ABSTRACT
Electron-phonon interactions, crucial in condensed matter, are rarely seen in Metal-Organic Frameworks (MOFs). Detecting these interactions typically involves analyzing luminescence in lanthanide- or actinide-based compounds. Prior studies on Ln- and Ac-based MOFs at high temperatures revealed additional peaks, but these were too faint for thorough analysis. In our research, we fabricated a high-quality, crystalline uranium-based MOF (KIT-U-1) thin film using a layer-by-layer method. Under UV light, this film showed two distinct "hot bands," indicating a strong electron-phonon interaction. At 77â K, these bands were absent, but at 300â K, a new emission band appeared with half the intensity of the main luminescence. Surprisingly, a second hot band emerged above 320â K, deviating from previous findings in rare-earth compounds. We conducted a detailed ab-initio analysis employing time-dependent density functional theory to understand this unusual behaviour and to identify the lattice vibration responsible for the strong electron-phonon coupling. The KIT-U-1 film's hot-band emission was then utilized to create a highly sensitive, single-compound optical thermometer. This underscores the potential of high-quality MOF thin films in exploiting the unique luminescence of lanthanides and actinides for advanced applications.
ABSTRACT
Gas-phase infiltration of the carbonylchloridogold(I), Au(CO)Cl precursor into the pores of HKUST-1 ([Cu3(BTC)2(H2O)2], Cu-BTC) SURMOFs (surface-mounted metal-organic frameworks; BTC = benzene-1,3,5-tricarboxylate) leads to Au(CO)Cl decomposition within the MOF through hydrolysis with the aqua ligands on Cu. Small Aux clusters with an average atom number of x ≈ 5 are formed in the medium-sized pores of the HKUST-1 matrix. These gold nanoclusters are homogeneously distributed and crystallographically ordered, which was supported by simulations of the powder X-ray diffractometric characterization. Aux@HKUST-1 was further characterized by scanning electron microscopy (SEM) and infrared reflection absorption (IRRA) as well as Raman spectroscopy, time-of-flight secondary ion mass spectrometry (ToF-SIMS), X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma optical emission spectroscopy (ICP-OES).
ABSTRACT
For the first time, a procedure has been established for the growth of surface-anchored metal-organic framework (SURMOF) copper(II) benzene-1,4-dicarboxylate (Cu-BDC) thin films of thickness control with single molecule accuracy. For this, we exploit the novel method solution atomic layer deposition (sALD). The sALD growth rate has been determined at 4.5 Å per cycle. The compact and dense SURMOF films grown at room temperature by sALD possess a vastly superior film thickness uniformity than those deposited by conventional solution-based techniques, such as dipping and spraying while featuring clear crystallinity from 100 nm thickness. The highly controlled layer-by-layer growth mechanism of sALD proves crucial to prevent unwanted side reactions such as Ostwald ripening or detrimental island growth, ensuring continuous Cu-BDC film coverage. This successful demonstration of sALD-grown compact continuous Cu-BDC SURMOF films is a paradigm change and provides a key advancement enabling a multitude of applications that require continuous and ultrathin coatings while maintaining tight film thickness specifications, which were previously unattainable with conventional solution-based growth methods.
ABSTRACT
We experimentally and theoretically investigate the thermal conductivity and mechanical properties of polycrystalline HKUST-1 metal-organic frameworks (MOFs) infiltrated with three guest molecules: tetracyanoquinodimethane (TCNQ), 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ), and (cyclohexane-1,4-diylidene)dimalononitrile (H4-TCNQ). This allows for modification of the interaction strength between the guest and host, presenting an opportunity to study the fundamental atomic scale mechanisms of how guest molecules impact the thermal conductivity of large unit cell porous crystals. The thermal conductivities of the guest@MOF systems decrease significantly, by on average a factor of 4, for all infiltrated samples as compared to the uninfiltrated, pristine HKUST-1. This reduction in thermal conductivity goes in tandem with an increase in density of 38% and corresponding increase in heat capacity of â¼48%, defying conventional effective medium scaling of thermal properties of porous materials. We explore the origin of this reduction by experimentally investigating the guest molecules' effects on the mechanical properties of the MOF and performing atomistic simulations to elucidate the roles of the mass and bonding environments on thermal conductivity. The reduction in thermal conductivity can be ascribed to an increase in vibrational scattering introduced by extrinsic guest-MOF collisions as well as guest molecule-induced modifications to the intrinsic vibrational structure of the MOF in the form of hybridization of low frequency modes that is concomitant with an enhanced population of localized modes. The concentration of localized modes and resulting reduction in thermal conductivity do not seem to be significantly affected by the mass or bonding strength of the guest species.
ABSTRACT
This investigation on metal-organic framework (MOF) HUKUST-1 films focuses on comparing the undoped pristine state and with the case of doping by TCNQ infiltration of the MOF pore structure. We have determined the temperature dependent charge transport andp-type conductivity for HKUST-1 films. Furthermore, the electrical conductivity and the current-voltage characteristics have been characterized in detail. Because the most common forms of MOFs, bulk MOF powders, do not lend themselves easily to electrical characterization investigations, here in this study the electrical measurements were performed on dense, compact surface-anchored metal-organic framework (SURMOF) films. These monolithic, well-defined, and (001) preferentially oriented MOF thin films are grown using quasi-liquid phase epitaxy (LPE) on specially functionalized silicon or borosilicate glass substrates. In addition to the pristine SURMOF films also the effect of loading these porous thin films with TCNQ has been investigated. Positive charge carrier conduction and a strong anisotropy in electrical conduction was observed for highly oriented SURMOF films and corroborated with Seebeck coefficient measurements. Van der Pauw four-point Hall sample measurements provide important insight into the electrical behavior of such porous and hybrid organic-inorganic crystalline materials, which renders them attractive for potential use in microelectronic and optoelectronic devices and thermoelectric applications.
ABSTRACT
Lanthanide-based crystalline coatings have a great potential for energy-conversion devices, but until now luminescent surface-anchored materials were difficult to fabricate. Thin films, called lanthanides surface-mounted metal-organic frameworks (SURMOFs) with tetrasubstituted halide (fluorine, chlorine, and bromine) terephthalic acid derivative linkers as a basic platform for optical devices, exhibit a high quantum yield of fluorescence visible to the naked eyes under ambient light. We show that we can tune the luminescent properties in thin films by halide substitution, which affords control over the molecular structure of the material. We rationalize the mechanism for the modulation of the photophysical properties by "antenna effect", which controls the energy transfer and quantum yields using experimental and theoretical techniques for chelated lanthanides as a function of the type of atom substitutions at the phenyl rings and the resulting dihedral angle between phenyl rings in the linkers and carboxylate groups.
ABSTRACT
Whether the presence of adsorbates increases or decreases thermal conductivity in metal-organic frameworks (MOFs) has been an open question. Here we report observations of thermal transport in the metal-organic framework HKUST-1 in the presence of various liquid adsorbates: water, methanol, and ethanol. Experimental thermoreflectance measurements were performed on single crystals and thin films, and theoretical predictions were made using molecular dynamics simulations. We find that the thermal conductivity of HKUST-1 decreases by 40 - 80% depending on the adsorbate, a result that cannot be explained by effective medium approximations. Our findings demonstrate that adsorbates introduce additional phonon scattering in HKUST-1, which particularly shortens the lifetimes of low-frequency phonon modes. As a result, the system thermal conductivity is lowered to a greater extent than the increase expected by the creation of additional heat transfer channels. Finally, we show that thermal diffusivity is even more greatly reduced than thermal conductivity by adsorption.
ABSTRACT
The increased utilization of one-dimensional (1D) TiO2 and titanate nanowires (TNWs) in various applications was the motivation behind studying their stability in this work, given that stability greatly influences both the success of the application and the environmental impact. Due to their high abundance in aqueous environments and their rich technological applicability, surfactants are among the most interesting compounds used for tailoring the stability. The aim of this paper is to determine the influence of surfactant molecular structure on TNW stability/aggregation behavior in water and aqueous NaBr solution by dynamic and electrophoretic light scattering. To accomplish this, two structurally different quaternary ammonium surfactants (monomeric DTAB and the corresponding dimeric 12-2-12) at monomer and micellar concentrations were used to investigate TNW stability in water and NaBr. It was shown that TNWs are relatively stable in Milli-Q water. However, the addition of NaBr induces aggregation, especially as the TNW mass concentration increases. DTAB and 12-2-12 adsorb on TNW surfaces as a result of the superposition of favorable electrostatic and hydrophobic interactions. As expected, the interaction of TNWs with 12-2-12 was stronger than with DTAB, due to the presence of two positively charged head groups and two hydrophobic tails. As a consequence of the higher adsorption of 12-2-12, TNWs remained stable in both media, while DTAB showed an opposite behavior. In order to gain more insight into changes in the surface properties after surfactant adsorption on the TNW surface, a surface complexation model was employed. With this first attempt to quantify the contribution of the surfactant structure on the adsorption equilibrium according to the observed differences in the intrinsic log K values, it was shown that 12-2-12 interacts more strongly with TNWs than DTAB. The modelling results enable a better understanding of the interaction between TNWs and surfactants as well as the prediction of the conditions that can promote stabilization or aggregation.
ABSTRACT
We describe a non-conventional, MOF-based approach with modified linkers to fabricate 3D Bi2O3 supracrystals. The nanoparticle (NP) assembly exhibits bcc-packing, which is difficult to achieve with other methods. The NPs possess a very narrow size distribution. The individual NPs were synthesized inside the pores of a surface-mounted metal-organic framework (SURMOF) template via a photo-decomposition procedure. The supracrystals were thoroughly characterized using X-ray diffraction (XRD), infrared (IR) and Raman spectroscopy as well as high-resolution transmission electron microscopy (HR-TEM) and SAED (Selected Area Electron Diffraction). In order to achieve sharp size distributions of the NPs, the pores within the SURMOF were functionalized with amino (-NH2) functional groups acting as nucleation centers. MOFs lacking such additional functionalities, Cu3(BTC)2, yielded much broader size distributions. These findings provide a unique molecular design tool for creating nanometer-sized reaction compartments for the synthesis of supracrystals with packing types not accessible via self-assembly.
ABSTRACT
When chromophores are brought into close proximity, noncovalent interactions (π-π/CH-π) can lead to the formation of excitonically coupled states, which bestow new photophysical properties upon the aggregates. Because the properties of the new states not only depend on the strength of intermolecular interactions, but also on the relative orientation, supramolecular assemblies, where these parameters can be varied in a deliberate fashion, provide novel possibilities for the control of photophysical properties. This work reports that core-substituted naphthalene diimides (cNDIs) can be incorporated into surface-mounted metal- organic structures/frameworks (SURMOFs) to yield optical properties strikingly different from conventional aggregates of such molecules, for example, formed in solution or by crystallization. Organic linkers are used, based on cNDIs, well-known organic chromophores with numerous applications in different optoelectronic devices, to fabricate MOF thin films on transparent substrates. A thorough characterization of the properties of these highly ordered chromophoric assemblies reveals the presence of non-emissive excited states in the crystalline material. Structural modulations provide further insights into the nature of the coupling that gives rise to an excited-state energy level in the periodic structure.
ABSTRACT
We describe a novel procedure to fabricate WO3@surface-mounted metal-organic framework (SURMOF) hybrid materials by electrodeposition of WO3 nanoparticles into HKUST-1, also termed Cu3(BTC)2 SURMOFs. These materials have been characterized using x-ray diffraction, time-of-flight secondary ion mass spectrometry, scanning electron microscopy, x-ray photoelectron spectroscopy as well as linear sweep voltammetry. The WO3 semiconductor/SURMOF heterostructures were further tested as hybrid electrodes in their performance for hydrogen evolution reaction from water.
ABSTRACT
Triplet transfer across a surface-anchored metal-organic-framework heterojunction is demonstrated by the observation of triplet-triplet annihilation photon -upconversion in a sensitizer-emitter heterostructure. Upconversion thresholds under 1 mW cm-2 are achieved. In the broader context, the double-electron-exchange mechanism of triplet transfer indicates that the heterojunction quality is sufficient for electrons to move between layers in this solution-processed crystalline heterostructure.
ABSTRACT
The large surface area of metal-organic frameworks (MOFs) sparks great interest for their use in storage applications. While the bulk of MOF applications focuses on incorporation of gases, we demonstrate that these highly porous frameworks are also well-suited for metal ion storage. For well-defined, highly oriented surface-anchored MOF thin films grown on modified gold surfaces using liquid-phase epitaxy (LPE), also referred to as SURMOFs, we determined the loading of two different types of MOF materials with a total of seven types of metal ions (Zn(2+), Ag(+), Pd(2+), Fe(3+), Cd(2+), Ni(2+), and Co(2+)). Measurements using a quartz crystal microbalance (QCM) allowed determination of loading capacities as well as diffusion constants in a quantitative fashion. The adsorption capacities were observed to be highly ion specific; the largest uptake was for Fe(3+) and Pd(2+) ions with six and four metal ions per MOF pore, respectively. By comparing results for SURMOFs fabricated from different types of linkers, we demonstrate that S-containing functionalities in particular drastically improve the storage capacity of MOFs for metal ions.
ABSTRACT
We describe a novel procedure to fabricate a recyclable hybrid-photocatalyst based on Bi2O3@HKUST-1 MOF porous thin films. Bi2O3 nanoparticles (NPs) were synthesized within HKUST-1 (or Cu3(BTC)2) surface-mounted metal-organic frame-works (SURMOFs) and characterized using X-ray diffraction (XRD), a quartz crystal microbalance (QCM) and transmission electron microscopy (TEM). The Bi2O3 semiconductor NPs (diameter 1-3 nm)/SURMOF heterostructures exhibit superior photo-efficiencies compared to NPs synthesized using conventional routes, as demonstrated via the photodegradation of the nuclear fast red (NFR) dye.
ABSTRACT
Monolithic, crystalline and highly oriented coordination network compound (CNC) Prussian blue (PB) thin films have been deposited though different routes on conductive substrates. Characterization of the monolithic thin films reveals a long-term stability, even after many redox cycles the crystallinity as well as the high orientation remain intact during the electrochromic switching process.
ABSTRACT
For inorganic semiconductors crystalline order leads to a band structure which gives rise to drastic differences to the disordered material. An example is the presence of an indirect band gap. For organic semiconductors such effects are typically not considered, since the bands are normally flat, and the band-gap therefore is direct. Herein we show results from electronic structure calculations demonstrating that ordered arrays of porphyrins reveal a small dispersion of occupied and unoccupied bands leading to the formation of a small indirect band gap. We demonstrate herein that such ordered structures can be fabricated by liquid-phase epitaxy and that the corresponding crystalline organic semiconductors exhibit superior photophysical properties, including large charge-carrier mobility and an unusually large charge-carrier generation efficiency. We have fabricated a prototype organic photovoltaic device based on this novel material exhibiting a remarkable efficiency.
ABSTRACT
Here, we report for the first time a 'ligand free' method of designing 1D TiOx supramolecular network materials, which starts from Ti bare metal powder. Each TiOx oxidation step has been carefully investigated with different analytical techniques, including high resolution transmission electron microscopy/high resolution scanning electron microscopy (HRTEM/HRSEM), x-ray photoelectron spectroscopy (XPS), Raman spectroscopy and superconducting quantum interference device (SQUID) measurements. The self-assembly of TiOx nanoparticles (NPs) into 1D supramolecular nanoparticle networks is induced by the formation of mixed valent Ti(II,III) species. The synthesis starts with etching a bare Ti surface, followed by a continuous oxidation of TiOx clusters and NPs, and it finally ends with the self-assembly into rigid 1D NPs chains. Today, such self-assembled 1D NP TiOx network materials are bridging the gap between the nanoscale and the macroscopic material world and will further provide interesting research opportunities.
ABSTRACT
Nanoparticles that are made from zinc and titanium oxide have found widespread applications, including their use in sunscreens. However, there is little information regarding their effects on immune cells. In the current study, we synthesized charge stabilized and "ligand free" colloid stable ZnO2 and TiO2 nanoparticles. Most previous published studies commonly used ZnO and TiO2 nanoparticles. In the current study we investigated the comparative toxicity of ZnO2 and TiO2 nanoparticles. Therefore, our results based on ZnO2 which is more oxidative than ZnO provides novel data on the possible toxicity of this species of nanoparticles. First, we investigated the immunomodulatory action of these nanoparticles on human peripheral blood mononuclear cells and their effects on DNA and protein integrity. A minimum concentration of ZnO2 nanoparticles of 1 µg/mL inhibited the production of two inflammatory cytokines: interleukin-1-ß and interleukin 6 by peripheral blood mononuclear cells in the presence of lipopolysaccharides. On the other hand, TiO2 nanoparticles at a concentration range of 0.1-100 µg/mL did not present apparent toxicity to the peripheral blood mononuclear cells. ZnO2 nanoparticles at a minimum concentration of 2 µg/mL caused DNA damage in vitro. TiO2 nanoparticles at a concentration range of 25-100 µg/mL only caused marginal DNA damage. ZnO2 nanoparticles at a minimum concentration of 5 µg/mL were capable of promoting aggregation of malate dehydrogenase, and facilitated its degradation at higher concentrations. Exposure of malate dehydrogenase to TiO2 at a concentration range of 2.5-15 µg/mL did not alter the solubility of malate dehydrogenase. Altogether, our findings suggest that charge stabilized ZnO2 nanoparticles are nascent and interact with DNA and protein and may be harmful to immune cells. In addition, the propensity of ZnO2 nanoparticles to promote protein aggregation could facilitate the production of protein complexes that may interfere with normal immune functions.