ABSTRACT
Pipe fouling is a challenging problem in many industrial applications. Current cleaning techniques require halting the production during the cleaning phase and the existing methods are unable to do targeted cleaning, even though fouling is often localized to certain areas inside the pipeline. To address this issue, we use FEM-simulated, time-reversed signals to focus ultrasound power onto a pre-determined location: a fouled pipe residing inside a Plexiglas container. Ultrasound cleaning with similar acoustic power was compared to the time-reversal enhanced method in terms of cleaning efficiency. The cleaning efficiency was determined by measuring how much fouling, by mass, both protocols removed from the surface of a Plexiglas pipe, using similar input electric power and equal cleaning time. Our results indicate that the proposed time-reversal-based technique removes three times more fouling than the standard ultrasound cleaning without focusing. The study extends our previous paper on FEM-based time-reversal focusing [1].
ABSTRACT
Electrospinning is commonly used to produce polymeric nanofibers. Potential applications for such fibers include novel drug delivery systems, tissue engineering scaffolds, and filters. Electrospinning, however, has shortcomings such as needle clogging and limited ability to control the fiber-properties in a non-chemical manner. This study reports on an orifice-less technique that employs high-intensity focused ultrasound, i.e. ultrasound-enhanced electrospinning. Ultrasound bursts were used to generate a liquid protrusion with a Taylor cone from the surface of a polymer solution of polyethylene oxide. When the polymer was charged with a high negative voltage, nanofibers jetted off from the tip of the protrusion landed on an electrically grounded target held at a constant distance from the tip. Controlling the ultrasound characteristics permitted physical modification of the nanofiber topography at will without using supplemental chemical intervention. Possible applications of tailor-made fibers generated by ultrasound-enhanced electrospinning include pharmaceutical controlled-release applications and biomedical scaffolds with spatial gradients in fiber thickness and mechanical properties.
ABSTRACT
We produced a 1 km continuous piece of multifilament electric solar wind sail tether of µm-diameter aluminum wires using a custom made automatic tether factory. The tether comprising 90,704 bonds between 25 and 50 µm diameter wires is reeled onto a metal reel. The total mass of 1 km tether is 10 g. We reached a production rate of 70 m/24 h and a quality level of 1 loose bonds and 2 rebonded ones. We thus demonstrated that production of long electric solar wind sail tethers is possible and practical.
