ABSTRACT
It is challenging to estimate winds accurately from higher altitudes using VHF-MST radar. The current study introduces the Adaptive-Bayesian Deterministic Stochastics Technique (ADStoch), which implements an Empirical Bayesian 1D prediction method using stochastics to analyze radar signals. A new and robust estimator for empirical wavelet shrinkage with Gaussian prior of the nonzero mean for wavelet coefficients is presented, which makes the current prior different from other priors. The mean parameters and the prior covariance hyperparameters follow a pseudo maximum likelihood method for computation. Details on the implemented algorithm developed from scratch using C# are also presented. This technique outperforms contemporary techniques discussed in this context that can recover signals buried in noise established based on the analysis of moment and quality. The estimated Wind is cross-validated for accuracy with the observed wind from the GPS radiosonde operated simultaneously. This technique can consistently extract 3D wind that can reach the range of 25.5 km-28.2 km, improving the conventional maximum altitude of 21.2 km in real time for the MST radar. It is concluded that the ADStoch analysis technique can effectively obtain VHF-MST radar signals at significantly higher altitudes, which is helpful in various scientific investigations.
ABSTRACT
Volatile Organic Compounds (VOCs) play a vital role in tropospheric ozone formation that controls the oxidative capacity of the troposphere. A total of 31 potential ozone precursor VOCs have been measured at a tropical rural site, Gadanki (13.5°N, 79.2°E) in Southern peninsular India. This study provides the primary information about different VOCs, their chemical classification and potential sources. There is a strong seasonal and diurnal variability among the VOC composition. n-Decane and n-dodecane dominate the other VOCs and contribute to a large fraction (>50 %) of the concentration of total VOCs (TVOCs) in winter and summer, monsoon is dominated by n-dodecane and post monsoon season has been dominated by ethane emissions. The source apportionment using interspecies correlation and Positive Matrix Factorisation (PMF) analysis resulted in four potential emission source factors namely biogenic, biomass burning/biofuel, fossil fuel and natural gas emissions. Winter and summer seasons have been dominated by VOCs originating from biomass burning/biofuel factors, monsoon has been dominated by biogenic emissions and post-monsoon season has been dominated by natural gas emissions. Even though it is a rural site, there are significant finger prints of anthropogenic emissions in the form of fossil fuel and natural gas most probably due to an adjacent national highway and long range transport. However, for the overall period, the VOCs emitted from biogenic and biomass burning together dominate the other two factors, indicating the expected source factor behaviour of a rural atmosphere.
ABSTRACT
With the rapidly changing aerosol emissions due to the increase in urbanization, energy consumption, population density, and industrialization in the past two decades across the globe, there is an evolution of different chemical properties of aerosols that are yet not quantified properly. Therefore, a rigorous attempt is made in this study to obtain the long-term changing patterns in the contribution of different aerosol types/species, to the total aerosol loading. This study is carried out only over those regions exhibiting either increasing or decreasing trends in the aerosol optical depth (AOD) parameter on a global scale. Applying the multivariate linear regression trend analysis on Modern-Era Retrospective Analysis for Research and Application version 2 (MERRA-2) aerosol species dataset obtained between 2001 and 2020, we found that despite the overall statistically significant decrease in total columnar AOD trend values over North-Eastern America, and Eastern and Central China regions, an increase in the dust and organic carbon aerosols is observed, respectively. As the uneven vertical distribution of aerosols can alter the direct radiative effects, the extinction profiles of different aerosol types obtained using Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) dataset between 2006 and 2020, are further partitioned, for the first time, based on their presence in different altitudes (i.e., within the atmospheric boundary layer and free-troposphere) as well as measurement timing (i.e., daytime and night-time) regimes. The detailed analysis showed that there exists an overall higher contribution of aerosols persisting in the free troposphere region which in turn can have a long-term effect on climate due to their higher residence time, particularly absorbing aerosols. As the trends are mostly associated with the changes in energy use, regional regulatory policies, and/or changing background meteorology conditions, therefore this study also elaborates on the effectiveness of these factors with the changes obtained in different aerosol species/types over the region.
ABSTRACT
The mutual response between near surface aerosol concentration and surface temperature works in a complicated manner. A recent study has introduced a hypothesis of mutual response between surface temperature and near surface black carbon (BC) mass concentration which states that 'more fall in morning hour surface temperature (T) contribute to the enhancement of BC fumigation peak after the sunrise which positively impacts the extra rise in mid-day temperature over a region during the day time'. Morning hour surface temperature is proportionally linked with the strength of the night time near surface temperature inversion which contributes to the enhancement of the fumigation peak of BC aerosols after the sunrise and the enhanced fumigation peak can impact the degree of the mid-day surface temperature rise by influencing the instantaneous heating. However, it didn't mention the role of non-BC aerosols. Further, the hypothesis was drawn based on the co-located ground-based observations of surface temperature and BC concentration at a rural location of peninsular India. Though, it was mentioned that the hypothesis can be tested independently of locations, but was not thoroughly validated for an urban environment where the loading of both BC and non-BC aerosols are high. In this context, the first objective of the present work is to methodically test the BC -T hypothesis over an Indian metropolitan city, Kolkata, using the suite of measurements obtained from Kolkata Camp Observatory of NARL (KCON) along with other supporting data. In addition, the validity of the hypothesis for the non-BC fraction of PM2.5 aerosols over the same location is also tested. Besides ascertaining the above-mentioned hypothesis over an urban location, it is found that the enhancement of non-BC PM2.5 aerosols peak after the sunrise can negatively influences the mid-day temperature rise over a region during the day time.
ABSTRACT
COVID-19 lockdown has given us an opportunity to investigate the pollutant concentrations in response to the restricted anthropogenic activities. The atmospheric concentration levels of nitrogen dioxide (NO2), carbon monoxide (CO) and ozone (O3) have been analysed for the periods during the first wave of COVID-19 lockdown in 2020 (25th March-31st May 2020) and during the partial lockdowns due to second wave in 2021 (25th March-15th June 2021) across India. The trace gas measurements from Ozone Monitoring Instrument (OMI) and Atmosphere InfraRed Sounder (AIRS) satellites have been used. An overall decrease in the concentration of O3 (5-10%) and NO2 (20-40%) have been observed during the 2020 lockdown when compared with business as usual (BAU) period in 2019, 2018 and 2017. However, the CO concentration increased up to 10-25% especially in the central-west region. O3 and NO2 slightly increased or had no change in 2021 lockdown when compared with the BAU period, but CO showed a mixed variation prominently influenced by the biomass burning/forest fire activities. The changes in trace gas levels during 2020 lockdown have been predominantly due to the reduction in the anthropogenic activities, whereas in 2021, the changes have been mostly due to natural factors like meteorology and long-range transport, as the emission levels have been similar to that of BAU. Later phases of 2021 lockdown saw the dominant effect of rainfall events resulting in washout of pollutants. This study reveals that partial or local lockdowns have very less impact on reducing pollution levels on a regional scale as natural factors like atmospheric long-range transport and meteorology play deciding roles on their concentration levels.
Subject(s)
Air Pollutants , Air Pollution , COVID-19 , Environmental Pollutants , Ozone , Humans , COVID-19/epidemiology , Air Pollution/analysis , Air Pollutants/analysis , Nitrogen Dioxide/analysis , Environmental Monitoring/methods , Communicable Disease Control , Ozone/analysis , Environmental Pollutants/analysis , Particulate Matter/analysisABSTRACT
The design, principles of operation, calibration, and data analysis approaches of the Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) on the NASA Ionospheric Connection (ICON) satellite have been documented prior to the ICON launch. Here we update and expand on the MIGHTI wind data analysis and discuss the on-orbit instrument performance. In particular, we show typical raw data and we describe key processing steps, including the correction of a "signal-intensity dependent phase shift," which is necessitated by unexpected detector behavior. We describe a new zero-wind calibration approach that is preferred over the originally planned approach due to its higher precision. Similar to the original approach, the new approach is independent of any a priori data. A detailed update on the wind uncertainties is provided and compared to the mission requirements, showing that MIGHTI has met the ICON mission requirements. While MIGHTI observations are not required to produce absolute airglow brightness profiles, we describe a relative brightness profile product, which is included in the published data. We briefly review the spatial resolution of the MIGHTI wind data in addition to the data coverage and data gaps that occurred during the nominal mission. Finally, we include comparisons of the MIGHTI wind data with ground-based Fabry-Perot interferometer observations and meteor radar observations, updating previous studies with more recent data, again showing good agreement. The data processing steps covered in this work and all the derived wind data correspond to the MIGHTI data release Version 5 (v05).
ABSTRACT
In order to be used in food packaging, the study aims to develop a composite film based on microcrystalline cellulose (MCC) and coated with silver nanoparticles (AgNPs). The MCC was derived from sugar cane bagasse. Protein, starch, and poly-ethylene glycol 1500 (PEG-1500) are employed to improve the tensile strength, flexibility, and durability of the packaging film. The AgNPs was synthesized by a green route employing Azadirachtaindica leaf extract as reducing agent. The determined average crystallite size of AgNPs was seen at 20 nm. The X-ray diffraction (XRD) studies of the final film prepared have an elevated peak with a crystallinity of 37.5%. The scanning electron microscopic images (SEM) of the AgNPs and the prepared samples, reveal their surface morphology. The Fourier transform infrared spectroscopic studies (FT-IR) disclose the functional group changes during the film preparation. The antibacterial activity of the amalgamated AgNPs against five bacterial pathogens studied was found to be highly active against tested food pathogens, except for Proteus vulgari. When coated over a vegetable, the produced nanocomposite film displayed an increased shelf life for the vegetable by limiting the decay impact caused by food pathogens. According to the findings, the AgNPs-impregnated MCC/Starch/Whey protein has the potential to be employed as an antimicrobial packaging material.
Subject(s)
Azadirachta , Food Packaging , Metal Nanoparticles , Nanocomposites , Plant Extracts , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Azadirachta/chemistry , Metal Nanoparticles/chemistry , Nanocomposites/chemistry , Plant Extracts/chemistry , Plant Extracts/pharmacology , Silver/chemistry , Spectroscopy, Fourier Transform Infrared , Starch , Whey Proteins , X-Ray DiffractionABSTRACT
The COVID-19 pandemic lockdown has led to the significant reductions in the pollutant levels across the globe. Several studies have been carried out for examining and quantifying the improvement in the air quality due to the reduction of the pollution at the surface. Unlike most of the studies carried out earlier on COVID-19 lockdown, this study investigates the role of the dynamics on the vertical distribution of the trace gases (Carbonmonoxide (CO), Water Vapor (WV) and Ozone (O3)) over India in the Boundary Layer (BL), Middle Troposphere (MT) and Upper Troposphere (UT) during COVID-19 lockdown using satellite observations and re-analysis data products obtained during 2010-2020. Substantial differences in the time series and variability have been observed over different zones of India in different atmospheric layers. The changes observed in these species are large over Central India compared to South India and Indo-Gangetic plain regions. An enhancement in CO (~25-40%) and WV (50-60%) has been noticed over Central India in the UT at 147 hPa and 215 hPa, respectively, during lockdown. The strong updrafts before the lockdown and the extended weak zonal wind aloft over this region are found responsible for the observed enhancement in these trace gases in the UT. In spite of the non-availability of the anthropogenic pollution during the lockdown, this study highlights the transport of pollutants through long-range transport (always present even before lockdown) dominance over the Indian region not only near the surface but also aloft due to associated atmospheric dynamics.
ABSTRACT
Plastics play a significant part in human life and the world we live in. The use of plastics results in detrimental effects on the natural world, which compels us to look for viable replacements. As a result of their enhanced capacity to biodegrade, bioplastics are becoming increasingly important materials. In recent years, there has been a rapid ascent in the utilization of biopolymers in various applications. The objective of this research is to investigate the impact that silica obtained from rice hull ash (RHA) and microcrystalline cellulose (MCC) obtained from groundnut husk have on the properties of bioplastic obtained from wheat gluten and fish scales. The usage of fish scales has been shown to have a positive effect on weight reduction and debasement rates. Microcrystalline cellulose (MCC) is utilized in a wide range of concentrations, and the influence of MCC on bioplastic is researched. The biodegradability tests of bioplastic revealed that the plastic lost 35% of its weight in just 14 days. The experiments that were done to evaluate the chemical stability and tensile strength of the bioplastic indicated that the MCC content has a significant effect in improving the characteristics of the material.
ABSTRACT
The municipal wastewater may be treated using a number of different types of fixed beds that have a larger surface area. Since the fibrous materials have such a large specific surface area, they are frequently considered to be the best option for greater microbiological support and treatment efficacy. In this research, natural fibre materials such as coir fibre and areca husk were investigated for their potential to function as fixed aerated beds for the treatment of municipal wastewater. During the experiment, variations in the chemical oxygen demand (COD), biological oxygen demand (BOD), total dissolved solids (TDS), and total suspended solids (TSS) of the effluent were used to determine how well the aerated fixed bed work in treating the wastewater. The most efficient operating parameters for the successful treatment of wastewater were determined to be a contact period of 72 hrs, a filter medium depth of 5 cm, and a packing density of 10 kg/m3. The reductions in BOD, COD, TDS, and TSS for coir fibre are 55%, 58.8%, 57.8%, and 51.89%, respectively, whereas the reductions for areca husk are 38.3%, 37.78%, 31.76%, and 30.56%, respectively. In the course of this experiment, the coir fibre was discovered to be marginally more effective in comparison to the areca husk.
ABSTRACT
Accurate renditions of country-scale methane (CH4) emissions are critical in understanding the regional CH4 budget and essential for adapting national climate mitigation policies to curtail the atmospheric build-up of this greenhouse gas with high warming potential. India housing 30% of the Asian population is currently appraised as a region of CH4 source based on the inventories. To date, there have not been many reported efforts to estimate the regional CH4 emissions using direct measurements of boundary layer CH4 concentrations at multiple locations over India. Here, 2 years (2017-2018) of in situ CH4 observations from three distantly placed stations over the peninsular India is combined with state-of-the-art inversion using a Lagrangian particle dispersion model for the estimation of CH4 emission. This study updates CH4 emission over the peninsular India (land area south of 21.5°N) as ~ 10.63 Terra gram (Tg) CH4 year-1, which is 0.13 Tg CH4 year-1 higher than the existing inventory-based emission. On seasonal scale, the changes from the existing CH4 emission inventories are 0.12, 0.05, 0.055 and 0.28 Tg CH4 year-1 during winter, pre-monsoon, monsoon and post-monsoon seasons respectively. Spatial distributions of seasonal variability of posterior emissions suggest an enhancement over the eastern region of peninsular India compared to the western part. The study with observations from three stations over the peninsular India provides an update on the inventory-based estimation of CH4 emissions and urges the importance of more observations over the Indian region for the accurate estimation of fluxes.
Subject(s)
Greenhouse Gases , Methane , Carbon Dioxide/analysis , Climate , Environmental Monitoring , Methane/analysis , SeasonsABSTRACT
The abrupt reduction in the human activities during the first lockdown of the COVID-19 pandemic created unprecedented changes in the background atmospheric conditions. Several studies reported the anthropogenic and air quality changes observed during the lockdown. However, no attempts are made to investigate the lockdown effects on the Atmospheric Boundary Layer (ABL) and background instability processes. In this study, we assess the lockdown impacts on the ABL altitude and instability parameters (Convective Available Potential Energy (CAPE) and Convective Inhibition Energy (CINE)) using WRF model simulations. Results showed a unique footprint of COVID-19 lockdown in all these parameters. Increase in the visibility, surface temperature and wind speed and decrease in relative humidity during the lockdown is noticed. However, these responses are not uniform throughout India and are significant in the inland compared to the coastal regions. The spatial variation of temperature (wind speed) and relative humidity shows an increase and decrease over the Indo Gangetic Plain (IGP) and central parts of India by 20% (100%) and 40%, respectively. Increase (80%) in the ABL altitude is larger over the IGP and central parts of India during lockdown of 2020 compared to similar time period in 2015-2019. This increase is attributed to the stronger insolation due to absence of anthropogenic activity and other background conditions. At the same time, CAPE decreased by 98% in the IGP and central parts of India, where it shows an increase in other parts of India. A prominent strengthening of CINE in the IGP and a weakening elsewhere is also noticed. These changes in CAPE and CINE are mainly attributed to the dearth of saturation in lower troposphere levels, which prevented the development of strong adiabatic ascent during the lockdown. These results provide a comprehensive observation and model-based insight for lockdown induced changes in the meteorological and thermo-dynamical parameters.
Subject(s)
Air Pollutants , Air Pollution , COVID-19 , Air Pollutants/analysis , Air Pollution/analysis , COVID-19/epidemiology , Communicable Disease Control , Environmental Monitoring/methods , Humans , Pandemics , Particulate Matter/analysisABSTRACT
The overarching goal of this paper is to shed light on the human influence on the changing patterns of heat waves in India using the Heat Wave Magnitude Index daily (HWMId). The HWMId obtained from the observational data sets shows a large increase in the heat waves during the past decades. Investigating the effects of natural (e.g., solar variations and volcanic forcings) and anthropogenic (e.g., greenhouse gas emissions, anthropogenic, land use, and land cover) forcings revealed that the anthropogenic factors have cause a two-fold increase in the occurrence probability of severe heat waves in central and mid-southern India during twentieth century. The spatial distribution of maximum HWMId values under natural and all forcings (including anthropogenic) indicates that in most places human activities have increases the frequency, duration and intensity of extreme heat waves. Under the Representative Concentration Pathway (RCP) 4.5, the risk of heat waves is projected to increase tenfold during the twenty-first century. More than ~ 70% of the land areas in India is projected to be influenced by heat waves with magnitudes greater than 9. Furthermore, we find a significant relationship between heat waves and deficits in precipitation. Results show that concurrent heat waves and droughts are projected to increase in most places in India during the twenty-first century.
Subject(s)
Extreme Heat , Hot Temperature , Droughts , Extreme Heat/adverse effects , Human Activities , Humans , IndiaABSTRACT
The drinking water quality was evaluated in order to provide a continuous supply of clean and safe drinking water for the preservation of public health. The study area consists of three villages: Tulube, Seddo, and Serdo, all of which are located near Mettu town, which is about 550 kilometers south-west of Ethiopia's capital, Addis Ababa. The physical and chemical parameters of the collected drinking water samples were assessed, including pH, turbidity, conductivity, total suspended solids (TSS), total dissolved solids (TDS), and the presence of heavy metals. The samples were examined in the laboratory, and the findings were compared to the World Health Organization (WHO) standards. Almost all of the physiochemical indicators were safe and within the permissible limit for drinking water quality. However, lead ion concentrations were found to be above the WHO standards. An adsorbent produced from banana pseudostems was used to remove lead ions from drinking water. The equilibrium parameters were determined using the Langmuir adsorption isotherm. The drinking water was treated for 4 h in a homemade adsorption column composed of filter medium (sand, charcoal, and powder of treated banana pseudostem). The data revealed that lead ions removal was nearly 70%, but still above the WHO standards.
ABSTRACT
It is well known that the atmospheric boundary layer (ABL) plays a significant role in controlling the variability of atmospheric constituents such as aerosols and trace-gases. Hence, significant diurnal and seasonal variation in these will be observed as the ABL altitude does. However, on several occasions, high aerosol concentration in the lidar measurements is observed even above the ABL altitude. This raised a question that up to what extent ABL altitude acts as a capping layer for these pollutants? From the detailed analysis carried out using long-term (2010-2018) lidar observations and simultaneous radiosonde profiles obtained from Gadanki, India, we show that 'there exist thermal inversions (TI), which are stronger than the ABL inversions, that fully control the vertical extent'. The detailed characteristics of TI (inversion strength (IS) and inversion depth (ID)) are also obtained. The results revealed that aerosol concentrations below the TI altitude increases with IS (ID) up to 3-4 K (300-400 m) during winter whereas in pre-monsoon it increases up to 2-3 K (100-200 m). Thus, IS of up to 2-4 K is required to fully trap the aerosol concentrations and this TI coincide with the ABL inversions for 51.7% only, particularly during the winter and pre-monsoon seasons. This analysis is further extended to different geographical locations of India using the aerosol profiles obtained from CALIPSO and a network of 23 radiosonde stations. The observed results provided further evidence that the vertical distribution of aerosols is restricted to the maximum extent by the TI but not the ABL altitude. These observations lead us to propose a hypothesis that 'trapping of aerosols fully occurs up to particular IS and ID only and the ABL altitude is not the deciding factor most of the time for capping the aerosol vertical distribution'. These findings will greatly help in modeling the diffusion and transport of air pollutants in the lower troposphere.
Subject(s)
Air Pollutants , Altitude , Aerosols/analysis , Air Pollutants/analysis , Environmental Monitoring , SeasonsABSTRACT
We compare coincident thermospheric neutral wind observations made by the Michelson Interferometer for Global High-Resolution Thermospheric Imaging (MIGHTI) on the Ionospheric Connection Explorer (ICON) spacecraft, and four ground-based specular meteor radars (SMRs). Using the green-line MIGHTI channel, we analyze 1158 coincidences between Dec 2019 and May 2020 in the altitude range from 94 to 104 km where the observations overlap. We find that the two datasets are strongly correlated (r = 0.82) with a small mean difference (4.5 m/s). Although this agreement is good, an analysis of known error sources (e.g., shot noise, calibration errors, and analysis assumptions) can only account for about a quarter of the disagreement variance. The unexplained variance is 27.8% of the total signal variance and could be caused by unknown errors. However, based on an analysis of the spatial and caused by temporal variability of the wind on scales â²70 min. The observed magnitudes agree well during temporal averaging of the two measurement modalities, we suggest that some of the disagreement is likely the night, but during the day, MIGHTI observes 16%-25% faster winds than the SMRs. This remains unresolved but is similar in certain ways to previous SMR-satellite comparisons.
ABSTRACT
Changing patterns in aerosol concentrations over the Asian region is well documented with a concurrent increase over India and a marked reduction over China. However, aerosol vertical distribution in the changing climate is not fully understood. By combining long-term satellite observations from MODIS and CALIOP, here we show rapid changes in the aerosol vertical distribution over the South and East Asia covering India and China. A statistically significant decreasing (increasing) trend in the boundary layer (free troposphere) aerosol concentrations is noticed over India. ERA-Interim reanalysis model suggests that this increase in free tropospheric aerosol concentrations are due to the lifting of boundary layer pollutants through an increase in convection (and vertical velocity) in a changing climate. In contrast, a consistent decreasing trend is observed over China irrespective of the altitude. Interestingly, a decreasing trend in Aerosol Optical Depth is observed over the northwest India and we relate this to an observed increase in precipitation leading to increase in the vegetation. It is also found that long-term oscillations like QBO, ENSO and solar cycle significantly affect the aerosol concentrations. Thus, it is prudent to conclude that background meteorology and dynamics play an important role in changing patterns of aerosol vertical distribution.
ABSTRACT
Phase-wise variations in different aerosol (BC, AOD, PM1, PM2.5 and PM10), radiation (direct and diffused) and trace gases (NO, NO2, CO, O3, SO2, CO2 and CH4) and their associated chemistry during the COVID-19 lockdown have been investigated over a tropical rural site Gadanki (13.5° N, 79.2° E), India. Unlike most of the other reported studies on COVID-19 lockdown, this study provides variations over a unique tropical rural environment located at a scientifically strategic location in the Southern Indian peninsula. Striking differences in the time series and diurnal variability have been observed in different phases of the lockdown. The levels of most species that are primarily emitted from anthropogenic activities reduced significantly during the lockdown which also impacted the levels and diurnal variability of secondary species like O3. When compared with the same periods in 2019, short-lived trace gas species such as NO, NO2, SO2 which have direct anthropogenic emission influence have shown the reduction over 50%, whereas species like CO and O3 which have direct as well as indirect impacts of anthropogenic emissions have shown reductions up to 10%. Long-lived species (CO2 and CH4) have shown negligible difference (<1%). BC and AOD have shown reductions over 20%. Particulate Matter (1, 2.5 and 10) reductions have been in the range of 40 to 50% when compared to the pre-lockdown period. The changes in shortwave downward radiation at the surface, diffuse component due to the scattering and diffuse fraction have been +2.2%, -4.1% and -2.4%, respectively, in comparison with 2019. In contrast with the studies over urban environments, air quality category over the rural environment remained same during the lockdown despite reduction in pollutants level. All the variations observed for different species and their associated chemistry provides an excellent demonstration of rural atmospheric chemistry and its intrinsic links with the precursor concentrations and dynamics.
Subject(s)
Air Pollutants , Air Pollution , COVID-19 , Radiation , Aerosols/analysis , Air Pollutants/analysis , Air Pollution/analysis , Communicable Disease Control , Environmental Monitoring , Gases , Humans , India , Particulate Matter/analysis , SARS-CoV-2ABSTRACT
The mutual response between surface temperature and the mass concentration of regional black carbon (BC) aerosols has still remained far from understanding due to its complex nature. A detailed analysis presented in this study using long-term data indicates a significant pattern of mutual response between surface temperature and BC in restricted background weather conditions (water vapor, cloud cover and wind speeds). The analysis shows that a fall in surface temperature which naturally occurs daily after the sunrise, leads to the development of a stronger inversion in the near-surface level and this, in turn, contributes to the enhancement of BC fumigation peak. Further, the enhanced fumigation peak (especially during pre-monsoon) is found positively influencing the mid-day temperature rise possibly due to the immediate impact of the direct radiative forcing of BC aerosols. These observations lead us to consider a hypothesis that 'an extra fall in the morning hour surface temperature contributes to the enhancement of BC fumigation peak and can degrade the morning hour air quality which gives positive feedback to the mid-day temperature rise over a region'. A substantial in situ data [over Gadanki (13.5°N, 79.2°E)] along with MERRA-2 and ERA-5 data are used in this methodical analysis. Moreover, the validity of the hypothesis has been tested over other locations. Regional weather and seasonal cycle are found to have apparent interference with the feature of the observed mutual response pattern. The results from this study clearly indicate that the approach used, can be executed location independently.
ABSTRACT
Black carbon (BC) aerosol emitted in incomplete combustion processes is known for causing warming in the climate system also poses serious health issues. Identification of the sources of BC is essential for the development of mitigation strategies to regulate their effects in changing climate. Among different observational and analytical techniques currently available, source apportionment methods based on optical measurements are relatively simple. For example, 'Aethalometer model' was developed based on Aethalometer observations. However, there are a few limitations with this model arising from assumption of wavelength and angstrom exponent pairs. We have developed an empirical method which also relies on Aethalometer observations named as 'Two alpha method' which assumes angstrom exponent from fossil fuel as 1 and estimates bio-mass fraction and angstrom exponent for bio-mass burning. This method has been applied to Aethalometer observations from five different locations (rural, semi-urban and urban) over Indian sub-continent to quantify sources of BC. Fossil fuel is found to be the major source of BC (â¼70%) irrespective of the location. Collocated measurements of Carbon Monoxide (CO) over rural site correlated well with derived bio-mass fraction. Results from this study demonstrated the capabilities of empirical method and shall provide spatio-temporal variability in sources of BC if applied to more locations.