estrogen and hyaluronic acid in the newborn that remodels the cartilage can be utilized through the light application of forces, and hence hard and soft tissue molding can be achieved without surgery. PNAM acts as a promising adjunct prior to primary surgical closure of the CLP. Thus, PNAM immediately after the birth can serve to significantly augment the surgical outcomes and the extent and/or the number of surgeries can be reduced. How to cite this article: Rathee M, Singh K, Alam M, et al. Surgical Assistance for Favorable Outcome Achieved through Presurgical Nasoalveolar Molding Using Innovative Impression Technique: A Case Report. Int J Clin Pediatr Dent 2023;16(1):153-158.

Prosthetic Rehabilitation Following Segmental Maxillectomy Confluent with an Orbital Defect Using a Hollow Orbital Prosthesis Retained Magnetically with an Obturator: A Case Report.

Loss of a sense organ, such as an eye in situations of orbital involvement, or any other bodily part, such as the maxilla or palate, might make one more dependent on others for care and affect how they perceive themselves in society. The prosthetic rehabilitation of large mid-facial defects is a challenging task due to the varied size and shape of the defect. Confluent maxillary and orbital abnormalities are best restored with prosthetic means by creating a comfortable, aesthetically pleasing prosthesis that allows for the restoration of speech, deglutition, and mastication. The retention of any prosthesis is must for it to be successful. The hollow orbital conformer described in this case presentation aids in reducing the weight of the prosthesis, thereby enhancing the retention of the prosthesis. This clinical case presentation highlights the aesthetic and functional rehabilitation using a combined obturator-orbital prosthesis connected using intraoral magnets.

Innovative Customized Pressure Appliance as an Adjuvant in Presurgical Management of Bilateral Multiple Keloid: A Case Report.

Keloid is a benign, long-lasting fibroproliferative mass of dermal connective tissue that forms at the site of cutaneous injury as a result of an unregulated repair and healing process at specific anatomical locations, with a preference for the highly pigmented ethnic group. The use of clips or splints to apply pressure to the affected area is common treatment of keloids; nevertheless, controlling the volume and direction of the keloids might be challenging. The appliance's unique design allows for more precise control over the amount and direction of pressure applied to the scar tissue.

Aesthetic rehabilitation of amputated phalanx by three part mould technique using silicone elastomer - case report.

The unfortunate loss of all or part of a finger caused by traumatic amputation has a negative impact on physical and psychological well-being of a person. Thus an aesthetic prosthesis can offer psychological, functional and rehabilitative advantages. One of the major problems with the prosthetic replacement of a partially amputated finger is inadequate retention of the prosthesis and there are numerous means to enhance the retention. The most routinely used are adhesives, adhesive tape, magnets and implants. The present article describes a technique which utilizes room temperature vulcanizing silicone (RTV) as a prosthetic material retained by preformed artificial rings. Such treatment can be opted for in cases of financial constraints.

Anterior esthetic rehabilitation with full and partial veneers using conventional and digital techniques: A case series.

Effective esthetic rehabilitation requires a proper treatment planning in addition to the associated diagnostic wax-up. For anterior rehabilitation, most dentists favor conservative and esthetic treatments, such as indirect laminate veneer restorations which can be partial- or full-ceramic anterior crowns according to the clinical situations. After the introduction of technologies such as intraoral scanners, dental software for digital restoration design, and additive manufacturing (three-dimensional printing), these techniques further enhanced the digital workflow of restorative therapy. These technologies also fabricate prosthesis with natural esthetics and marginal integrity. This case series discusses the conventional and digitally fabricated full- and partial-ceramic veneers for discolored and misaligned anterior teeth after the fabrication of corresponding diagnostic wax-up.

Surgical Rehabilitation of a Continuous Orbital and Maxillary Defect from Rhino-Orbital Mucormycosis Utilising Digital Technology - A Case Report.

Rationale: COVID-19 has led to a resurgence in cases of mucormycosis, especially the rhino-orbital form affecting the oral cavity, nasal, orbital and cerebral regions. Patient Concerns: The surgical treatment in this patient led to the exenteration of orbital contents and segmental maxillectomy of the affected side leading to facial disfigurement and inability to masticate. Diagnosis: A combined mucormycosis-associated oro-orbital defect was present leading to a communication between oral and orbital cavities. Treatment: Rehabilitation utilising digital technology for removable prosthesis was planned for the combined orbital and oral defect. Outcomes: The independent intraoral and orbital prosthesis reduced the mobility of the orbital prosthesis while performing functional movements. The advancements in digital technology led to the convenient and resilient fabrication of prostheses for large facial defects. Take-away Lessons: The prosthetic rehabilitation of a continuous orbital and oral defect with a hybrid of both digital and conventional means provided an aesthetic, feasible and financially sound solution to the patient.

A Conservative Approach towards Aesthetic, Functional, and Psychological Management of Non-Syndromic Oligodontia Patient: A Case Report with 12-Year Follow-up.

Dental agenesis is the most common developmental aberration in humans, and it is typically linked with a variety of other oral anomalies. Oligodontia, anodontia, and hypodontia are the words used in the literature to denote missing teeth. Although tooth agenesis is not a serious public health problem, it can cause speech, masticatory, aesthetic, and functional problems. A multidisciplinary approach is necessary to establish comprehensive treatment planning, counselling sessions, and frequent follow-ups, to obtain stable, functional, and psychological rehabilitation, which will eventually improves the patient's quality of life. In this case study, after considering the young age and growth of the patient and also his financial status, a conservative approach to rehabilitate the non-syndromic oligodontia patient with a 12-year follow-up and fabrication of maxillary overlay denture and mandibular conventional complete denture has been discussed.

Rehabilitation of orbital exenteration postsquamous cell carcinoma of orbit using magnet retained two-part silicone and acrylic prosthesis: A case report.

ABSTRACT: Orbital exenteration performed to treat various neoplasms or nonmalignant diseases results in functional, aesthetic, and psychological issues for the patients. If reconstructive surgery is not possible or not desired by the patient, an orbital prosthesis is an excellent choice for cosmetic and psychological rehabilitation. An orbital prosthesis is aesthetic, durable, long lasting, cost-effective, and most importantly retentive. The present case report describes the rehabilitation of an orbital exenteration postsquamous cell carcinoma using a two-part prosthesis, in which retention is achieved by a combination of relining of anatomic undercuts and magnets.

Effect of advanced platelet-rich fibrin and concentrated growth factor on tissues around implants in maxillary anterior region.

Aim: To assess the effect of advanced platelet-rich fibrin (APRF) and concentrated growth factor (CGF) on tissues around implants in the maxillary anterior region. Settings and Design: This was a prospective clinical study. Materials and Methods: Thirty subjects were divided into three groups with 10 dental implants in each group, i.e., Group 1: Control group, Group 2: Endosseous implant placement with APRF, and Group 3: Endosseous implant placement with CGF. The subjects were assessed at baseline (at the time of prosthesis placement), 2 weeks, 2 months, 6 months, and 1 year for modified sulcular bleeding index, periimplant probing depth, mucosal suppuration, bleeding on probing, crestal bone level as well as implant stability. Statistical Analysis Used: Oneway Analysis of variance and Post hoc Bonferroni were the statistical tests used. Results: The difference in implant stability at 2 months was significantly (P < 0.05) more among the control and CGF groups compared to APRF group. However; the crestal bone levels, periimplant probing depth, modified sulcular bleeding index, mucosal suppuration, and bleeding on probing were statistically non-significant (P > 0.05). Conclusion: CGF and APRF accelerated osseointegration. Furthermore, they had a positive effect on stabilization values. However, CGF showed better results and with further clinical trials may show a positive effect on implant healing period.

Comparative evaluation of fracture resistance of anterior provisional restorations fabricated using conventional and digital techniques - An in vitro study.

Aim: Comparative evaluation of the fracture resistance of anterior provisional crowns fabricated by conventional and digital techniques. Settings and Design: Department of Prosthodontic, PGIDS, Rohtak, An in-vitro - Comparative study. Materials and Methods: Thirty recently extracted maxillary central incisors were handpicked. Tooth preparation was done according to the principles of tooth preparation. A single-step impression technique was used for impression making of the prepared tooth and stone models were poured. Extracted teeth were divided into 3 groups (n = 10 each) based on provisional crown fabrication technique. A bis-acryl-based (Protemp 4 3M ESPE) resin was used to fabricate the provisional crowns by the conventional indirect technique. The rest of the stone models (20) were scanned using lab scanner (Dentsply Sirona InLab EOS X5). CAD/CAM provisional material (Dentsply Sirona multilayer PolyMethyl Methacrylate) PMMA disc was used for fabrication of provisional restoration through milling technique. 3D printed temporary provisional material (NextDent C&B resin) was utilized for 3D printed provisional crowns. Cementation of provisional crowns was done using eugenol free temporary luting cement (Templute, Prime dental). All cemented provisional crowns were subjected to load under Universal Testing Machine. The maximum load to produce fracture for each specimen was recorded in Newton (N). Statistical Analysis Used: Shapiro-Wilk test was employed to test the normality of data. Kruskal- Wallis Test was used to compare the mean fracture resistance between all the groups. For intergroup comparison Mann-Whitney U Test was used. Results: The mean fracture resistance of group I (Conventional technique) was found to be 558.8459700 ± 22.33 N; for group II (CAD/CAM technique) 960.8427200 ± 37.49 N and for group III (3D Printed technique) 1243.1774000 ± 68.18 N. Group I had the least fracture resistance value while group III showed maximum value. Conclusion: Provisional crowns fabricated using 3-D printing technique showed higher fracture resistance followed by CAD/CAM technique and conventional technique. Additive manufacturing of provisional crowns using 3-D printing technique could be considered a reliable and conservative method for the fabrication of stronger provisional restorations.

Post maxillectomy rehabilitation and amelioration of quality of life of post-COVID rhinocerebral mucormycosis patients using obturator: A case series.

Mucormycosis, a rare fungal infection seen in diabetes, is now very frequent owing to the deadly triad of COVID-19 infection, diabetes, and rampant use of corticosteroids. Early diagnosis and treatment can reduce the mortality and morbidity of this lethal fungal infection. Treatment principles may include antifungal agents along with surgical debridement or resection. The surgically removed palate can have a devastating effect on the appearance and speech of the patient. Obturators allow patients to eat and drink without any suspicion of food entering the oroantral cavities/pharynx during mastication. This case series presented the prosthodontic rehabilitation of nine post-COVID rhinocerebral mucormycosis-infected patients with complete or partial defects.

Resin-bonded bridge as a simplified approach to restore missing teeth in esthetic zone by conventional and digital techniques.

One of the most challenging esthetic concerns in dentistry is conservative replacement of the missing anterior teeth. Although implants are considered to be a better treatment option for rehabilitation of such patients, resin-bonded bridges (RBBs) can conservatively restore the missing teeth and have thus gained popularity over the years. It consists of an artificial tooth with a wing-like extension that is cemented to the adjacent teeth. There are various types of RBBs among which Maryland bridge is the simplest and the popular most due to its micromechanical retention enabled by acid etching of both tooth and metal retainer. It can be fabricated by various techniques and materials. In this case reports, we have discussed about two unique designs of Maryland bridge fabricated by two different materials (Porcelain-fused metal and Graphene) and utilizing two different techniques (conventional and digital).