História em quadrinhos para educação em saúde bucal: construção, validação e análise da eficácia / Comics for oral health education: construction, validation, and analysis of efficacy

As tecnologias ilustradas tem sido um artifício amplamente utilizado para a educação em saúde bucal, sendo as histórias em quadrinhos um formato ainda pouco explorado no que se refere à validação e análise da sua eficácia para com o público-alvo. Este estudo objetivou avaliar a efetividade de uma história em quadrinhos no processo de educação em saúde bucal a crianças entre 06 e 12 anos atendidas na clínica de Odontopediatria de uma policlínica odontológica na Amazônia brasileira. Uma revista em quadrinhos lúdico-educativa foi confeccionada, validada e incorporada em um kit contendo 01 escova dental, 01 fio dental e 01 creme dental. Posteriormente foi aplicado um questionário com os pais (N=50), antes e depois da entrega dos kits, que avaliava os cuidados de higiene bucal da criança e as impressões sobre o impacto dos quadrinhos sobre a higiene bucal de seus filhos. Os resultados foram analisados descritivamente, por meio de frequências absolutas e porcentagens sendo usado o teste de McNemar (p<0,05). Verificou-se o aumento de 55,32% das crianças que passaram a usar o fio dental após implementação metodológica. Constatou-se, ainda, não haver diferença estatística entre a frequência de escovação após a entrega do kit (p=0.873), havendo, entretanto, aumento significativo na frequência do uso do fio dental entre as crianças avaliadas (p=0.0401). Os quadrinhos mostraram-se estatisticamente eficazes no aumento da frequência do uso do fio dental, tendo a HQ uma boa aceitação tanto das crianças como dos pais.

Illustrated media has been a widely used device for oral health education, with comics being a format that is still under explored in terms of validation and analysis of their effectiveness towards the target audience. This study aimed to evaluate the effectiveness of a comic book in the process of oral health education to children between 6 and 12 years of age attended at the pediatric dentistry clinic of a dental polyclinic in the Brazilian Amazon. A playful-educational comic book was made, validated, and incorporated into a kit containing 01 toothbrush, 01 floss, and 01 toothpaste. Subsequently, a questionnaire was applied with the parents (N=50), before and after the delivery of the kits, which evaluated the child's oral hygiene care and the impressions on the impact of the comics on the oral hygiene of their children. The results were analyzed descriptively, through absolute frequencies and percentages using the McNemar test (p<0.05). There was an increase of 55.32% of the children who started flossing after methodological implementation. It was also found that there was no statistical difference between the frequency of brushing after delivery of the kit (p=0.873), but there was a significant increase in the frequency of flossing among the children evaluated (p=0.0401). The comics were statistically effective in increasing the frequency of flossing, with comic books having a good acceptance of both children and parents.

Effect of hydroelectrolytic and energy beverages on the color stability and fluorescence of composite resins.

The objective of the present study was to assess the influence of energy and hydroelectrolytic beverages on the color stability and fluorescence of composite resins. Three composite resins (Amelogen, Filtek Z350 XT, and Filtek Bulk Fill) were analyzed at 4 different time periods: at baseline (T0) and after 1 (T1), 2 (T2), and 3 (T3) months of storage. Thirty specimens of each material were prepared and divided into subgroups (n = 10) based on the type of solution in which they were immersed for 1 hour a day at 37°C: distilled water (control), Red Bull, and Gatorade. Color stability and fluorescence tests were performed at each timepoint. Three-way repeated-measures analysis of variance (ANOVA) tests were used to evaluate the influences of material, immersion solution, and time on the color stability and fluorescence values (α = 0.05). The Bonferroni test was used as a post hoc test to compare the mean values between the groups (α = 0.05). For color change, ANOVA showed a statistically significant influence of all isolated factors and their interactions. Overall, for all periods of analysis, Amelogen showed significantly higher fluorescence values than the other composite resins after storage in all solutions. In this in vitro study, energy and hydroelectrolytic beverages altered the color stability and fluorescence of the studied materials at all timepoints. The potential for future color alterations should be considered before anterior composite resin restorations are placed in patients who consume high quantities of these beverages.

Effect of whitening dentifrices on the surface roughness of a nanohybrid composite resin.

OBJECTIVES: The present study verified the influence of whitening dentifrices on the surface roughness of a nanohybrid composite resin. MATERIALS AND METHODS: Thirty-two specimens were prepared with Filtek™ Z350 XT (3M/ESPE) and randomly divided into four groups (n = 08) that were subjected to brushing simulation equivalent to the period of 1 month. The groups assessed were a control group with distilled water (G1), Colgate Total 12 Professional Clean (G2), Sensodyne Extra Whitener Extra Fresh (G3), and Colgate Luminous White (G4). A sequence of 90 cycles was performed for all the samples. The initial roughness of each group was analyzed by the Surface Roughness Tester (TR 200-TIME Group Inc., CA, USA). After the brushing period, the final roughness was measured, and the results were statistically analyzed using nonparametric Kruskal-Wallis and Dunn tests for intergroup roughness comparison in the time factor. For intragroup and "Δ Final - Initial" comparisons, the Wilcoxon test and (one-way) ANOVA were, respectively, performed (α = 0.05). RESULTS: The roughness mean values before and after brushing showed no statistically significant difference when the different dentifrices were used. None of the dentifrices analyzed increased significantly the nanohybrid composite resin surface roughness in a 1 month of tooth brushing simulation. CONCLUSIONS: These results suggest that no hazardous effect on the roughness of nanohybrid composite resin can be expected when whitening dentifrices are used for a short period. Similar studies should be conducted to analyze other esthetic composite materials.

A new methodology for fluorescence analysis of composite resins used in anterior direct restorations.

The aim of this study was to use a new methodology to evaluate the fluorescence of composite resins for direct restorations. Microhybrid (group 1, Amelogen; group 2, Opallis; group 3, Filtek Z250) and nanohybrid (group 4, Filtek Z350 XT; group 5, Brilliant NG; group 6, Evolu-X) composite resins were analyzed in this study. A prefabricated matrix was used to prepare 60 specimens of 7.0 × 3.0 mm (n = 10 per group); the composite resin discs were prepared in 2 increments (1.5 mm each) and photocured for 20 seconds. To establish a control group of natural teeth, 10 maxillary central incisor crowns were horizontally sectioned to create 10 discs of dentin and enamel tissues with the same dimensions as the composite resin specimens. The specimens were placed in a box with ultraviolet light, and photographs were taken. Aperture 3.0 software was used to quantify the central portion of the image of each specimen in shades of red (R), green (G), and blue (B) of the RGB color space. The brighter the B shade in the evaluated area of the image, the greater the fluorescence shown by the specimen. One-way analysis of variance revealed significant differences between the groups. The fluorescence achieved in group 1 was statistically similar to that of the control group and significantly different from those of the other groups (Bonferroni test). Groups 3 and 4 had the lowest fluorescence values, which were significantly different from those of the other groups. According to the results of this study, neither the size nor the amount of inorganic particles in the evaluated composite resin materials predicts if the material will exhibit good fluorescence.

Influência do acabamento e polimento de resina composta na resistência adesiva à dentina e no ângulo cavo-superficial em esmalte / The influence of finishing and polishing procedures on dentin bond strength of resin composite and at the interface enamel/restoration

O objetivo desse trabalho foi verificar a influência do procedimento de acabamento e polimento das restaurações de resina composta na resistência adesiva à dentina, através de testes de microtração, assim como, analisar em microscopia eletrônica de varredura a interface dente/restauração no nível do ângulo cavo-superficial. Terceiros molares humanos extraídos e hígidos foram utilizados nesse estudo, após aprovação pelo Comitê de Ética em Pesquisa da FOB-USP. Os dentes foram restaurados com sistema adesivo Solobond M (VOCO) e resina composta Grandio (VOCO) e distribuídos nos seguintes grupos: G1 (controle) - sem acabamento e polimento, G2 - acabamento e polimento imediato, G3 - sem acabamento e polimento e armazenado por sete dias e G4 - acabamento e polimento após sete diasem estufa a 37ºC. Palitos com dimensões de 1mm x 1mm foram obtidos e submetidos a uma força de tração em uma máquina de ensaios universal EMIC à velocidade de 0.5mm/min. Para a análise em microscopia eletrônica de varredura, 20 terceiros molares receberam quatro preparos cavitários com 1mm de diâmetro e 3mm de altura que foram restaurados com o mesmo sistema restaurador utilizado para os testes de resistência adesiva e distribuídos nos mesmos grupos descritos acima. Após a obtenção dos espécimes de cada grupo, os dentes foram metalizados e analisados na interface dente/restauração em microscopia eletrônica de varredura por três examinadores. As médias de resistência adesiva (MPa) e respectivos desvios-padrão foram: G1 - 23,05 (8,62); G2 - 17,34 (6,11); G3 - 21,64 (7,63) e G4 - 18,12 (6,51). Os valores de resistência adesiva submetidos à Anova a um critério e teste de Fisher permitiram concluir que o procedimento de acabamento e polimento das restaurações de resina composta diminuiu significativamente a resistência adesiva à dentina. O teste de Kruskal-Wallis aplicado aos escores obtidos da análise das fendas no ângulo cavo-superficial permitiu determinar que o acabamento e polimento da resina composta não interfere na formação de fendas.